Error Codes

Error Code shown in the 'Report Problem' screen

Page definition and crossreference

Here you can post all the known PS4 errors.

PS3 / PS Vita / PS4 Error equivalent pages for crossreference.

Error Code Structure

The errors that occur in libraries included in the SDK and in the system software are each allocated a hexadecimal error code with a macro constant for handling by applications, as well as a short error code to display for users.

Macro constant          | Hexadecimal Error Code | Short Error Code
SCE_KERNEL_ERROR_ENOENT | 0x80020002             | CE-30002-5

The error codes returned by libraries and the system software are hexadecimal error codes. The hexadecimal error codes are 32-bit negative numbers with the upper 16 bits representing the library or module where the error occurred. Short error codes are character strings consisting of a two letter facility group ("CE", "NW", "NP", etc.) and a 5+1 digit short error number connected by hyphens.

Short Error Code | Facility Group | Short Error Number
CE-30002-5       | CE             | 30002-5

Exceptional errors that are not allocated a short error number will be displayed for users as short error codes using "E" and the hexadecimal error code connected by a hyphen.

Short Error Code | Facility Group | Hexadecimal Error Code
E-80000000       | E              | 80000000

Error History

[System] > [Error History] contains the last 100 errors

When the console encounters an error, the crash reporter sends a 74 byte tcp packet and then retrieves a config file pertaining to the crash. Upon sending the 74 byte tcp packet, the software has regained full control/operational stability and has fully recovered from the crash. By comparing the timestamps of the systems error logs with the 74 byte packet and examining the traffic during the crash,one can infer what's occurring during the crash and also accurately determine when the software has recovered from the crash.

Errorcode / Returncode lists

A measly list can be found at : https://support.us.playstation.com/app/answers/detail/a_id/5111 (which should be fully covered here anyhow)

C0

Name	Errorcode	Returncode	Remarks

C1

Name	Errorcode	Returncode	Remarks

C2

Name	Errorcode	Returncode	Remarks

C3

Name	Errorcode	Returncode	Remarks

C4

Name	Errorcode	Returncode	Remarks

CD

Name	Errorcode	Returncode	Remarks
	CD-30774-1		Update data could not be found.

CE - Common Errors

Name	Errorcode	Returncode	Remarks
SCE_KERNEL_ERROR_EPERM	CE-30001-4	0x80020001	Operation not permitted / An error has occurred (error with the application) // Close the application and then restart it. Reboot the console. If the issue continues, there may be a temporary issue with the server. Try again later.
SCE_KERNEL_ERROR_ENOENT	CE-30002-5	0x80020002	Application data may be corrupted // Turn off the console and reboot in Safe Mode. Connect a controller via a USB cable and select [Update System Software]. If the error occurs in a specific application, delete and reinstall it.
SCE_KERNEL_ERROR_ESRCH	CE-30003-6	0x80020003	Problem with the network connection // If in a party, reboot the console after leaving the party, then rejoin the party. Turn off your router and modem for at least 5 minutes, then turn it back on. If the situation does not improve, this may be a temporary issue. Try again later.
SCE_KERNEL_ERROR_EINTR	CE-30004-7	0x80020004	Interrupted system call
SCE_KERNEL_ERROR_EIO	CE-30005-8	0x80020005	Input/output error / Error occurred when accessing the HDD or Blu-Ray drive (console having issues reading from the HDD or Blu-Ray player) // Step 1: Eject the disc from the console, and check that the disc is not dirty, scratched or damaged. Step 2: If the disc is in good condition try rebuilding the console's database using Safe Mode option 5. If the error persists, the console may be bad and in need of service. Contact PlayStation Support.
SCE_KERNEL_ERROR_ENXIO	CE-30006-9	0x80020006	Device not configured / Error occurred while accessing the data // Step 1: If this error occurs when connecting a USB device, try another USB device. Step 2: If you changed the console's internal HDD, replace the original HDD included with your console and try again. If this error occurs while using an external HDD, there may be a problem with the connected HDD. Reconnect the HDD and select [Restore File System]. Format the HDD again. If the issue persists, try another HDD.
SCE_KERNEL_ERROR_E2BIG	CE-30007-0	0x80020007	Argument list too long
SCE_KERNEL_ERROR_ENOEXEC	CE-30008-1	0x80020008	Exec format error / Error occurred while launching the content // Reboot the console. Delete the application and install it again. If using a disc, make sure there are no fingerprints, smudges or scratches. Clean and wipe the disc with a soft, clean cloth. This may be a temporary issue, try again later.
SCE_KERNEL_ERROR_EBADF	CE-30009-2	0x80020009	Bad file descriptor
SCE_KERNEL_ERROR_ECHILD	CE-30010-4	0x8002000A	No child processes
SCE_KERNEL_ERROR_EDEADLK	CE-30011-5	0x8002000B	Resource deadlock avoided
SCE_KERNEL_ERROR_ENOMEM	CE-30012-6	0x8002000C	Cannot allocate memory / Internal error // Step 1: Update the PS4 system with the latest system software. Step 2: If the software is up to date and the error continues, backup all saved data. Delete the application with the error and install it again.
SCE_KERNEL_ERROR_EACCES	CE-30013-7	0x8002000D	Permission denied
SCE_KERNEL_ERROR_EFAULT	CE-30014-8	0x8002000E	Bad address
SCE_KERNEL_ERROR_ENOTBLK	CE-30015-9	0x8002000F	Block device required
SCE_KERNEL_ERROR_EBUSY	CE-30016-0	0x80020010	Device busy
SCE_KERNEL_ERROR_EEXIST	CE-30017-1	0x80020011	File exists
SCE_KERNEL_ERROR_EXDEV	CE-30018-2	0x80020012	Cross-device link
SCE_KERNEL_ERROR_ENODEV	CE-30019-3	0x80020013	Operation not supported by device
SCE_KERNEL_ERROR_ENOTDIR	CE-30020-5	0x80020014	Not a directory
SCE_KERNEL_ERROR_EISDIR	CE-30021-6	0x80020015	Is a directory
SCE_KERNEL_ERROR_EINVAL	CE-30022-7	0x80020016	Invalid argument / An internal error occurred // Reboot the application. Reboot the console. Back up saved data and initialize the console. If the error occurs while using a HDD, the connected HDD may be having problems. Reconnect the HDD and [Restore File System]. Format the HDD. If the error persists, try another HDD.
SCE_KERNEL_ERROR_ENFILE	CE-30023-8	0x80020017	Too many open files in system
SCE_KERNEL_ERROR_EMFILE	CE-30024-9	0x80020018	Too many open files
SCE_KERNEL_ERROR_ENOTTY	CE-30025-0	0x80020019	Inappropriate ioctl for device
SCE_KERNEL_ERROR_ETXTBSY	CE-30026-1	0x8002001A	Text file busy
SCE_KERNEL_ERROR_EFBIG	CE-30027-2	0x8002001B	File too large / Internal error // Step 1: Restart the application. Step 2: Reboot the console. Step 3: Back up all saved data and initialize the console. If this error occurs while using an external HDD, there may be a problem with the connected HDD. Reconnect the HDD and perform [Restore File System]. Format the HDD again. If the issue persists, try another HDD.
SCE_KERNEL_ERROR_ENOSPC	CE-30028-3	0x8002001C	No space left on device / Error occurred while reading system storage or saved data // Step 1: Reboot the console. Step 2: Create new save data and try with the new data. If it works, the previous save may be corrupted. Step 3: Delete the application and install it again. Step 4: Turn off console and reboot into Safe Mode and select [Rebuild Database]. Step 5: If the issue persists, go into Safe Mode and select [Initialize PS4] (back up all data before performing this).
SCE_KERNEL_ERROR_ESPIPE	CE-30029-4	0x8002001D	Illegal seek
SCE_KERNEL_ERROR_EROFS	CE-30030-6	0x8002001E	Read-only filesystem
SCE_KERNEL_ERROR_EMLINK	CE-30031-7	0x8002001F	Too many links
SCE_KERNEL_ERROR_EPIPE	CE-30032-8	0x80020020	Broken pipe
SCE_KERNEL_ERROR_EDOM	CE-30033-9	0x80020021	Numerical argument out of domain
SCE_KERNEL_ERROR_ERANGE	CE-30034-0	0x80020022	Result too large
SCE_KERNEL_ERROR_EAGAIN	CE-30035-1	0x80020023	Resource temporarily unavailable / Try again after a while // Temporary issue caused by multiple overlapping operations on console. Turn off the console and unplug it, plug it back in and reboot the console. If the error persists there may be ongoing downloads or installations in progress. Wait for these to finish before trying again.
SCE_KERNEL_ERROR_EWOULDBLOCK	CE-30035-1	0x80020023	Operation would block (SCE_KERNEL_ERROR_EAGAIN)
SCE_KERNEL_ERROR_EINPROGRESS	CE-30036-2	0x80020024	Operation now in progress
SCE_KERNEL_ERROR_EALREADY	CE-30037-3	0x80020025	Operation already in progress
SCE_KERNEL_ERROR_ENOTSOCK	CE-30038-4	0x80020026	Socket operation on non-socket
SCE_KERNEL_ERROR_EDESTADDRREQ	CE-30039-5	0x80020027	Destination address required
SCE_KERNEL_ERROR_EMSGSIZE	CE-30040-7	0x80020028	Message too long
SCE_KERNEL_ERROR_EPROTOTYPE	CE-30041-8	0x80020029	Protocol wrong type for socket
SCE_KERNEL_ERROR_ENOPROTOOPT	CE-30042-9	0x8002002A	Protocol not available
SCE_KERNEL_ERROR_EPROTONOSUPPORT	CE-30043-0	0x8002002B	Protocol not supported
SCE_KERNEL_ERROR_ESOCKTNOSUPPORT	CE-30044-1	0x8002002C	Socket type not supported
SCE_KERNEL_ERROR_ENOTSUP	CE-30045-2	0x8002002D	Operation not supported
SCE_KERNEL_ERROR_EPFNOSUPPORT	CE-30046-3	0x8002002E	Protocol family not supported
SCE_KERNEL_ERROR_EAFNOSUPPORT	CE-30047-4	0x8002002F	Address family not supported by protocol family
SCE_KERNEL_ERROR_EADDRINUSE	CE-30048-5	0x80020030	Address already in use
SCE_KERNEL_ERROR_EADDRNOTAVAIL	CE-30049-6	0x80020031	Can't assign requested address
SCE_KERNEL_ERROR_ENETDOWN	CE-30050-8	0x80020032	Network is down
SCE_KERNEL_ERROR_ENETUNREACH	CE-30051-9	0x80020033	Network is unreachable
SCE_KERNEL_ERROR_ENETRESET	CE-30052-0	0x80020034	Network dropped connection on reset
SCE_KERNEL_ERROR_ECONNABORTED	CE-30053-1	0x80020035	Software caused connection abort
SCE_KERNEL_ERROR_ECONNRESET	CE-30054-2	0x80020036	Connection reset by peer
SCE_KERNEL_ERROR_ENOBUFS	CE-30055-3	0x80020037	No buffer space available
SCE_KERNEL_ERROR_EISCONN	CE-30056-4	0x80020038	Socket is already connected
SCE_KERNEL_ERROR_ENOTCONN	CE-30057-5	0x80020039	Socket is not connected
SCE_KERNEL_ERROR_ESHUTDOWN	CE-30058-6	0x8002003A	Can't send after socket shutdown
SCE_KERNEL_ERROR_ETOOMANYREFS	CE-30059-7	0x8002003B	Too many references: can't splice
SCE_KERNEL_ERROR_ETIMEDOUT	CE-30060-9	0x8002003C	Operation timed out
SCE_KERNEL_ERROR_ECONNREFUSED	CE-30061-0	0x8002003D	Connection refused
SCE_KERNEL_ERROR_ELOOP	CE-30062-1	0x8002003E	Too many levels of symbolic links
SCE_KERNEL_ERROR_ENAMETOOLONG	CE-30063-2	0x8002003F	File name too long
SCE_KERNEL_ERROR_EHOSTDOWN	CE-30064-3	0x80020040	Host is down
SCE_KERNEL_ERROR_EHOSTUNREACH	CE-30065-4	0x80020041	No route to host
SCE_KERNEL_ERROR_ENOTEMPTY	CE-30066-5	0x80020042	Directory not empty
SCE_KERNEL_ERROR_EPROCLIM	CE-30067-6	0x80020043	Too many processes
SCE_KERNEL_ERROR_EUSERS	CE-30068-7	0x80020044	Too many users
SCE_KERNEL_ERROR_EDQUOT	CE-30069-8	0x80020045	Disc quota exceeded
SCE_KERNEL_ERROR_ESTALE	CE-30070-0	0x80020046	Stale NFS file handle
SCE_KERNEL_ERROR_EREMOTE	CE-30071-1	0x80020047	Too many levels of remote in path
SCE_KERNEL_ERROR_EBADRPC	CE-30072-2	0x80020048	RPC struct is bad
SCE_KERNEL_ERROR_ERPCMISMATCH	CE-30073-3	0x80020049	RPC version wrong
SCE_KERNEL_ERROR_EPROGUNAVAIL	CE-30074-4	0x8002004A	RPC prog. not avail
SCE_KERNEL_ERROR_EPROGMISMATCH	CE-30075-5	0x8002004B	Program version wrong
SCE_KERNEL_ERROR_EPROCUNAVAIL	CE-30076-6	0x8002004C	Bad procedure for program
SCE_KERNEL_ERROR_ENOLCK	CE-30077-7	0x8002004D	No locks available
SCE_KERNEL_ERROR_ENOSYS	CE-30078-8	0x8002004E	Function not implemented
SCE_KERNEL_ERROR_EFTYPE	CE-30079-9	0x8002004F	Inappropriate file type or format
SCE_KERNEL_ERROR_EAUTH	CE-30080-1	0x80020050	Authentication error
SCE_KERNEL_ERROR_ENEEDAUTH	CE-30081-2	0x80020051	Need authenticator
SCE_KERNEL_ERROR_EIDRM	CE-30082-3	0x80020052	Identifier removed
SCE_KERNEL_ERROR_ENOMSG	CE-30083-4	0x80020053	No message of desired type
SCE_KERNEL_ERROR_EOVERFLOW	CE-30084-5	0x80020054	Value too large to be stored in data type
SCE_KERNEL_ERROR_ECANCELED	CE-30085-6	0x80020055	Operation canceled
SCE_KERNEL_ERROR_EILSEQ	CE-30086-7	0x80020056	Illegal byte sequence
SCE_KERNEL_ERROR_ENOATTR	CE-30087-8	0x80020057	Attribute not found
SCE_KERNEL_ERROR_EDOOFUS	CE-30088-9	0x80020058	Programming error / Error occurred when starting the game (problem with application) // Reboot the console. Delete the application and install it again. If the situation doesn't improve, back up all saved data and initialize the console.
SCE_KERNEL_ERROR_EBADMSG	CE-30089-0	0x80020059	Bad message
SCE_KERNEL_ERROR_EMULTIHOP	CE-30090-2	0x8002005A	Multi-hop attempted
SCE_KERNEL_ERROR_ENOLINK	CE-30091-3	0x8002005B	Link has been severed
SCE_KERNEL_ERROR_EPROTO	CE-30092-4	0x8002005C	Protocol error
SCE_KERNEL_ERROR_ENOTCAPABLE	CE-30093-5	0x8002005D	Capabilities insufficient
SCE_KERNEL_ERROR_ECAPMODE	CE-30094-6	0x8002005E	Not permitted in capability mode
SCE_KERNEL_ERROR_ENOBLK	CE-30095-7	0x8002005F	Block not ready
SCE_SBL_ERROR_SRTC_EPOWER	CE-30391-6	0x800F0530	System Error. // Your system likely needs to be serviced. Please visit our Contact page to set up service.
SCE_SBL_ERROR_SRTC_ECLOCK	CE-30392-7	0x800F0531	Hardware Error. // Your system likely needs to be serviced. Please visit our Contact page to set up service. Check system clock / time. If it's reset, change CMOS battery and test. If that fails and/or is OK, replace Mediacon (Southbridge) IC.
SCE_SBL_ERROR_SRTC_ENOTINITIALIZED	CE-30393-8	0x800F0532	Error Strc Enotinitialized
SCE_SBL_ERROR_SRTC_EXPIRED	CE-30394-9	0x800F0533	Error Strc Expired
SCE_SBL_ERROR_SRTC_EFORMAT	CE-30395-0	0x800F0534	Error Strc Eformat
SCE_SBL_ERROR_SRTC_EAUTHFAIL	CE-30396-1	0x800F0535	Error Strc Eauthfail
SCE_SBL_ERROR_SRTC_KEY_DIFFER	CE-30397-2	0x800F0536	Error Strc Key differ
SCE_SBL_ERROR_DEVACT_EPERM	CE-30398-3	0x800F0601	Error Devact Eperm
SCE_SBL_ERROR_DEVACT_ENOENT	CE-30399-4	0x800F0602	Error Devact Enoent
SCE_SBL_ERROR_NPDRM_EACCES	CE-30550-3	0x800F0A0D	Error Npdrm Eacces
SCE_SBL_ERROR_NPDRM_EFAULT	CE-30551-4	0x800F0A0E	Error Npdrm Efault
SCE_SBL_ERROR_NPDRM_EBUSY	CE-30552-5	0x800F0A10	Error Npdrm Ebusy
SCE_SBL_ERROR_NPDRM_EEXIST	CE-30553-6	0x800F0A11	Error Npdrm Eexist
SCE_SBL_ERROR_NPDRM_ENODEV	CE-30554-7	0x800F0A13	Error Npdrm Enodev
SCE_SBL_ERROR_NPDRM_EINVAL	CE-30555-8	0x800F0A16	Error Npdrm Einval
SCE_SBL_ERROR_NPDRM_ENOSPC	CE-30556-9	0x800F0A1C	Error Npdrm Enospc
SCE_SBL_ERROR_NPDRM_ERANGE	CE-30557-0	0x800F0A22	Error Npdrm Erange
SCE_SBL_ERROR_NPDRM_EFMT	CE-30558-1	0x800F0A23	Error Npdrm Efmt
SCE_SBL_ERROR_NPDRM_ESIGN	CE-30559-2	0x800F0A24	Cannot start the application.
SCE_SBL_ERROR_AUTHMGR_ESTACK	CE-30600-9	0x800F0B29	Error Authmgr Estack
SCE_SBL_ERROR_AUTHMGR_ENEEDAUTH	CE-30601-0	0x800F0B2A	Error Authmgr Eneedauth
SCE_SBL_ERROR_AUTHMGR_EBADMSG	CE-30602-1	0x800F0B2B	Error Authmgr Ebadmsg
SCE_SBL_ERROR_AUTHMGR_EREVOKED	CE-30603-2	0x800F0B2C	Error Authmgr Erevoked
SCE_SBL_ERROR_AUTHMGR_ENOATTR	CE-30604-3	0x800F0B2D	Error Authmgr Enoattr
SCE_SBL_ERROR_AUTHMGR_EVER	CE-30605-4	0x800F0B2E	Error Authmgr Ever
SCE_SBL_ERROR_AUTHMGR_EPLATFORM	CE-30606-5	0x800F0B2F	Error Authmgr Ever
SCE_SBL_ERROR_AUTHMGR_EPOWER	CE-30607-6	0x800F0B30	Error Authmgr Epower
SCE_SBL_ERROR_AUTHMGR_ECLOCK	CE-30608-7	0x800F0B31	Hardware Error. // Your system likely needs to be serviced. Please visit our Contact page to set up service.
SCE_SBL_ERROR_AUTHMGR_ENOTINITIALIZED	CE-30609-8	0x800F0B32	Error Authmgr Enotinitialized
SCE_SBL_ERROR_AUTHMGR_EXPIRED	CE-30610-0	0x800F0B33	Error Authmgr Expired
SCE_SBL_ERROR_AUTHMGR_EFORMAT	CE-30611-1	0x800F0B34	Error Authmgr Eformat
SCE_SBL_ERROR_AUTHMGR_EAUTHFAIL	CE-30612-2	0x800F0B35	Error Authmgr Eauthfail
SCE_SBL_ERROR_AUTHMGR_KEY_DIFFER	CE-30613-3	0X800F0B36	Error Authmgr Key Differ
SCE_SYSFILE_ERROR_NOMEM	CE-30614-4	0x80120001	Out-of-memory
SCE_SYSFILE_ERROR_IO	CE-30615-5	0x80120002	File IO error
SCE_SYSFILE_ERROR_INVAL	CE-30616-6	0x80120003	Invalid parameters
SCE_SYSFILE_ERROR_BADMAGIC	CE-30617-7	0x80120004	Invalid MAGIC code (system file broken)
SCE_SYSFILE_ERROR_KEYNOTFOUND	CE-30618-8	0x80120005	Key's not found (system file broken)
SCE_SYSFILE_ERROR_KEYDUPLICATION	CE-30619-9	0x80120006	Duplication of key (system file broken)
SCE_SYSFILE_ERROR_BADVERSION	CE-30620-1	0x80120007	Invalid version (system file broken)
SCE_SYSFILE_ERROR_OVER_DATABUFSIZE	CE-30621-2	0x80120008	Invalid data size (system file broken)
SCE_SAFEMODE_ERROR_ENOMEM	CE-30772-9	0x80190001	Out-of-memory
SCE_SAFEMODE_ERROR_KILL	CE-30773-0	0x80190002	Error Kill
SCE_SAFEMODE_ERROR_NOT_FOUND	CE-30774-1	0x80190030	Cannot update (could not update via USB device) // The PS4 system software could not be updated using a USB storage device. Try updating via the Internet instead. If this is not possible, make sure the USB storage device is formatted as FAT or exFAT. Check that the update file is stored in the correct file structure. If the issue continues, delete the download file from the USB drive and download it again.
SCE_SAFEMODE_ERROR_INVAL	CE-30775-2	0x80190031	Error Inval
SCE_SAFEMODE_ERROR_STAT	CE-30776-32	0x80190060	Error Start
SCE_SAFEMODE_ERROR_OPEN_READ	CE-30777-4	0x80190061	Error Open Read
SCE_SAFEMODE_ERROR_OPEN_WRITE	CE-30778-5	0x80190062	Error Open Write
SCE_SAFEMODE_ERROR_CLOSE	CE-30779-6	0x80190063	Error Close
SCE_SAFEMODE_ERROR_READ	CE-30780-8	0x80190064	Error Read
SCE_SAFEMODE_ERROR_WRITE	CE-30781-9	0x80190065	Error Write
SCE_SAFEMODE_ERROR_NMOUNT_USB	CE-30784-2	0x80190068	PS4 failed to detect USB device // Step 1: Verify that the USB device supports USB 2.0 or 3.0. Step 2: Ensure the device is properly inserted in the PS4, and then wait one minute before trying to access the device again. Step 3: Make sure there are not multiple partitions on the device. Step 4: Try reformatting the device using a PC if possible.
	CE-30785-3		USB device not recognized in safe mode // Step 1: Ensure the device is properly inserted in the PS4. Step 2: Wait about one minute and try updating again. Step 3: If the problem persists, initialize USB storage device on a PC, download the update file from system software update page, then put it in the specified folder and update again from the USB storage device.
SCE_USBD_ERROR_IO	CE-30791-0	0x80240001	I/O error
SCE_USBD_ERROR_INVALID_ARG	CE-30792-1	0x80240002	Invalid argument
SCE_USBD_ERROR_ACCESS	CE-30793-2	0x80240003	Permission denied
SCE_USBD_ERROR_NO_DEVICE	CE-30794-3	0x80240004	No such device
SCE_USBD_ERROR_NOT_FOUND	CE-30795-4	0x80240005	Resource not found
SCE_USBD_ERROR_BUSY	CE-30796-5	0x80240006	Resource busy
SCE_USBD_ERROR_TIMEOUT	CE-30797-6	0x80240007	Timer expired
SCE_USBD_ERROR_OVERFLOW	CE-30798-7	0x80240008	Value too large to be stored in data type
SCE_USBD_ERROR_PIPE	CE-30799-8	0x80240009	Broken pipe
SCE_USBD_ERROR_INTERRUPTED	CE-30800-1	0x8024000A	Interrupted system call
SCE_USBD_ERROR_NO_MEM	CE-30801-2	0x8024000B	Not enough core
SCE_USBD_ERROR_NOT_SUPPORTED	CE-30802-3	0x8024000C	Operation not supported
SCE_USBD_ERROR_FATAL	CE-30803-4	0x802400FF	Fatal error
SCE_AUDIO_OUT_ERROR_NOT_OPENED	CE-30804-5	0x80260001	Tried to perform an operation (play release or get number of remaining samples) for the port not opened
SCE_AUDIO_OUT_ERROR_BUSY	CE-30805-6	0x80260002	Tried to output while outputting audio
SCE_AUDIO_OUT_ERROR_INVALID_PORT	CE-30806-7	0x80260003	Invalid port number
SCE_AUDIO_OUT_ERROR_INVALID_POINTER	CE-30807-8	0x80260004	Invalid pointer
SCE_AUDIO_OUT_ERROR_PORT_FULL	CE-30808-9	0x80260005	Cannot reserve a port(channel) any more
SCE_AUDIO_OUT_ERROR_INVALID_SIZE	CE-30809-0	0x80260006	Invalid sample length specified
SCE_AUDIO_OUT_ERROR_INVALID_FORMAT	CE-30810-2	0x80260007	Invalid audio format
SCE_AUDIO_OUT_ERROR_INVALID_SAMPLE_FREQ	CE-30811-3	0x80260008	Invalid sampling frequency
SCE_AUDIO_OUT_ERROR_INVALID_VOLUME	CE-30812-4	0x80260009	Invalid volume value
SCE_AUDIO_OUT_ERROR_INVALID_PORT_TYPE	CE-30813-5	0x8026000A	Invalid port type
SCE_AUDIO_OUT_ERROR_INVALID_CONF_TYPE	CE-30814-6	0x8026000C	Invalid config type
SCE_AUDIO_OUT_ERROR_OUT_OF_MEMORY	CE-30815-7	0x8026000D	Not enough memory
SCE_AUDIO_OUT_ERROR_ALREADY_INIT	CE-30816-8	0x8026000E	already initialized
SCE_AUDIO_OUT_ERROR_NOT_INIT	CE-30817-9	0x8026000F	not initialized
SCE_AUDIO_OUT_ERROR_MEMORY	CE-30818-0	0x80260010	memory handling error
SCE_AUDIO_OUT_ERROR_SYSTEM_RESOURCE	CE-30819-1	0x80260011	system resourc error
SCE_AUDIO_OUT_ERROR_TRANS_EVENT	CE-30820-3	0x80260012	transfer event send error
SCE_AUDIO_OUT_ERROR_INVALID_FLAG	CE-30821-4	0x80260013	Invalid volume flag value
SCE_AUDIO_IN_ERROR_FATAL	CE-30822-5	0x80260100	undefined error
SCE_AUDIO_IN_ERROR_INVALID_HANDLE	CE-30823-6	0x80260101	Bad value of handle
SCE_AUDIO_IN_ERROR_INVALID_SIZE	CE-30824-7	0x80260102	Invalid sample length
SCE_AUDIO_IN_ERROR_INVALID_FREQ	CE-30825-8	0x80260103	Invalid sampling frequency
SCE_AUDIO_IN_ERROR_INVALID_TYPE	CE-30826-9	0x80260104	Invalid bus type
SCE_AUDIO_IN_ERROR_INVALID_POINTER	CE-30827-0	0x80260105	Invalid pointer value
SCE_AUDIO_IN_ERROR_INVALID_PARAM	CE-30828-1	0x80260106	Invalid port parameter
SCE_AUDIO_IN_ERROR_PORT_FULL	CE-30829-2	0x80260107	Cannot open port any more
SCE_AUDIO_IN_ERROR_OUT_OF_MEMORY	CE-30830-4	0x80260108	Not enough memory
SCE_AUDIO_IN_ERROR_NOT_OPENED	CE-30831-5	0x80260109	This port is not opened
SCE_AUDIO_IN_ERROR_BUSY	CE-30832-6	0x8026010A	Tried to input while inputting
SCE_AUDIO_IN_ERROR_SYSTEM_MEMORY	CE-30833-7	0x8026010B	Error due to relate of the system memory access
SCE_AUDIO_IN_ERROR_SYSTEM_IPC	CE-30834-8	0x8026010C	Error due to the system IPC
	CE-30835-9	0x80290000
SCE_VIDEO_OUT_ERROR_INVALID_VALUE	CE-30836-0	0x80290001	Invalid argument
SCE_VIDEO_OUT_ERROR_INVALID_ADDRESS	CE-30837-1	0x80290002	Invalid address
SCE_VIDEO_OUT_ERROR_INVALID_PIXEL_FORMAT	CE-30838-2	0x80290003	Invalid pixel format argument
SCE_VIDEO_OUT_ERROR_INVALID_PITCH	CE-30839-3	0x80290004	Invalid pitch argument
SCE_VIDEO_OUT_ERROR_INVALID_RESOLUTION	CE-30840-5	0x80290005	Invalid width, height argument
SCE_VIDEO_OUT_ERROR_INVALID_FLIP_MODE	CE-30841-6	0x80290006	Invalid flip mode argument
SCE_VIDEO_OUT_ERROR_INVALID_TILING_MODE	CE-30842-7	0x80290007	Invalid tiling mode argument
SCE_VIDEO_OUT_ERROR_INVALID_ASPECT_RATIO	CE-30843-8	0x80290008	Invalid aspect ratio argument
SCE_VIDEO_OUT_ERROR_RESOURCE_BUSY	CE-30844-9	0x80290009	The resource is in use.
SCE_VIDEO_OUT_ERROR_INVALID_INDEX	CE-30845-0	0x8029000A	Invalid index
SCE_VIDEO_OUT_ERROR_INVALID_HANDLE	CE-30846-1	0x8029000B	Invalid handle
SCE_VIDEO_OUT_ERROR_INVALID_EVENT_QUEUE	CE-30847-2	0x8029000C	Invalid event queue
SCE_VIDEO_OUT_ERROR_INVALID_EVENT	CE-30848-3	0x8029000D	Invalid event
SCE_VIDEO_OUT_ERROR_NO_EMPTY_SLOT	CE-30849-4	0x8029000F	No empty slot found.
SCE_VIDEO_OUT_ERROR_SLOT_OCCUPIED	CE-30850-6	0x80290010	The specified slot is already occupied.
SCE_VIDEO_OUT_ERROR_FLIP_QUEUE_FULL	CE-30851-7	0x80290012	flip queue is already full
SCE_VIDEO_OUT_ERROR_INVALID_MEMORY	CE-30852-8	0x80290013	Invalid memory
SCE_VIDEO_OUT_ERROR_MEMORY_NOT_PHYSICALLY_CONTIGUOUS	CE-30853-9	0x80290014	The buffer memory is not physically contiguous
SCE_VIDEO_OUT_ERROR_MEMORY_INVALID_ALIGNMENT	CE-30854-0	0x80290015	Invalid memory alignment for the buffer
SCE_VIDEO_OUT_ERROR_UNSUPPORTED_OUTPUT_MODE	CE-30855-1	0x80290016	Unsupported output mode
SCE_VIDEO_OUT_ERROR_UNKNOWN	CE-30856-2	0x802900FE	Unknown error
SCE_VIDEO_OUT_ERROR_FATAL	CE-30857-3	0x802900FF	Internal error
SCE_VIDEO_OUT_ERROR_ENOMEM	CE-30858-4	0x8029100C	Cannot allocate memory
SCE_AV_CONTROL_ERROR_INVALID_PARAM	CE-30859-5	0x802A0001	Error Invalid Param
SCE_AV_CONTROL_ERROR_INVALID_PITCH	CE-30860-7	0x802A0002	Error Invalid Pitch
SCE_AV_CONTROL_ERROR_INVALID_MODE	CE-30861-8	0x802A0003	Error Invalid Mode
SCE_AV_CONTROL_ERROR_PLL_FAIL	CE-30862-9	0x802A0004	Error Pll Fail
SCE_AV_CONTROL_ERROR_DP_LINK_TRAINING_FAIL	CE-30863-0	0x802A0005	Error Dp Link Training Fail
SCE_AV_CONTROL_ERROR_BLANK_TIMEOUT	CE-30864-1	0x802A0006	Error Blink Timeout
SCE_AV_CONTROL_ERROR_INIT_FAIL	CE-30865-2	0x802A0007	Error Init Fail
SCE_CAMERA_ERROR_PARAM	CE-30866-3	0x802E0000	Parameter is invalid
SCE_CAMERA_ERROR_ALREADY_INIT	CE-30867-4	0x802E0001	Already initialized
SCE_CAMERA_ERROR_NOT_INIT	CE-30868-5	0x802E0002	Not initialized
SCE_CAMERA_ERROR_ALREADY_OPEN	CE-30869-6	0x802E0003	Camera is already open.
SCE_CAMERA_ERROR_NOT_OPEN	CE-30870-8	0x802E0004	Camera is not open.
SCE_CAMERA_ERROR_ALREADY_START	CE-30871-9	0x802E0005	Streaming has started.
SCE_CAMERA_ERROR_NOT_START	CE-30872-0	0x802E0006	Streaming has not yet started.
SCE_CAMERA_ERROR_FORMAT_UNKNOWN	CE-30873-1	0x802E0007	Cannot start with specified format.
SCE_CAMERA_ERROR_RESOLUTION_UNKNOWN	CE-30874-2	0x802E0008	Cannot start with specified resolution.
SCE_CAMERA_ERROR_BAD_FRAMERATE	CE-30875-3	0x802E0009	Cannot open with specified frame rate.
SCE_CAMERA_ERROR_TIMEOUT	CE-30876-4	0x802E000A	Function timed out
SCE_CAMERA_ERROR_ATTRIBUTE_UNKNOWN	CE-30877-5	0x802E000B	Unknown attribute
SCE_CAMERA_ERROR_BUSY	CE-30878-6	0x802E000C	The camera is busy.
SCE_CAMERA_ERROR_UNKNOWN_CONFIG	CE-30879-7	0x802E000D	Unknown Configuration
SCE_CAMERA_ERROR_ALREADY_READ	CE-30880-9	0x802E000F	The frame has already been read.
SCE_CAMERA_ERROR_NOT_CONNECTED	CE-30881-0	0x802E0010	The Camera is not connected.
SCE_CAMERA_ERROR_NOT_SUPPORTED	CE-30882-1	0x802E0011	The Function is not supported.
SCE_CAMERA_ERROR_INVALID_CONFIG	CE-30883-2	0x802E0013	Attribute cannot specify under this Configuration.
SCE_CAMERA_ERROR_MAX_HANDLE	CE-30884-3	0x802E0014	Number of processes reached maximum.
SCE_CAMERA_ERROR_MAX_PROCESS	CE-30885-4	0x802E00FB	Number of processes reached maximum.
SCE_CAMERA_ERROR_COPYOUT_FAILED	CE-30886-5	0x802E00FC	Copy out failed.
SCE_CAMERA_ERROR_COPYIN_FAILED	CE-30887-6	0x802E00FD	Copying failed.
SCE_CAMERA_ERROR_KPROC_CREATE	CE-30888-7	0x802E00FE	Process create failed.
SCE_CAMERA_ERROR_FATAL	CE-30889-8	0x802E00FF	Fatal error occurred.
SCE_BT_ERROR_REG_NOT_READY	CE-30890-0	0x802F0101	Error Reg Not Ready
SCE_BT_ERROR_REG_DELETE_NO_ENTRY	CE-30891-1	0x802F0102	Error Reg Delete No Entry
SCE_BT_ERROR_REG_UPDATE_CANNOT_SAVE	CE-30892-2	0x802F0103	Error Reg Update Cannot Save
SCE_BT_ERROR_REG_SET_HID_DESC_BAD_ARG	CE-30893-3	0x802F0105	Error Reg Set Hid Desc Bad Arg
SCE_BT_ERROR_REG_SET_HID_DESC_NO_REG	CE-30894-4	0x802F0106	Error Reg Set Hid Desc No Arg
SCE_BT_ERROR_CONNECT_START_BUSY	CE-30905-7	0x802F0204	Connection process with Bluetooth device cannot be started (another device being registered) // Step 1: Reboot the console. Step 2: If the system software is not up to date, update it to the latest version. Step 3: If there are any other Bluetooth devices near the console, turn them off and try again.
SCE_BT_ERROR_CONF_BT_INACTIVE	CE-30993-4	0x802F1503	Error occurred during Bluetooth connection // Step 1: Check if the device can be used with PS4 consoles. Step 2: Try connecting another compatible Bluetooth device. Step 3: Reboot the console. Step 4: If possible, try resetting the device.
SCE_HID_ERROR_ALREADY_LOGGED_OUT	CE-31138-6	0x803B0101	This user already logged out
SCE_FONT_ERROR_FATAL	CE-31493-0	0x80460001	Fatal error
SCE_FONT_ERROR_ALLOCATION_FAILED	CE-31494-1	0x80460010	Invalid argument value detected
SCE_FONT_ERROR_INVALID_MEMORY	CE-31495-2	0x80460003	Invalid FontMemory detected
SCE_FONT_ERROR_INVALID_LIBRARY	CE-31496-3	0x80460004	Invalid FontLibrary detected
SCE_FONT_ERROR_INVALID_FONT_HANDLE	CE-31497-4	0x80460005	Invalid FontHandle detected
SCE_FONT_ERROR_INVALID_GLYPH	CE-31498-5	0x80460006	Invalid FontGlyph detected
SCE_FONT_ERROR_INVALID_RENDERER	CE-31499-6	0x80460007	Invalid FontRenderer detected
SCE_FONT_ERROR_ALLOCATION_FAILED	CE-31500-9	0x80460010	Memory allocation failed
SCE_FONT_ERROR_FS_OPEN_FAILED	CE-31501-0	0x80460011	File open failed
SCE_FONT_ERROR_NO_SUPPORT_LIBRARY	CE-31502-1	0x80460018	Unsupported library
SCE_FONT_ERROR_NO_SUPPORT_FORMAT	CE-31503-2	0x80460019	Unsupported format
SCE_FONT_ERROR_NO_SUPPORT_FUNCTION	CE-31504-3	0x80460020	Unsupported function
SCE_FONT_ERROR_ALREADY_SPECIFIED	CE-31505-4	0x80460021	Already specified
SCE_FONT_ERROR_ALREADY_ATTACHED	CE-31506-5	0x80460022	Already attached
SCE_FONT_ERROR_ALREADY_OPENED	CE-31507-6	0x80460023	Already opened font detected
SCE_FONT_ERROR_NOT_ATTACHED_CACHE_BUFFER	CE-31508-7	0x80460025	No cache buffer
SCE_FONT_ERROR_NO_SUPPORT_FONTSET	CE-31509-8	0x80460031	Unsupported font set
SCE_FONT_ERROR_FONT_OPEN_MAX	CE-31510-0	0x80460033	Exceeding maximum number of font opens
SCE_FONT_ERROR_FONT_OPEN_FAILED	CE-31511-1	0x80460036	Failed in font opening process
SCE_FONT_ERROR_FONT_CLOSE_FAILED	CE-31512-2	0x80460037	Failed in font closing process
SCE_FONT_ERROR_NO_SUPPORT_CODE	CE-31513-3	0x80460041	Unsupported code
SCE_FONT_ERROR_NO_SUPPORT_GLYPH	CE-31514-4	0x80460042	Glyph could not be found
SCE_FONT_ERROR_NO_SUPPORT_SURFACE	CE-31515-5	0x80460050	Unsupported surface
SCE_FONT_ERROR_UNSET_PARAMETER	CE-31516-6	0x80460058	Unset parameter
SCE_FONT_ERROR_ALREADY_BOUND_RENDERER	CE-31517-7	0x80460060	Renderer is already bound
SCE_FONT_ERROR_NOT_BOUND_RENDERER	CE-31518-8	0x80460061	Renderer is not bound
SCE_FONT_ERROR_RENDERER_ALLOCATION_FAILED	CE-31519-9	0x80460063	Renderer could not allocate memory
SCE_FONT_ERROR_RENDERER_RENDER_FAILED	CE-31520-1	0x80460065	Render failed to render
SCE_MD5_ERROR_INVALID_POINTER	CE-31521-2	0x80480100	invalid pointer argument
SCE_MD5_ERROR_INVALID_STATE	CE-31522-3	0x80480101	invalid state
SCE_MD5_ERROR_UNINITIALIZED_CONTEXT	CE-31523-4	0x80480102	uninitialized context
SCE_SHA0_ERROR_INVALID_POINTER	CE-31524-5	0x80480200	invalid pointer argument
SCE_SHA0_ERROR_INVALID_STATE	CE-31525-6	0x80480201	invalid state
SCE_SHA0_ERROR_UNINITIALIZED_CONTEXT	CE-31526-7	0x80480202	uninitialized context
SCE_SHA1_ERROR_INVALID_POINTER	CE-31527-8	0x80480300	invalid pointer argument
SCE_SHA1_ERROR_INVALID_STATE	CE-31528-9	0x80480301	invalid state
SCE_SHA1_ERROR_UNINITIALIZED_CONTEXT	CE-31529-0	0x80480302	uninitialized context
SCE_SHA224_ERROR_INVALID_POINTER	CE-31530-2	0x80480400	invalid pointer argument
SCE_SHA224_ERROR_INVALID_STATE	CE-31531-3	0x80480401	invalid state
SCE_SHA224_ERROR_UNINITIALIZED_CONTEXT	CE-31532-4	0x80480402	uninitialized context
SCE_SHA256_ERROR_INVALID_POINTER	CE-31533-5	0x80480500	invalid pointer argument
SCE_SHA256_ERROR_INVALID_STATE	CE-31534-6	0x80480501	invalid state
SCE_SHA256_ERROR_UNINITIALIZED_CONTEXT	CE-31535-7	0x80480502	uninitialized context
SCE_SHA384_ERROR_INVALID_POINTER	CE-31536-8	0x80480600	invalid pointer argument
SCE_SHA384_ERROR_INVALID_STATE	CE-31537-9	0x80480601	invalid state
SCE_SHA384_ERROR_UNINITIALIZED_CONTEXT	CE-31538-0	0x80480602	uninitialized context
SCE_SHA512_ERROR_INVALID_POINTER	CE-31539-1	0x80480700	invalid pointer argument
SCE_SHA512_ERROR_INVALID_STATE	CE-31540-3	0x80480701	invalid state
SCE_SHA512_ERROR_UNINITIALIZED_CONTEXT	CE-31541-4	0x80480702	uninitialized context
SCE_SHA512T_ERROR_INVALID_POINTER	CE-31542-5	0x80480800	invalid pointer argument
SCE_SHA512T_ERROR_INVALID_STATE	CE-31543-6	0x80480801	invalid state
SCE_SHA512T_ERROR_INVALID_DIGEST_SIZE	CE-31544-7	0x80480802	invalid digest size
SCE_SHA512T_ERROR_UNINITIALIZED_CONTEXT	CE-31545-8	0x80480803	uninitialized context
SCE_HMAC_ERROR_INVALID_POINTER	CE-31546-9	0x80481000	invalid pointer argument
SCE_HMAC_ERROR_INVALID_DIGEST_SIZE	CE-31547-0	0x80481002	invalid digest size
SCE_MT19937_ERROR_INVALID_POINTER	CE-31548-1	0x80490100	invalid pointer argument
SCE_SFMT607_ERROR_INVALID_POINTER	CE-31549-2	0x80490200	invalid pointer argument
SCE_SFMT607_ERROR_INVALID_STATE	CE-31550-4	0x80490201	invalid state
SCE_SFMT607_ERROR_INVALID_SIZE	CE-31551-5	0x80490202	invalid size
SCE_SFMT1279_ERROR_INVALID_POINTER	CE-31552-6	0x80490300	invalid pointer argument
SCE_SFMT1279_ERROR_INVALID_STATE	CE-31553-7	0x80490301	invalid state
SCE_SFMT1279_ERROR_INVALID_SIZE	CE-31554-8	0x80490302	invalid size
SCE_SFMT2281_ERROR_INVALID_POINTER	CE-31555-9	0x80490400	invalid pointer argument
SCE_SFMT2281_ERROR_INVALID_STATE	CE-31556-0	0x80490401	invalid state
SCE_SFMT2281_ERROR_INVALID_SIZE	CE-31557-1	0x80490402	invalid size
SCE_SFMT4253_ERROR_INVALID_POINTER	CE-31558-2	0x80490500	invalid pointer argument
SCE_SFMT4253_ERROR_INVALID_STATE	CE-31559-3	0x80490501	invalid state
SCE_SFMT4253_ERROR_INVALID_SIZE	CE-31560-5	0x80490502	invalid size
SCE_SFMT11213_ERROR_INVALID_POINTER	CE-31561-6	0x80490600	invalid pointer argument
SCE_SFMT11213_ERROR_INVALID_STATE	CE-31562-7	0x80490601	invalid state
SCE_SFMT11213_ERROR_INVALID_SIZE	CE-31563-8	0x80490602	invalid size
SCE_SFMT19937_ERROR_INVALID_POINTER	CE-31564-9	0x80490700	invalid pointer argument
SCE_SFMT19937_ERROR_INVALID_STATE	CE-31565-0	0x80490701	invalid state
SCE_SFMT19937_ERROR_INVALID_SIZE	CE-31566-1	0x80490702	invalid size
SCE_SFMT44497_ERROR_INVALID_POINTER	CE-31567-2	0x80490800	invalid pointer argument
SCE_SFMT44497_ERROR_INVALID_STATE	CE-31568-3	0x80490801	invalid state
SCE_SFMT44497_ERROR_INVALID_SIZE	CE-31569-4	0x80490802	invalid size
SCE_SFMT86243_ERROR_INVALID_POINTER	CE-31570-6	0x80490900	invalid pointer argument
SCE_SFMT86243_ERROR_INVALID_STATE	CE-31571-7	0x80490901	invalid state
SCE_SFMT86243_ERROR_INVALID_SIZE	CE-31572-8	0x80490902	invalid size
SCE_SFMT132049_ERROR_INVALID_POINTER	CE-31573-9	0x80490A00	invalid pointer argument
SCE_SFMT132049_ERROR_INVALID_STATE	CE-31574-0	0x80490A01	invalid state
SCE_SFMT132049_ERROR_INVALID_SIZE	CE-31575-1	0x80490A02	invalid size
SCE_SFMT216091_ERROR_INVALID_POINTER	CE-31576-2	0x80490B00	invalid pointer argument
SCE_SFMT216091_ERROR_INVALID_STATE	CE-31577-3	0x80490B01	invalid state
SCE_SFMT216091_ERROR_INVALID_SIZE	CE-31578-4	0x80490B02	invalid size
SCE_NGS2_ERROR_FAIL	CE-31579-5	0x804A0001	fatal error
SCE_NGS2_ERROR_INVALID_MAX_GRAIN_SAMPLES	CE-31580-7	0x804A0050	specified max grain samples is invalid
	CE-31581-8		specified grain samples is invalid
	CE-31582-9		the specified number of channel is invalid
	CE-31583-0		specified out address is invalid
	CE-31584-1		specified out size is invalid
	CE-31585-2		specified option address is invalid
	CE-31586-3		specified option size is invalid
	CE-31587-4		specified system option flag is invalid
	CE-31588-5		specified max matrices is invalid
	CE-31589-6		specified max ports is invalid
	CE-31590-8		specified max input delay blocks is invalid
	CE-31591-9		specified max voices is invalid
	CE-31592-0		specified max channels is invalid
	CE-31593-1		specified max channels is invalid
	CE-31594-2		specified max waveform blocks is invalid
	CE-31595-3		specified max envelope points is invalid
	CE-31596-4		specified max filters is invalid
	CE-31597-5		specified max codec caches is invalid
	CE-31598-6		specified max atrac9 decoders is invalid
	CE-31599-7		specified max atrac9 channel works is invalid
	CE-31600-0		specified max inputs is invalid
	CE-31601-1		the specified number of matrix level is invalid
	CE-31602-2		the specified number of waveform block is invalid
	CE-31603-3		the specified number of envelope points is invalid
	CE-31604-4		the specified matrix level address is invalid
	CE-31605-5		the specified waveform block address is invalid
	CE-31606-6		the specified envelope point address is invalid
	CE-31607-7		the specified number of peak meter block is invalid
	CE-31608-8		specified handle is invalid
	CE-31609-9		specified sample rate is invalid
	CE-31610-1		specified report type is invalid
	CE-31611-2		specified report handler is invalid
	CE-31612-3		specified report handle is invalid
	CE-31613-4		report handle can not be registered
	CE-31614-5		specified buffer info is invalid
	CE-31615-6		specified buffer address is invalid
	CE-31616-7		specified buffer alignment is invalid
	CE-31617-8		specified buffer size is invalid
	CE-31618-9		specified buffer allocator is invalid
	CE-31619-0		system buffer is broken
	CE-31620-2		buffer is lack
	CE-31621-3		specified system handle is invalid
	CE-31622-4		specified Rack ID is invalid
	CE-31623-5		specified Rack handle is invalid
	CE-31624-6		specified voice handle is invalid
	CE-31625-7		specified voice is uninitialized
	CE-31626-8		specified voice index is invalid
	CE-31627-9		specified voice event is invalid
	CE-31628-0		specified port index is invalid
	CE-31629-1		specified patch parameter is invalid
	CE-31630-3		channel work is lack
	CE-31631-4		voice resource is lack
	CE-31632-5		specified voice control ID is invalid
	CE-31633-6		specified voice control address is invalid
	CE-31634-7		specified voice control size is invalid
	CE-31635-8		detected circular voice control
	CE-31636-9		voice resource is lack
	CE-31637-0		the specified data format of wave form is invalid
	CE-31638-1		the specified type of wave form is invalid
	CE-31639-2		the specified config data of wave form is invalid
	CE-31640-4		the specified sample rate of wave form is invalid
	CE-31641-5		the specified frame offset or frame mergin is invalid
	CE-31642-6		the specified address of wave form is invalid
	CE-31643-7		the specified size of wave form is invalid
	CE-31644-8		the specified wave form data is invalid
	CE-31645-9		the specified curve of envelope is invalid
	CE-31646-0		the specified flag of peak meter is invalid
	CE-31647-1		the specified max chorus phases is invalid
	CE-31648-2		the specified number of chorus phases is invalid
	CE-31649-3		the specified curve of envelope is invalid
	CE-31650-5		the specified type of filter is invalid
	CE-31651-6		the specified location of filter is invalid
	CE-31652-7		the specified cutoff frequency of filter is invalid
	CE-31653-8		the specified parameter size of user fx is invalid
	CE-31654-9		the specified index of matrix is invalid
	CE-31655-0		the codec of specified wavefrom is invalid
	CE-31656-1		the codec instance is not empty
	CE-31657-2		the channel work of codec is not empty
	CE-31658-3		failed to setup decoder
	CE-31659-4		failed to reset decoder
	CE-31660-6		failed to decode
	CE-31661-7		the specified reverb size is invalid
	CE-31662-8		the specified unit angle is invalid
	CE-31663-9		the specified speaker angle is invalid
	CE-31664-0		the specified pan matrix format is invalid
	CE-31665-1		the specified pan work is invalid
	CE-31666-2		the specified pan param is invalid
	CE-31667-3		the specified module ID is invalid
	CE-31668-4		the specified number of module is invalid
	CE-31669-5		the specified number of module buffer is invalid
	CE-31670-7		the specified module buffer ID is invalid
	CE-31671-8		the specified module state offset is invalid
	CE-31672-9		the specified module state size is invalid
	CE-31673-0		the specified voice state size is invalid
	CE-31674-1		the specified module index is invalid
	CE-31675-2		the specified module info size is invalid
	CE-31695-4		The system has already initialized
	CE-31696-5		The system has not been initialized
	CE-31697-6		An argument is invalid
	CE-31698-7		The alignment of a parameter is invalid
	CE-31699-8		The system ran out of memory
	CE-31700-1		The feature is unsupported
	CE-31701-2		A network error occurred
	CE-31702-3		The network is not owned by this system
	CE-31703-4		An agent has the incorrect definition
	CE-31704-5		The server is not connected
	CE-31705-6		A capture is already in progress
	CE-31706-7		The server has run out of bookmarks to allocate
	CE-31707-8		The server connection has timed out
	CE-31708-9		The voice library has not been initialized.
	CE-31709-0		The voice library has already been initialized.
	CE-31710-2		Errors that belong to non-voice APIs.
	CE-31711-3		Invalid port.
	CE-31712-4		Invalid argument.
	CE-31713-5		Invalid memory block.
	CE-31714-6		Topology error.
	CE-31715-7		Insufficient resources.
	CE-31716-8		Library internal voice service is detached.
	CE-31717-9		Library internal voice service is attached.
	CE-31718-0		The VoiceQoS library has not been initialized.
	CE-31719-1		An invalid argument was given to a VoiceQoS library
	CE-31720-3		An invalid packet was given to a VoiceQoS library
	CE-31721-4		An unrecoverable internal error occurred in the VoiceQoS library.
	CE-31722-5		The VoiceQoS library has already been initialized.
	CE-31723-6		A system error occurred in the VoiceQoS library.
	CE-31724-7		A resource limit error occurred in the VoiceQoS library.
	CE-32539-2		Failed to read the data // If the error occurs when backing up and restoring data, check that the USB drive is properly connected to the console and try again. If the error occurs when reading the save data, copy the data to PS Plus online storage or to a USB drive and then download it to the console. If the problem still persists, delete the relevant application and install it again. Try creating new save data.
	CE-32566-2		The specified pointer is NULL.
	CE-32567-3		There is an alignment error in the specified pointer.
	CE-32568-4		The specified value is not within the accepted range.
	CE-32569-5		The specified parameter is invalid.
	CE-32570-7		The caller is attempting to perform an unauthorized operation.
	CE-32571-8		The fiber state does not allow that operation.
	CE-32572-9		Tried to load an unknown PRX
	CE-32573-0		Tried to unload a PRX that is already unloaded or the module is not loaded
	CE-32574-1		Function call failed
	CE-32575-2		Specified argument value is invalid
	CE-32576-3		Specified profile is invalid
	CE-32577-4		Specified source buffer is invalid
	CE-32578-5		Specified source buffer is insufficient
	CE-32579-6		Source encoding determined to be invalid
	CE-32580-8		Illegal character code detected in source character code
	CE-32581-9		Code points in output destination encoding scheme are not defined
	CE-32582-0		Character outside the representable code range of the output destination encoding scheme is detected
	CE-32583-1		Output destination buffer is invalid
	CE-32584-2		Output destination buffer is insufficient
	CE-32585-3		Specified memory address is invalid
	CE-32586-4		Specified memory size is invalid
	CE-32587-5		Specified parameter is invalid
	CE-32588-6		Specified handle is invalid
	CE-32589-7		Specified coefficient memory is invalid
	CE-32590-9		Work memory in the decoder is invalid
	CE-32591-0		Invalid JPEG image (non-standard)
	CE-32592-1		JPEG image is not supported by the decoder
	CE-32593-2		Decoding error
	CE-32594-3		Internal error
	CE-32595-4		Specified memory address is invalid
	CE-32596-5		Specified memory size is invalid
	CE-32597-6		Specified parameter is invalid
	CE-32598-7		Specified handle is invalid
	CE-32599-8		Encoding was aborted due to an overflow upon outputting the JPEG image
	CE-32600-1		Internal error
	CE-32601-2		Specified memory address is invalid
	CE-32602-3		Specified memory size is invalid
	CE-32603-4		Specified parameter is invalid
	CE-32604-5		Specified handle is invalid
	CE-32605-6		Work memory in the decoder is invalid
	CE-32606-7		Invalid PNG image (non-standard)
	CE-32607-8		PNG image is not supported by the decoder
	CE-32608-9		Decoding error
	CE-32609-0		Internal error
	CE-32610-2		Specified memory address is invalid
	CE-32611-3		Specified memory size is invalid
	CE-32612-4		Specified parameter is invalid
	CE-32613-5		Specified handle is invalid
	CE-32614-6		Encoding was aborted due to an overflow upon outputting the PNG image
	CE-32615-7		Internal error
	CE-32616-8		invalid parameter specified
	CE-32617-9		the requested operation has failed
	CE-32618-0		memory allocation has failed
	CE-32619-1		requested operation is not supported
	CE-32620-3		event notification that the file is non-interleaved
	CE-32621-4		event notification that the stream is looping back
	CE-32622-5		event notification of stream encrypted using Marlin
	CE-32623-6		event notification of stream encrypted using PlayReady
	CE-32624-7		event notification of stream encrypted using AES
	CE-32625-8		event notification of stream encrypted using other encryption technology
	CE-32665-2		internal error
	CE-32666-3		Specified codec type is invalid
	CE-32667-4		Specified argument is invalid
	CE-32668-5		size of structure is invalid
	CE-32669-6		size of AudiodecParam* structure is invalid
	CE-32670-8		size of Audiodec*Info structure is invalid
	CE-32671-9		size of AudiodecAuInfo structure is invalid
	CE-32672-0		size of AudiodecPcmItem structure is invalid
	CE-32673-1		Specified invalid pointer of AudiodecCtrl
	CE-32674-2		Specified invalid pointer of pParam
	CE-32675-3		Specified invalid pointer of pBsiInfo
	CE-32676-4		Specified invalid pointer of pAuInfo
	CE-32677-5		Specified invalid pointer of pPcmItem
	CE-32678-6		Specified invalid pAuAddr
	CE-32679-7		Specified invalid pPcmAddr
	CE-32680-9		Specified invalid handle
	CE-32681-0		Specified invalid word length
	CE-32682-1		Specified invalid uiAuSize
	CE-32683-2		Specified invalid uiPcmSize
	CE-32684-3		Specified invalid raw data output sampling frequency of MPEG4-AAC
	CE-32685-4		Specified invalid HE-AAC decoding flag of MPEG4-AAC
	CE-32686-5		Specified invalid header type of MPEG4-AAC
	CE-32687-6		Specified invalid maximum number of channels of MPEG4-AAC
	CE-32688-7		Specified invalid karaoke capable reproduction mode of Dolby Digital
	CE-32689-8		Specified invalid dynamic range compression mode of Dolby Digital
	CE-32690-0		Specified invalid LFE channel output mode of Dolby Digital
	CE-32691-1		Specified invalid output channel configuration of Dolby Digital
	CE-32692-2		Specified invalid number of output channels of Dolby Digital
	CE-32693-3		Specified invalid output PCM samples scale factor of Dolby Digital
	CE-32694-4		Specified invalid stereo mode of Dolby Digital
	CE-32695-5		Specified invalid dual mono reproduction mode of Dolby Digital
	CE-32696-6		Specified invalid high frequency dynamic cut scale factor of Dolby Digital
	CE-32697-7		Specified invalid low frequency dynamic boost scale factor of Dolby Digital
	CE-32698-8		Specified invalid output channel routing of Dolby Digital
	CE-32699-9		Specified invalid downmix flag of MPEG2-BC
	CE-32700-2		Specified invalid ConfigData of ATRAC9
	CE-32701-3		Specified invalid presentationMode of Dolby TrueHD
	CE-32702-4		Specified invalid lossless of Dolby TrueHD
	CE-32703-5		Specified invalid drcEnable of Dolby TrueHD
	CE-32704-6		Specified invalid drcCut of Dolby TrueHD
	CE-32705-7		Specified invalid drcBoost of Dolby TrueHD
	CE-32706-8		Specified invalid nFrameDecode of Dolby TrueHD
	CE-32707-9		The specified pointer is NULL.
	CE-32708-0		The alignment restrictions are not met.
	CE-32709-1		The specified value is out of range.
	CE-32710-3		The specified argument value is invalid.
	CE-32711-4		This is an unauthorized operation.
	CE-32712-5		The current state does not allow application of this operation.
	CE-32713-6		The resource cannot be used.
	CE-32714-7		Execution of this operation is temporarily not possible.
	CE-32715-8		A fatal error occurred.
	CE-32716-9		This library is not initialized.
	CE-32717-0		Not implemented
	CE-32718-1		Out of memory in opStorage
	CE-32719-2		Out of memory in fhStorage
	CE-32720-4		Out of memory in dhStorage
	CE-32721-5		Out of memory in chunkStorage
	CE-32722-6		File not found
	CE-32723-7		An invalid pointer was given as an argument
	CE-32724-8		An invalid offset was given as an argument
	CE-32725-9		An invalid size was given as an argument
	CE-32726-0		An invalid iovcnt was given as an argument
	CE-32727-1		An invalid FiosOp was given as an argument
	CE-32728-2		An invalid FiosFH was given as an argument
	CE-32729-3		An invalid FiosDH was given as an argument
	CE-32730-5		Invalid alignment on a pointer argument
	CE-32731-6		Attempted a file operation but target was a directory
	CE-32732-7		Attempted a directory operation but target was a file
	CE-32733-8		End-of-file reached
	CE-32734-9		Timeout occurred
	CE-32735-0		Operation was cancelled
	CE-32736-1		Insufficient access privileges
	CE-32737-2		Decompression failed
	CE-32738-3		Attempted to write to read-only filehandle or media
	CE-32739-4		Attempted to read from write-only filehandle
	CE-32740-6		Media has been removed unplugged or otherwise detached
	CE-32741-7		Path does not fit in buffer
	CE-32742-8		Too many overlays
	CE-32743-9		An invalid overlay was given as an argument
	CE-32744-0		An invalid order was given as an argument
	CE-32745-1		An invalid index was given. Either out of range or already in use
	CE-32746-2		Callback did not handle the event
	CE-32747-3		A FiosDHRead is already pending on this FiosDH
	CE-32748-4		Badly-formed or unsupported PSARC archive
	CE-32749-5		An invalid Resolve Type was given when resolving overlays
	CE-32750-7		Invalid flags were given as an argument
	CE-32751-8		An unknown platform-specific error occurred
	CE-32752-9		The file or directory already exists
	CE-32753-0		Invalid Character
	CE-32754-1		No Memory
	CE-32755-2		File Not Found
	CE-32756-3		Set Value No Root
	CE-32757-4		Not Initialize
	CE-32758-5		Multiple Init
	CE-32759-6		Generic error
	CE-32760-8		Failed to assign memory
	CE-32761-9		Not initialized yet
	CE-32762-0		Invalid argument
	CE-32763-1		Not Supported
	CE-32764-2		Initialize Failed
	CE-32765-3		Invalid Binary Data
	CE-32766-4		Busy Parser
	CE-32767-5		Unexpected EOF
	CE-32768-6		Syntax Eroor XML
	CE-32769-7		Mismatch End Tag
	CE-32770-9		Invalid Charactor
	CE-32771-0		Invalid DEC Value
	CE-32772-1		Invalid HEX Value
	CE-32773-2		Closing Angle Bracket Char Not Found
	CE-32774-3		Equality Char Not Found
	CE-32775-4		Semicolon Char Not Found
	CE-32776-5		Quote Char Not Found
	CE-32777-6		Comment Not Found
	CE-32778-7		End Of CDATA Not Found
	CE-32779-8		End Of DTD Not Found
	CE-32780-0		Unknown Encoding
	CE-32781-1		Not Set Handler
	CE-32782-2		Invalid PI
	CE-32783-3		Invalid Document Element
	CE-32784-4		Document Element Not Found
	CE-32785-5		Duplicate Attr Name
	CE-32786-6		DOM Error
	CE-32787-7		DOM Node Not Found
	CE-32788-8		DOM Read Only
	CE-32789-9		DOM Max Unique Element
	CE-32790-1		DOM Max Unique Attribute
	CE-32791-2		DOM Max Num of Attribute
	CE-32792-3		DOM Max Size of Element Name
	CE-32793-4		DOM Max Size of Attribute Name
	CE-32794-5		DOM Max Size of Attribute Value
	CE-32795-6		DOM Invalid Entity
	CE-32796-7		DOM Invalid Node Type
	CE-32807-0		License error // Step 1: If you have previously activated the system as your Primary PS4, go to [Settings] > [PSN] > [Activate as Your Primary PS4], deactivate, and then reactivate. Step 2: Go to [Settings] > [PSN] > [Restore Licenses],and choose the restore option. Step 3: If the error occurs again, try again later. You can also check the status of the PSN here.
	CE-32809-2		Error occurred while launching the game (content not recognized and failed to launch) // Step 1: Launch the game on the account that was used to purchase it. Step 2: Activate console at [Settings] > [Account Management] > [Activate as Your Primary PS4]. If the console is already activated, de-activate it and activate it again. Step 3: If the error occurs on one specific game, delete it and reinstall it again.
	CE-32811-5		Could not the application. Application data on HDD may be partially corrupted.
	CE-32812-6		Not enough memory to run
	CE-32813-7		Parameter is invalid
	CE-32814-8		Dictionary data is invalid
	CE-32815-9		Parts are incomplete
	CE-32816-0		Face angle is out of range
	CE-32817-1		Face shape is imperfect
	CE-32818-2		Error code indicating that Smart is not initialized yet.
	CE-32819-3		Error code indicating that Smart failed to allocate memory.
	CE-32820-5		Error code indicating that Smart is already initialized.
	CE-32821-6		Error code indicating that Smart is not stoped yet.
	CE-32822-7		Error code indicating that some of the resources are not yet
	CE-32823-8		Error code indicating that the given value is invalid.
	CE-32824-9		Error code indicating that the given pointer is invalid.
	CE-32825-0		Error code indicating that the input is already registered.
	CE-32826-1		Error code indicating that the input is not yet registered.
	CE-32827-2		Error code indicating that Smart is already started.
	CE-32828-3		Error code indicating that Smart is not started yet.
	CE-32829-4		Error code indicating that Smart is not ready for the request.
	CE-32830-6		Error code indicating that the given value/file is not
	CE-32831-7		Error code indicating that no target has been registered yet.
	CE-32832-8		Error code indicating that Smart is locked by other threads.
	CE-32833-9		Error code indicating that no target pack has been registered yet.
	CE-32834-0		Error code indicating that maximum number of registered target pack has been exceeded.
	CE-32835-1		Specified memory address is invalid
	CE-32836-2		Specified memory size is invalid
	CE-32837-3		invalid argument
	CE-32838-4		invalid port
	CE-32839-5		invalid handle
	CE-32840-7		already opened the port.
	CE-32841-8		library uninitialized.
	CE-32842-9		invalid light bar setting.
	CE-32843-0		device is not connected of the handle.
	CE-32844-1		fatal error
	CE-32845-2		Unknown error. This value should not be used.
	CE-32846-3		The specified AJM context does not exist.
	CE-32847-4		The specified AJM instance does not exist.
	CE-32848-5		The specified AJM batch does not exist.
	CE-32849-6		An invalid parameter was passed.
	CE-32850-8		Not enough memory to perform the operation.
	CE-32851-9		Not enough resources to perform the operation.
	CE-32852-0		The specified codec is not supported.
	CE-32853-1		The specified codec is already registered in the context
	CE-32854-2		The specified codec is not registered in the context.
	CE-32855-3		The revision passed in the flags is not supported.
	CE-32856-4		One of the flags is not supported by the codec.
	CE-32857-5		The entity (instance codec...) is currently in use.
	CE-32858-6		The specified priority is invalid.
	CE-32859-7		The specified batch has not completed yet.
	CE-32860-9		The operation cannot be performed at the moment.
	CE-32861-0		The specified batch contains error.
	CE-32862-1		One or more jobs failed to be added to the batch.
	CE-32863-2		The batch contains an invalid opcode.
	CE-32864-3		The batch references an instance that is already being processed in a batch of a different priority.
	CE-32865-4		The batch references a buffer that exceeds the allowed size.
	CE-32866-5		The batch references a buffer that is not accessible within this process.
	CE-32867-6
	CE-32868-7
	CE-32869-8		Could not start the application as the information was invalid. The database may be partially corrupted // Boot the console into Safe Mode and select [5. Rebuild Database]. Try launching the app again. If the error persists, reboot back into Safe Mode and select [3. Update System Software] or [4. Rebuild Database]. If the error is only occurring with a specific application, delete and reinstall it. If the error occurs with multiple or all applications, back up all saved data and initialize the console.
SCE_LNC_UTIL_ERROR_DEVKIT_EXPIRED = -2137784309	CE-32875-5	0x8094000B	Cannot start the application // Occurs on a retail ps4 with a non married bd logic board. Apps restricted from loading however dvd playback is functional.
	CE-32883-4		Internal error (internet connection issue) // Step 1: Turn off the console and then back on. Step 2: Perform an Internet connection test. Step 3: Turn off your router for at least 5 minutes, then turn it back on. Step 4: This may be a temporary issue, try again later.
	CE-32884-5		Library not initialized
	CE-32885-6		Library has already been initialized
	CE-32886-7		Specified data is broken
	CE-32887-8		Could not find specified element
	CE-32888-9		The format of the specified parameter was not appropriate
	CE-32889-0		Error occurred in game or application (game/application having an issue connecting to PSN) // Perform a connection test. If the test fails to sign into PSN then try again later as the server may be experiencing high volume.
	CE-32890-2		Specified parameter was not appropriate
	CE-32891-3		The size is out of predefined range
	CE-32892-4		Unknown error
	CE-32893-5		Invalid certificate is specified
SCE_SSL_ERROR_CN_CHECK	CE-32894-6	0x8095F00B	Connection to server has been lost. There might have been a problem in connecting to the network, or PSN or the server of the service provider might be temporarily busy // Step 1: Perform a connection test. Step 2: Try the following: Other devices on the network might be using a large amount of bandwidth. Wait until they finish. Make sure the router and modem supports the PS4. Contact your ISP for details. Reset internet connection by turning off modem/router for 5 minutes before turning it back on. Update router firmware. If using a Wi-Fi connection, move the PS4 and router closer together and remove any obstructions between them. Step 3: Make sure these port numbers are not blocked by the router: TCP: 80, 443, 3478, 3479, 3480; UDP: 3478, 3479. Step 4: If using a specific DNS server, change DNS settings. Step 5: If still experiencing difficulties, try again later as the server may be experiencing high traffic.
	CE-32895-7		Does not have certificate of RootCA that issued server certificate // An error has occurred.
	CE-32896-8		Certificate validity period expired
	CE-32897-9		Before certificate validity period
	CE-32898-0		Socket is in blocking state
	CE-32899-1		Received a fatal alert message from server / Cannot connect to server // Step 1: Reboot the PS4. Step 2: Restart router. Step 3: Contact ISP to check Internet connection status. Step 4: Reset router and select [Settings] > [Network] > [Set Up Internet Connection] and reconnect to the router. For details, refer to instructions supplied with the router. Step 5: Update router firmware to the latest version. Step 6: Check connection status of the PS4 in a connection test. Step 7: Make sure these port numbers are not blocked by the router: TCP: 80, 443, 3478, 3479, 3480; UDP: 3478, 3479. Step 8: If unable to connect to a service outside PSN, check the status of that service. Step 9: PSN may be temporarily busy, try again later. Check PSN status here.
	CE-32900-4		Called API with prohibited options
	CE-32901-5		Internal error
	CE-32902-6		Not initialized
	CE-32903-7		Already initialized
	CE-32904-8		Cannot allocate memory
	CE-32905-9		Invalid argument
	CE-32906-0		Operation not supported
	CE-32907-1		No events are available
	CE-32908-2		Not logged in
	CE-32909-3		Insufficient buffer space to store information
	CE-32920-6		Download cancelled because content does not need to be downloaded // Step 1: Select [OK] on the error message. Then go to [Settings] > [PSN] > [Restore License] and try restoring the licenses. Step 2: Next, go to the home screen to select the game icon. Check that the purchased item is available in the game. If you have purchased a subscription item (i.e. season pass), go to [Settings] > [PSN] > [Account Information] > [Services List] to see if the item has been activated. Step 3: If you cannot find the item, restart the PS4 system and try Step 2 again.
	CE-32921-7		System cannot read the disc // Step 1: Eject the disc and make sure it is not dirty, scratched, or damaged. Step 2: Make sure the format of the disc is supported by the PS4. If the error persists, turn off the console, reboot in Safe Mode, and choose [Rebuild Database].
	CE-32922-8
	CE-32923-9
	CE-32924-0
	CE-32925-1
	CE-32926-2
	CE-32927-3
	CE-32928-4		Download has been cancelled (issue during download) // Step 1: Check [Notifications] for the content you are trying to download. If the download is stuck, delete the content from [Options], and retry downloading the content from the Library. Step 2: If the download fails again, go to Safe Mode and perform [Rebuild Database]. You can find more information on Safe Mode here. Step 3: If the error occurs again, initialize the PS4 in Safe Mode (back up your data before performing this).
	CE-32930-7		Downloaded data on HDD may be corrupted // Delete the content and download it again.
	CE-32937-4		Failed to download data // Step 1: Check the distribution period for the content you are trying to download. Step 2: Cancel the download. Step 3: If the error persists, the network connection may be temporary busy or unstable. Try again later.
	CE-32939-6		Connection to server failed // Step 1: Restart the PS4. Step 2: PSN or the game's server may be temporarily unavailable. Check the status of the game's server at its website. Check the status of PSN here. Step 3: If the servers are active, run the internet connection test and make sure that you can connect to the internet. Step 4: Update router to the latest firmware. Turn off other devices that are connected to the network to reduce stress. Step 5: Make sure these port numbers are not blocked by the router: TCP: 80, 443, 3478, 3479, 3480; UDP: 3478, 34. If none of this resolve the problem then try again later as the server may be experiencing high volume.
	CE-32942-0		The extension of the URL specified with "Download a Package" > "Package URL" or the extension of content_url specified with content_list.json may not be .pkg/.PKG. Check that the URL extension of the content is .pkg/.PKG
	CE-32943-1
	CE-32944-2
	CE-32945-3		The Content ID specified with "Download a Package" >"Content ID" or the id specified with content_list.json may not be matching the Content ID of the package file. Check the specification of "Download a Package" > "Content ID" and the Content ID of PARAM.SFO.
	CE-32946-4
	CE-32947-5		Could not download the file // Step 1: Try the Internet connection test at [Settings] > [Network] > [Test Internet Connection]. Check that the internet status is valid. Step 2: Delete the content (if it is shown in content area), and try redownloading the content from Library. Step 3: If the error occurs again, please visit our Contact page to contact SCEA for additional technical support.
	CE-32951-0		Network connection problem occurred // Step 1: Check that PSN services are available. Step 2: If PSN is available, perform a connection test. Step 3: Make sure router firmware/software is up to date.
	CE-32957-6		The Content ID specified with "Download a Package" >"Content ID", the id specified with content_list.json, or the Content ID of the package file is of an invalid format. Check the specified Content ID and the Content ID of PARAM.SFO.
	CE-32958-7		Data may be corrupted // Backup save data, delete the application and try re-installing it again.
	CE-33069-1		Canceled
	CE-33070-3		Not Accept
	CE-33071-4		Busy
	CE-33072-5		No Initialize
	CE-33073-6		Multiple Initialize
	CE-33074-7		No Memory
	CE-33075-8		File Not Found
	CE-33076-9		Not Supported Format
	CE-33077-0		Large Title
	CE-33078-1		Large Comment
	CE-33079-2		Invalid Parameter
	CE-33080-4		Disk Full
	CE-33081-5		Execution Max
	CE-33096-1		Issue uploading data // Step 1: Check if the data has been already uploaded. Step 2: Turn off the route for 5 minutes, then back on. Step 3: Try again later.
	CE-33103-0		Cannot be shared to social networking services (initial setup of YouTube account not complete or YouTube account needs to be upgraded) // Step 1: Go to [Settings] > [Account Management] > [Link with Other Services] > [YouTube] and sign out, then sign in again. Step 2: Sign in to the official YouTube page from a browser on your computer or PS4 console, and make sure your account is upgraded.
	CE-33105-2		Set the wrong parameter
	CE-33106-3		Not initialized save data library yet
	CE-33107-4		Out of memory
	CE-33108-5		Savedata directory has already been mounted / Error occurred while reading data (data failed to load) // Step 1: From the home screen, highlight the application, press the OPTIONS button and close the application. Step 2: Restart the application. Step 3: Reboot the console. Step 4: If the situation does not improve, back up your saved data from [Settings] > [Application Saved Data Management] and initialize the console from [Settings] > [Initialization] > [Initialize PS4].
	CE-33109-6		Savedata directory is not mounted
	CE-33110-8		Savedata permission denied
	CE-33111-9		Savedata fingerprint mismatch
	CE-33112-0		Savedata already exists
	CE-33113-1		Savedata not found
	CE-33114-2		Not enough space for writing savedata at mount point
	CE-33115-3		Not enough space for mounting savedata at file system
	CE-33116-4		Error occurred in the system // Reboot the console. Start the console and safe mode and select option 5 [Rebuild Database]. Back up save data and initialize the console.
	CE-33117-5		Reached mount max
	CE-33118-6		Not mounted for writing
	CE-33119-7		File not found
	CE-33120-9		Savedata broken
	CE-33121-0		Inhibit during mount
	CE-33122-1		Invalid login user
	CE-33123-2
	CE-33124-3
	CE-33125-4		Unknown error
	CE-33126-5		Invalid parameter / Cannot continue broadcasting. Texts or the settings associated with this channel may not be valid. (broadcast description too long) // Make sure the description of the YouTube Broadcast has less than 200 characters.
	CE-33127-6		Not callable status
	CE-33128-7		Game live streaming Not initialized
	CE-33129-8		Encoder error
	CE-33130-0		Out of memory
	CE-33155-7		Unexpected internal error occurs
	CE-33156-8		The system service is not available
	CE-33157-9		Parameter is invalid
	CE-33158-0		There's no event to receive
	CE-33159-1		The function is rejected
	CE-33160-3		Safe area information have not adjusted
	CE-33177-1		Cannot start the application // Application data may be corrupted
	CE-33179-3		Application is not found // Retry after the installation is completed. Installation of add-ons fails until the installation of application installation is complete.
	CE-33191-7		Insert the correct disc into the PlayStation 4 system // Application requires that the disc be inserted into the console
	CE-33199-5		You must update your system to version 1.06 or higher. Actual version: 1.01 If applications are running, choose [update later] and save your progress in the application.
	CE-33210-9		Invalid argument
	CE-33211-0		Resource temporarily unavailable
	CE-33212-1		Not enough core
	CE-33213-2		Resource reset
	CE-33214-3		No space left on device
	CE-33215-4		No data is available
	CE-33216-5		File table overflow
	CE-33217-6		Device busy
	CE-33218-7		Process Interrupted
	CE-33219-8		Insufficient memory
	CE-33220-0		Fatal error
	CE-33221-1		Specified parameter is not appropriate
	CE-33222-2		File open error
	CE-33223-3		File write error
	CE-33224-4		Function not called in a proper state
	CE-33225-5		Recording is interrupted
	CE-33226-6		internal error
	CE-33227-7		invalid handle
	CE-33228-8		invalid pointer
	CE-33229-9		invalid channel
	CE-33230-1		invalid sampling rate
	CE-33231-2		invalid bit rate
	CE-33232-3		invalid input format
	CE-33233-4		invalid output format
	CE-33234-5		invalid input size
	CE-33266-0		Undefined error
	CE-33267-1		Unpredictable error occurrence
	CE-33268-2		Failure in memory allocation
	CE-33269-3		Improper parameter
	CE-33270-5		Incorrect processing executed
	CE-33271-6		Library uninitialized
	CE-33272-7		Already initialized
	CE-33273-8		No event to get
	CE-33274-9		Undefined error other than the following
	CE-33275-0		Unexpected error occurred
	CE-33276-1		Could not allocate memory
	CE-33277-2		Specified parameter is inappropriate
	CE-33278-3		Library is not initialized
	CE-33279-4		Already initialized
	CE-33280-6		Package is already open
	CE-33281-7		Package is not open
	CE-33282-8		Specified PlayGo handle is invalid
	CE-33283-9		Specified variable value is NULL
	CE-33284-0		Specified size value is invalid
	CE-33285-1		Specified chunk ID value is invalid
	CE-33286-2		Specified speed value is invalid
	CE-33287-3		Application does not support PlayGo
	CE-33288-4		This operation is not permitted
	CE-33289-5		Specified locus value is invalid
	CE-33319-9		Cannot download the video/screenshot as you have reached to the service limit // Check upload policy of the service provider. If using Dailymotion, check their Upload Policy and try again after 24 hours.
	CE-33327-8		PS VR USB error // Turn off PS4 and unplug it for two minutes. Plug it back in. Remove USB cable from PS4 and PSVR and reinsert it. Reboot the PS4.
	CE-33329-0		pAttr is NULL for S3dConversionQueryAttr()
	CE-33330-2		pRsrc is NULL for S3dConversionOpen()
	CE-33331-3		*pRsrc setting is invalid for S3dConversionOpen()
	CE-33332-4		pHandle is NULL for S3dConversionOpen()
	CE-33333-5		Allocated memory is invalid for S3dConversionOpen()
	CE-33334-6		handle is NULL for S3dConversionClose()
	CE-33335-7		*handle is invalid for S3dConversionClose()
	CE-33336-8		Converting and cannot close with S3dConversionClose()
	CE-33338-0		handle is NULL for S3dConversionExec()
	CE-33339-1		*handle is invalid for S3dConversionExec()
	CE-33340-3		pInPicInfo is NULL for S3dConversionExec()
	CE-33341-4		*pInPicInfo setting is invalid for S3dConversionExec()
	CE-33342-5		pCtrl is NULL for S3dConversionExec()
	CE-33343-6		*pCtrl setting is invalid for S3dConversionExec()
	CE-33344-7		pOutInfoL and pOutInfoR are NULL for S3dConversionExec()
	CE-33345-8		*pOutInfoL setting is invalid for S3dConversionExec()
	CE-33346-9		*pOutInfoR setting is invalid for S3dConversionExec()
	CE-33347-0		pOutInfoL target is NULL for S3dConversionExec()
	CE-33348-1		*OutInfoL target setting is invalid for S3dConversionExec()
	CE-33349-2		pOutInfoR target is NULL for S3dConversionExec()
	CE-33350-4		*OutInfoR target setting is invalid for S3dConversionExec()
	CE-33351-5		Error during command generation for S3dConversionExec()
	CE-33352-6		Not initialized
	CE-33353-7		invalid pointer
	CE-33354-8		invalid value
	CE-33355-9		invalid argument
	CE-33356-0		The feature is not supported
	CE-33357-1		The clock is not available
	CE-33358-2		error occured in parsing
	CE-33359-3		The year value is invalid
	CE-33360-5		The month value is invalid
	CE-33361-6		The day value is invalid
	CE-33362-7		The hour value is invalid
	CE-33363-8		The minute value is invalid
	CE-33364-9		The second value is invalid
	CE-33365-0		The microsecond value is invalid
	CE-33383-0		Issue connecting to the network // Step 1: Sign out of PSN and then back in. Step 2: Reboot the console. Step 3: Turn off the router for 5 minutes, then turn it back on. Step 4: Try again later.
	CE-33384-1		Issue with the network connection // Step 1: Perform an internet connection test by selecting [Settings] > [Network] > [Test Internet Connection] and review and configure your network settings again if necessary. Step 2: Turn off your router and modem, and wait at least 5 minutes, then restart it. Step 3: Update your router to the latest firmware.
	CE-33402-2		CommonDialogInitialize is not running
	CE-33403-3		CommonDialogInitialize is already running
	CE-33404-4		The Common Dialog has not been initialized
	CE-33405-5		The Common dialog is already initialized.
	CE-33406-6		The Common Dialog is not finished
	CE-33407-7		It's the state that is unable to call the API.
	CE-33408-8		As a result of the common dialog does not exist
	CE-33409-9		Another Common Dialog is in use
	CE-33410-1		There is not enough memory
	CE-33411-2		It is an invalid parameter
	CE-33412-3		The Common Dialog is not running.
	CE-33413-4		The Common dialog is already closed.
	CE-33414-5		Invalid NULL pointer has been specified in argument
	CE-33415-6		Unexpected fatal error occurred / Error occurred // Step 1: Reboot the console. Step 2: If the error occurs when reading saved data, copy saved data to PlayStation Plus online storage or a USB drive, then restore it to the console. Step 3: If the situation does not improve, delete and reinstall the application.
	CE-33416-7		you use unsupported features.
	CE-33417-8		Not enough memory to run
	CE-33418-9		Parameter is invalid
	CE-33419-0		Dictionary data is invalid
	CE-33420-2		Hand angle is out of range
	CE-33426-8		Parameter is invalid
	CE-33427-9		updateMode is invalid
	CE-33428-0		executionMode is invalid
	CE-33429-1		pixelFormat is invalid
	CE-33430-3		imageType is invalid
	CE-33431-4		handle is invalid
	CE-33432-5		memory alignment is invalid
	CE-33433-6		aspect is invalid
	CE-33434-7		size parameter is invalid
	CE-33435-8		reserved parameter is invalid
	CE-33436-9		pointer address is invalid
	CE-33437-0		resolution parameter is invalid
	CE-33438-1		camera type is invalid
	CE-33439-2		parameter range is invalid
	CE-33440-4		Not enough memory
	CE-33441-5		Could not created instance
	CE-33442-6		Calibration is necessary
	CE-33443-7		Fatal error occurred
	CE-33444-8		Already running IME
	CE-33445-9		supportedLanguages value is invalid
	CE-33446-0		Memory is insufficient
	CE-33447-1		Connection with IME has failed
	CE-33448-2		Too many requests for IME
	CE-33449-3		Content of text is invalid
	CE-33450-5		Event is overflowed
	CE-33451-6		User ID value is invalid
	CE-33452-7		type value is invalid
	CE-33453-8		supportedLanguages value is invalid
	CE-33454-9		enterLabel value is invalid
	CE-33455-0		inputMethod value is invalid
	CE-33456-1		option value is invalid
	CE-33457-2		maxTextLength value is invalid
	CE-33458-3		inputTextBuffer value is invalid
	CE-33459-4		posx value is invalid
	CE-33460-6		poxy value is invalid
	CE-33461-7		horizontalAlignment value is invalid
	CE-33462-8		verticalAlignment value is invalid
	CE-33463-9		extended value is invalid
	CE-33464-0		work value is invalid
	CE-33465-1		arg value is invalid
	CE-33466-2		handler value is invalid
	CE-33467-3		no resource ID
	CE-33468-4		mode value is invalid
	CE-33469-5		An invalid parameter has been specified
	CE-33470-7		An invalid address has been specified
	CE-33471-8		reserved value is invalid
	CE-33472-9		internal error
	CE-33473-0		title value is invalid
	CE-33474-1		Called during a period other than
	CE-33475-2		Called during a period other than
	CE-33476-3		ImeDialogInit() is not called
	CE-33485-3		Parameter error
	CE-33486-4		Insufficient memory
	CE-33487-5		File not found
	CE-33488-6		Invalid file format
	CE-33489-7		Insufficient storage capacity
	CE-33490-8		Other internal error
	CE-33498-7		Invalid data
	CE-33544-9		decoder API failed
	CE-33545-0		invalid codec type
	CE-33546-1		invalid struct size
	CE-33547-2		invalid decoder handle
	CE-33548-3		invalid size of CPU memory
	CE-33549-4		invalid pointer for CPU memory
	CE-33550-6		invalid size of CPU/GPU memory
	CE-33551-7		invalid pointer for CPU/GPU memory
	CE-33552-8		invalid pointer for shader context
	CE-33553-9		invalid access unit size
	CE-33554-0		invalid pointer for access unit
	CE-33555-1		invalid frame buffer size
	CE-33556-2		invalid pointer for frame buffer
	CE-33557-3		invalid frame buffer alignment
	CE-33558-4		invalid value in VideodecConfigInfo
	CE-33559-5		invalid argument pointer
	CE-33585-4		Not initialized.
	CE-33586-5		Already initialized.
	CE-33587-6		Invalid argument.
	CE-33588-7		Invalid Pad library handle.
	CE-33598-8		Invalid arguments passed to the submit function
	CE-33599-9		Not enough resources to submit the command buffers; try to split reduced the number of DCB/CCB to submit at once
	CE-33600-2		Prepare Flip hasn't been called
	CE-33601-3		Flip queue full
	CE-33602-4		Flip request failed
	CE-33603-5		Internal Error
	CE-33604-6		Not setting compatible PS and MRT formats can cause unexpected or corrupt rendering results.
	CE-33605-7		The address of a V# is invalid
	CE-33606-8		The address of a T# is invalid
	CE-33607-9		The address of either a T# or a V# is invalid
	CE-33608-0		The address of a resource sampler constant buffer or global table is invalid
	CE-33609-1		A Gnm::writeAtEndOfPipe() function was called with an invalid EndOfPipeEventType
	CE-33610-3		The address of the index buffer is invalid
	CE-33611-4		The tessellation factor buffer is invalid
	CE-33612-5		The scratch ring is invalid
	CE-33613-6		The primitive type is not set before a draw call
	CE-33614-7		The index size is not set before an indexed draw call
	CE-33615-8		The size of the inlined buffer of a drawIndexInline is incorrect
	CE-33616-9		In order to use patches the number of patches must be set via the Gnm::TessellationRegisters
	CE-33617-0		Gnm::DrawCommandBuffer::setGsMode() is called with GsMode kGsModeDisable when Gnm::DrawCommandBuffer::setActiveShaderStages() has the GS stage disabled
	CE-33618-1		An enabled shader has an invalid address
	CE-33619-2		Validation not enabled. Please make sure to enable "PA Debug" and "ValidateGPU" in target manager.
	CE-33620-4		Cannot open the specified file for writing.
	CE-33621-5		Cannot capture if Razor is not enabled.
	CE-33622-6		The command buffer being captured is empty.
	CE-33623-7		Internal error.
	CE-33624-8		Pipe id must between 0 or 3 (inclusive).
	CE-33625-9		Queue id must between 0 or 7 (inclusive).
	CE-33626-0		Invalid Ring Size (must be multiple of DW and a power of 2).
	CE-33627-1		Ring Base Address must be 256 bytes aligned.
	CE-33628-2		Read Ptr Address must be 4 bytes aligned.
	CE-33629-3		Internal error.
	CE-33630-5		Invalid Argument in Dispatch Draw.
	CE-33631-6		Out of space for index data in dispatch draw.
	CE-33632-7		Out of space for block offset in dispatch draw.
	CE-33633-8		Unrepresentable offset in dispatch draw.
	CE-33634-9		The operation failed due to an invalid argument.
	CE-33635-0		The operation failed due to an internal tiling error.
	CE-33647-3		Texture format isn't BC1 - BC7. Or vmBuffer is NULL.
	CE-33648-4		BC Encoder is NULL.
	CE-33649-5		kBlockEncoderBufferSize is too small we need to make it bigger.
	CE-33650-7		some pointers may be invalid and encoder may not be initialized.
	CE-33651-8		Texture dimentions should match the srcTexture dimensions. Format should match the encoder format
	CE-33652-9		not enough room for extendedUserData in dcb
	CE-33653-0		The operation failed because a NULL pointer was passed to write to.
	CE-33654-1		The operation failed because the file was not a valid GNF file.
	CE-33655-2		The operation failed because the size value for the file header contents is not valid.
	CE-33656-3		The operation failed because the file size is too small to contain the contents of the file.
	CE-33657-4		The operation failed because the GNF version does not match current GNF version in the Texture Library.
	CE-33658-5		The operation failed because the alignment value is out of range. It can range between 0 and 31.
	CE-33659-6		The operation failed because the size of the file contents defined in the header does not match the computed size of the file contents.
	CE-33660-8		The operation failed because the GNF file could not be opened for reading/appending.
	CE-33661-9		The operation failed because the file size does not match the stream size of the GNF file contents
	CE-33672-1		Not initialized.
	CE-33673-2		Invalid parameter.
	CE-33674-3		Contents already mounted.
	CE-33675-4		Contents not mounted.
	CE-33676-5		Item corrupted or cannot be detected by the system // If getting this error when selecting a theme, try deleting and downloading it again; for other content, make sure you have the license to the content; if you have the content and are still getting the error, download the content again, go to [Settings] > [PSN] > [Restore Licenses], then reboot in Safe Mode and select [Rebuild Database].
	CE-33677-6		Reached mount max.
	CE-33678-7		Not entitled to the additional content (data from previous save doesn't match current data) // Step 1: Go to [Settings] > [Account Management] and select [Restore License]. Step 2: Deactivate your system and activate it again from [Settings] > [Account Management] > [Activate as Your Primary PS4].
	CE-33679-8		Not enough space in HDD.
	CE-33680-0		Not supported.
	CE-33681-1		invalid argument
	CE-33682-2		invalid port
	CE-33683-3		invalid handle
	CE-33684-4		already opened the port.
	CE-33685-5		library uninitialized.
	CE-33686-6		fatal error
	CE-33687-7		An internal error occurred in the utility.
	CE-33688-8		Without signing in the functionality of Facebook cannot be used.
	CE-33689-9		User permissions could not be obtained
	CE-33690-1		Due to UGM restriction the functionality of Facebook cannot be used.
	CE-33691-2		invalid argument
	CE-33692-3		invalid status
	CE-33693-4		invalid status Core IF
	CE-33694-5		stream full
	CE-33695-6		not exist streamId
	CE-33696-7		can not allocate memory
	CE-33697-8		can not use this api. use other api
	CE-33698-9		timeout error
	CE-33699-0		request full
	CE-33700-3		not exist requestId
	CE-33701-4		registered callback full
	CE-33702-5		resource handle full
	CE-33703-6		not exist resource handle
	CE-33704-7		can not acquire decoder resource
	CE-33705-8		invalid argument Core
	CE-33706-9		not exist stream
	CE-33707-0		not playable
	CE-33708-1		error stop
	CE-33709-2		invalid argument Core IF
	CE-33710-4		not registered video core function
	CE-33711-5		sce function error
	CE-33712-6		kernel function error
	CE-33713-7		ipmi inter process communication error
	CE-33714-8		ipmi inter process communication error Core IF
	CE-33715-9		internal program error
	CE-33716-0		invalid status Core
	CE-33717-1		sce function error Core
	CE-33718-2		kernel function error Core
	CE-33719-3		ipmi inter process communication error
	CE-33720-5		internal program error Core
	CE-33743-0		Connection to server failed // The PS4 was unable to connect to the server. Please try again later. You can check the status of the PSN here.
	CE-33755-3		invalid argument
	CE-33756-4		invalid port
	CE-33757-5		invalid handle
	CE-33758-6		already opened the port.
	CE-33759-7		library uninitialized.
	CE-33760-9		fatal error
	CE-33844-2		Undefined error
	CE-33845-3		Unpredictable error occurrence
	CE-33846-4		Failure in memory allocation
	CE-33847-5		Improper parameter
	CE-33848-6		Incorrect processing executed
	CE-33849-7		Library uninitialized
	CE-33850-9		Already initialized
	CE-33851-0		No events to obtain
	CE-33852-1		Perform default operations without setting an HTTP response
	CE-33853-2		HTTP server is already started
	CE-33854-3		HTTP server is not started
	CE-39935-9		Connection to server failed
	CE-33937-5		Cannot use the content. To use the content, purchase it from PSS // Content can only be used by users who have a license for it; change user or purchase it outright from PSS to use the content.
	CE-33945-4		Server connection has failed (possible problem connecting to local network) // Step 1: PSN or game servers may be temporarily unavailable. Make sure these are available. Step 2: If both services are active, perform a connection test to confirm that you can connect to the Internet. Step 3: Update router firmware (contact router manufacturer or your ISP for assistance if required). Turn off other devices connected to the network. If still experiencing difficulties then try again later as the server may be experiencing high traffic.
	CE-33950-0		Could not connect to the server to verify the license // There may be an issue with the server, try again later.
	CE-33951-1		Unknown error. This value should not be used.
	CE-33952-2		The specified port does not exist.
	CE-33953-3		The specified object does not exist.
	CE-33954-4		An invalid parameter was passed.
	CE-33955-5		Not enough memory to perform the operation.
	CE-33956-6		Not enough resources to perform the operation.
	CE-33957-7		The operation cannot be performed at the moment.
	CE-33958-8		Too many channels specified.
	CE-33983-6		Internet connection test error // Retry the Internet connection test. It's also possible that the PSN may be be undergoing maintenance. You can check the status of the PSN here.
	CE-33984-7		Connection test timed out while attempting to obtain IP address (connection issues or incorrect settings) // 1) Go to [Settings] > [Network]. 2) Select [Test Internet Connection]. 3) Reboot the console and use a wired (ethernet) connection if possible. 4) If using a Wi-Fi connection, move the console closer to the route and remove anything interrupting the connection between the devices. 5) Turn off router for at least 5 minutes, then restart it. 6) If the IP address cannot be obtained, check internet connection settings again.
	CE-33985-8		Internet connection test error // Retry the Internet connection test. It's also possible that the PSN may be be undergoing maintenance. You can check the status of the PSN here.
	CE-33986-9		Internet connection test error (PSN down or unable to connect to internet) // PSN may be temporarily down or undergoing maintenance. Check PSN status. If PSN is up, perform an Internet connection test to confirm that you can connect to the Internet.
	CE-33987-0		Possible issue connecting to PSN (connection timed out during sign-in process) // 1) Perform a connection test to confirm you can connect to the network. 2) If still unable to connect, try resetting your local network connection by turning off the modem and/or router for 5 minutes and then turn it back on. 3) If this hasn't helped, you may need to update your router's firmware (contact ISP or router manufacturer for assistance if needed). If still having issues, then try again later as the server may be experiencing high traffic.
	CE-33988-1		Internet connection test error // Retry the Internet connection test. It's also possible that the PSN may be be undergoing maintenance. You can check the status of the PSN here.
	CE-33989-2		Internet connection test error // Retry the Internet connection test. It's also possible that the PSN may be be undergoing maintenance. You can check the status of the PSN here.
	CE-33990-4		Internet connection test error // Retry the Internet connection test. It's also possible that the PSN may be be undergoing maintenance. You can check the status of the PSN here.
	CE-33991-5		Could not connect to the network (possible problem connecting to local network) // Step 1: PSN or game servers may be temporarily unavailable. Make sure these are available. Step 2: If both services are active, perform a connection test to confirm that you can connect to the Internet. Step 3: Update router firmware (contact router manufacturer or your ISP for assistance if required). Turn off other devices connected to the network. If still experiencing difficulties then try again later as the server may be experiencing high traffic.
	CE-33992-6		Internet connection test error (PSN down or network download speed too slow) // Check status of PSN services by visiting the status page on a connected device. If services are available (all show green) and you are still getting the error, your home network's download speed may be too slow. We recommend a minimum download speed of 5 mbps. If your speeds are slower than this, try connecting to an alternative connection with a download speed of at least 5 mbps. If still having problems, visit the PlayStation Repairs tool for more troubleshooting advice.
	CE-33994-8		The Dialog has not been initialized
	CE-33995-9		The Dialog is already initialized.
	CE-33996-0		It is an invalid parameter
	CE-33997-1		Unexpected fatal error occurred
	CE-33998-2		It's the state that is unable to call the API.
	CE-33999-3		It's the service state that is unable to call the API.
	CE-34000-7		Invalid user ID was specified.
	CE-34001-8		Not initialized.
	CE-34002-9		Already initialized.
	CE-34003-0		Invalid argument.
	CE-34004-1		Invalid Move library handle.
	CE-34005-2		Invalid Move library handle.
	CE-34006-3		Invalid port.
	CE-34007-4		Already opened the port.
	CE-34008-5		Fatal error.
	CE-34009-6		Not initialized.
	CE-34010-8		Already initialized.
	CE-34011-9		Invalid argument.
	CE-34012-0		Invalid Move library handle.
	CE-34101-9		PsvrCreateFromUncompress() or PsvrCreateFromCompress() failed.
	CE-34102-0		Invalid tuning options.
	CE-34103-1		Memory operation failed.
	CE-34104-2		Memory leak.
	CE-34105-3		Save compact CPR failed.
	CE-34106-4		Create compress CPR failed.
	CE-34107-5		Create GnD failed.
	CE-34108-6		PsvrStart() failed.
	CE-34109-7		Invalid argument.
	CE-34110-9		Insufficient resources.
	CE-34111-0		PSVR library has not been initialized.
	CE-34112-1		PSVR library has been initialized.
	CE-34113-2		Invalid PSVR result.
	CE-34127-7		invalid argument
	CE-34128-8		memory allocation error
	CE-34149-1		A file could not be opened
	CE-34150-3		A problem occurred reading a file
	CE-34151-4		Memory could not be allocated to load a file
	CE-34152-5		A Bank is not aligned on a 16-byte boundary
	CE-34153-6		A file has an invalid format
	CE-34154-7		A Bank at the specified memory address is already loaded
	CE-34155-8		Scream is already initialized or that initialization failed
	CE-34156-9		Scream is not currently running
	CE-34157-0		Underlying synthesizer failed to initialize
	CE-34158-1		Invalid parameter detected
	CE-34159-2		Unknown system error
	CE-34160-4		Unable to allocate memory
	CE-34161-5		Unable to create a thread
	CE-34162-6		Sndstream has already been initialized
	CE-34163-7		Some specified parameter(s) are out of range
	CE-34164-8		An unknown error occurred
	CE-34165-9		Sndstream has not been initialized
	CE-34166-0		A specified file was not found
	CE-34167-1		A specified file was found but contained invalid data
	CE-34168-2		A specified file type is not supported
	CE-34169-3		Sndstream failed to seek in or read from file
	CE-34170-5		An unexpected internal error
	CE-34171-6		The specified reference is not recognized
	CE-34172-7		A parameter index is out of range
	CE-34173-8		A specified address was NULL
	CE-34174-9		The version of a specified data structure is not supported
	CE-34175-0		Data with incorrect endianness was used
	CE-34176-1		A voice could not be allocated for this data
	CE-34177-2		A resource could not be allocated
	CE-34178-3		The handle or other object is no longer active
	CE-34179-4		A buffer or other resource is not big enough
	CE-34180-6		Sndstream has not been initialized
	CE-34181-7		Server failed to initialize
	CE-34182-8		Invalid Bank pointer error
	CE-34183-9		Operation requested before server initialization
	CE-34184-0		The file I/O system passed on (omitted) a read request
	CE-34185-1		An error of unknown origin occurred
	CE-34186-2		A file open error occurred
	CE-34187-3		A file seek error occurred
	CE-34188-4		A file read error occurred
	CE-34189-5		A file close error occurred
	CE-34224-5		PFS Corrupt / Integrity check error / System error has occurred // Step 1: Back up your data from [Settings] > [Application Saved Data Management]. Step 2: Go to [Settings] > [Initialization] > [Initialize PS4]. Step 3: Restore your data. Step 4: If the error persists, there may be an issue with the HDD or the console. If the HDD has been replaced, try installing another HDD or reinstalling the original HDD.
	CE-34225-6		File not found in PlayGo chunk definition
	CE-34304-4		HDD data likely corrupted, possibly due to a HDD hardware issue.
	CE-34305-5		Failed to read information from HDD (console can't read some data from the HDD) // 1) Make sure the console has the latest system software (update if needed). 2) If the HDD was upgraded, turn off the console, re-insert the original HDD and try again. 3) If the error persists, try restoring the console to factory settings. 4) If the error persists, console may be bad and in need of service. Contact PlayStation Support.
	CE-34335-8		No HDD detected / "Cannot access system storage" (HDD incorrectly installed, bad/corrupt HDD, bad console) // 1) Turn off the console, unplug it and remove the top cover. 2) Check that the HDD is correctly installed. 3) If still experiencing the error after reinserting the HDD, it may be corrupt or bad or the console may be in need of service. Contact PlayStation Support.
SCE_AUDIO_OUT_ERROR_INVALID_MIXLEVEL	CE-34341-5	0x80260014	Invalid mix level value
SCE_VIDEO_OUT_ERROR_OVERFLOW	CE-34342-6	0x80290017	Overflow
	CE-34348-2		the specified max delay length is invalid
	CE-34349-3		the specified max delay taps is invalid
	CE-34350-5		the specified delay type is invalid
	CE-34351-6		the specified number of delay tap is invalid
	CE-34452-8		Downloaded data may be corrupted // Step 1: Delete the content from home screen, then restart the system. Next, re-download the content from the Library. Step 2: If the error persists, go to [Settings] > [Initialization] > [Initialize PS4] and try the PS4 initialization. Step 3: If the error occurs again there may be an issue with the PS4's hard drive (HDD). If you have previously changed the HDD, use the other HDD. If not, please visit our Contact page to contact SCEA for additional technical support.
	CE-34544-0		Information required to start the application cannot be found (corrupted database or corrupted application) // Step 1: Make sure the PS4 has the latest system software (update if needed). // Step 2: Install the latest update for the application. Step 3: If the issue persists, reboot the PS4 in Safe Mode and select [Rebuild Database]. Step 4: If Step 3 did not solve the problem, back up all saved data and re-install the application.
	CE-34545-1		Read timeout occurred
	CE-34568-5		System error // Reboot the console. Start the console in Safe Mode and select option 5 [Rebuild Database]. Back up saved data and initialize the console.
	CE-34615-9		Not Implemented
	CE-34627-2		Cannot install
	CE-34632-8		Content unavailable // Content cannot be used at the moment. Contact PlayStation Support.
	CE-34635-1		invalid previous input size
	CE-34674-4		Cannot install
	CE-34687-8		pContextRsrc is NULL for S3dConversionExec()
	CE-34688-9		*pContextRsrc setting is invalid for S3dConversionExec()
	CE-34689-0		Allocated memory is invalid for S3dConversionExec()
	CE-34693-5		Application is not active
	CE-34698-0		Using a RW buffer or texture but setting the memory type to read-only via setResourceMemoryType(). This is determined by checking RWResource inputs to shaders against the RO bit set in the Vsharp or Tsharp.
	CE-34699-1		stream suspended
	CE-34700-4		stream aborted
	CE-34712-7		Invalid PSVR pointer.
	CE-34772-3		Invalid argument
	CE-34773-4		The path is not in a mapped location
	CE-34774-5		File not found
	CE-34775-6		Fatal error
	CE-34776-7		Resource not found
	CE-34777-8		Try again
	CE-34778-9		Bad address
	CE-34779-0		Invalid argument
	CE-34780-2		Operation results timed out
	CE-34781-3		Not initialized
	CE-34782-4		Library has been initialized
	CE-34783-5		Fatal error
	CE-34788-0		This update file cannot be used (incorrect file used for update) // Make sure you have downloaded the correct file. Check that the folder names and file names are correct. Enter the folder name and file names using uppercase letters.
	CE-34861-2		A network error has occurred (PSN down or no SSL) // Step 1: Check PSN status for any outages or maintenance. Step 2: If PSN is available, your network environment might not have a secure SSL deployed (most games require SSL to communicate with the game servers). Contact your ISP to confirm and/or resolve this.
	CE-34867-8		Other disc inserted // Insert the correct disc and relaunch the game.
	CE-34876-8		This disc is not supported by the PS4
	CE-34877-9		Cannot play PlayStation 3 format disc
	CE-34878-0		Error has occurred with the application (shows up after a game crashes) // Step 1: Close the application, install the latest system software and game updates and reboot the console. Step 2: If you upgraded the HDD, re-install the original HDD. Step 3: If the error occurs again, back up all saved data and initialize the console. Step 4: If the error occurs with every application or as soon as the application starts, contact PlayStation Support.
	CE-35230-3		Network error. Response speed from DNS server is likely delayed. // Step 1: Go to [Settings] > [Network] > [Set Up Internet Connection] > [Custom] and change the DNS settings.
	CE-35239-2		Software update required to use network features // Update console to the latest system software.
	CE-35287-5		Cannot connect to the server // PSN or the game server is temporarily unavailable. Try again later.
	CE-35327-0		Unable to connect to the server (PSN is overloaded) // PSN is experiencing high traffic and is temporarily unavailable. Try again later.
	CE-35340-5		This service may be under maintenance. Wait a short while before attempting to access this service again // If this error occurs every time you attempt to connect, log out of the service and then log back in.
	CE-35406-8		PS4 and PS Vita could not be linked for Remote Play because accounts linked on PSN are not the same // To use Remote Play, the same account must be linked to both systems.
	CE-35413-6		PIN code for Remote Play is incorrect // Make sure to enter the correct PIN code.
	CE-35451-8		Error occurred when connecting to the server // Step 1: Restart the PS4. Step 2: If the error persists, there may be an ongoing server issue. Try again later. Step 3: Check PSN status.
	CE-35463-1		The disc cannot be played // Step 1: Copied media, CD's, and 3D Blu-Ray movies cannot be played. Please verify that the type of disc you're trying to play is supported by the PS4. Step 2: Make sure the disc you're trying to play isn't dirty, scratched, or otherwise damaged.
	CE-35486-6		System could not read the disc. The disc format may be unsupported, or the disc may be corrupted // Step 1: Eject the disc and make sure it is not dirty, scratched, or damaged. Step 2: Make sure the format of the disc is supported by the PS4. Step 3: If the error persists, turn off and reboot the PS4 in Safe Mode and try rebuilding the PS4's database.
	CE-35489-9		Invalid region // DVD or Blu-Ray disc not supported on the system due to regional restrictions on the disc (for example, playing a EU disc on a North American console?). The region setting of the console is preset and cannot be changed to play a disc.
	CE-35657-6		Cannot start the application. Application data may be corrupted. // Step 1: Go to [Notifications] > [Downloads] and delete the failure notification. Step 2: Back up your data using USB device or PS+ online storage, and then go to Safe Mode to try [5.Rebuild Database]. You can find more information on Safe Mode here. Step 3: If the error occurs again, go to [Settings] > [Initialization] > [7. Initialize PS4 (Reinstall System Software)] and try the PS4 initialization. Note: This requires a USB device with the system update file. Information on updating via USB is located here.
	CE-35662-2		The numbers of chunks for the application and patch do not match. When creating a patch package of a PlayGo supporting application, the number of chunks included in the patch package must be the same as the game directory.
	CE-35888-2		Cannot start the application // Wrong daughterboard in drive, see also : https://www.youtube.com/watch?feature=player_detailpage&v=pPRvG6oRV1E#t=349 / BDP-025
	CE-35918-6		Could not read the disc (bad disc or bad DVD/Blu-Ray player) // 1) Eject the disc and check that it is not dirty or damaged. 2) Insert another PS4 game disc, Blu-Ray or DVD to find out if they work. 3) If other discs can be read without any issues, the disc you are trying to play may be bad and should be replaced. 4) If other discs don't work either, contact PlayStation Support.
SCE_VIDEO_OUT_ERROR_NO_DEVICE	CE-35957-9	0x80290018	Device does not exist
	CE-36244-9		Download has been suspended. Downloaded data may be corrupted // Console error // Step 1: Restart the system and restart the download. Step 2: Downloads can be restarted from the game's icon on the Home Screen or under [Notifications] > [Downloads]. Step 3: If the error occurs again, review local network settings (change to a static IP or try changing the DNS server, try connecting to a different network or try connecting later). Step 4: If the error persists and you have previously changed the HDD, swap to the original HDD and re-install the system software. If using the original HDD, try initializing the PS4. After system initialization, try downloading the content again.
	CE-36249-4		Cannot download this content. It has not reached the download date yet (content not yet available) // Step 1: Try downloading the content when it gets closer to the release date. Step 2: To enable the auto-download feature, go to [Settings] > [System] > [Automatic Downloads and Updates] and enable > [Saved Data and Update File].
	CE-36275-3		Unable to post a comment on a broadcast // Step 1: Ensure that port TCP 6667 is not blocked by the router or network settings. Step 2: The Streaming service may be having server problems. Try again later or check the Streaming service website for more info.
	CE-36329-3		Error has occurred with system software / Console error // Step 1: Make sure that you have the latest system software by selecting [Settings] > [System Software Update]. The system will then reboot. Step 2: If you cannot reach [Settings], go into Safe Mode and update using option 3. Step 3: If the error occurs again, back up all saved data and initialize the console. Step 3: If the error continues, contact PlayStation Support.
	CE-36330-5		Internal error // Completely turn off the PS4 and reboot the system.
	CE-36418-2		Bluetooth device not supported // Device may not be supported by the console. Try using a supported device instead.
	CE-36420-5		Error during Bluetooth connection with console (possible issue with Bluetooth pairing authentication on console) // Step 1: Disconnect the Bluetooth device from the console. Step 2: Reboot the console. Step 3: Try pairing the device with the cable connected.
	CE-36433-9		The original application package specified upon creating the patch package and the original application installed onto the Development Kit/Testing Kit may not be matching. Check that the original application package specified upon creating the patch package is installed on the Development Kit/Testing Kit.
	CE-36485-6		Cannot recognize the USB storage device // Ensure the device is properly inserted in the console. Make sure the storage device is formatted with the supported file system (FAT or exFAT). If "This USB storage device cannot be used" notification pops up when the device is inserted into the console, it is likely an unsupported device.
SCE_VIDEO_OUT_ERROR_UNAVAILABLE_OUTPUT_MODE	CE-37528-5	0x80290019	Unavailable output mode now
	CE-37533-1		Face recognition error // An occurred during face recognition log-in. It is possible that the face data is corrupted. Step 1: Log in to the system, and re-register the face data. Step 2: If the error occurs again, face data of other users on the PS4 system may be corrupted. Log-in to other user and re-register the face data.
	CE-37534-2		Face recognition error // An occurred during face recognition log-in. It is possible that the face data is corrupted. Step 1: Log in to the system, and re-register the face data. Step 2: If the error occurs again, face data of other users on the PS4 system may be corrupted. Log-in to other user and re-register the face data.
	CE-37535-3		Face recognition error // An occurred during face recognition log-in. It is possible that the face data is corrupted. Step 1: Log in to the system, and re-register the face data. Step 2: If the error occurs again, face data of other users on the PS4 system may be corrupted. Log-in to other user and re-register the face data.
	CE-37536-4		Face recognition error // An occurred during face recognition log-in. It is possible that the face data is corrupted. Step 1: Log in to the system, and re-register the face data. Step 2: If the error occurs again, face data of other users on the PS4 system may be corrupted. Log-in to other user and re-register the face data.
	CE-37537-5		Face recognition error // An occurred during face recognition log-in. It is possible that the face data is corrupted. Step 1: Log in to the system, and re-register the face data. Step 2: If the error occurs again, face data of other users on the PS4 system may be corrupted. Log-in to other user and re-register the face data.
	CE-37538-6		Face recognition error // An occurred during face recognition log-in. It is possible that the face data is corrupted. Step 1: Log in to the system, and re-register the face data. Step 2: If the error occurs again, face data of other users on the PS4 system may be corrupted. Log-in to other user and re-register the face data.
SCE_VIDEO_OUT_ERROR_INVALID_OPTION	CE-37573-5	0x8029001A	Invalid option argument
	CE-37700-7		Download cancelled as the content is not available on the PSS // Step 1: Make sure the content you are trying to download is valid and you hold the license for it. Step 2: If you are trying to preload a title that you have pre-ordered, make sure the content is within the downloadable date and try again later.
	CE-37704-1		Download cancelled due to insufficient space on the HDD // Step 1: Try deleting applications from the Home screen. These can be re-downloaded again later. Step 2: If the error persists when downloading an application update file, try deleting the application first, then re-download the content.
	CE-37732-2		The downloaded file was not installed in the system properly. Downloaded data likely corrupted during the download process // Step 1: Delete the content. Step 2: Try to re-download the file. Step 3: If the error persists, go to [Settings] > [Initialization] > [Initialize PS4] and try the PS4 initialization. Step 4: If the error occurs again and you have previously changed the HDD, swap to the original HDD and reinstall the system software. After system re-installation or initialization, try downloading the content again.
	CE-37857-0		PS4 cannot recognize USB storage device // Step 1: Connect the storage device. Step 2: If the storage device is connected but you see this error, disconnect it and reconnect it. Step 3: Select [Sound/Devices] > [Stop Using Extended Storage] and reconnect the device. Make sure it is connected securely. Step 4: Make sure the device is FAT or exFAT formatted. Step 5: If still having issues, see our page on external HDD support.
SCE_AUDIO_OUT_ERROR_INVALID_ARG	CE-38516-3	0x80260015	Invalid argument
SCE_AUDIO_OUT_ERROR_INVALID_PARAM	CE-38517-4	0x80260016	Invalid parameter
SCE_AUDIO_OUT_ERROR_MASTERING_FATAL	CE-38518-5	0x80260200	FATAL ERROR.
SCE_AUDIO_OUT_ERROR_MASTERING_INVALID_API_PARAM	CE-38519-6	0x80260201	Invalid mastering API parameter.
SCE_AUDIO_OUT_ERROR_MASTERING_INVALID_CONFIG	CE-38520-8	0x80260202	Mastering parameter structure is invalid.
SCE_AUDIO_OUT_ERROR_MASTERING_NOT_INITIALIZED	CE-38521-9	0x80260203	Mastering is not initialized.
SCE_AUDIO_OUT_ERROR_MASTERING_INVALID_STATES_ID	CE-38522-0	0x80260204	Mastering state ID is invalid.
SCE_AUDIO_LATENCY_ESTIMATION_ERROR_FATAL	CE-38523-1	0x80260300	Undefined error
SCE_AUDIO_LATENCY_ESTIMATION_ERROR_INVALID_HANDLE	CE-38524-2	0x80260301	Bad value of handle
SCE_AUDIO_LATENCY_ESTIMATION_ERROR_INVALID_POINTER	CE-38525-3	0x80260302	Invalid pointer value
	CE-38604-1		Cannot download the application since a disc version of the same title is installed // Delete the application, then try to start the download. The console will retain the save data for the game, but any add-ons will need to be downloaded again.
	CE-38605-2		Content download failed on console (issue during download) // Delete the download notification and reinstall the application.
	CE-38612-0	0x80990091	Application data on HDD may be partially corrupted // Step 1: Back up all saved data on a USB storage device or in the PlayStation Plus Online Storage. Step 2: Delete and reinstall the application. Step 3: If the error persists, go to [Settings] > [Initialization] > [Initialize PS4] > [Quick] and initialize the console. Then install the application. Step 4: If you have upgraded the HDD, try using the original one.
	CE-38702-0		Unable to acquire information from the server. You might experience network or Internet connection issues // Step 1: Restart your router. Step 2: Reboot the console. Step 3: Contact ISP to check Internet connection status. Step 4: Reset the router and select [Settings] > [Network] > [Set Up Internet Connection] to reconnect to the router. For details, refer to instructions supplied with the router. Step 5: Update router firmware to the latest version. Step 6: Select [Settings] > [Network] > [Test Internet Connection], and then check your Internet connection status. Step 7: PSN may be temporarily busy. Check its status and try again later. Step 8: A firewall or other security measure might be preventing you from connecting to the network. Make sure your network devices do not block the following port numbers: TCP: 80, 443, 3478, 3479, 3480; UDP: 3478, 3479. Step 9: If unable to connect to a service outside PSN, check the status of that service.
	CE-38703-1		Could not connect to the network
	CE-38706-4		Cannot connect to the server // If unable to connect to a service outside PSN, check the status of that service. PSN may be temporarily busy, try again later. Check PSN status. Step 1: Reboot the console. Step 2: Restart your router. Step 3: Contact ISP to check Internet connection status. Step 4: Reset router and select [Settings] > [Network] > [Set Up Internet Connection] and then connect to the router again. For details, refer to instructions supplied with the router. Step 5: Update router firmware to the latest version. Step 6: Select [Settings] > [Network] > [Test Internet Connection], and then check your Internet connection status. Step 7: A firewall or other security measure might be preventing you from connecting to the network. Make sure your network devices do not block the following port numbers: TCP: 80, 443, 3478, 3479, 3480; UDP: 3478, 3479.
SCE_AUDIO_OUT_ERROR_MASTERING_INVALID_FLAGS	CE-39196-8	0x80260205	Specified flags is invalid.
SCE_VIDEO_OUT_ERROR_PORT_UNSUPPORTED_FUNCTION	CE-39197-9	0x8029001B	Unsupported function with the specified port.
	CE-39935-9		Connection to server failed // Step 1: Restart the PS4. Step 2: PSN or the game's server may be temporarily unavailable. Check the status of the game's server at its website. Check PSN status. Step 3: If the servers are active, run the internet connection test and make sure that you can connect to the internet. Step 4: Update router to the latest firmware. Turn off other devices that are connected to the network to reduce stress. Step 5: Make sure these port numbers are not blocked by the router: TCP: 80, 443, 3478, 3479, 3480; UDP: 3478, 34. If none of this resolve the problem then try again later as the server may be experiencing high volume.
	CE-39984-3		PS4 console obtained an IP address but could not connect to the internet // Step 1: Confirm your connection settings and try an Internet connection test. Step 2: If you are using a Wi-Fi hotspot, you may need to log in to the hotspot network in order to connect to the Internet. Step 3: If unable to open the PS4's browser, go to [Settings] > [User's Guide] and the wireless hotspot's login screen will appear.
	CE-39985-4		Connection to server failed // Step 1: Restart the PS4. Step 2: PSN or the game's server may be temporarily unavailable. Check the status of the game's server at its website. Check PSN status. Step 3: If the servers are active, run the internet connection test and make sure that you can connect to the internet. Step 4: Update router to the latest firmware. Turn off other devices that are connected to the network to reduce stress. Step 5: Make sure these port numbers are not blocked by the router: TCP: 80, 443, 3478, 3479, 3480; UDP: 3478, 34. If none of this resolve the problem then try again later as the server may be experiencing high volume.
SCE_VIDEO_OUT_ERROR_UNSUPPORTED_OPERATION	CE-40767-4	0x8029001C	Unsupported operation
	CE-40768-5	0x802A0008
	CE-41489-6		Issue connecting to PSN. The network has likely timed out during the sign-in process.
	CE-41521-3		Bluetooth device cannot be registered // Bluetooth device might not be supported by PS4. Try another supported Bluetooth device.
	CE-41902-6		USB storage device not compatible with the PS4 (incompatible USB device, damaged USB slot or cable, or USB device not connected properly) // Step 1: Make sure the storage device fulfills these requirements: 250 GB minimum, 8 TB maximum capacity, formatted as FAT or exFAT, and USB 3.0 or later. Step 2: If it meets these requirements, try connecting to another USB slot on the console. Step 3: Try using another USB cable if you have one. Step 4: Connect the USB storage quickly and firmly (connecting too slowly may prevent the USB storage from being recognized).
	CE-42288-4		Error while connecting to PSN // Step 1: Try setting up your internet connection again. Step 2: Turn off your router, wait at least 5 minutes, and then turn it back on. Step 3: Try updating your router's firmware (for details on how to update, contact your router vendor). Step 4: Start the PS4 in Safe Mode and select [Rebuild Database].
	CE-42747-4		System software update required // A mandatory system software update is required before you can connect to PSN. Update console to the latest system software.
	CE-46062-8		Application error (issue with the application version) // Step 1: Go to [Library] and highlight the application. Step 2: Press the OPTIONS button and select [Check for Update]. Step 3: If an update is available, follow the instructions to install the update.

E - Exception

Name	Errorcode	Returncode	Remarks
	E-800085D1	0x800085D1	Connection to server failed // The PS4 was unable to connect to the server. Please try again later. Refer to PSN Status.
	E-801809A8	0x801809A8	Detached or Broken / Malfunctional Blu-ray BD-ROM Drives
	E-80411302	0x80411302	Internal error // Step 1: Close the application and restart the system. If this happens while in the PS Store, close the store and retry. Step 2: If the error occurs again, back up your saved data, and then go to [Settings] > [Initialization] and choose [Initialize PS4].
	E-80558337	0x80558337	PS4 cannot recognize the content properly. The registration information of the content may be incorrect // Download the content again. If the error persists, report the title to PlayStation Support.
	E-80AA001A	0x80AA001A	Cannot start the application. Application data may be corrupted.
	E-80E80034	0x80E80034	// PSN connection related error.
	E-80F00800	0x80F00800	Downloaded data may be corrupted // Step 1: Delete the content from home screen and re-download the content from the Library. Step 2: If the error persists, go to [Settings] > [Initialization] > [Initialize PS4] and try the PS4 initialization. Step 3: If the error occurs again there may be an issue with the PS4's hard drive (HDD). If you have previously changed the HDD, use the other HDD. If not, please visit our Contact page to contact SCEA for additional technical support.
	E-82000000	0x82000000	Undefined application error (application requires an update) // Step 1: Restart the application. Step 2: Check for game updates. If none of this solves the problem, contact the game publisher.
	E-82000002	0x82000002	Cannot connect to the PSN server (PSN down) // PSN is temporarily unavailable. Try again later as the PSN may be experiencing high traffic.
	E-82000003	0x82000003	Error occurred // Try again. If the error happens on PS Store, close the store and retry. If the error persists, exit store and Sign-out and Sign-in to PSN at [Settings] > [PSN].
	E-82000028	0x82000028	Credit or debit card information stored on your account is invalid // Step 1: Make sure that your credit card details have been entered correctly. Step 2: Make sure your account address matches the address on your credit card statement. Step 3: If this does not solve your issue, read this article on correcting billing errors.
	E-8200002A	0x8200002A	Credit or debit card information is invalid (credit card information stored on account is invalid) // Step 1: Go to [Settings] > [PSN] > [Account Information] > [Wallet] > [Billing Information] and make sure that your credit card details (including expiration date) have been entered correctly. Step 2: Make sure your account address matches the address on your credit card statement.
	E-8200002E	0x8200002E	Credit card on file is not valid // Make sure your credit card details are entered correctly. Make sure your account address is the same as the address on your credit card statement. If this does not solve the problem, read this article on correcting billing errors.
	E-82000050	0x82000050	Address on file may be invalid, or an unexpected server error occurred // Step 1: Check the PSN status page for any service issues. Step 2: Make sure your home address is entered correctly, and matches the address issued with your credit card. Step 3: The region/country of your credit card needs to be the same as your PSN region/country. Go to [Settings] > [Account Management] > [Account Information] > [Address], delete your home address and enter it again. If the error still persists, the service may be temporarily unavailable. Try again later.
	E-82000054	0x82000054	Credit card entered is invalid // Confirm the card holder's name, credit card number, CVV code, expiration date and address you entered again.
	E-82000102	0x82000102	Issue adding funds to a child account // Child accounts have no wallet. Add your funds from the adult account linked to the child account. A family member or guardian can then set a spending limit to allow the child to make purchases.
	E-82000113	0x82000113	Cannot redeem the voucher code // Unable to verify voucher code, try again later. If the problem persists, contact PlayStation Support.
	E-8200012C	0x8200012C	Credit or debit card information is invalid // Step 1: Go to [Settings] > [PlayStation Network/Account Management] > [Account Information] > [Wallet] > [Payment Methods]. Select the card you are trying to use and select [Edit Card Information] to make sure that the details have been entered correctly. Step 2: Make sure the address information on your account is the same as the address registered to your card. Step 3: If this does not solve the issue, see our article on problems adding payment methods.
	E-8200012F	0x8200012F	Invalid voucher code (invalid or incorrect code) // The most common reasons for this error are: incorrect code, code has expired or not yet available, voucher region and PSN region don't match, or account does not meet voucher conditions. Make sure the code is entered correctly and check if the code's date is valid and also check for any restrictions of usage.
	E-82000130	0x82000130	Voucher code invalid or has not become available yet // Step 1: Make sure the code is entered correctly. Step 2: Check when the voucher becomes available and also if it has any restrictions of usage.
	E-82000133	0x82000133	Voucher code not yet active or has expired // Step 1: Make sure the code is entered correctly. Step 2: Check when the voucher becomes available and also if it has any restrictions of usage.
	E-82000134	0x82000134	Product or content is not available for your account's country/region (voucher is from the wrong country) // If attempting to redeem a PS Plus voucher, make sure the country flag on the voucher is from the same country as your account.
	E-82000138	0x82000138	Failed to add funds to wallet using a voucher or PSN card (wallet limit exceeded) // Try to redeem the code at a later date when your balance is lower.
	E-8200013A	0x8200013A	Connection to server failed // The PS4 was unable to connect to the server. Please try again later. Refer to PSN Status.
	E-82000156	0x82000156	Rate limit exceeded // For security reasons, there are limits on how many times and how fast you can enter credit card and voucher code information. Try again later.
	E-82000163	0x82000163	Home address registered on your PSN account does not match the address for your credit card, or an unexpected error occurred during server communication // Step 1: Make sure your PSN address is the same as the address on your credit card statement. Step 2: It is not currently possible to change your address via the PS4's PSN settings, so you'll need to use the web browser (PS4, PC, or mobile device) to change it via SonyEntertainmentNetwork.com. If this does not solve the problem, read this article on correcting billing errors. Step 3: If the error persists, the service may be temporarily unavailable. Try again later. You can check the status of the PSN here.
	E-82000168	0x82000168	Can't connect to the PSN (PSN temporarily down) // Access to the PSN is temporarily unavailable. Step 1: Check the network status here. Step 2: PSN may be experiencing high traffic. Try again later.
	E-82000171	0x82000171	Credit card on file is invalid // Make sure credit card details are entered correctly. Make sure that your account address matches the address on your credit card statement. If this does not solve your issue, please read this article on correcting billing errors.
	E-820001F7	0x820001F7	Could not connect to the server (HTTP 503 error) // Try again later or check the PSN status.
	E-82021054	0x82021054	Credit card entered is invalid // Confirm that the credit card information you have entered is correct.
	E-82021088	0x82021088	The credit card you have tried to register is already associated with your account // Step 1: Go to [Payment Methods] in PSS and confirm registered cards again. Step 2: If you have renewed a registered credit card, change the credit card details on file to reflect the new expiration date instead of adding a new card.
	E-82027201	0x82027201	Authentication failed // Try signing out of PSN and then back in a few times. If that doesn't work then check PSN status to ensure that there are no network problems that might prevent signing in. If problems continue then try again later as the server may be experiencing high volume.
	E-82027850	0x82027850	Credit or debit card information stored on PSN is invalid
	E-8210604A	0x8210604A	Error occurred with the payment (did not go through?) // Step 1: Check the credit/debit information registered to your account. Step 2: Re-register your credit/debit card. Step 3: Try with another credit/debit card. Step 4: This may be a temporary issue, try again later. Step 5: If a credit/debit card isn't required, consider topping up your wallet with a PSS card instead.
	E-8220400D	0x8220400D	An error has occurred
	E-82E0001C	0x82E0001C	The user has been banned or suspended. Please refer to this support article for more information on bans and suspensions.
	E-82E0001D	0x82E0001D	Access to Sony Entertainment Network from this PS4 has been banned or temporarily suspended
	E-82E01050	0x82E01050	The user has been banned or suspended. Please refer to this support article for more information on bans and suspensions.
	E-82E101F6	0x82E101F6	Connection to server failed // The PS4 was unable to connect to the server. Please try again later. Refer to PSN Status.
	E-82E101F7	0x82E101F7	PSN is undergoing maintenance // PSN is undergoing maintenance. Please try again later. You can check the status of the PSN here.
	E-82F001F8	0x82F001F8	Connection to server failed // The PS4 was unable to connect to the server. Please try again later. Refer to PSN Status.
	E-8F000001	0x8F000001	Purchase failed // Purchase the game directly from the PS Store, not from inside the game demo (e.g. Doki Doki Universe).
	E-FFFFFFFF	0xFFFFFFFF	System internal error // Update your system software to the latest version. If the error occurs again, please visit our Contact page to contact SCEA for additional technical support.
	E-8231CFB1	0x8231CFB1	Error related to Spotify App.

NP - PlayStation Network/Shop

Name	Errorcode	Returncode	Remarks
SCE_NP_ERROR_SIGNED_OUT	NP-31730-4	0x80550006	Error occurred while connecting to PSN // Step 1: Sign out of PSN, then back in. Step 2: Turn off the console and unplug it. Step 3: Wait 5 minutes, then plug the console back in and reboot it. If still having issues, try backing up all data and resetting the console.
SCE_NP_ERROR_USER_NOT_FOUND	NP-31731-5	0x80550007	User signed out of PSN or data on HDD is possibly corrupted // Step 1: Make sure you are signed into PSN. Step 2: Restart the PS4. Step 3: Enter Safe Mode and select [Restore Settings]. Step 4: Delete the user and re-create it. Step 5: If the error persists go to [Settings] > [Initialization] > [Initialize PS4] > [Quick] and initialize the system.
SCE_NP_ERROR_CALLBACK_ALREADY_REGISTERED	NP-31732-6	0x80550008	Already registered
SCE_NP_ERROR_CALLBACK_NOT_REGISTERED	NP-31733-7	0x80550009	Not registered
SCE_NP_ERROR_NOT_SIGNED_UP	NP-31734-8	0x8055000A	Called in the not signed-up state
SCE_NP_ERROR_AGE_RESTRICTION	NP-31735-9	0x8055000B	Cannot play this feature because of the age restriction // Check the age restriction of the application and make sure the age associated with your account is old enough to play the title.
SCE_NP_ERROR_LOGOUT	NP-31736-0	0x8055000C	Application is trying to connect to a user that has logged out // Step 1: Confirm that all users are logged in on the console and restart the application. Step 2: If the error persists, reboot the console.
SCE_NP_ERROR_LATEST_SYSTEM_SOFTWARE_EXIST	NP-31737-1	0x8055000D	A new version system software update file exists
SCE_NP_ERROR_LATEST_SYSTEM_SOFTWARE_EXIST_FOR_TITLE	NP-31738-2	0x8055000E	A new version system software update file exists
SCE_NP_ERROR_LATEST_PATCH_PKG_EXIST	NP-31739-3	0x8055000F	Download of latest update file is still ongoing. You need to install this update file to use the feature // Wait for the download to complete, then close the application to install the update.
SCE_NP_ERROR_LATEST_PATCH_PKG_DOWNLOADED	NP-31740-5	0x80550010	A new version downloaded update file exists
SCE_NP_ERROR_INVALID_SIZE	NP-31741-6	0x80550011	Invalid size
SCE_NP_AUTH_ERROR_CONSOLE_ID_SUSPENDED	NP-31765-2	0x80550427	Use of the client console is temporarily suspended - (Console ID suspended)
SCE_NP_AUTH_ERROR_ACCOUNT_CLOSED	NP-31766-3	0x80550430	Account closed
SCE_NP_AUTH_ERROR_ACCOUNT_SUSPENDED	NP-31767-4	0x80550431	Account suspended
	NP-31801-3		Error occurred when using PSN functions // Step 1: Close and restart the application. Step 2: If the error persists, check if an update is available for the application.
SCE_NP_COMMUNITY_SERVER_ERROR_PLAYER_BANNED	NP-31831-6	0x8055080A	User is banned
	NP-31866-4		Issue with saved data in online storage // Step 1: Sign in to PlayStation Store, select your avatar, open Subscriptions Management, and check that you're subscribed to PlayStation Plus. You need to be subscribed to PlayStation Plus to use online storage. Step 2: Reboot the console. Step 3: Make sure that your online storage data doesn't exceed 100GB. Step 3: Make sure that the number of saved data files in your online storage doesn't exceed 1000. Step 4: Go to [Settings] > [Account Management] and sign out from PSN. Then sign in again. Step 5: Go to [Settings] > [Account Management] and select [Activate as Your Primary PS4].
	NP-31928-3		Could not connect to the network // Reboot the router and set up PS4 connection using the 'Easy' settings. You may need to wait a couple of minutes for the router to fully restart. If the problem persists see the PlayStation Repairs tool for more troubleshooting steps.
	NP-31950-8		Issue connecting to the PSN (timed out during sign-in process) // PSN Error // Step 1: PSN may be temporarily unavailable or undergoing maintenance. You can check the status of the PSN here. Step 2: Perform an internet connection test to make sure you can connect to the network. Step 3: If still unable to connect, try resetting your local internet connection by turning off the modem or router for 5 minutes before turning it back on. Step 4: If this didn't help, the router's firmware may need to be updated. Contact your ISP or router manufacturer for assistance if required. If still experiencing difficulties then try again later as the server may be experiencing high traffic.
SCE_NP_MATCHING2_ERROR_TIMEDOUT	NP-31952-0	0x80550C36	Network connection has timed out (unstable or stressed network connection) // The network connection may be unstable. Check your console connection by going to [Settings] > [Network] > [Test Internet Connection]. If using a Wi-Fi connection, move the PS4 and router closer together, and make sure there are no obstructions between them. Other devices on your network may be using a large bandwidth. Wait until these finish before trying again.
SCE_NP_MATCHING2_SERVER_ERROR_PLAYER_BANNED	NP-31962-1	0x80550D06	User banned
	NP-31971-1		Failed to connect to PSN (problem connecting to the server) // Step 1: Check PSN status to see if there are network issues. Step 2: Reboot the console. Step 3: Turn off the router for at least 5 minutes, then turn it back on. Step 4: This may be a temporary issue. Try again after a while.
	NP-31975-5		Failed to connect to PSN (problem connecting to the server) // Step 1: Check PSN status to see if there are network issues. Step 2: Reboot the console. Step 3: Turn off the router for at least 5 minutes, then turn it back on. Step 4: This may be a temporary issue. Try again after a while.
	NP-31980-1		Session full // Try joining a different session.
SCE_NP_MATCHING2_SERVER_ERROR_CONSOLE_BANNED	NP-31987-8	0x80550D28	Console banned
	NP-32062-3		Data on the console may be corrupted // Step 1: Shut down the PS4, reboot in Safe Mode and select [5. Rebuild Database]. Step 2: If the error persists, back up all data and initialize the PS4 at [Settings] > [Initialization] > [Initialize PS4] > [Full].
	NP-32091-5		Trophy data is corrupted // Step 1: Back up the save data using USB device or PS+ online storage, and then go to [Settings] > [Initialization] > [Initialize PS4] and try the PS4 initialization. Step 2: Transfer the saved data back to PS4 and retry the Trophy sync.
	NP-32157-8		Trophy error // Step 1: Try syncing trophies manually at [Trophies] > [Options] > [Sync Trophies with PSN]. Step 2: Close the application and restart the system. Step 3: If the error occurs again, back up saved data. Delete the user at [Settings] > [Initialization] > [Delete User]. Create a new user and restore the data. Step 4: If the error still occurs after trying the previous three steps, back up save data and initialize the system.
	NP-32167-9		Error connecting to the server (connection failed due to an unstable network connection) // Step 1: Check PSN status to see if there are any network issues. Step 2: Reboot the console. Step 3: Turn off your router for at least 5 minutes, then turn it back on. Step 4: There may be temporary network congestion. Try again after a while.
SCE_NP_WEBAPI_ERROR_NOT_SIGNED_IN	NP-32222-1	0x80552907	Called API which requires user to be signed in when not be signed in. You can check the status of the PSN here.
	NP-32224-3	0x80552909	Failed to connect to PSN (issue connecting to the server) // Step 1: Check PSN status to see if there are network issues. Step 2: Reboot the console. Step 3: Turn off the router for at least 5 minutes, then turn it back on. Step 4: This may be a temporary issue. Try again after a while.
SCE_NP_AUTH_SERVER_ERROR_OBSOLETE_11	NP-32244-5	0x80552A11	Account suspended - obsolete error code
SCE_NP_AUTH_SERVER_ERROR_OBSOLETE_12	NP-32245-6	0x80552A18	Console suspended - obsolete error code
SCE_NP_AUTH_SERVER_ERROR_OBSOLETE_18	NP-32251-3	0x80552A18	Account closed - obsolete error code
	NP-32370-5		This user is already registered // The user may already be registered on your console: Check the currently registered users from [Settings] > [Login Settings] > [User Management]. Try creating a new user from [User Management].
	NP-32470-6		Failed to connect to PSN (issue connecting to the server) // Step 1: Reboot the console. Step 2: Turn off the router for at least 5 minutes, then turn it back on. Step 3: Try connecting via a wired (ethernet) connection if possible. Step 4: Make sure your router's firmware is up to date. Step 5: Try again after a while (temporary issue).
	NP-33318-8		The Share Play connection was lost because the network connection became unstable // To get the best experience from Share Play, you and your friend will need a high-speed Internet connection. The surrounding conditions of the home network of each player may also effect the connection. As a guide, a minimum connection speed of 2 Mbps is recommended. To check your upload speed, check with your network service provider. It is recommended to use a LAN cable (wired connection) to connect your PS4 to the network. If using a Wi-Fi connection, try moving the PS4 and router closer together, and remove any obstructions between them. Check if other devices on your network are using a large amount of bandwidth. Wait until these finish. Check the connection status of the PS4 in [Settings] > [Network] > [Test Internet Connection].
	NP-34388-6		Failed to register an account (server issue) // The account cannot be registered due to a server issue: Step 1: Check PSN status to see if there are any network issues. Step 2: Turn off your router for at least 5 minutes, then turn it back on. Step 3: This may be a temporary issue. Try again after a while.
	NP-34846-5		Trophy error // Step 1: Close the application and restart the system. Step 2: If the error occurs again, back up your saved data, and then go to [Settings] > [Initialization] and choose [Initialize PS4].
	NP-34924-2		Cannot check the latest update for this application. The network connection may be unstable // Step 1: Check Internet connection: Reboot the console. Reset your local internet connection by turning off the modem or router for 5 minutes before turning it back on. Update your router's firmware. Contact your ISP or router manufacturer for assistance if required. If using a Wi-Fi connection, move the PS4 and router closer together, and remove any obstructions between them. If you have been using a specific DNS server, change DNS settings. Step 2: On the Home Screen, press the OPTIONS button on your controller when highlighting the application on the Home Screen and select [Check for Update]. Step 3: If still experiencing difficulties then try again later as the server may be experiencing high traffic.
SCE_NP_COMMUNITY_SERVER_ERROR_SAVEDATA_UPDATED	NP-34926-4	0x8055088A	Since the save data of the same title was uploaded to PS plus's cloud save from two or more hardware, the latter became an error by the conflict. // You will see a message that says "Saved data with the same name was uploaded from another PS4. Do you want to overwrite this saved data?" Choose [Yes] to overwrite the data and upload your saved data.
	NP-34937-6		Trophy data is corrupted // Step 1: Back up the save data using USB device or PS+ online storage, and then go to [Settings] > [Initialization] > [Initialize PS4] and try the PS4 initialization. Step 2: Go to [Settings] > [Users] and delete the user. Step 3: Recreate the user and sign in. Transfer the saved data back to PS4 and retry the Trophy sync.
	NP-34957-8		Problem connecting to the server // Step 1: Check the PSN status page for any server issues. Step 2: If possible, try connecting to the internet using a wired (ethernet) connection. Step 3: Turn off the console and unplug it. Step 4: Turn off the router/modem for at least 5 minutes, then restart it. Step 5: Plug the console back in and reboot it.
	NP-34993-8		Cannot connect to the server (PSN or game server is down) // PSN or the game server is temporarily unavailable. Try again later.
	NP-34994-9		An error has occurred in the Party application // Close the Party and reboot the console.
	NP-35000-8		PSN is undergoing maintenance // Try again later.
	NP-36000-5		Trophy data may be corrupted // PSN error // Step 1: Back up the save data using USB device or PS+ online storage, and then go to [Settings] > [Initialization] > [Initialize PS4] and try the PS4 initialization. Step 2: Go to [Settings] > [Users] and delete the user. Step 3: Recreate the user and sign in. Transfer the saved data back to PS4 and retry the Trophy sync.
	NP-36006-5		Trophy data may be corrupted // Step 1: Back up the save data using a USB device. Step 2: Delete your local user. Step 3: Make a new local local user and sign into your PSN account. Step 4: If still seeing the error, try rebooting in safe mode option 6. Step 5: If option 6 does not work, try safe mode option 7.
	NP-36147-1		Cannot connect to server (HTTP response error) // Step 1: Restart the PS4. Step 2: Sign out of PSN, then back in. Step 3: If the error persists then try again later as PSN may be experiencing high traffic.
	NP-36668-8		Cannot join Share Play because the network connection speed is poor, or the network connection is unstable // To get the best experience from Share Play, you and your friend will need a high-speed Internet connection. The surrounding conditions of the home network of each player may also effect the connection. As a guide, a minimum connection speed of 2 Mbps is recommended. To check your upload speed, check with your network service provider.
	NP-37521-8		Error occurred when connecting to the server on your console // There may be an ongoing server issue. Retry after a while.
	NP-37602-8		Error occurred when linking accounts (issue with linking with other services) // Step 1: Check the status page of each service to see if there are network issues. Step 2: Reboot the console. Step 3: Unlink the account and link it again from [Settings] > [Account Management] > [Link with Other Services]. Step 4: Turn off your router for at least 5 minutes, then turn it back on. Step 5: If you have another account that can be linked with PSN, check to see if that account can be linked without any issues.
	NP-37637-6		Install the latest System Software // Go to the function screen and select [Settings] > [System Software Update] to download the latest version of the system software.
	NP-37665-7		Application error (PSN down, connection issues, or network congestion) // Step 1: Check PSN status to see if there are any network issues. Step 2: Reboot the console. Step 3: Turn off your router for at least 5 minutes, then turn it back on. Step 4: There may be temporary network congestion. Try again after a while.
	NP-37667-9		Share Play connection lost because the network connection became unstable // To get the best experience from Share Play, you and your friend will need a high-speed Internet connection. The surrounding conditions of the home network of each player may also effect the connection. As a guide, a minimum connection speed of 2 Mbps is recommended. To check your upload speed, check with your network service provider. Hints for improving your network connection: It is recommended to use a LAN cable (wired connection) to connect your console to the network. If using a Wi-Fi connection, place the PS4 and router closer together, and make sure there are no obstructions between them. Other devices on your network might be using a large amount of bandwidth. Wait until they are finished. Check the connection status of the PS4 in [Settings] > [Network] > [Test Internet Connection].
	NP-37668-0		Share Play not available due to the network connection quality // To get the best experience from Share Play, you and your friend will need a high-speed Internet connection. As a guide, a minimum connection speed of 2 Mbps is recommended. Check with your ISP to find out your upload speed. Hints for improving your network connection: It is recommended to use a LAN cable (wired connection) to connect your console to the network. If using a Wi-Fi connection, try moving the PS4 and router closer together, and make sure there are no obstructions between them. Other devices on your network might be using a large amount of bandwidth. Wait until they are finished before trying again. Check the connection status of the PS4 in [Settings] > [Network] > [Test Internet Connection].
	NP-37680-4		Credit card on file is invalid (credit/debit card info stored on account is invalid) // Step 1: Make sure your credit card details are entered correctly. Step 2: Make sure your account address is the same as the address on your credit card statement. Step 3: If this does not solve the problem, read our article on correcting billing errors.
	NP-38496-0		Share Play can't be started because your upload speed is lower than 2 Mbps // To get the best experience from Share Play, you and your friend will need a high-speed Internet connection of at least 2 Mbps. Step 1: If possible, try using a LAN cable (wired connection) to connect your PS4 to the network. Step 2: If using a Wi-Fi connection, try placing the PS4 and router closer together, and make sure there are no obstructions between them. Step 3: Check if other devices on your network are using a large amount of bandwidth. Wait until they are finished. Step 4: Go to [Party] > [Party Settings] > [Video Quality] and set [Resolution] and [Frame Rate] as [Standard]. You will need a high-speed internet connection to use Share Play with [High] settings. To check your connection, go to [Settings] > [Network] > [Test Internet Connection].
	NP-38497-1		Share Play having network issues (network speed too slow) // To get the best experience from Share Play, you and your friend will need a high-speed Internet connection of at least 2 Mbps. To check the connection status of your console, go to [Settings] > [Network] > [Test Internet Connection]. Try the following to improve your connection: 1) If possible, try using a LAN cable (wired connection) to connect your PS4 to the network. If using a Wi-Fi connection, try to place the PS4 and router closer together, and make sure there are no obstructions between them. Step 2: Check if other devices on your network are using a large amount of bandwidth. Wait until they are finished before trying again. Step 3: Go to [Party] > [Party Settings] > [Video Quality] and make sure to set [Resolution] and [Frame Rate] as [Standard]. You will need a high-speed internet connection to use Share Play in [High].
	NP-38551-2		You may have activated a primary PS4 console too many times in a short period // If this error occurred after selecting [Activate as Your Primary PS4] multiple times, try again after a while. If the error appeared after selecting [Activate as Your Primary PS4] once: 1) Reboot the console. 2) If the system software is not up to date, update it to the latest version. 3) Turn off your router for at least 5 minutes, then turn it back on. 4) This may be a temporary issue. Try again after a while.
	NP-39225-1		Issue with PS4 internet connection // Step 1: Check PSN status at Playstation.com and the game server status at their website. Step 2: If the server is active and still getting this error, go to [Settings] > [Network] > [Test Internet Connection] and then check your connection status. Step 3: Adjust network settings: Update router firmware or try later as the network may be temporarily busy.
	NP-39226-2		Issue connecting to the PSN
	NP-40833-8		Error connecting to the server // Step 1: Check PSN status to see if there are network issues. Step 2: If using a wireless connection, try moving the console closer to the router and remove anything interrupting the connection between the devices. Step 3: Perform an Internet connection test from Network settings. Step 4: Turn off your router for a least 5 minutes, then turn it back on. Step 5: Try connecting via a wired (ethernet) connection if possible. Step 6: Update your router to the latest firmware. For details on how to update, contact the manufacturer. Step 7: If possible, try opening the ports. TCP: 80, 443, 3478, 3479, 3480. UDP: 3478, 3479, 49152 to 65535. For details on how to open ports, contact your ISP.
	NP-41772-1		Error occurred while activating a primary PS4 console (another console already registered as primary console) // To change your primary PS4 console, you need to deactivate your current primary PS4 console. Step 1: On your primary PS4 console, go to [Settings] > [Account Management] > [Activate as Your Primary PS4]. Step 2: Select [Deactivate] > [Yes]. You can now activate a new primary PS4 console. If you can't access your primary PS4 console, it's still possible to deactivate (and sign out of) all devices attached to your account. Please note, you can only deactivate your consoles once every six months. Sign in to Account Management. Select [Device Management] > [PlayStation Consoles] > [Deactivate All Devices].
	NP-46042-6		Some of the information entered was incorrect (password issue?) // Try entering the information again. If the problem persists, recover your account (reset the password).

error has occurred (np-39232-9)

NW - NetWork

Name	Errorcode	Returncode	Remarks
SCE_NET_ERROR_EPERM	NW-31141-0	0x80410101	Internal error
SCE_NET_ERROR_ENOENT	NW-31142-1	0x80410102	No resources are in wait state
SCE_NET_ERROR_ESRCH	NW-31143-2	0x80410103	Internal error
SCE_NET_ERROR_EINTR	NW-31144-3	0x80410104	Blocking canceled by abort function / An error has occured
SCE_NET_ERROR_EIO	NW-31145-4	0x80410105	Internal error
SCE_NET_ERROR_ENXIO	NW-31146-5	0x80410106	Internal error
SCE_NET_ERROR_E2BIG	NW-31147-6	0x80410107	Internal error
SCE_NET_ERROR_ENOEXEC	NW-31148-7	0x80410108	Internal error
SCE_NET_ERROR_EBADF	NW-31149-8	0x80410109	Invalid libnet ID specified
SCE_NET_ERROR_ECHILD	NW-31150-0	0x8041010A	Internal error
SCE_NET_ERROR_EDEADLK	NW-31151-1	0x8041010B	Internal error
SCE_NET_ERROR_ENOMEM	NW-31152-2	0x8041010C	Insufficient memory (kernel)
SCE_NET_ERROR_EACCES	NW-31153-3	0x8041010D	Attempted to use an area reserved by the system
SCE_NET_ERROR_EFAULT	NW-31154-4	0x8041010E	Invalid argument specified
SCE_NET_ERROR_ENOTBLK	NW-31155-5	0x8041010F	Abort process called while target is not in wait state
SCE_NET_ERROR_EBUSY	NW-31156-6	0x80410110	libnet already initialized
SCE_NET_ERROR_EEXIST	NW-31157-7	0x80410111	SCE_NET_EPOLL_CTL_ADD specified to previously associated Net library ID
SCE_NET_ERROR_EXDEV	NW-31158-8	0x80410112	Internal error
SCE_NET_ERROR_ENODEV	NW-31159-9	0x80410113	Target device does not exist
SCE_NET_ERROR_ENOTDIR	NW-31160-1	0x80410114	Internal error
SCE_NET_ERROR_EISDIR	NW-31161-2	0x80410115	Internal error
SCE_NET_ERROR_EINVAL	NW-31162-3	0x80410116	Invalid argument specified // Undefined error // Restart the PS4 system.
SCE_NET_ERROR_ENFILE	NW-31163-4	0x80410117	Insufficient space in socket table
SCE_NET_ERROR_EMFILE	NW-31164-5	0x80410118	Internal error
SCE_NET_ERROR_ENOTTY	NW-31165-6	0x80410119	Internal error
SCE_NET_ERROR_ETXTBSY	NW-31166-7	0x8041011A	Internal error
SCE_NET_ERROR_EFBIG	NW-31167-8	0x8041011B	Internal error
SCE_NET_ERROR_ENOSPC	NW-31168-9	0x8041011C	Size specified with dst is too small to store string
SCE_NET_ERROR_ESPIPE	NW-31169-0	0x8041011D	Internal error
SCE_NET_ERROR_EROFS	NW-31170-2	0x8041011E	Internal error
SCE_NET_ERROR_EMLINK	NW-31171-3	0x8041011F	Internal error
SCE_NET_ERROR_EPIPE	NW-31172-4	0x80410120	Writing side of socket already closed / Internet connection lost // Step 1: Check PSN status to see if there are any issues. Step 2: Go to [Settings] > [Network] > [Test Internet Connection]. Review and configure your connection settings again if necessary. Step 3: Turn off your router for at 5 minutes, then turn it back on. Step 4: Try a wired connection if possible. Step 5: Try again later (temporary issue).
SCE_NET_ERROR_EDOM	NW-31173-5	0x80410121	Internal error
SCE_NET_ERROR_ERANGE	NW-31174-6	0x80410122	Internal error
SCE_NET_ERROR_EAGAIN	NW-31175-7	0x80410123	Socket is in blocking state (when non-blocking) / Error connecting to network (issue connecting to server) // Step 1: Reboot the console. Step 2: Turn off your router, wait at least 5 minutes, then restart it. Step 3: Try using a wired connection if possible. Step 4: Try changing DNS settings. Configure your network settings with the number of a public DNS that is free and open to the public by companies or organizations (e.g Google). Step 5: Try again later (temporary issue).
SCE_NET_ERROR_EWOULDBLOCK	NW-31175-7	0x80410123	same as SCE_NET_ERROR_EAGAIN
SCE_NET_ERROR_EINPROGRESS	NW-31176-8	0x80410124	Attempting to establish a connection
SCE_NET_ERROR_EALREADY	NW-31177-9	0x80410125	Socket is already in use
SCE_NET_ERROR_ENOTSOCK	NW-31178-0	0x80410126	Internal error
SCE_NET_ERROR_EDESTADDRREQ	NW-31179-1	0x80410127	Invalid send request (NetSendto() should be used)
SCE_NET_ERROR_EMSGSIZE	NW-31180-3	0x80410128	Message size is too large
SCE_NET_ERROR_EPROTOTYPE	NW-31181-4	0x80410129	Unsupported protocol type was specified
SCE_NET_ERROR_ENOPROTOOPT	NW-31182-5	0x8041012A	Option is not supported
SCE_NET_ERROR_EPROTONOSUPPORT	NW-31183-6	0x8041012B	Invalid protocol family
SCE_NET_ERROR_ESOCKTNOSUPPORT	NW-31184-7	0x8041012C	Internal error
SCE_NET_ERROR_ENOTSUP	NW-31185-8	0x8041012D	Invalid call for that socket
SCE_NET_ERROR_EOPNOTSUPP	NW-31185-8	0x8041012D	Invalid call for that socket
SCE_NET_ERROR_EPFNOSUPPORT	NW-31186-9	0x8041012E	Unsupported protocol family was specified
SCE_NET_ERROR_EAFNOSUPPORT	NW-31187-0	0x8041012F	Value of specified address family is not supported by socket protocol family
SCE_NET_ERROR_EADDRINUSE	NW-31188-1	0x80410130	Attempted to bind to bound port
SCE_NET_ERROR_EADDRNOTAVAIL	NW-31189-2	0x80410131	Invalid address specified
SCE_NET_ERROR_ENETDOWN	NW-31190-4	0x80410132	Interface is down
SCE_NET_ERROR_ENETUNREACH	NW-31191-5	0x80410133	Destination is unreachable
SCE_NET_ERROR_ENETRESET	NW-31192-6	0x80410134	Internal error
SCE_NET_ERROR_ECONNABORTED	NW-31193-7	0x80410135	Connection was aborted
SCE_NET_ERROR_ECONNRESET	NW-31194-8	0x80410136	Issue with PS4 internet connection // Step 1: Check PSN status and game server status on their website. Step 2: If the server is active and still getting this error, go to [Settings] > [Network] > [Test Internet Connection] and check your Internet connection status. Step 3: Adjust your network settings: Update router to the latest firmware. Try again later as the network may be temporarily busy.
SCE_NET_ERROR_ENOBUFS	NW-31195-9	0x80410137	Memory limited
SCE_NET_ERROR_EISCONN	NW-31196-0	0x80410138	Specified connection is already established
SCE_NET_ERROR_ENOTCONN	NW-31197-1	0x80410139	Specified connection does not exist
SCE_NET_ERROR_ESHUTDOWN	NW-31198-2	0x8041013A	Shutdown in progress
SCE_NET_ERROR_ETOOMANYREFS	NW-31199-3	0x8041013B	Too many multicast addresses specified
SCE_NET_ERROR_ETIMEDOUT	NW-31200-6	0x8041013C	Timeout occurred (indicates a protocol timeout, unlike SCE_NET_EAGAIN) // Failed to update the system software due to connection error // Step 1: If you have access to a PC, follow these instructions to update your system software using a USB device. Step 2: If you don't have access to a PC, try Internet connection test at [Settings] > [Network] > [Test Internet Connection] and make sure you can connect to the network. Step 3: If you are able to connect, retry updating at [Settings] > [System Software Update]. Step 4: If you're unable to connect, the network may be experiencing issues. You can check the status of the PSN here. Turn off other devices that are connected to your network to reduce stress and try the update again.
SCE_NET_ERROR_ECONNREFUSED	NW-31201-7	0x8041013D	Could not connect to the network // 1) PSN or the game server may be temporarily unavailable. Check the status of the game's server via its website. 2) If the servers are active, perform an Internet connection test at [Settings] > [Network] > [Test Internet Connection] and make sure that you can connect to the network. 3) Update your router to the latest firmware. If possible, reduce stress on your network by disconnecting any other device that are connected. If this does not work, try again later as the server may be experiencing high volume.
SCE_NET_ERROR_ELOOP	NW-31202-8	0x8041013E	Internal error
SCE_NET_ERROR_ENAMETOOLONG	NW-31203-9	0x8041013F	Internal error
SCE_NET_ERROR_EHOSTDOWN	NW-31204-0	0x80410140	Error connecting to network // Step 1: Perform an Internet connection test by selecting [Settings] > [Network] > [Test Internet Connection]. Step 2: If using a wireless connection, try moving the console closer to your router and removing any obstructions between them. Step 3: Turn off your router for at least 5 minutes, then turn it back on. Step 4: Try using a wired connection if possible. Step 5: Update your router to the latest firmware (contact your router manufacturer or ISP for assistance if required). Step 6: If possible, try opening the ports. TCP: 80, 443, 3478, 3479, 3480 and UDP: 3478, 3479, 49152 to 65535.
SCE_NET_ERROR_EHOSTUNREACH	NW-31205-1	0x80410141	Network connection is unstable or too weak to reach the PSN server // 1) Check the connection status of the PS4 in [Settings] > [Network] > [Test Internet Connection]. 2) Try the following: Other devices on your network might be using a large amount of bandwidth. Wait until these finish. Check that the modem and router supports the PS4 (contact your ISP for details). Reset your local network connection by powering off your modem or router and waiting 5 minutes before turning it back on. Update your router to the latest firmware. Contact your router manufacturer or ISP for assistance if required. If using a Wi-Fi connection, move the PS4 and router closer together, and remove any obstructions between them. 3) Make sure the following port numbers are not blocked by the router: TCP: 80, 443, 3478, 3479, 3480; UDP: 3478, 3479. 4) If you have been using a specific DNS server, go to [Settings] > [Network] > [Set Up Internet Connection] > [Custom] and change the DNS settings. 5) If still experiencing difficulties then try again later as the server may be experiencing high traffic.
SCE_NET_ERROR_ENOTEMPTY	NW-31206-2	0x80410142	Internal error
SCE_NET_ERROR_EPROCLIM	NW-31207-3	0x80410143	Could not connect to the network // PSN or the game's server may be temporarily unavailable. Please check the status of the game's server via its website. You can check the status of the PSN here. Step 2: If the serves are active, perform a connection test at [Settings] > [Network] > [Test Internet Connection] and make sure you can connect to the network. Step 3: Update router to the latest firmware. If possible, reduce stress on your network by disconnecting any other devices that are connected. If this does not work, try again later as the server may be experiencing high volume.
SCE_NET_ERROR_EUSERS	NW-31208-4	0x80410144	Internal error
SCE_NET_ERROR_EDQUOT	NW-31209-5	0x80410145	Internal error
SCE_NET_ERROR_ESTALE	NW-31210-7	0x80410146	Internal error
SCE_NET_ERROR_EREMOTE	NW-31211-8	0x80410147	Internal error
SCE_NET_ERROR_EBADRPC	NW-31212-9	0x80410148	Internal error
SCE_NET_ERROR_ERPCMISMATCH	NW-31213-0	0x80410149	Internal error
SCE_NET_ERROR_EPROGUNAVAIL	NW-31214-1	0x8041014A	Internal error
SCE_NET_ERROR_EPROGMISMATCH	NW-31215-2	0x8041014B	Internal error
SCE_NET_ERROR_EPROCUNAVAIL	NW-31216-3	0x8041014C	Internal error
SCE_NET_ERROR_ENOLCK	NW-31217-4	0x8041014D	Internal error
SCE_NET_ERROR_ENOSYS	NW-31218-5	0x8041014E	Internal error
SCE_NET_ERROR_EFTYPE	NW-31219-6	0x8041014F	Internal error
SCE_NET_ERROR_EAUTH	NW-31220-8	0x80410150	Internal error
SCE_NET_ERROR_ENEEDAUTH	NW-31221-9	0x80410151	Internal error
SCE_NET_ERROR_EIDRM	NW-31222-0	0x80410152	Internal error
SCE_NET_ERROR_ENOMS	NW-31223-1	0x80410153	Internal error
SCE_NET_ERROR_EOVERFLOW	NW-31224-2	0x80410154	Internal error
SCE_NET_ERROR_ECANCELED	NW-31225-3	0x80410155	Termination process of Net library ID in use was executed
SCE_NET_ERROR_EADHOC	NW-31226-4	0x804101A0	UDP or TCP was attempted in the ad hoc communication mode
SCE_NET_ERROR_ERESERVED161	NW-31227-5	0x804101A1	Internal error
SCE_NET_ERROR_ERESERVED162	NW-31228-6	0x804101A2	Internal error
SCE_NET_ERROR_EINACTIVEDISABLED	NW-31229-7	0x804101A3	Error connecting to the network (issue connecting to PSN) // Step 1: Check PSN status to see if there any issues. Step 2: Reboot the console. Step 3: Perform an Internet connection test by selecting [Settings] > [Network] > [Test Internet Connection]. Review and configure your connection settings again if necessary. Step 4: Turn off your router for at 5 minutes, then turn it back on. Step 5: This may be a temporary issue. Try again later.
SCE_NET_ERROR_ENODATA	NW-31230-9	0x804101A4	Internal error
SCE_NET_ERROR_EDESC	NW-31231-0	0x804101A5	Internal error
SCE_NET_ERROR_EDESCTIMEDOUT	NW-31232-1	0x804101A6	Internal error
SCE_NET_ERROR_ENETINTR	NW-31233-2	0x804101A7	Internal error
SCE_NET_ERROR_ENOTINIT	NW-31234-3	0x804101C8	libnet not initialized
SCE_NET_ERROR_ENOLIBMEM	NW-31235-4	0x804101C9	Insufficient memory (library)
SCE_NET_ERROR_ERESERVED202	NW-31236-5	0x804101CA	Internal error
SCE_NET_ERROR_ECALLBACK	NW-31237-6	0x804101CB	Internal error
SCE_NET_ERROR_EINTERNAL	NW-31238-7	0x804101CC	Internal error
SCE_NET_ERROR_ERETURN	NW-31239-8	0x804101CD	libnetctl error was returned
SCE_NET_ERROR_ENOALLOCMEM	NW-31240-0	0x804101CE	Insufficient memory (library)
SCE_NET_ERROR_RESOLVER_EINTERNAL	NW-31241-1	0x804101DC	Internal error
SCE_NET_ERROR_RESOLVER_EBUSY	NW-31242-2	0x804101DD	Resolver was in use
SCE_NET_ERROR_RESOLVER_ENOSPACE	NW-31243-3	0x804101DE	Insufficient memory (library)
SCE_NET_ERROR_RESOLVER_EPACKET	NW-31244-4	0x804101DF	Invalid DNS settings
SCE_NET_ERROR_RESOLVER_ERESERVED224	NW-31245-5	0x804101E0	Internal error
SCE_NET_ERROR_RESOLVER_ENODNS	NW-31246-6	0x804101E1	DNS settings are invalid // Step 1: Reboot the PS4 to refresh the network connection. Step 2: Go to [Settings] > [Network] > [Test Internet Connection]. Step 3: If you selected [Manual] under [IP Address Settings] or [DNS Settings] when you set the Internet connection for your PS4, make sure that [Primary DNS] and [Secondary DNS] are set correctly. In other cases, the PS4 might not have obtained an IP address, or the DNS settings may have been changed. Contact your ISP for further assistance.
SCE_NET_ERROR_RESOLVER_ETIMEDOUT	NW-31247-7	0x804101E2	Network connection has timed out (network connection unstable or too weak) // Step 1: If using a Wi-Fi connection, move the PS4 and router closer together, and remove any obstructions between them. Step 2: Other devices on your network may be using a large amount of bandwidth. Wait until these finish. Step 3: Check the connection status of the console in [Settings] > [Network] > [Test Internet Connection].
SCE_NET_ERROR_RESOLVER_ENOSUPPORT	NW-31248-8	0x804101E3	Unsupported function requested by server
SCE_NET_ERROR_RESOLVER_EFORMAT	NW-31249-9	0x804101E4	Invalid response from server
SCE_NET_ERROR_RESOLVER_ESERVERFAILURE	NW-31250-1	0x804101E5	Internal server error. An error has occurred when connecting to the server // Step 1: Reboot the console. Step 2: If you still see this error, there could be a server issue. Try again later.
SCE_NET_ERROR_RESOLVER_ENOHOST	NW-31251-2	0x804101E6	Error connecting to network // Step 1: Reboot console. Step 2: Perform an Internet connection test by selecting [Settings] > [Network] > [Test Internet Connection]. Step 3: Try connecting via a wired connection if possible. Step 4: Turn off your router for at least 5 minutes, then turn it back on. Step 5: Try again later (temporary issue).
SCE_NET_ERROR_RESOLVER_ENOTIMPLEMENTED	NW-31252-3	0x804101E7	Inquired function is not implemented
SCE_NET_ERROR_RESOLVER_ESERVERREFUSED	NW-31253-4	0x804101E8	A network error occurred. Response from DNS server is delayed or unstable // Step 1: Reboot the console and router. Step 2: Check if your ISP is carrying out any maintenance on their network. Step 3: The following port numbers are used by the PSN servers to connect to the Internet. Make sure they are not blocked by your router: TCP: 80, 443, 3478, 3479, 3480. UDP: 3478, 3479. Step 4: If you have been using a specific DNS server, go to [Settings] > [Network] > [Set up Network Connection] > [Custom] and change the DNS settings.
SCE_NET_ERROR_RESOLVER_ENORECORD	NW-31254-5	0x804101E9	Inquired record does not exist / A network error occurred. Response from the DNS server is delayed or unstable // Step 1: Reboot the console and router to refresh the network connection. Step 2: Go to [Settings] > [Network] > [Test Internet Connection] to test the connection status. Step 3: If you selected [Manual] under [IP Address Settings] or [DNS Settings] when you set the Internet connection for your PS4, make sure that [Primary DNS] and [Secondary DNS] are set correctly. In some cases, the console might not have obtained an IP address yet, or any settings with DNS may have been changed. Contact your ISP for further assistance.
SCE_NET_ERROR_RESOLVER_EALIGNMENT	NW-31255-6	0x804101EA	Invalid alignment
	NW-31291-6		Cannot connect to a Wi-Fi network. Wi-Fi signal strength may be too weak // Perform a connection test by going to [Settings] > [Network] > [Test Internet Connection]. Reset your local network connection by powering off your modem/router and waiting 5 minutes before turning it back on. Move the console and router closer together and remove any obstructions between them.
	NW-31294-9		Connection timed out as the wireless connection experiencing instability (issue connecting to local network) // Step 1: Perform a connection test by going to [Settings] > [Network] > [Test Internet Connection] to confirm you can connect to the internet. Step 2: Turn off router/modem for 5 minutes before attempting to connect again. Update router firmware (for assistance contact your router manufacturer or ISP). Turn off other devices connected to your network. Step 3: If possible, try connecting to another network.
	NW-31295-0		Cannot connect to a Wi-Fi network. Wi-Fi signal strength may be too weak // Run an Internet connection test on the console by going to [Settings] > [Network] > [Test Internet Connection]. Reset your local network connection by powering off your modem/router and waiting 5 minutes before turning it back on. Move the PS4 and router closer together and remove any obstructions between them.
	NW-31297-2		Unable to connect to wireless network (incorrect Wi-Fi password on console or wireless network is busy) // Go to [Settings] > [Network] > [Set up Network Connection] to configure the network settings again. If the error only occurs in a limited period of time, the wireless network may be busy and preventing the connection. Try disconnecting other devices from the wireless network and retry the connection test at [Settings] > [Network] > [Test Internet Connection]. If you cannot disconnect other devices from the wireless network, try the connection test on the console later.
SCE_NET_CTL_ERROR_NOT_INITIALIZED	NW-31302-9	0x80412101	NetCtl library not initialized.
SCE_NET_CTL_ERROR_CALLBACK_MAX	NW-31303-0	0x80412103	Over maximum number of callback registered.
SCE_NET_CTL_ERROR_ID_NOT_FOUND	NW-31304-1	0x80412104	Specified ID is not found.
SCE_NET_CTL_ERROR_INVALID_ID	NW-31305-2	0x80412105	Specified ID is not found.
SCE_NET_CTL_ERROR_INVALID_CODE	NW-31306-3	0x80412106	Invalid code specified.
SCE_NET_CTL_ERROR_INVALID_ADDR	NW-31307-4	0x80412107	Invalid address specified.
SCE_NET_CTL_ERROR_NOT_CONNECTED	NW-31308-5	0x80412108	Error connecting to the network // Step 1: Reboot the console. Step 2: Perform an Internet connection test ([Settings] > [Network] > [Test Internet Connection]). Step 3: Review and configure your connection settings again if necessary. Step 4: Turn off your router for at 5 minutes, then turn it back on.
SCE_NET_CTL_ERROR_NOT_AVAIL	NW-31309-6	0x80412109	Information not available.
SCE_NET_CTL_ERROR_NETWORK_DISABLED	NW-31310-8	0x8041210D	Network disabled.
SCE_NET_CTL_ERROR_DISCONNECT_REQ	NW-31311-9	0x8041210E	Disconnect event occurred by disconnect request.
SCE_NET_CTL_ERROR_INVALID_TYPE	NW-31312-0	0x8041210F	The specified type is invalid.
SCE_NET_CTL_ERROR_INVALID_SIZE	NW-31313-1	0x80412111	Structure size specified in size member of the structure is invalid.
SCE_NET_CTL_ERROR_ETHERNET_PLUGOUT	NW-31314-2	0x80412115	Ethernet cable is unplugged.
SCE_NET_CTL_ERROR_WIFI_DEAUTHED	NW-31315-3	0x80412116	Deauthorized by access point.
SCE_NET_CTL_ERROR_WIFI_BEACON_LOST	NW-31316-4	0x80412117	Could not receive beacon from access point.
SCE_NET_CTL_ERROR_IPCINT_OUT_OF_MEMORY	NW-31319-7	0x80412183	Could not allocate memory.
SCE_NET_CTL_ERROR_IPCINT_BUSY	NW-31323-2	0x80412187	Not executed due to processing of connect or scan.
SCE_NET_CTL_ERROR_IPCINT_INVALID_SSID	NW-31332-2	0x80412190	The specified SSID is invalid.
SCE_NET_CTL_ERROR_IPCINT_INVALID_SSIDS_NUM	NW-31333-3	0x80412191	The specified number of SSIDs is invalid.
SCE_NET_CTL_ERROR_IPCINT_SCANINFO_LOCKED	NW-31337-7	0x80412199	Could not get scan information due to processing of scan.
SCE_NET_CTL_ERROR_IPCINT_INVALID_SCANINFO_BSSID	NW-31339-9	0x8041219D	The specified BSSID for getting scan information is invalid.
SCE_NET_CTL_ERROR_IPCINT_INVALID_SIZE	NW-31340-1	0x8041219E	The value of size member variable of specified structure is invalid.
SCE_NET_CTL_ERROR_IPCINT_NO_SCANINFO	NW-31341-2	0x8041219F	There is no scan result.
	NW-31367-0		Could not open wireless device // Reboot the console.
	NW-31374-8		Connection timed out // Check that the firewall settings on the router or WAP do not block UDP ports 3478 and 3479. If you don't know how to check this, contact your router manufacturer or ISP for further assistance. If this does not help, then try again later as the server may be experiencing high traffic.
SCE_HTTP_ERROR_BEFORE_INIT	NW-31446-8	0x80431001	Before library initialization
SCE_HTTP_ERROR_ALREADY_INITED	NW-31447-9	0x80431020	Library is already initialized
SCE_HTTP_ERROR_BUSY	NW-31448-0	0x80431021	The specified resource is under use // Connection error // PSN or the game's server may be temporarily unavailable. Please check the status of the game's server via its website. You can check the status of the PSN here. This is likely a temporary issue, try again later.
SCE_HTTP_ERROR_OUT_OF_MEMORY	NW-31449-1	0x80431022	Insufficient free memory space
SCE_HTTP_ERROR_NOT_FOUND	NW-31450-3	0x80431025	The specified element does not exist
SCE_HTTP_ERROR_UNKNOWN_SCHEME	NW-31451-4	0x80431061	Invalid scheme was specified
SCE_HTTP_ERROR_NETWORK	NW-31452-5	0x80431063	Unused
SCE_HTTP_ERROR_BAD_RESPONSE	NW-31453-6	0x80431064	Response is invalid / Delayed server response // Step 1: Try Internet connection test at [Settings] > [Network] > [Test Internet Connection]. Check that the internet status is valid. Step 2: Check PSN status.
SCE_HTTP_ERROR_BEFORE_SEND	NW-31454-7	0x80431065	The specified request has not been sent yet
SCE_HTTP_ERROR_AFTER_SEND	NW-31455-8	0x80431066	Request API was called after request transmission
SCE_HTTP_ERROR_TIMEOUT	NW-31456-9	0x80431068	Connection error (can't connect to PSN or the game server) // Step 1: Check if PSN is up. Step 2: If there are no issues with PSN services, check the status of the game's server via its website to find out if there is any maintenance or high traffic issues. Step 3: If still unable to connect after checking both, this might be a short term issue that will be fixed soon. Try again later.
SCE_HTTP_ERROR_UNKNOWN_AUTH_TYPE	NW-31457-0	0x80431069	The specified authentication type unknown
SCE_HTTP_ERROR_INVALID_VERSION	NW-31458-1	0x8043106A	Invalid version was specified
SCE_HTTP_ERROR_UNKNOWN_METHOD	NW-31459-2	0x8043106B	The value specified in method is invalid
SCE_HTTP_ERROR_READ_BY_HEAD_METHOD	NW-31460-4	0x8043106F	The specified request is for the HEAD method
SCE_HTTP_ERROR_NOT_IN_COM	NW-31461-5	0x80431070	Internal error
SCE_HTTP_ERROR_NO_CONTENT_LENGTH	NW-31462-6	0x80431071	Acquisition API was called by the transaction in which Content-Length is not contained
SCE_HTTP_ERROR_CHUNK_ENC	NW-31463-7	0x80431072	Acquisition API was called by the transaction in which Content-Length is not contained
SCE_HTTP_ERROR_TOO_LARGE_RESPONSE_HEADER	NW-31464-8	0x80431073	Too large a response header was received
SCE_HTTP_ERROR_SSL	NW-31465-9	0x80431075	Failed to SSL communication
SCE_HTTP_ERROR_ABORTED	NW-31466-0	0x80431080	Interruption API is called
SCE_HTTP_ERROR_UNKNOWN	NW-31467-1	0x80431081	Internal error
SCE_HTTP_ERROR_PROXY	NW-31468-2	0x80431084	Failed to establish the connection to the HTTP Proxy
SCE_HTTP_ERROR_BROKEN	NW-31469-3	0x80431085	Internal error
SCE_HTTP_ERROR_INVALID_ID	NW-31470-5	0x80431100	Invalid object ID was specified
SCE_HTTP_ERROR_OUT_OF_SIZE	NW-31471-6	0x80431104	The buffer size is insufficient
SCE_HTTP_ERROR_INVALID_VALUE	NW-31472-7	0x804311FE	Invalid value was specified
SCE_HTTP_ERROR_PARSE_HTTP_NOT_FOUND	NW-31473-8	0x80432025	Failed to connect to the server (connection timed out due to a weak or unstable connection) // Step 1: Check PSN status for failure or maintenance. Step 2: Reboot the console and connect via a wired connection if possible. Step 3: If using a wireless connection, try moving the console closer to the router. Step 4: Turn off your router for at least 5 minutes, then turn it back on. Step 5: If the issue persists, the line may be temporarily busy. Try again later.
SCE_HTTP_ERROR_PARSE_HTTP_INVALID_RESPONSE	NW-31474-9	0x80432060	The specified header field does not exist
SCE_HTTP_ERROR_PARSE_HTTP_INVALID_VALUE	NW-31475-0	0x804321FE	The specified header field does not exist
SCE_HTTP_ERROR_INVALID_URL	NW-31476-1	0x80433060	Invalid URL was specified
SCE_HTTPS_ERROR_CERT	NW-31477-2	0x80435060	Server certificate is invalid
SCE_HTTPS_ERROR_HANDSHAKE	NW-31478-3	0x80435061	Failed to SSL handshake
SCE_HTTPS_ERROR_IO	NW-31479-4	0x80435062	Some communication error occurred during SSL communication
SCE_HTTPS_ERROR_INTERNAL	NW-31480-6	0x80435063	Internal SSL library error
SCE_HTTPS_ERROR_PROXY	NW-31481-7	0x80435064	HTTP PROXY server returned an error before SSL communication
SCE_HTTPS_ERROR_PROHIBITED	NW-31482-8	0x8043506B	Called API with prohibited options
SCE_HTTP_ERROR_RESOLVER_EPACKET	NW-31483-9	0x80436001	Invalid DNS response
SCE_HTTP_ERROR_RESOLVER_ENODNS	NW-31484-0	0x80436002	DNS server not specified // Restart the PS4 system.
SCE_HTTP_ERROR_RESOLVER_ETIMEDOUT	NW-31485-1	0x80436003	Timeout occurred // Restart the PS4 system.
SCE_HTTP_ERROR_RESOLVER_ENOSUPPORT	NW-31486-2	0x80436004	Unsupported function requested by server
SCE_HTTP_ERROR_RESOLVER_EFORMAT	NW-31487-3	0x80436005	Invalid response from server
SCE_HTTP_ERROR_RESOLVER_ESERVERFAILURE	NW-31488-4	0x80436006	Temporary error from server
SCE_HTTP_ERROR_RESOLVER_ENOHOST	NW-31489-5	0x80436007	Inquired host name does not exist
SCE_HTTP_ERROR_RESOLVER_ENOTIMPLEMENTED	NW-31490-7	0x80436008	Inquired function is not implemented
SCE_HTTP_ERROR_RESOLVER_ESERVERREFUSED	NW-31491-8	0x80436009	Inquiry denied
SCE_HTTP_ERROR_RESOLVER_ENORECORD	NW-31492-9	0x8043600A	Inquired record does not exist
SCE_RUDP_ERROR_NOT_INITIALIZED	NW-32626-9	0x80770001	Library was not initialized
SCE_RUDP_ERROR_ALREADY_INITIALIZED	NW-32627-0	0x80770002	Library has already been initialized
SCE_RUDP_ERROR_INVALID_CONTEXT_ID	NW-32628-1	0x80770003	Context ID is invalid
SCE_RUDP_ERROR_INVALID_ARGUMENT	NW-32629-2	0x80770004	Any argument is invalid
SCE_RUDP_ERROR_INVALID_OPTION	NW-32630-4	0x80770005	Option argument is invalid
SCE_RUDP_ERROR_INVALID_MUXMODE	NW-32631-5	0x80770006	Mux mode argument is invalid
SCE_RUDP_ERROR_MEMORY	NW-32632-6	0x80770007	There is not enough memory
SCE_RUDP_ERROR_INTERNAL	NW-32633-7	0x80770008	Internal RUDP error
SCE_RUDP_ERROR_CONN_RESET	NW-32634-8	0x80770009	RUDP connection was reset
SCE_RUDP_ERROR_CONN_REFUSED	NW-32635-9	0x8077000A	A connection request arrives but the pending connection queue is full
SCE_RUDP_ERROR_CONN_TIMEOUT	NW-32636-0	0x8077000B	Timeout occurred before connection establishment
SCE_RUDP_ERROR_CONN_VERSION_MISMATCH	NW-32637-1	0x8077000C	Rudp protocol version is different between the peers
SCE_RUDP_ERROR_CONN_TRANSPORT_TYPE_MISMATCH	NW-32638-2	0x8077000D	Transport type is different between the peers
SCE_RUDP_ERROR_CONN_QUALITY_LEVEL_MISMATCH	NW-32639-3	0x8077000E	Packet with a different quality level was received
SCE_RUDP_ERROR_THREAD	NW-32640-5	0x8077000F	Thread related error occurred
SCE_RUDP_ERROR_THREAD_IN_USE	NW-32641-6	0x80770010	Internal I/O thread already in use
SCE_RUDP_ERROR_NOT_ACCEPTABLE	NW-32642-7	0x80770011	Operation not acceptable
SCE_RUDP_ERROR_MSG_TOO_LARGE	NW-32643-8	0x80770012	Message too large to be sent on this context
SCE_RUDP_ERROR_NOT_BOUND	NW-32644-9	0x80770013	The context has not been bound yet
SCE_RUDP_ERROR_CANCELLED	NW-32645-0	0x80770014	Blocking operation cancelled
SCE_RUDP_ERROR_INVALID_VPORT	NW-32646-1	0x80770015	Invalid vport was used in RudpBind
SCE_RUDP_ERROR_WOULDBLOCK	NW-32647-2	0x80770016	Blocking operation timed out
SCE_RUDP_ERROR_VPORT_IN_USE	NW-32648-3	0x8077001	An already used vport was used in RudpBind
SCE_RUDP_ERROR_VPORT_EXHAUSTED	NW-32649-4	0x80770018	Internal vport resources are exhausted
SCE_RUDP_ERROR_INVALID_SOCKET	NW-32650-6	0x80770019	Socket related error
SCE_RUDP_ERROR_BUFFER_TOO_SMALL	NW-32651-7	0x8077001A	Buffer too small
SCE_RUDP_ERROR_MSG_MALFORMED	NW-32652-8	0x8077001B	Received data is not an RUDP packet or is corrupted
SCE_RUDP_ERROR_ADDR_IN_USE	NW-32653-9	0x8077001C	There is another context that has the same socket connected to the same remote address
SCE_RUDP_ERROR_ALREADY_BOUND	NW-32654-0	0x8077001D	Socket is already bound
SCE_RUDP_ERROR_ALREADY_EXISTS	NW-32655-1	0x8077001E	Polling for this context already exists
SCE_RUDP_ERROR_INVALID_POLL_ID	NW-32656-2	0x8077001F	Poll ID is invalid
SCE_RUDP_ERROR_TOO_MANY_CONTEXTS	NW-32657-3	0x80770020	Too many contexts
SCE_RUDP_ERROR_IN_PROGRESS	NW-32658-4	0x80770021	Operation is in progress
SCE_RUDP_ERROR_NO_EVENT_HANDLER	NW-32659-5	0x80770022	Common event handler has not been registered
SCE_RUDP_ERROR_PAYLOAD_TOO_LARGE	NW-32660-7	0x80770023	Payload is too large when setting SCE_RUDP_OPTION_MAX_PAYLOAD option
SCE_RUDP_ERROR_END_OF_DATA	NW-32661-8	0x80770024	No more data to read from the peer
SCE_RUDP_ERROR_ALREADY_ESTABLISHED	NW-32662-9	0x80770025	Connection is already established between the peers
SCE_RUDP_ERROR_KEEP_ALIVE_FAILURE	NW-32663-0	0x80770026	Connection was closed due to keep-alive timeout
SCE_RUDP_ERROR_MEMLEAK	NW-32664-1	0x807700FF	Rudp didn't free all of its allocated memory
	NW-34345-9	0x80431074	Error connecting to the network // Step 1: Check PSN status to see if there any issues. Step 2: Reboot the console. Step 3: Perform an Internet connection test by selecting [Settings] > [Network] > [Test Internet Connection]. Step 4: If possible, try connecting to the internet via a wired connection. Step 5: Turn off your router for at least 5 minutes, then turn it back on. Step 6: Update router to the latest firmware. For details, contact the manufacturer.
SCE_HTTP_ERROR_INSUFFICIENT_STACKSIZE	NW-34347-1	0x80431076	Insufficient stack size

SU - Software Update

Name	Errorcode	Returncode	Remarks
SCE_UPDATER_CORE_ERROR_GENERAL	SU-30622-3	0x80180000
SCE_UPDATER_CORE_ERROR_INVAL	SU-30623-4	0x80180001
SCE_UPDATER_CORE_ERROR_NOMEM	SU-30624-5	0x80180002
SCE_UPDATER_CORE_ERROR_WRONG_FORMAT	SU-30625-6	0x80180003	Failed to update the system software // Try updating again. If this doesn't help, boot console in Safe Mode and select [Update System Software]. If trying to update via the Internet, turn off your router for at least 5 minutes, then turn it back on and try updating again.
SCE_UPDATER_CORE_ERROR_NOT_FOUND	SU-30626-7	0x80180004
SCE_UPDATER_CORE_ERROR_IO	SU-30627-8	0x80180005	Error accessing the data file // Step 1: Reboot the console. Step 2: Start the PS4 in Safe Mode and select [Rebuild Database]. Step 3: Back up data from [Settings] > [Application Saved Data Management]. Step 4: Initialize the console from [Settings] > [Initialization] > [Initialize PS4].
SCE_UPDATER_CORE_ERROR_BAD_STATE	SU-30628-9	0x80180006
SCE_UPDATER_CORE_ERROR_NOENT	SU-30628-9	0x80180007
SCE_UPDATER_CORE_ERROR_HDD_PART	SU-30630-2	0x80180008
SCE_UPDATER_CORE_ERROR_VERIFY_WRITE	SU-30631-3	0x80180009	USB error occurred while updating the system software // Step 1: Delete the Update file from the USB storage device. Step 2: Clear your browser cache and redownload the PUP file here. Then retry the system update. Step 3: If the error persists, try another USB device. Step 4: If the error occurs again there may be an issue with the PS4's hard drive (HDD). If you have previously changed the HDD, use the other HDD. If not, please visit our Contact page to contact SCEA for additional technical support. Can also be caused by NOR flash corruption - repair tutorial can be found here: youtube.com/watch?v=35DFGCim_WY (YouTube - Andrew Paul)
SCE_UPDATER_CORE_ERROR_SYSTEM_VERSION	SU-30632-4	0x8018000A
SCE_UPDATER_CORE_ERROR_VERIFY_ONLY	SU-30633-5	0x8018000B
SCE_UPDATER_CORE_ERROR_SHORT_FILE	SU-30634-6	0x8018000C	USB error occurred while updating the system software // Step 1: Delete the Update file from the USB storage device. Step 2: Clear your browser cache and redownload the PUP file here. Then retry the system update. Step 3: If the error persists, try another USB device. Step 4: If the error occurs again there may be an issue with the PS4's hard drive (HDD). If you have previously changed the HDD, use the other HDD. If not, please visit our Contact page to contact SCEA for additional technical support.
SCE_UPDATER_CORE_ERROR_CANCELLED	SU-30635-7	0x8018000D
SCE_UPDATER_CORE_ERROR_PUP_US_GENERAL	SU-30636-8	0x80180850
SCE_UPDATER_CORE_ERROR_PUP_US_PERM	SU-30637-9	0x80180851
SCE_UPDATER_CORE_ERROR_PUP_US_BUSY	SU-30638-0	0x80180010	System software update could not be started // Reboot the console and try updating again from [Settings] > [System Software Update]. If the situation does not improve try updating in Safe Mode instead.
SCE_UPDATER_CORE_ERROR_PUP_US_INVAL	SU-30639-1	0x80180853
SCE_UPDATER_CORE_ERROR_PUP_US_NOMEM	SU-30640-3	0x80180854
SCE_UPDATER_CORE_ERROR_PUP_US_IO	SU-30641-4	0x80180855
SCE_UPDATER_CORE_ERROR_PUP_US_BADF	SU-30642-5	0x80180856
SCE_UPDATER_CORE_ERROR_PUP_US_FAULT	SU-30643-6	0x80180857
SCE_UPDATER_CORE_ERROR_PUP_US_FTYPE	SU-30644-7	0x80180858
SCE_UPDATER_CORE_ERROR_PUP_US_AUTH	SU-30645-8	0x80180859	Console did not recognize the system software update file // Step 1: Completely power down the console by holding the power button for three seconds. Step 2: Once the console is off, press and hold the power button again. Release it after you hear a second beep (one beep sounds when you first press, and another seven seconds later). The console starts in safe mode. Step 3: Connect a controller with the USB cable and press the PS button. Step 3: Select [Update System Software].
SCE_UPDATER_CORE_ERROR_PUP_US_BADMSG	SU-30646-9	0x8018085A
SCE_UPDATER_CORE_ERROR_PUP_US_REVOKED	SU-30647-0	0x8018085B
SCE_UPDATER_CORE_ERROR_PUP_US_NOATTR	SU-30648-1	0x8018085C
SCE_UPDATER_CORE_ERROR_PUP_US_VER	SU-30649-2	0x8018085D	Failed to update the system software. The update file may be corrupted. // If you are updating the system via Internet, go to [Settings] > [System Software Update] and retry update. If you are updating via USB storage device, delete the update file on USB and redownload the update file from playstation.com. Then retry updating at [Settings] > [System Software Update] OR Devkit/Testkit -> [ERROR]The PUP file version is too low to be used for downgrading from the current version of this devkit. (when attempting to downgrade below the minimal version of a devkit with a downgrader pup)
SCE_UPDATER_CORE_ERROR_PUP_US_PLATFORM	SU-30650-4	0x8018085E
	SU-30677-3		Failed to update the PS4 system software // System software update failed. If a disc is inserted, eject it and reboot the console in Safe Mode and update via Safe Mode. If still having issues, try backing up all data and resetting the console.
	SU-30683-0	0x80180fff	Update via USB storage failed // Step 1: Go to Safe Mode, choose option 7, [Initialize PS4], and follow the onscreen instructions. You can find more information on Safe Mode here. Step 2: If the error occurs again, please visit SCEA Contact page for additional technical support.
	SU-30696-4	0x8018220c	Failed to update the System Software. The update file may be corrupted // If you are updating the system via Internet, go to [Settings] > [System Software Update] and retry the update. If you are updating via a USB storage device, try updating via the Internet instead. Go to [Settings] > [System Software Update] > [Update via Internet]. If this isn't possible, re-download the latest System Update using a web browser. You'll need to install this using a USB storage device, and the correct folder structure. If still experiencing issues updating the system software, try updating via Safe Mode (Option 3).
	SU-30709-9	0x80182260
	SU-30733-6	0x80182605	The latest version of the system software is already installed. // No Action Required.
	SU-30746-0		The system software update has failed (could not update via internet) // Step 1: Reboot the PS4 and try to update the system software using a wired connection if possible. Step 2: Select [Notifications] from the PS4 function area, highlight the update file and press the OPTIONS button > [Delete]. Step 3: Next, select [Settings] > [System Software Update]. Step 4: If you experience multiple failed downloads, update the PS4 system software using a USB instead.
	SU-34322-4		Failed to update the system software. Update has timed out. // Updating Via Internet: Go to [Notifications] > [Downloads] and highlight the notification about the system software update. Push the [Options] button and delete the content. Then retry the update by going to [Settings] > [System Software Update] Updating Via USB: Retry the update by going to [Settings] > [System Software Update].
	SU-34323-5
	SU-34324-6
	SU-34325-7
	SU-34326-8
	SU-34327-9	0x80182611
	SU-34328-0	0x80182612	An internal error occurred. // Please try again later.
	SU-34697-9		Issues relating to the hard disk drive (defective, bad sectors etc). Replace the hard disk drive.
	SU-34914-1		Failed to update // Step 1: If the system software is not up to date, update it to the latest version. Step 2: If the game update fails, check the progress of the download. If it is in progress, wait until it completes. Step 3: Check that you have enough storage space (delete as needed). Step 4: Turn off your router, wait at least 5 minutes, then turn it back on. Step 5: Try deleting and reinstalling the application.
	SU-35931-1		System software update data is partially corrupted (update partially corrupted due to network instability) // Step 1: Reboot the PS4 and download the update again by navigating to [Settings] > [System Update] > [Update via Internet]. Step 2: If this doesn't work, try updating via USB. If the update fails multiple times, console may need to be sent in for repairs. Contact PlayStation Support.
	SU-41283-8		WiFi/Bluetooth Firmware Error / Can Not Communicate with WiFi/Bluetooth IC. Replace WiFi/Bluetooth IC OR Reflash NOR with correct WiFi/Bluetooth Firmware. Guide here: https://www.youtube.com/watch?v=HbiCwAKmNoE (Andrew Paul)
	SU-41333-4		Issue when updating the PS4 system software // Step 1: Turn off and unplug your console. Step 2: Turn off your router/modem, wait at least 5 minutes, and then restart the router/modem. Step 3: Plug the console back in and restart it. Step 4: Select [Notifications] from the PS4™ console function area, highlight the update file, press the OPTIONS button, and select [Delete]. Step 5: Select [Settings] > [System Software Update].
	SU-41350-3		Update file cannot be recognized // Try connecting via a wired (Ethernet) connection. Select [Notifications] from the PS4 function area, highlight the update file and press the OPTIONS button > [Delete]. Then select [Settings] > [System Software Update]. If still having issues, boot the PS4 in Safe Mode and try updating via a USB drive.
	SU-41764-2		An error occurred with updating the system software // Step 1: Go to [Settings] > [System Software Update] and retry the update. Step 2: Download the latest System Update at our Help Page and update via a USB storage device by navigating to [Settings] > [System Software Update] > [Update via Internet]. Step 3: Please ensure the USB storage has the correct folder structure and the correct file (update file only) has been copied over. Step 4: If the error occurs again, back up your saved data, and then go to Settings > Initialization and select Initialize PS4™. This is an advanced solution that will format and erase all data on the hard drive. If the error and issue persists, please contact PlayStation Support.
	SU-42118-6		BD-ROM Drive Error / Can Not Communicate with BD-ROM. Check BD-ROM Ribbon between motherboard and drive. If the tabs are broken, replace cable and test. Also check connectors for breaks or corrosion. If no better, check and replace drive board fuses where bad: CUH-10xx / 11xx series consoles: F501, F201, F202 and F203. May require Renesas IC swap to donor daughterboard if all else fails. CUH-12xx series consoles: Typically F6202 (located on main system board). CUH-2xxx series consoles: F6201 / F6202 (located on main system board). CUH-7xxx series consoles: F6201 / F6202 (located on main system board).
	SU-42481-9		The system software update has failed (could not update via internet) // Step 1: Reboot the console and try to update the system software using a wired Internet connection if possible. Step 2: Select [Notifications] from the PS4 function area, highlight the update file and press the OPTIONS button > [Delete]. Step 3: Next, select [Settings] > [System Software Update]. Step 4: If you experience multiple failed downloads, update the PS4 system software using a USB instead.

WS - Web ?Server?

Name	Errorcode	Returncode	Remarks
SCE_NP_WEBAPI_SERVER_ERROR_ASM_BAD_REQUEST	WS-36577-8	0x82200001	Details are unknown, but an invalid value was included in request (header, body, query string, etc.) (JSON error code: 2097153)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_UNSUPPORTED_API_VERSION	WS-36578-9	0x82200002	Unsupported API version (JSON error code: 2097154)
	WS-36579-0	0x82200003	JSON error code: 2097155
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_NP_ENVIRONMENT	WS-36580-2	0x82200004	Environment name is invalid (JSON error code: 2097156)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_NP_TITLE_ID	WS-36581-3	0x82200005	NP Title ID is invalid (JSON error code: 2097157)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_NP_SERVICE_LABEL	WS-36582-4	0x82200006	JSON error code: 2097158
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_NP_COMMUNICATION_ID	WS-36583-5	0x82200007	JSON error code: 2097159
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_SERVICE_ID	WS-36584-6	0x82200008	Service ID is invalid (JSON error code: 2097160)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_NP_SERVICE_NAME	WS-36585-7	0x82200009	NP Service Name is invalid (JSON error code: 2097161)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_OAUTH_CLIENT_ID	WS-36586-8	0x8220000A	OAuth client ID is invalid (JSON error code: 2097162)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NP_TITLE_ID_NOT_MATCHING_TOKENS	WS-36587-9	0x8220000B	The specified NP Title ID and NP Title ID in NP Titile token's do not match. (JSON error code: 2097163)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_USER_NOT_FOUND	WS-36588-0	0x8220000C	Target user does not exist (JSON error code: 2097164)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_RESOURCE_NOT_FOUND	WS-36589-1	0x8220000D	Target resource does not exist (JSON error code: 2097165)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_ACCESS_DENIED_BY_RESOURCE_OWNERSHIP	WS-36590-3	0x8220000E	Access attempted by a non-owner for a resource that only the resource owner can access. For example, attempted to obtain a friend list with presence information of another user. (JSON error code: 2097166)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_QUERY_STRING	WS-36591-4	0x82200100	Details are unknown, but an value in query string is invalid (JSON error code: 2097408)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_QUERY_PARAMETER	WS-36592-5	0x82200101	Query parameter value in query string is invalid (JSON error code: 2097409)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_QUERY_PARAMETER_COMBINATION	WS-36593-6	0x82200102	Query parameter combination in query string is invalid (JSON error code: 2097410)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_UNAVAILABLE_QUERY_PARAMETER_FOR_RESOURCE	WS-36594-7	0x82200103	Specified query parameter cannot be used for the specified resource (JSON error code: 2097411)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_PARAMETER_IN_URL	WS-36595-8	0x82200104	Parameter section value included in URL is invalid (JSON error code: 2097412)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_MANDATORY_QUERY_PARAMETER_MISSING	WS-36596-9	0x82200105	Query parameter required for query string does not exist (JSON error code: 2097413)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_HEADER	WS-36597-0	0x82200140	Header value for request header is invalid (JSON error code: 2097472)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_HEADER_REQUIRED	WS-36598-1	0x82200141	Header required for request header does not exist (JSON error code: 2097473)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_BODY	WS-36599-2	0x82200180	Details are unknown, but request body value is invalid (JSON error code: 2097536)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NULL_VALUE_NOT_ALLOWED	WS-36600-5	0x82200181	A member with a null value in request body exists (JSON error code: 2097537
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_BODY_PARAMETER	WS-36601-6	0x82200182	Request body member value is invalid (JSON error code: 2097538)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_BODY_PARAMETER_LIST_LENGTH	WS-36602-7	0x82200183	Number of elements for request body array type members is invalid (JSON error code: 2097539)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_BODY_PARAMETER_COMBINATION	WS-36603-8	0x82200184	Request body member combination is invalid (JSON error code: 2097540)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_BLOCKED_USER_EXISTS	WS-36604-9	0x82200185	Blocked user can't be specified (JSON error code: 2097541)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_MANDATORY_BODY_PARAMETER_MISSING	WS-36605-0	0x82200186	Member required for request body does not exist (JSON error code: 2097542)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_MULTIPART_HEADER	WS-36606-1	0x82200187	Parameter for multipart header in request body is invalid (JSON error code: 2097543)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_MANDATORY_MULTIPART_HEADER_MISSING	WS-36607-2	0x82200188	Member required for multipart header parameter in request body does not exist (JSON error code: 2097544)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_ACCESS_TOKEN_REQUIRED	WS-36608-3	0x82200200	No access token (JSON error code: 2097664)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_ACCESS_TOKEN	WS-36609-4	0x82200201	Access token is an invalid value or is corrupted (JSON error code: 2097665)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_EXPIRED_ACCESS_TOKEN	WS-36610-6	0x82200202	Access token is expired (JSON error code: 2097666)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NP_TITLE_TOKEN_REQUIRED	WS-36611-7	0x82200203	No NP Title token (JSON error code: 2097667)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_INVALID_NP_TITLE_TOKEN	WS-36612-8	0x82200204	NP Title token is an invalid value or is corrupted (JSON error code: 2097668)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_EXPIRED_NP_TITLE_TOKEN	WS-36613-9	0x82200205	NP Title token is expired (JSON error code: 2097669)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NOT_AUTHORIZED	WS-36614-0	0x82200206	Not authorized to access specified resource or use query parameter (JSON error code: 2097670)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_BANNED_APPLICATION	WS-36615-1	0x82200207	Banned title (JSON error code: 2097671)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_BANNED_USER	WS-36616-2	0x82200208	Banned user (JSON error code: 2097672)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_BANNED_DEVICE	WS-36617-3	0x82200209	Banned device (JSON error code: 2097673)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_ACCESS_DENIED_DUE_TO_TITILE_MISMATCH	WS-36618-4	0x8220020A	Access to resource not possible since title does not match (JSON error code: 2097674)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_RATE_LIMIT_EXCEEDED	WS-36619-5	0x8220020B	API rate limit was exceeded (JSON error code: 2097675)
	WS-36620-7	0x8220020C	JSON error code: 2097676
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NOT_AUTHORIZED_ACCESS_TOKEN	WS-36621-8	0x8220020D	Access token was obtained with an invalid procedure (JSON error code: 2097677)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NEED_TO_UPGRADE	WS-36622-9	0x8220020E	Account needs to upgrade (JSON error code: 2097678)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NOT_AUTHORIZED_ON_PLATFORM	WS-36623-0	0x8220020F	Parameter which is not available on the platform is specified (JSON error code: 2097679)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_USERS_ACCESS_TOKEN_REQUIRED	WS-36624-1	0x82200210	The API which doesn't permit an access with access token authenticated only with client credential. (JSON error code: 2097680)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_UNKNOWN_CLIENT	WS-36625-2	0x82200280	Client ID for access token is invalid (JSON error code: 2097792)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NP_TITLE_ID_NOT_FOUND	WS-36626-3	0x82200281	Title does not exist (JSON error code: 2097793)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NP_SERVICE_LABEL_NOT_FOUND	WS-36627-4	0x82200282	NP Service Label does not exist (JSON error code: 2097794)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NOT_AUTHORIZED_APPLICATION	WS-36628-5	0x82200283	This title cannot be used for the specified service (JSON error code: 2097795)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_NP_COMMUNICATION_ID_NOT_FOUND	WS-36629-6	0x82200284	NP Communication ID does not exist (JSON error code: 2097796)
SCE_NP_WEBAPI_SERVER_ERROR_ASM_SERVICE_ID_NOT_FOUND	WS-36630-8	0x82200285	Service ID does not exist (JSON error code: 2097797)
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_USER_NOT_FOUND	WS-36724-2	0x8220200C	Target user does not exist.
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_RESOURCE_NOT_FOUND	WS-36725-3	0x8220200D	Target resource does not exist.
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_ACCESS_DENIED_BY_RESOURCE_OWNERSHIP	WS-36726-4	0x8220200e	Access attempted by a non-owner for a resource that only the resource owner can access. For example, attempted to obtain a friend list with presence information of another user.
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_RATE_LIMIT_EXCEEDED	WS-36755-6	0x8220220b	Cannot connect to the server. It has been accessed too frequently by you, so access is being restricted. Please try again later.
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_ACCESS_DENIED_BY_PRIVACY_LEVEL	WS-36756-7	0x8220220c	Access was denied due to target user privacy setting.
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_NOT_AUTHORIZED_ACCESS_TOKEN	WS-36757-8	0x8220220d	Access token was obtained with an invalid procedure
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_INTERNAL_SERVER_ERROR	WS-36768-0	0x82202301	Internal error of the server
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_FRIEND_REQUEST_NOT_FOUND	WS-36777-0	0x82202900	Friend request does not exist
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_NOT_IN_FRIEND_LIST	WS-36778-1	0x82202901	User does not exist in friends list
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_ALREADY_FRIEND_REQUESTED	WS-36780-4	0x82202903	Already friend-requested
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_REQUESTERS_FRIEND_LIST_FULL	WS-36781-5	0x82202904	Requester's friend list is full.
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_REQUESTED_USERS_FRIEND_LIST_FULL	WS-36782-6	0x82202905	Friend request cannot be sent // Requested user's friend list is full.
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_NAME_ALREADY_SHARED	WS-36783-7	0x82202906	Already shared their name
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_BLOCKED_USER	WS-36784-8	0x82202907	Blocked user can't be specified (JSON error code: 2105733)
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_NAME_SHARING_REQUEST_NOT_FOUND	WS-36785-9	0x82202908	Name-sharing request does not exist
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_ALREADY_NAME_SHARING_REQUESTED	WS-36786-0	0x82202909	Already requested to share their name
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_NAME_REGISTRATION_REQUIRED	WS-36787-1	0x8220290a	Name registration of the user is needed
SCE_NP_WEBAPI_SERVER_ERROR_USER_PROFILE_TARGET_USER_NOT_REGISTERED_NAME	WS-36788-2	0x8220290b	Name registration of the target user is needed
SCE_NP_WEBAPI_SERVER_ERROR_SESSION_INVITATION_RESOURCE_NOT_FOUND	WS-36812-0	0x8220400d	Unable to join a party (error occurred with the party invitation) // Ask your friend to resend the invitation.
SCE_NP_WEBAPI_SERVER_ERROR_SESSION_INVITATION_RATE_LIMIT_EXCEEDED	WS-36842-3	0x8220420b	API rate limit was exceeded
SCE_NP_WEBAPI_SERVER_ERROR_SESSION_INVITATION_ACCESS_DENIED_BY_PRIVACY_LEVEL	WS-36843-4	0x8220420c	Access was denied due to target user privacy setting
SCE_NP_WEBAPI_SERVER_ERROR_SESSION_INVITATION_NOT_AUTHORIZED_ACCESS_TOKEN	WS-36844-5	0x8220420d	Access token was obtained with an invalid procedure
SCE_NP_WEBAPI_SERVER_ERROR_SESSION_INVITATION_INTERNAL_SERVER_ERROR	WS-36855-7	0x82204301	Internal error of the server
SCE_NP_WEBAPI_SERVER_ERROR_GROUP_MESSAGING_INTERNAL_SERVER_ERROR	WS-36987-3	0x82206301	Internal error of the server
SCE_NP_WEBAPI_SERVER_ERROR_TROPHY_RESOURCE_NOT_FOUND	WS-37073-0	0x8220a00d	Target resource does not exist
SCE_NP_WEBAPI_SERVER_ERROR_ENTITLEMENTS_INTERNAL_ERROR	WS-37269-7	0x82303f02	Internal error occurred (JSON error code: 3161858)
SCE_NP_WEBAPI_SERVER_ERROR_ENTITLEMENTS_SERVICE_UNAVAILABLE	WS-37270-9	0x82303f03	Service is undergoing maintenance (JSON error code: 3161859)
SCE_NP_WEBAPI_SERVER_ERROR_ENTITLEMENTS_RESOURCE_NOT_FOUND	WS-37271-0	0x82303f04	Resource was not found (JSON error code: 3161860)
SCE_NP_WEBAPI_SERVER_ERROR_SOCIAL_NETWORK_RESOURCE_NOT_FOUND	WS-37305-8	0x82305f04	Resource was not found (JSON error code: 3170052)
	WS-37313-7		Error occurred when linking YouTube account to PSN // On a computer, sign in to the Google account registered on the console. Go to PSN and select Revoke access. On the console, go to [Settings] > [Account Management] > [Link with Other Services] > [YouTube] > [Sign-In] and link the account again. Go to [Notifications] > [Uploads] and try uploading the video again.
SCE_NP_WEBAPI_SERVER_ERROR_OAUTH_28_ACCOUNT_HAS_BEEN_BANNED	WS-37337-3	0x82e0001c	Your account has been temporarily suspended // Your account has been temporarily suspended from accessing PSN services for violating our Terms of Service and User Agreement. Please check the e-mail account associated with the account for further information.
SCE_NP_WEBAPI_SERVER_ERROR_OAUTH_29_CONSOLE_HAS_BEEN_BANNED	WS-37338-4	0x82e0001d	Issue when accessing PSN (account may be suspended for ToS violation) // Account may have been suspended for a violation of the PSN Terms of Service. 1) An email may be sent to your Sign-In ID if you have been temporarily suspended. Check your email. 2) Check the terms of service before accessing PSN again.
SCE_NP_WEBAPI_SERVER_ERROR_OAUTH_4176_ACCOUNT_HAS_BEEN_BANNED	WS-37368-7	0x82e01050	Your account has been suspended (suspended for chargeback on purchase) // Your account has been suspended from accessing PSN services for violating our Terms of Service and User Agreement. Please check the e-mail account associated with the account for further information.
	WS-37397-9		Could not connect to server (PSN down or blocked IP address) // 1) Check the status of the PSN to see if there are network issues. 2) If this error is encountered while PSN is online, your IP address has been blocked for activity that violates the Terms of Service and User Agreement. 3) The activity may have been caused by a virus on a device connected to your home network. Perform a virus scan on all connected devices. 4) If you need more information, contact your ISP. More information has already been provided to your ISP. 5) Once the matter is resolved, the IP assigned to you will be automatically unblocked.
SCE_NP_WEBAPI_SERVER_ERROR_OAUTH_HTTP_STATUS_CODE_502_BAD_GATEWAY	WS-37431-8	0x82e101f6	Connection to server failed // Step 1: PSN or the game's server may be temporarily unavailable. Please check the status of the game's server via its website. You can check the status of the PSN here. Step 2 : If the servers are active, run the Internet connection test at [Settings] > [Network] > [Test Internet Connection] and make sure you can connect to the network. Step 3: Update your router to the latest firmware. Turn off other devices that are connected to your network to reduce stress. If this does not work, try again later as the server may be experiencing high volume. (HTTP status code: 502)
	WS-37469-9		Failed to connect to server // Step 1: Check the PSN status page. Step 2: Turn off router, wait at least 5 minutes, then turn it back on. Step 3: Try again later (temporary issue).
SCE_NP_WEBAPI_SERVER_ERROR_HTTP_STATUS_CODE_404_NOT_FOUND	WS-37470-1	0x82f00194	Error occurred and the HTTP status code with or without non-JSON body was returned (HTTP status code: 404)
	WS-37501-6		Internal server error. An error occurred when connecting to the server // Reboot the system. If the error persists, it may be a server issue. Try again later.
SCE_NP_WEBAPI_SERVER_ERROR_HTTP_STATUS_CODE_503_SERVICE_UNAVAILABLE	WS-37504-9	0x82f001f7	PSN is under maintenance // For more information, check PSN status. (HTTP status code: 503)
SCE_NP_WEBAPI_SERVER_ERROR_HTTP_STATUS_CODE_504_GATEWAY_TIMEOUT	WS-37505-0	0x82f001f8	Connection between console and server failed // Step 1: Check the status of the game's server via its website. Step 2: Check the status of the PSN. If the servers are active, use the PlayStation Repairs diagnostic tool. (HTTP status code: 504)
	WS-43689-0		An error occurred with the payment (payment did not go through) // Step 1: Check if the credit information registered in your account is correct, including the expiration date. Step 2: Re-register your credit card. Step 3: Try with another credit card. Step 4: This may be a temporary issue, try again later. Step 5: Consider topping up your wallet using a PSS card instead.
	WS-43701-5		Error occurred when making a payment (not enough funds in wallet) // Add funds to the wallet using a payment method or a PSS gift card. Once the funds have been added, reboot the console. If still getting the error, go to [Settings] > [Account Management], sign out, then back in. If still getting the error, wait 24 hours and then try making the purchase again.
	WS-43709-3		Check expiration date of credit card (card may have expired) // Step 1: Check expiration date of your credit card and register a valid credit card. Step 2: If there is no problem with the expiration date, double-check that the registration information (such as the credit card number) is correct. Step 3: Delete the currently registered credit card and register it again. Step 4: If possible, register another credit card and check if it can be used. Step 5: This may be a temporary issue. Use another payment method or wait 24 hours before attempting to add payment information.
	WS-44369-6		PSN may be undergoing maintenance // Step 1: Check PSN status for outages or maintenance. Step 2: Turn off the console and unplug it, then reboot it. Step 3: Go to [Settings] > [Network] > [Test Internet Connection]. Change network settings if necessary. Step 4: Turn off router or modem for at least 5 minutes, then turn it back on.
	WS-44949-0		This action has been temporarily restricted (e.g. changed payment method info too many times) // Try signing into Account Management using a web browser. Make sure you are using the correct sign-in ID (email address) and password. If still getting the error, wait 24 hours before signing in again.
	WS-45479-9		This voucher code has already been redeemed // Check transaction history: Go to [Settings] > [Account Management] > [Account Information]. Select [Wallet] > [Transaction history].
	WS-45480-1		Voucher code entered is invalid; PSN country/region and code number country/region do not match // Make sure the code is entered correctly. Check whether the code has expired (some codes have an expiry date listed on the voucher). Check whether the voucher has any use/age restrictions.
	WS-45487-8		This voucher code has already been redeemed // Check transaction history: Go to [Settings] > [Account Management] > [Account Information]. Select [Wallet] > [Transaction history].

WV - Web View

Name	Errorcode	Returncode	Remarks
SCE_WEBVIEW_NETWORK_ERROR_UNSUPPORTED_PROTOCOL	WV-33894-7	0x80E80001	Invalid scheme was specified
SCE_WEBVIEW_NETWORK_ERROR_FAILED_INIT	WV-33895-8	0x80E80002	Very early initialization code failed. This is likely to be an internal error or problem.
SCE_WEBVIEW_NETWORK_ERROR_URL_MALFORMAT	WV-33896-9	0x80E80003	Invalid URL format was specified
SCE_WEBVIEW_NETWORK_ERROR_COULDNT_RESOLVE_PROXY	WV-33897-0	0x80E80005	Could not connect to the proxy server.
SCE_WEBVIEW_NETWORK_ERROR_COULDNT_RESOLVE_HOST	WV-33898-1	0x80E80006	Problem connecting to server (incorrect URL, PSN down, or connection issues) // Step 1: Check to make sure the URL you typed is correct. Step 2: Check PSN status for any server issues. Step 3: Try connecting to the internet using a wired (ethernet) connection. Step 4: Turn off the console and unplug it. Step 5: Turn off router/modem for at least 5 minutes, then restart it. Step 6: Plug the console back in and reboot it. Step 7: Try changing DNS settings. Set up a new internet connection and select [DNS Settings (Manual)], then add the address for a public DNS (e.g Google).
SCE_WEBVIEW_NETWORK_ERROR_COULDNT_CONNECT	WV-33899-2	0x80E80007	Failed to connect to host or proxy / Could not connect to PSN // Step 1: PSN may be down, check PSN status. Step 2: If PSN is up, perform an Internet connection test by going to [Settings] > [Network Connection] > [Test Internet Connection] to confirm that you can connect to the Internet. Step 3: Update your router's firmware (contact ISP for assistance if required). Turn off other devices connected to the network. If still experiencing difficulties then try again later as the server may be experiencing high traffic.
SCE_WEBVIEW_NETWORK_ERROR_REMOTE_ACCESS_DENIED	WV-33900-5	0x80E80009	A service was denied by the server due to lack of access - when login fails this is not returned.
SCE_WEBVIEW_NETWORK_ERROR_PARTIAL_FILE	WV-33901-6	0x80E80012	A file transfer was shorter or larger than expected. This happens when the server first reports an expected transfer size and then delivers data that doesn't match the previously given size.
SCE_WEBVIEW_NETWORK_ERROR_QUOTE_ERROR	WV-33902-7	0x80E80015	When sending custom "QUOTE" commands to the remote server one of the commands returned an error code that was 400 or higher.
SCE_WEBVIEW_NETWORK_ERROR_WRITE_ERROR	WV-33903-8	0x80E80017	Could not write file or socket
SCE_WEBVIEW_NETWORK_ERROR_UPLOAD_FAILED	WV-33904-9	0x80E80019	Failed upload "command"
SCE_WEBVIEW_NETWORK_ERROR_READ_ERROR	WV-33905-0	0x80E8001A	Couldn't open/read from file
SCE_WEBVIEW_NETWORK_ERROR_OUT_OF_MEMORY	WV-33906-1	0x80E8001B	Out of memory. A memory allocation request failed. This is serious badness and things are severely screwed up if this ever occur.
SCE_WEBVIEW_NETWORK_ERROR_OPERATION_TIMEDOUT	WV-33907-2	0x80E8001C	The specified time-out period was reached according to the conditions. / Timed out while connecting to the server (busy or unstable connection) // Step 1: Go to [Settings] > [Network Connection] > [Test Internet Connection] and check network status and try connecting to the network again. Step 2: If the error persists, the network may be unstable; reboot the console and try connecting again, move the console and router closer together, wait for other devices to finish using bandwidth or try connecting to another network. Step 3: Check PSN status.
SCE_WEBVIEW_NETWORK_ERROR_RANGE_ERROR	WV-33908-3	0x80E80021	The HTTP server does not support or accept range requests.
SCE_WEBVIEW_NETWORK_ERROR_HTTP_POST_ERROR	WV-33909-4	0x80E80022	This is an odd error that mainly occurs due to internal confusion.
SCE_WEBVIEW_NETWORK_ERROR_SSL_CONNECT_ERROR	WV-33910-6	0x80E80023	Error when connecting with SSL
SCE_WEBVIEW_NETWORK_ERROR_BAD_DOWNLOAD_RESUME	WV-33911-7	0x80E80024	Attempting FTP resume beyond file size.
SCE_WEBVIEW_NETWORK_ERROR_FILE_COULDNT_READ_FILE	WV-33912-8	0x80E80025	A file given with FILE:// couldn't be opened. Most likely because the file path doesn't identify an existing file. Did you check file permissions?
SCE_WEBVIEW_NETWORK_ERROR_FUNCTION_NOT_FOUND	WV-33913-9	0x80E80029	Function not found. A required LDAP function was not found.
SCE_WEBVIEW_NETWORK_ERROR_ABORTED_BY_CALLBACK	WV-33914-0	0x80E8002A	Aborted by callback. A callback returned "abort" to libcurl.
SCE_WEBVIEW_NETWORK_ERROR_BAD_FUNCTION_ARGUMENT	WV-33915-1	0x80E8002B	Internal error. A function was called with a bad parameter.
SCE_WEBVIEW_NETWORK_ERROR_INTERFACE_FAILED	WV-33916-2	0x80E8002D	Interface error. A specified outgoing interface could not be used. Set which interface to use for outgoing connections' source IP address with CURLOPT_INTERFACE.
SCE_WEBVIEW_NETWORK_ERROR_TOO_MANY_REDIRECTS	WV-33917-3	0x80E8002F	Error occurred due to too many redirects // Web page not supported by console. Use another device instead.
SCE_WEBVIEW_NETWORK_ERROR_UNKNOWN_OPTION	WV-33918-4	0x80E80030	An option set with CURLOPT_TELNETOPTIONS was not recognized/known. Refer to the appropriate documentation.
SCE_WEBVIEW_NETWORK_ERROR_PEER_FAILED_VERIFICATION	WV-33919-5	0x80E80033	The remote server's SSL certificate was deemed not OK.
SCE_WEBVIEW_NETWORK_ERROR_SEND_ERROR	WV-33920-7	0x80E80037	Failed sending network data.
SCE_WEBVIEW_NETWORK_ERROR_RECV_ERROR	WV-33921-8	0x80E80038	Failure with receiving network data.
SCE_WEBVIEW_NETWORK_ERROR_SSL_CERTPROBLEM	WV-33922-9	0x80E8003A	Problem with the local certificate
SCE_WEBVIEW_NETWORK_ERROR_SSL_CIPHER	WV-33923-0	0x80E8003B	Couldn't use specified cipher
SCE_WEBVIEW_NETWORK_ERROR_SSL_CACERT	WV-33924-1	0x80E8003C	Problem with the CA cert (path?)
SCE_WEBVIEW_NETWORK_ERROR_BAD_CONTENT_ENCODING	WV-33925-2	0x80E8003D	Unrecognized transfer encoding
SCE_WEBVIEW_NETWORK_ERROR_FILESIZE_EXCEEDED	WV-33926-3	0x80E8003F	Maximum file size exceeded
SCE_WEBVIEW_NETWORK_ERROR_SEND_FAIL_REWIND	WV-33927-4	0x80E80041	When doing a send operation curl had to rewind the data to re-transmit, but the rewinding operation failed.
SCE_WEBVIEW_NETWORK_ERROR_SSL_ENGINE_INITFAILED	WV-33928-5	0x80E80042	Failed to initialize SSL ENGINE
SCE_WEBVIEW_NETWORK_ERROR_SSL_CACERT_BADFILE	WV-33929-6	0x80E8004D	Could not load CA CERT file missing or wrong format.
SCE_WEBVIEW_NETWORK_ERROR_SSL_SHUTDOWN_FAILED	WV-33930-8	0x80E80050	Failed to shutdown SSL ENGINE
SCE_WEBVIEW_NETWORK_ERROR_AGAIN	WV-33931-9	0x80E80051	Error when some network data is lost.
SCE_WEBVIEW_NETWORK_ERROR_SSL_ISSUER_ERROR	WV-33932-0	0x80E80053	Issuer check failed. (Added in 7.19.0)
SCE_WEBVIEW_NETWORK_ERROR_CHUNK_FAILED	WV-33933-1	0x80E80058	Error when CRC check error is detected.
SCE_WEBVIEW_NETWORK_ERROR_GOT_NOTHING	WV-36350-7	0x80E80034	Nothing was returned from the server, and under the circumstances, getting nothing is considered an error.
SCE_WEBVIEW_SSL_X509_ERROR_UNABLE_TO_GET_ISSUER_CERT	WV-36351-8	0x80E81002
SCE_WEBVIEW_SSL_X509_ERROR_UNABLE_TO_GET_CR	WV-36352-9	0x80E81003
SCE_WEBVIEW_SSL_X509_ERROR_UNABLE_TO_DECRYPT_CERT_SIGNATURE	WV-36353-0	0x80E81004
SCE_WEBVIEW_SSL_X509_ERROR_UNABLE_TO_DECRYPT_CRL_SIGNATURE	WV-36354-1	0x80E81005
SCE_WEBVIEW_SSL_X509_ERROR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY	WV-36355-2	0x80E81006
SCE_WEBVIEW_SSL_X509_ERROR_CERT_SIGNATURE_FAILURE	WV-36356-3	0x80E81007
SCE_WEBVIEW_SSL_X509_ERROR_CRL_SIGNATURE_FAILURE	WV-36357-4	0x80E81008
SCE_WEBVIEW_SSL_X509_ERROR_CERT_NOT_YET_VALID	WV-36358-5	0x80E81009
SCE_WEBVIEW_SSL_X509_ERROR_CERT_HAS_EXPIRED	WV-36359-6	0x80E8100A
SCE_WEBVIEW_SSL_X509_ERROR_CRL_NOT_YET_VALID	WV-36360-8	0x80E8100B
SCE_WEBVIEW_SSL_X509_ERROR_CRL_HAS_EXPIRED	WV-36361-9	0x80E8100C
SCE_WEBVIEW_SSL_X509_ERROR_ERROR_IN_CERT_NOT_BEFORE_FIELD	WV-36362-0	0x80E8100D
SCE_WEBVIEW_SSL_X509_ERROR_ERROR_IN_CERT_NOT_AFTER_FIELD	WV-36363-1	0x80E8100E
SCE_WEBVIEW_SSL_X509_ERROR_ERROR_IN_CRL_LAST_UPDATE_FIELD	WV-36364-2	0x80E8100F
SCE_WEBVIEW_SSL_X509_ERROR_ERROR_IN_CRL_NEXT_UPDATE_FIELD	WV-36365-3	0x80E81010
SCE_WEBVIEW_SSL_X509_ERROR_OUT_OF_MEM	WV-36366-4	0x80E81011
SCE_WEBVIEW_SSL_X509_ERROR_DEPTH_ZERO_SELF_SIGNED_CERT	WV-36367-5	0x80E81012
SCE_WEBVIEW_SSL_X509_ERROR_SELF_SIGNED_CERT_IN_CHAIN	WV-36368-6	0x80E81013
SCE_WEBVIEW_SSL_X509_ERROR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY	WV-36369-7	0x80E81014
SCE_WEBVIEW_SSL_X509_ERROR_UNABLE_TO_VERIFY_LEAF_SIGNATURE	WV-36370-9	0x80E81015
SCE_WEBVIEW_SSL_X509_ERROR_CERT_CHAIN_TOO_LONG	WV-36371-0	0x80E81016
SCE_WEBVIEW_SSL_X509_ERROR_CERT_REVOKED	WV-36372-1	0x80E81017
SCE_WEBVIEW_SSL_X509_ERROR_INVALID_CA	WV-36373-2	0x80E81018
SCE_WEBVIEW_SSL_X509_ERROR_PATH_LENGTH_EXCEEDED	WV-36374-3	0x80E81019
SCE_WEBVIEW_SSL_X509_ERROR_INVALID_PURPOSE	WV-36375-4	0x80E8101A
SCE_WEBVIEW_SSL_X509_ERROR_CERT_UNTRUSTED	WV-36376-5	0x80E8101B
SCE_WEBVIEW_SSL_X509_ERROR_CERT_REJECTED	WV-36377-6	0x80E8101C
SCE_WEBVIEW_SSL_X509_ERROR_SUBJECT_ISSUER_MISMATCH	WV-36378-7	0x80E8101D
SCE_WEBVIEW_SSL_X509_ERROR_AKID_SKID_MISMATCH	WV-36379-8	0x80E8101E
SCE_WEBVIEW_SSL_X509_ERROR_AKID_ISSUER_SERIAL_MISMATCH	WV-36380-0	0x80E8101F
SCE_WEBVIEW_SSL_X509_ERROR_KEYUSAGE_NO_CERTSIGN	WV-36381-1	0x80E81020
SCE_WEBVIEW_SSL_X509_ERROR_UNABLE_TO_GET_CRL_ISSUER	WV-36382-2	0x80E81021
SCE_WEBVIEW_SSL_X509_ERROR_UNHANDLED_CRITICAL_EXTENSION	WV-36383-3	0x80E81022
SCE_WEBVIEW_SSL_X509_ERROR_KEYUSAGE_NO_CRL_SIGN	WV-36384-4	0x80E81023
SCE_WEBVIEW_SSL_X509_ERROR_UNHANDLED_CRITICAL_CRL_EXTENSION	WV-36385-5	0x80E81024
SCE_WEBVIEW_SSL_X509_ERROR_INVALID_NON_CA	WV-36386-6	0x80E81025
SCE_WEBVIEW_SSL_X509_ERROR_PROXY_PATH_LENGTH_EXCEEDED	WV-36387-7	0x80E81026
SCE_WEBVIEW_SSL_X509_ERROR_KEYUSAGE_NO_DIGITAL_SIGNATURE	WV-36388-8	0x80E81027
SCE_WEBVIEW_SSL_X509_ERROR_PROXY_CERTIFICATES_NOT_ALLOWED	WV-36389-9	0x80E81028
SCE_WEBVIEW_SSL_X509_ERROR_INVALID_EXTENSION	WV-36390-1	0x80E81029
SCE_WEBVIEW_SSL_X509_ERROR_INVALID_POLICY_EXTENSION	WV-36391-2	0x80E8102A
SCE_WEBVIEW_SSL_X509_ERROR_NO_EXPLICIT_POLICY	WV-36392-3	0x80E8102B
SCE_WEBVIEW_SSL_X509_ERROR_DIFFERENT_CRL_SCOPE	WV-36393-4	0x80E8102C
SCE_WEBVIEW_SSL_X509_ERROR_UNSUPPORTED_EXTENSION_FEATURE	WV-36394-5	0x80E8102D
SCE_WEBVIEW_SSL_X509_ERROR_UNNESTED_RESOURCE	WV-36395-6	0x80E8102E
SCE_WEBVIEW_SSL_X509_ERROR_PERMITTED_VIOLATION	WV-36396-7	0x80E8102F
SCE_WEBVIEW_SSL_X509_ERROR_EXCLUDED_VIOLATION	WV-36397-8	0x80E81030
SCE_WEBVIEW_SSL_X509_ERROR_SUBTREE_MINMAX	WV-36398-9	0x80E81031
SCE_WEBVIEW_SSL_X509_ERROR_APPLICATION_VERIFICATION	WV-36399-0	0x80E81032
SCE_WEBVIEW_SSL_X509_ERROR_UNSUPPORTED_CONSTRAINT_TYPE	WV-36400-3	0x80E81033
SCE_WEBVIEW_SSL_X509_ERROR_UNSUPPORTED_CONSTRAINT_SYNTAX	WV-36401-4	0x80E81034
SCE_WEBVIEW_SSL_X509_ERROR_UNSUPPORTED_NAME_SYNTAX	WV-36402-5	0x80E81035
SCE_WEBVIEW_SSL_X509_ERROR_CRL_PATH_VALIDATION_ERROR	WV-36403-6	0x80E81036
SCE_WEBVIEW_SSL_X509_ERROR_SSL_CN_CHECK	WV-36404-7	0x80E81064
SCE_NP_WEBAPI_SERVER_ERROR_HTTP_STATUS_CODE_503_SERVICE_UNAVAILABLE	WS-37504-9	0x82F001F7	PSN is undergoing maintenance // PSN is undergoing maintenance. Please try again later. You can check the status of the PSN here. (status code 503)
SCE_WEBVIEW_LOAD_ERROR_CANCELED	WV-37776-0	0x80E82000
SCE_WEBVIEW_LOAD_ERROR_BLOCKED	WV-37777-1	0x80E82001
SCE_WEBVIEW_LOAD_ERROR_CANNOT_SHOW_URL	WV-37778-2	0x80E82002
SCE_WEBVIEW_LOAD_ERROR_INTERRUPTED_FOR_POLICY_CHANGE	WV-37779-3	0x80E82003
SCE_WEBVIEW_LOAD_ERROR_CANNOT_SHOW_MIME_TYPE	WV-37780-5	0x80E82004
SCE_WEBVIEW_LOAD_ERROR_FILE_DOES_NOT_EXIST	WV-37781-6	0x80E82005
SCE_WEBVIEW_LOAD_ERROR_PLUGIN_WILL_HANDLE_LOAD	WV-37782-7	0x80E82006