Disc Identification/Serialization Data

From PS3 Developer wiki
Revision as of 10:10, 30 June 2013 by Ada L0ve Lace (talk | contribs) (→‎IFPI Code: wiki format)
Jump to navigation Jump to search

IFPI Code

International Federation of the Phonographic Industry

synonym: SID-Code

  • location: innerring outside datasection
  • length:
  • sample:
Tip
Mould SID Codes will consist of the letters “IFPI” followed by a four or five digit code.

The first two digits (in the case of a four digit SID Code) or the first three digits (in the case of a five digit SID Code) are assigned to the operator of the manufacturing or mastering plant. The last two digits of this code are allocated to give each mould on the site.

Using alphanumeric digits consisting of the numbers 0 through 9 and the letters of the Western alphabet A through Z,excluding “I”, “O”, “S” and “Q”, the plant has the ability to assign unique codes to 1,024 different mould code.
Tip
Each Mastering SID Code that is assigned will consist of the digits “IFPI” followed by a four or five digit code commencing with the letter “L”.


Patents and references

Cutting Burst Area (CBA)

synonym: Burst Cutting Area (BCA)

  • location: innerring inside datasection
  • radius: 22.3 to 23.5mm
  • datasize: 12 bytes to 188 bytes in steps of 16 bytes
  • sample:

Patents and references


PIC Zone

  • location: within the Cutting Burst Area (CBA)
  • datasize: 0x73 bytes
  • sample:

Patents and references


Angular Marks

  • location: in the data area, outside the Cutting Burst Area (CBA)
  • sample:

Patents and references

ROM Mark

  • location:
  • length:
  • sample:

Patents and references


Generic References