DECR-1400

From PS3 Developer wiki
Jump to: navigation, search

DECR-1400(A/J)[edit]

Specifications[edit]

SubModels DECR-1400A
Type 0x09
Motherboard DEB-001
Flash Storage 1x 16MB NOR
CELL BE / RSX 45nm / 65nm
South Bridge CXD2984GB
Syscon CXR713120-201GB
CP -
BDemu Harddrive
GameOS Harddrive 160GB
Bluray Drive YES
HDMI Ports 1
OtherOS PARTIAL (Until System Firmware 3.20 included)
USB Ports 4
GbLAN Ports 2 (1 for debugger)
Flash Readers No
PS2 mode NO (No Emotion Engine or Graphic Synthesizer on the motherboard, no ps2emu software in the official firmware)
PS1 mode NO (No ps1emu software in the official firmware)
SA-CD NO
WiFi802.11b/g YES
SKU Release date June 2009
SDK / Firmware support =>2.6.0
downgradeable Min. praxis 2.60
Other Uses the same metldr/bootloader builds as CECH-2000 units.

Pictures[edit]

Comparison[edit]

Model Type Board Flash SB Syscon CP BDemu HDD GameOS HDD Bluray Drive HDMI Ports OtherOS CELL BE RSX USB
Ports
GbLan
Ports
Flash
Readers
Support:
PSP
PS2
PS1
SA-
CD
WiFi
802.11
b/g
SKU
Release
date
SDK/FW
support
downgradeable
Min.
praxis
Other
DECR-1000(A/J) 0x01 TMU-520 2x 256MB NAND CXD2973AGB-4 CXR713F120A TCP-520 400GB 400GB  ?0x00? 2 (NO CEC) PARTIAL 90nm 90nm 4 + 2 extra 4 (1 for dbg.) YES  ?YES?
NO
NO
NO YES 2006 =>1.0.0
or
=>2.3.0 (since 1/2009)
<0.85.009 contains prototype components, hardware is much closer to DEH-R1040 than CECHAxx.
DECR-1400A/J 0x09 DEB-001 1x 16MB NOR  ?CXD2984GB? CXR713120-201GB (via SB) - 160 GB  ?0x0A? 1 (NO CEC) PARTIAL 45nm 65nm 4 2 (1 for dbg.) NO  ?YES?
NO
NO
NO YES 6/2009 =>2.6.0 =>?2.60? same case as retail PS3

Differences between the 1000 and 1400:

  • DECR-1000:
    • Gb-DEVLAN is connected to the Communication Processor
    • With a pre 0.85.009 bootrom you do have two HDMI outputs.
    • Not all DECR-1000 are equal! Despite Sony's documentation claiming otherwise, DECR-1000 units with RSX rom version b07 and above such as refurbished/serviced units (and perhaps some others that have not been encounter) are not capable of running any firmware lower than 1.60 (from sdk 160.008) this is because the rom version is unknown/unsupported in older lv1 which will fail to initialize the RSX hardware and will cause lv1 to output a "rsx rom abort!" message, this will in turn create an exception early in lv2 boot process as it tries to use the RSX and creates a hard brick several RSX related errors such as "lv2(2): # __rsxaudio_intr_create_thread 983 ffffffff" or "graphics error 512 : 00012625 c221bbb0" ; "lv2(2): page fault handler (DSI): invalid access address 0x795d00e8!".
  • DECR-1400:
    • You cannot use Performance monitoring functions (libperf, libprof, tuner for PS3)
      • for SPU: PC sampling, Performance counters, Bookmark, RAW SPU support
      • for RSX: Signal Trace, User Events.
    • DECI3 is limited to one protocol and a data exchange size of 65535 bytes.
    • The two GbLAN´s share the same MAC ID and cannot be used in the same network segment.
    • Gb-DEVLAN is connected to South Bridge.