The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Fuse (TH3401) as seen on CECHCxx

Protection devices (IC Link / Thermistors / Fuses)

IC Link

Link IC PS3501 (1.2A/72V)

PS3501 1-576-282-21 LINK, SQUARE CHIP TYPE IC (1.2A/72V)
used to protect IC3502 (MM1761KHBE) pin 8 (VIN), comes from +3.3V_MISC

Link IC PS6001 (2A/72V)

PS6001 1-533-282-21 LINK, IC (2A/72V)
used to protect Q6001 FDQ7238AS (if this fuse fails input regulators of +3.3V_MISC wont get power and console shuts down in 2 seconds), comes from CN6004 pin 1 (+12V_MAIN)

Thermistors

Thermistor, Positive

COK-001

1-802-276-11 TH2401, TH2501

TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) OnSemi MC78M05CDTRK (500 mA Positive Voltage Regulators).

TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the HDMI output connector and is feeded by +5V_ANA via R2553 0 Ohm.

COK-002

1-802-276-11 TH2401, TH2501

TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) OnSemi MC78M05CDTRK (500 mA Positive Voltage Regulators).

TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the HDMI output connector and is feeded by +5V_ANA via R2553 0 Ohm.

SEM-001

1-805-726-11 TH2401, TH2501

TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) TK73350RTL-G (500 mA Positive Voltage Regulators).

TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the HDMI output connector and is feeded by +5V_ANA via R2553 0 Ohm.

VER-001

1-878-196-21 TH2401

TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) TK73350RTL-G (500 mA Positive Voltage Regulators).

Thermistor, Positive

COK-001

1-802-243-11 TH3202, TH3301, TH3302, TH3401, TH3702, TH6001

TH3202 : is used for CN3219 15P (Multi_Card_Board) - pin9 +5V_USB, pin10 +5V_USB, pin11 +5V_USB, pin12 +5V_USB.

TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB

TH3302 : is used to protect IC3304 (USB Power) BD6517F pin7 VDD via R3350 0 Ohm. Is feeded by +5V_USB

TH3401 : is used for CN3401 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD

TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC

TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD

COK-002

1-802-243-11 TH3202, TH3301, TH3302, TH3401, TH3702, TH6001

TH3202 : is used for CN3219 15P (Multi_Card_Board) - pin9 +5V_USB, pin10 +5V_USB, pin11 +5V_USB, pin12 +5V_USB.

TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB

TH3302 : is used to protect IC3304 (USB Power) BD6517F pin7 VDD via R3350 0 Ohm. Is feeded by +5V_USB

TH3401 : is used for CN3401 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD

TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC

TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD

SEM-001

1-802-243-11 TH3280, TH3301, TH3702, TH6001

TH3280 : is used for CN3280 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD

TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB

TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC

TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD

VER-001

1-878-196-21 TH3280, TH3301, TH6001

TH3280 : is used for CN3280 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD

TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB

TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD

Thermistor, Positive

COK-001

1-802-277-11 TH3203, TH3204, TH3701, TH4001, TH4002

TH3203 : is used for CN3221 60P (BD ATA0) - pin 60 +3.3V_EVER

TH3204 : is used for CN3221 60P (BD ATA0) - pin pin 22 (XIRDY / /SB_ATA0_IORDY) via R3248 4700 Ohm, gets feeded from +3.3V_SB_VDDIO

TH3701 : is used for CN3701 33P (Wifi Board) - pin 1 +5V_EVER

TH4001 : is used for CN4010 10P (Power/Reset Board) - pin 1 +5V_EVER

TH4002 : is used for CN4010 10P (Power/Reset Board) - pin 6 (/eject_sw) via R4073 10K Ohm and CN4010 10P - pin 7 (/power_sw) via R4074 10K Ohm.

COK-002

1-802-277-11 TH3203, TH3204, TH3701, TH4001, TH4002

TH3203 : is used for CN3221 60P (BD ATA0) - pin 60 +3.3V_EVER

TH3204 : is used for CN3221 60P (BD ATA0) - pin pin 22 (XIRDY / /SB_ATA0_IORDY) via R3248 4700 Ohm, gets feeded from +3.3V_SB_VDDIO

TH3701 : is used for CN3701 33P (Wifi Board) - pin 1 +5V_EVER

TH4001 : is used for CN4010 10P (Power/Reset Board) - pin 1 +5V_EVER

TH4002 : is used for CN4010 10P (Power/Reset Board) - pin 6 (/eject_sw) via R4073 10K Ohm and CN4010 10P - pin 7 (/power_sw) via R4074 10K Ohm.

SEM-001

1-805-762-11 TH3401, TH3402, TH3701, TH4001, TH4002

TH3401 : is used for CN3221 60P (BD ATA0) - pin 22 (XIRDY / /SB_ATA0_IORDY) via R3248 4700 Ohm, gets feeded from +3.3V_SB_VDDIO

TH3402 : is used for CN3221 60P (BD ATA0) - pin 60 +3.3V_EVER

TH3701 : is used for CN3701 33P (Wifi Board) - pin 1 +5V_EVER

TH4001 : is used for Power/Reset circuit, feeded by +5V_EVER

TH4002 : is used for Power/Reset circuit, going to IC4002 CXR713120-203GB-TL port E:pad A12 EJECT_SW via R4073 4700 Ohm and going to IC4002 CXR713120-203GB-TL port E:pad B12 /POW_SW via R4074 4700 Ohm, is feeded by +3.3V_EVER

VER-001

TH4002 : is used for Power/Reset circuit, going to IC4002 CXR713120-203GB-TL port E:pad A12 EJECT_SW via R4073 4700 Ohm and going to IC4002 CXR713120-203GB-TL port E:pad B12 /POW_SW via R4074 4700 Ohm, is feeded by +3.3V_EVER

TH3201 : Undocumented

Thermistor, Positive

COK-001

1-802-283-11 TH6002

TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD

COK-002

1-802-283-11 TH6002

TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD

SEM-001

1-802-246-11 TH6002

TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD

VER-001

TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD

Fuses

Fuse, Chip (3216) (5A/32V)

COK-001

1-576-679-11 F6001, F6301, F6302, F6303, F6304

F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN

F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN

F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO, +1.2V_EEGS_VDD/DIG_+1.2V1 and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN

F6303 : Used to protect Q6308 SI4866DY-T1-E3 (if this fuse fails input regulators of +1.5V_YC_RC_VDDA wont get power). Gets feeded by +1.7V_MISC

F6304 : Used to protect Q6301 FDQ7238AS (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +5V_EVER

COK-002

1-576-679-11 F6001, F6301, F6302, F6303, F6304

F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN

F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN

F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO, +1.2V_GX_VDDC and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN

F6303 : Used to protect Q6308 SI4866DY-T1-E3 (if this fuse fails input regulators of +1.5V_YC_RC_VDDA wont get power). Gets feeded by +1.7V_MISC

F6304 : Used to protect Q6301 FDQ7238AS (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +5V_EVER

SEM-001

F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN

F6002 : Used to protect Q6005 SI489ADY-T1 (if this fuse fails input regulators of +3.3V_MISC wont get power and console shuts down in 2 seconds). Gets feeded by +12V_MAIN

F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN

F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN

F6304 : Used to protect Q6311 SI4391DY-T1-E3 (if this fuse fails input regulators of +1.2V_BE_VCS wont get power). Gets feeded by +12V_MAIN

F6305 : Used to protect Q6601 SI4830ADY-T1 (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +12V_MAIN

VER-001

F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN

F6002 : Used to protect Q6005 SI489ADY-T1 (if this fuse fails input regulators of +3.3V_MISC wont get power and console shuts down in 2 seconds). Gets feeded by +12V_MAIN

F6003 : Undocumented

F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN

F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN