Talk:Syscon Firmware

From PS3 Developer wiki
Jump to navigation Jump to search

LV1 - System Controller (SC) manager[edit source]

  • sc_mgr_get_srh (0x9001)
  • sc_mgr_set_srh (0x9002)
  • sc_mgr_encrypt (0x9003)
  • sc_mgr_decrypt (0x9004)
  • Init For VTRM (0x9005)
  • sc_mgr_get_region_data (0x9006)
  • sc_mgr_set_region_data (0x9007)
  • Set RTC (0x9008)
  • Get Time (0x9009)
  • Set Time (0x900A)
  • sc_mgr_read_eprom (0x900B)
  • sc_mgr_write_eprom (0x900C)
  • Init For Updater (0x900D)
  • sc_mgr_get_sc_status (0x900E)
  • sc_iso_header (sc_iso_sc_binary_patch - 0x9011)
  • SC RTC Factory (0x9012)
  • Correct RTC Factory (0x9013)
  • Set SC Status (0x9014)
  • Backup Root Info (0x9015)
  • Restore Root Info (0x9016)
  • Read System Data From SC EEPROM - Indi Info Manager 0x17007)

SC - sc_iso.self[edit source]

  • sc_iso_sc_binary_patch
  • sc_iso_get_sc_status
  • sc_iso_get_property
  • sb_iso_get_rnd
  • sb_iso_encdec_key
  • sc_iso_module::calculate_drift_time
  • sc_iso_module::generate_key
  • sc_iso_module::generate_all_key
  • sc_iso_module::authenticate
  • sc_iso_module::change_to_old_key
  • sc_iso_module::do_process
  • sc_iso_module::get_system_info
  • sc_iso_module::get_system_version
  • sc_iso_module::do_set_rtc_status
  • sc_iso_module::do_get_rtc_status
  • sc_iso_module::do_set_rtc2
  • sc_iso_module::set_rtc
  • sc_iso_module::do_set_drift_time
  • sc_iso_module::do_get_time
  • sc_iso_module::set_time
  • sc_iso_module::get_time
  • sc_iso_module::read_data2
  • sc_iso_module::write_data2
  • sc_iso_module::write_binary_patch
  • sc_iso_module::read_data
  • sc_iso_module::write_data
  • sc_iso_module::write_region_data
  • sc_iso_module::set_region_data
  • sc_iso_module::write_srh
  • sc_iso_module::set_srh
  • sc_iso_module::write_key
  • sc_iso_module::write_mngblk
  • sc_iso_module::initialize_updater_block
  • sc_iso_module::read_region_data
  • sc_iso_module::get_region_data
  • sc_iso_module::get_srh
  • sc_iso_module::read_key
  • sc_iso_module::do_crypt
  • sc_iso_module::decrypt
  • sc_iso_module::encrypt
  • sc_iso_module::read_mngblk
  • sc_iso_module::set_sc_status
  • sc_iso_module::get_sc_status
  • sc_iso_module::init_for_updater
  • sc_iso_module::init_for_vtrm
  • sc_iso_module::start

This should be a good starting point but leaves enough to explore yourself though: http://pastebin.com/NxVkGCdp (for version 1.02)

See Graf's PSGroove Payload and Hypervisor_Reverse_Engineering #SC_Manager, #System_Controller

Updater log lines related to syscon[edit source]

Updater log lines related to Syscon just after BD firmware, Multi-Card controller, BlueTooth firmware (in this case CEX 3.55) just before post processing and cleanup update status : 

Update System controller firmware
read SC patch package (4864 bytes) elapsed = 3 msec
read SC patch package (4864 bytes) elapsed = 3 msec
read SC patch package (4864 bytes) elapsed = 3 msec
read SC patch package (4864 bytes) elapsed = 2 msec
read SC patch package (4864 bytes) elapsed = 2 msec
read SC patch package (4864 bytes) elapsed = 3 msec
read SC patch package (4864 bytes) elapsed = 2 msec
read SC patch package (4864 bytes) elapsed = 3 msec
Update System controller firmware done(0x8002f000)

PS3 Retail == PS3 TEST != PS3 TOOL I try to get PS3 TOOL SC Firmwares.

It is suggested that the Syscon EEPROM is 512KB and the full (encrypted) firmware is <400KB (on Ref.Tool the Syscon is updated by overwiting the whole Syscon firmware : e.g. v1.0.5c1_TMU510_u.bin 384KB)

Syscon commands[edit source]

Syscon commands: 

ver
errlog
auth1
auth2
fandiag
xdrdiag
xiodiag
bestat
sysdiag
syslog

bringup (PowerOn State)
shutdown (PowerOff State)
powersw
resetsw
bootbeep
stat
bootbeep on BOOT BEEP ON: DONE
bootbeep off BOOT BEEP OFF: DONE
xdrdiag
start
errlog tmpforcp
cp beepremote
cp beep2kn1n3
cp beep2kn2n3 /usr/bin/sx
halt HALT: OK
version
firmud Done.
cp ready CP READY: OK
cp busy CP BUSY: OK
cp reset CP RESET: OK
bestat
xdrdiag info
xdrdiag result
xiodiag
fandiag 
diagnose

The diag commands are usually for the backup bank, the main only supports firmud

CP root pass on Ref.Tool: cytology

sc auth keys old[edit source]

sc auth keys old:
See: Keys#sc_iso

sc auth key seeds:
auth_1_0x00: 63DCA7D3FEE47F749A408363F1104E8F
auth_2_0x00: 4D10094324009CC8E6B69C70328E34C5
auth_1_0x01: D97949BAD8DA69D0E01BF31523732832
auth_2_0x01: C9D1DD3CE27E356697E26C12A7B316A8
auth_1_0x06: 4420ED722FEA35021955AB40C78EE6DF
auth_2_0x06: 3E67C2D9432E15D09BEF0E6C6492455D
the new auth keys are generated involving 256bit aes encryption (iv is all zeroes)

dump sysrom[edit source]

dump_sysrom.pkg of dump-flash+syscon.rar (280.51 KB) (http://git.gitbrew.org/ps3/?p=otheros-utils/dump_sysrom.git) seems to output wrong on MFW315: 

 Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
 00000000  FF FF FF FF 80 01 00 03 FF FF FF FF 80 01 00 03  ÿÿÿÿ€...ÿÿÿÿ€...
 00000010  FF FF FF FF 80 01 00 03 FF FF FF FF 80 01 00 03  ÿÿÿÿ€...ÿÿÿÿ€...
 ...   ...   ...   
 0003FFE0  FF FF FF FF 80 01 00 03 FF FF FF FF 80 01 00 03  ÿÿÿÿ€...ÿÿÿÿ€...
 0003FFF0  FF FF FF FF 80 01 00 03 FF FF FF FF 80 01 00 03  ÿÿÿÿ€...ÿÿÿÿ€...

Updating Syscon on Tool/DECR[edit source]

Q: How is syscon updated on Reference Tool / DECR models?
There are no syscon PKG's in the DECR PUPs and CP .bin file contains one large binary encrypted gibberish. it is suggested it uses full syscon updates, but how are files like "v1.0.5c1_TMU510_u.bin" send to syscon for updating? With/via Communication Processor?

A: In DECR-1000A Syscon is located on the motherboard. The Communication Processor talks to it through UART and updates it with the firmud command.

  • List of main IC's on the motherboard:
  • List of main IC's on the CP board:
    • 1x Samsung K9F2G08U0M (Flash)
    • SCEI CXD9790GG (?) "helps handle communication between the Communication Processor, and the system controller, and southbridge. Using this path, the CP can talk to the System Controller, and bring the system up, down, and change its boot settings."
    • Etc...

archaic source1 archaic source2

The SysCon Bootloader[edit source]

  • This is what the BL does at startup (DECR). One of these flags could enable JTAG
--- BL
*0x3100004 = 0x03
Check 0x3101080 & 1
*0x3803000 = 0x1020000 or 0x1001000
*0x3803004 = 0x00
*0x3803008 = 0x18000 or 0x8000
*0x3803044 = 0x00
*0x380300C = 0x2CC001
*0x3803040 = 0x01
*0x3800004 = 0x02

*0x310FFFC = 0xFFFF

--- FW
*0x3100004 = 0x03
*0x3100008 = 0x0A
*0x3100008 = 0x03
*0x3100020 = 0x86
*0x3100028 = 0x10
WAIT 152 cycles
*0x3100010 = 0x01
*0x3100008 = 0x0A
*0x3100008 = 0x06
*0x3100004 = 0x00

*0x3808070 = 0x00
*0x3808064 = 0x0F

*0x3005404 = 0x0C67
*0x3005400 = 0x0C

Syscon patches template[edit source]

This template started as something experimental, eventually could be refurbished to use it in the frontpage

Syscon Patches
[edit]
PS3 Model PS3 Type Motherboard Syscon Hardware SoftID.SysconPatch@SC Syscon Firmware Patches Notes
File Name Version Installed from
DECR-1000 0x01 TMU-520 CXR713F120A 0F3B.0000000000000000@SC v1.0.5c1_TMU510_u.bin v1.0.5 c 1 CP ver 1.33 Full firmware overwrite from Communication Processor
DEH-H1001-D 0x01 COOKIE-13 CXR713F120A 0B67.0000000000000000@SC n/a n/a n/a
DEH-H1000A 0x01 COK-001 (proto) CXR713F120A 0B67.0000000000000000@SC n/a n/a n/a
CECHAxx 0x01 COK-001 CXR713120 series 0B8E.0001000000000004@SC
0B8E.0001000000000005@SC
0B8E.0001000000000006@SC		 SYS_CON_FIRMWARE_01000004.pkg
SYS_CON_FIRMWARE_01000005.pkg
SYS_CON_FIRMWARE_01000006.pkg		 v1.0.0 release 4
v1.0.0 release 5
v1.0.0 release 6		 1.30 Firmware
1.81 Firmware
3.40 Firmware
CECHBxx 0x02
CECHCxx 0x03 COK-002 0C16.0001000100030002@SC
0C16.0001000100030003@SC		 SYS_CON_FIRMWARE_01010302.pkg
SYS_CON_FIRMWARE_01010303.pkg		 v1.1.3 release 2
v1.1.3 release 3		 1.81 Firmware
3.40 Firmware
CECHExx 0x04
CECHGxx 0x05 SEM-001 0D52.0001000200030002@SC SYS_CON_FIRMWARE_01020302.pkg v1.2.3 release 2 3.40 Firmware
CECHHxx 0x06 DIA-001 CXR714120 series 0DBF.0001000300030002@SC SYS_CON_FIRMWARE_01030302.pkg v1.3.3 release 2 3.40 Firmware
CECHJxx 0x07 DIA-002 0E69.0001000400040001@SC
0E69.0001000400040002@SC		 n/a
SYS_CON_FIRMWARE_01040402.pkg		 v1.4.4 release 1
v1.4.4 release 2		 Factory ?
3.40 Firmware
CECHKxx
DECR-1400 0x09 DEB-001 CXR713120 series 0E69.0001000400040001@SC n/a v1.4.4 release 1 Factory ?
CECHCxx 0x03 COK-002 with 65nm RSX CXR714120 series 0F29.0001000500000002@SC SYS_CON_FIRMWARE_01050002.pkg v1.5.0 release 2 3.40 Firmware Refurbished, new 65nm RSX, new syscon
CECHAxx 0x01 COK-001 with 40nm RSX CXR714120 series 0F38.0001000500010001@SC SYS_CON_FIRMWARE_01050101.pkg v1.5.1 release 1 3.41 Firmware Refurbished, new 40nm RSX, new syscon
CECHLxx 0x08 VER-001 SW-30x series 065D.0000000000000000@SC n/a n/a Factory No patches availables in System Firmware
CECHMxx
CECHPxx
CECHQxx
CECH-20xx 0x09 DYN-001 SW2-30x series 0832.00010002083E0832@SC SYS_CON_FIRMWARE_S1_00010002083E0832.pkg ??? 3.00 Firmware
CECH-21xx 0x0A SUR-001 08A0.0000000000000000@SC n/a n/a Factory No patches availables in System Firmware
CECH-25xx 0x0B JTP-001 or
JSD-001		 08C2.0000000000000000@SC n/a n/a Factory No patches availables in System Firmware
CECH-30xx 0x0C KTE-001 SW3-30x series 0918.0000000000000000@SC n/a n/a Factory No patches availables in System Firmware
CECH-40xx 0x0D MSX-001 or
MPX-001 or
NPX-001		 SW3-30x series 098F.0000000000000000@SC n/a n/a Factory No patches availables in System Firmware
CECH-42xx ? ? ? ? ? ? ? No patches availables in System Firmware
CECH-43xx ? ? ? ? ? ? ? No patches availables in System Firmware
Rows marked in grey are "reference tool" models
Rows marked in blue are "preproduction" models
Rows marked in red are "refurbished" models


NonRetail syscon[edit source]

Remember, Debug/DEX consoles are normal retail consoles with different TargetID, so only those that have a nonretail board have deviating patches (like the CXR713F120A found on the DECR-1000A TOOL/DECR).

Tool/DECR don't have patches, they flash entire firmwares.

Factory cp comes with 0.8.8 (corresponds to syscon fw size 0x60000)
it is VERY likely that it is not possible to go below this point, so any smaller size would likely cause a brick (see Talk:Communication_Processor for more info on how to downgrade)

DECR samples: [1] mirror:
v0.6.1c8_TMU510_u.bin  | CRC16:FAE0 | CRC32:590D9A21 | SHA1:DC8AEA0DDC6C5B813FE9861C972AAE111DA6FCAB | MD5:50794942BD9FAB7CC04A81BD8D220BA1 | 7379733103B15C07EC051E9B44D90BDF 07AD575D86B3937CFA8B3D331BE958DDB40EDFBE
v0.6.10c4_TMU510_u.bin | CRC16:B58A | CRC32:DB8A00BF | SHA1:5D52289960151E2543EBEAA805963B7B88C35DD8 | MD5:14C288A576690C587E95C8542EDC2A70 | 7379733160AF70F9CF5DF54F30D5C77C 5F360CD146EEC3A7B5026151C396C4A5F7F1EC91
v0.6.11c4_TMU510_u.bin | CRC16:8A51 | CRC32:289B15F3 | SHA1:D45214E907A104BCC6BC91D78B7B471263AB0699 | MD5:B7CFA6536329F0DFF1AAD7905627F15F | 73797331F283602B666562012850612E 3FABA6E4FE1D70724164A23886199F36A02EDB0D
v0.6.12c5_TMU510_u.bin | CRC16:31B2 | CRC32:1A1F141B | SHA1:403BF55314C4E785ED90D03A8F2E90B67CC235EA | MD5:1B19B55924445E4BBB2D970410AD6366 | 737973316E5C037615E4727464B2D929 2D2EB7DADEF6B24C4E959235E5B11917D352F9D5
v0.6.14c4_TMU510_u.bin | CRC16:FB1B | CRC32:079EF389 | SHA1:6EF7067FAD939D0B0DFC0B9418A6F4C7509104E5 | MD5:11E9F6270A5D79D0B76614B1C6FE622B | 73797331DCEAC9FA0F1B2449F332C4A9 1CBFF6FE43BDCA3B0A5AAFCE9A98D7176D951A49
v0.8.4c8_TMU510_u.bin  | CRC16:2949 | CRC32:81EFA508 | SHA1:5963B333361123782848E3639D9FA585A728691A | MD5:564D5479F5B98E244C1EA7B56BACC873 | 73797331E8A9ADD15036B33AB8E8AB17 FDCC981DA58B9F44E9331C9708C01D924D78DB3E
v0.9.9c1_TMU510_u.bin  | CRC16:172A | CRC32:EBB2D78A | SHA1:D5E693D2E22FD99CF3E330AC442CD9B07D01DB66 | MD5:216B258115F25B13C9969AF35BFCAC20 | 7379733116E6DD5F054442FACFA15A5C 5E62E8FC8059F864A91CAD142BC30BDAE77D9464
v0.9.14c1_TMU510_u.bin | CRC16:2A2C | CRC32:330CB685 | SHA1:30B19BB8B78E60D81848E8FDF6C4A79537CFBE66 | MD5:7AA5BFE64D15F8BD61EB80B999FE4343 | 73797331807BAF3D6E1B6A3CA5FDF30D 7CCE3B0E739A19C9C431D4D8C59CF1513DAF25E9
v1.0.1c1_TMU510_u.bin  | CRC16:3FD1 | CRC32:A7C7E313 | SHA1:F0DCA7130074E023FFAF58EBD06A61EE73C94907 | MD5:C95C57DC20D9AC5473C1EC914744352F | 73797331F362AE579EA3D864E27334CC 3EAB05DEC5328E885EED3295954999BD518ABFDF
v1.0.3c1_TMU510_u.bin  | CRC16:636E | CRC32:32942DFD | SHA1:83BE56F92A93B911D2BBE12DD1F6AF9CCD1EC11B | MD5:642C0E6615AACBF180C367F7927D1E30 | 737973312D08051E9F5AA1AAF2647EC0 44EE5DF74D92DDB81B1099430B0B5A243FFDA44E
v1.0.4c1_TMU510_u.bin  | CRC16:528F | CRC32:A0FBA694 | SHA1:1A5E5F97D66A754C2C7436618DC911C1C57B9FEA | MD5:6641B03FC6193E35380D681152226275 | 73797331E40325B060CDE461D250058D 8AF478F0A1C1B4B9DECA01C8770F8A9010F0A513
v1.0.5c1_TMU510_u.bin  | CRC16:59F8 | CRC32:87316EBF | SHA1:8ED74829973F740C1B825FD976F7926A95ACBE8B | MD5:717DC4187A6E446C30DACAC129090656 | 737973316856FC96CA6FA4D4652D4985 F9E998439D4C23DA9C1BA8F5C44611D826DA1CFE

dev/hda[edit source]

dev_hda.image from DECR-1000A CP: dev_hda.image dev_hda.image.7z

Partitions[edit source]

device file size type
/dev/loop0p1 51 MB (50577408 bytes) 0x89
/dev/loop0p2 8,7 MB (8650752 bytes) Linux
/dev/loop0p3 32 MB (31981568 bytes) Linux
/dev/loop0p4 35 MB (35127296 bytes) Extended
/dev/loop0 4,9 MB (4883968 bytes) Unassigned

Syscon UART commands available on Cytology and Cookie (internal Mullion)[edit source]

Command v0.4.5_b4 v0.6.1_c8 v0.6.10_c4 v0.6.11_c4 v0.6.12_c5
v0.6.12_c7		 v0.6.14_c4 v0.8.4_c8 v0.9.9_c1
v0.9.14_c1
v1.0.1_c1		 v0.9.13_k1
v1.0.0_k1
?v1.1.3_k1?		 v1.0.3_c1
v1.0.4_c1
v1.0.4_c2
v1.0.5_c1		 ?v1.2.3_k1?
v1.3.3_k1
v1.4.4_k2
?v1.5.0_k2?
v1.5.1_k2		 Protected?
w NO YES YES YES YES YES YES YES YES YES YES YES
r NO YES YES YES YES YES YES YES YES YES YES YES
w16 NO YES YES YES YES YES YES YES YES YES YES YES
r16 NO YES YES YES YES YES YES YES YES YES YES YES
w32 NO YES YES YES YES YES YES YES YES YES YES YES
r32 NO YES YES YES YES YES YES YES YES YES YES YES
w64 NO YES YES YES YES YES YES YES YES YES YES YES
r64 NO YES YES YES YES YES YES YES YES YES YES YES
r64d NO YES YES YES YES YES YES YES YES YES YES YES
wbe NO YES YES YES YES YES YES YES YES YES YES YES
rbe NO YES YES YES YES YES YES YES YES YES YES YES
boardconfig NO YES YES YES YES YES YES YES NO YES NO YES
comm NO YES YES YES YES YES YES YES NO YES NO YES
commt NO YES YES YES YES YES YES YES NO YES NO YES
printmode NO YES YES YES YES YES YES YES NO YES NO YES
eepromcheck NO YES YES YES YES YES YES YES NO YES NO YES
eeprominit NO YES YES YES YES YES YES YES NO YES NO YES
memtest NO NO NO YES YES YES YES NO NO NO NO YES
targethw NO YES YES YES YES YES YES NO NO NO NO YES
hdmi NO YES YES YES YES YES YES YES YES YES YES YES
xrcv NO YES YES YES YES YES YES YES NO YES NO YES
bepkt NO YES YES YES YES YES YES YES NO YES NO YES
task NO YES YES YES YES YES YES YES YES YES YES YES
duty NO YES YES YES YES YES YES YES YES YES YES YES
tsensor NO YES YES YES YES YES YES YES YES YES YES YES
bepgoff NO YES YES YES YES YES YES YES NO YES NO YES
getrtc NO YES YES YES YES YES YES YES YES YES YES YES
rtcreset NO YES YES YES YES YES YES YES NO YES NO YES
ledmode NO NO NO NO NO NO YES YES NO YES NO YES
buzzpattern NO NO NO NO NO NO YES YES NO YES NO YES
eepcsum NO NO NO NO NO NO NO YES YES YES YES YES
tmp NO YES YES YES YES YES YES YES YES YES YES YES
trp NO YES YES YES YES YES YES YES YES YES YES YES
hyst NO NO YES YES YES YES YES YES YES YES YES YES
tshutdown NO YES YES YES YES YES YES YES YES YES YES YES
tzone NO YES YES YES YES YES YES YES YES YES YES YES
errlog NO NO NO NO NO NO YES YES YES YES YES NO
lasterrlog NO NO NO NO NO NO YES YES YES YES YES YES
geterrlog NO NO NO NO NO NO YES YES YES YES YES YES
clearerrlog NO NO NO NO NO NO YES YES YES YES YES YES
stoplogerrtask NO NO NO NO NO NO YES YES YES YES YES YES
startlogerrtask NO NO NO NO NO NO YES YES YES YES YES YES
stoplogerrtoeep NO NO NO NO NO NO YES YES YES YES YES YES
restartlogerrtoeep NO NO NO NO NO NO YES YES YES YES YES YES
trace NO YES YES YES YES YES YES YES YES YES YES YES
disp_err NO YES YES YES YES YES YES YES YES YES YES YES
clear_err NO YES YES YES YES YES YES YES YES YES YES YES
print_patch NO NO NO NO NO YES YES NO NO NO NO YES
printpatch NO NO NO NO NO NO NO YES YES YES YES YES
patchverram NO NO NO NO NO YES YES YES YES YES YES YES
patchcsum NO NO NO NO NO NO NO YES YES YES YES YES
patchvereep NO NO NO NO NO YES YES YES YES YES YES YES
portscan NO YES YES YES YES YES YES YES YES YES YES YES
powupcause NO YES YES YES YES YES YES YES YES YES YES YES
syspowdown NO YES YES YES YES YES YES YES YES YES YES YES
powbtnmode NO NO NO YES YES YES YES YES NO YES NO YES
dve NO YES YES YES YES YES YES YES NO YES NO YES
fanconpolicy NO YES YES YES YES YES YES YES YES YES YES YES
fanconmode NO YES YES YES YES YES YES YES YES YES YES YES
fanconautotype NO NO YES YES YES YES YES YES YES YES YES YES
fantbl NO YES YES YES YES YES YES YES YES YES YES YES
fanservo NO NO YES YES YES YES YES YES YES YES YES YES
thrm NO NO YES YES YES YES YES YES YES YES YES YES
thalttest NO YES YES YES YES YES YES YES YES YES YES YES
tshutdowntime NO NO YES YES YES YES YES YES YES YES YES YES
fanpol NO NO YES YES YES YES YES YES YES YES YES YES
thermfatalmode NO NO NO NO NO NO NO YES YES YES YES YES
becount NO NO YES YES YES YES YES YES YES YES YES YES
wmmto NO NO YES YES YES YES YES YES NO YES NO YES
ltstest NO NO NO NO YES YES YES YES YES YES YES YES
fancon NO NO NO YES YES YES YES YES YES YES YES YES
powerstate NO NO NO NO YES YES YES YES YES YES YES YES
devpm NO NO NO NO YES YES YES YES YES YES YES YES
wrsxc NO NO NO NO YES YES YES YES YES YES YES YES
rrsxc NO NO NO NO YES YES YES YES YES YES YES YES
faninictrl NO NO NO NO YES YES YES YES YES YES YES YES
therrlcr NO NO NO NO NO NO YES YES YES YES YES YES
poll NO YES YES YES YES YES YES YES YES YES YES YES
recv NO YES YES YES YES YES YES YES YES YES YES YES
send NO YES YES YES YES YES YES YES YES YES YES YES
LS NO YES YES YES YES YES YES YES YES YES YES YES
hversion NO YES YES YES YES YES YES YES YES YES YES YES
bstatus NO YES YES YES YES YES YES YES YES YES YES YES
buzz NO YES YES YES YES YES YES YES NO YES NO YES
diag NO YES YES YES YES YES YES YES NO YES NO YES
xdrdiag NO NO NO NO NO NO NO YES NO YES NO NO
xiodiag NO NO NO NO NO NO NO YES NO YES NO NO
fandiag NO NO NO NO NO NO NO YES NO YES NO NO
osbo NO NO NO NO NO NO NO YES NO YES NO NO
scopen NO YES YES YES YES YES YES YES YES YES YES NO
scclose NO YES YES YES YES YES YES YES YES YES YES NO
scasv2 NO NO NO NO NO NO YES YES YES YES YES YES
scagv2 NO NO NO NO NO NO YES YES YES YES YES NO
bestat NO YES YES YES YES YES YES YES YES YES YES NO
bringup NO YES YES YES YES YES YES YES YES YES YES NO
shutdown NO YES YES YES YES YES YES YES YES YES YES NO
powersw NO YES YES YES YES YES YES YES YES YES YES NO
resetsw NO YES YES YES YES YES YES YES YES YES YES NO
ejectsw NO NO NO NO NO NO YES YES YES YES YES NO
btnemus NO NO NO NO NO NO NO NO NO NO YES YES
btnemua NO NO NO NO NO NO NO NO NO NO YES YES
bsn NO YES YES YES YES YES YES YES YES YES YES NO
firmud YES YES YES YES YES YES YES YES YES YES YES NO
hdmiid NO YES YES YES YES YES YES YES YES YES YES YES
hdmiid2 NO NO NO YES YES YES YES YES YES YES YES YES
version YES YES YES YES YES YES YES YES YES YES YES NO
revision NO YES YES YES YES YES YES YES YES YES YES NO
csum NO NO NO NO NO NO YES YES YES YES YES NO
cp NO YES YES YES YES YES YES YES NO YES NO NO
halt NO YES YES YES YES YES YES YES NO YES NO NO
bootbeep NO NO NO NO NO NO NO NO NO YES NO NO
nonfatalerror NO NO NO NO NO NO NO NO NO NO YES YES

Sherwood patch name versioning and SoftID[edit source]

For a backtrack of this talk see the section named "sherwood names format" at the end of this edit, the request for a confirmation here, and the answer here

The patch naming and versioning for mullion is straightforward, both the value displayed in the More System Information screen and the PKG filename itself contains the 4 integer values of the: "major version", "minor version", "major revision", and "minor revision" that appears in the header of the decrypted patch structure Syscon Firmware#Mullion Patch Content. Filename SYS_CON_FIRMWARE_01010303.pkg is patch v1.1.3.3. But we cant apply the same rules for sherwood
The only official patch filename sample we have for sherwood is SYS_CON_FIRMWARE_S1_00010002083E0832.pkg. There are many photos in the Talk:More System Information where can be seen that is displayed as 0832.00010002083E0832@SC
The first 2 integers seems to follow the rules for mullion ("major version" and "minor version") and indicates v1.2... but it seems the base firmware is 1.11... so im wondering if the patch "updates" the firmware to 1.2 (base firmware v1.11 overlayed with the patch becomes v1.2)
The last 2 values are the most weird, but also the most interesing, the 0832 is the SoftID of the real base firmware... and im wondering if after applying the patch it becomes 083E. Note both values are very close to each other, the algorythm used by syscon to calculate checksums makes them similar if we change only a few bytes as can be seen when playing around with the "eepcsum" command
Long story short... im wondering if all the SoftID's are checksums of the base syscon firmware build (not counting the EEPROM areas used for per-console configurations as the "platform config" area or others). And for sherwoods is also a checksum of the resulting data after applying the patch (so in this case is a checksum based in the data in syscon RAM), the header of the decrypted patch structure for sherwoods changed Syscon Firmware#Sherwood Patch Content and includes 2 new values "data checksum" (the checksum of the syscon base firmware = SoftID before aplying the patch ?), and "patch checksum" (the checksum of the syscon base firmware overlayed with the patch data = SoftID after aplying the patch ?)
So the filename for sherwoods is "major version" (of the patched data), "minor version" (of the patched data), "patch checksum" (of base firmware + patch), "data checksum" (of base firmware) --Sandungas (talk) 19:32, 1 May 2021 (UTC)

Syscon doesn't use the PatchID internally - I guess it's just saved in the patch header for identification purposes. The only thing it's checking is the SoftID.
The SoftID (I call it BuildID) is incremental (see here), like for example the build id.
The checksums in the Sherwood patch are just for the data saved in the patch (for "integrity" = bad crypto reasons), the HDMI patch on the Mullion syscon does also have a checksum.
M4j0r (talk) 19:46, 1 May 2021 (UTC)

Device list[edit source]

Mullion firmware versions: v1.0.0_k1, v1.1.3_k1, v1.2.3_k1, v1.3.3_k1 (the list is identical in all this syscon firmware versions) 

Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00000000  55 53 42 20 00 41 43 2F 44 43 20 00 32 6E 64 20  USB .AC/DC .2nd 
00000010  48 44 44 20 00 31 73 74 20 48 44 44 20 00 47 62  HDD .1st HDD .Gb
00000020  45 20 00 47 44 44 52 33 20 56 52 20 00 42 45 20  E .GDDR3 VR .BE 
00000030  56 52 20 00 58 44 52 20 56 52 20 00 52 53 58 20  VR .XDR VR .RSX 
00000040  56 52 20 00 45 45 2B 47 53 20 00 6D 69 73 63 20  VR .EE+GS .misc 
00000050  00 49 4F 49 46 30 20 74 72 61 63 65 20 00 49 4F  .IOIF0 trace .IO
00000060  49 46 31 20 74 72 61 63 65 20 00 58 49 4F 20 74  IF1 trace .XIO t
00000070  72 61 63 65 20 00 41 69 72 20 49 6E 74 61 6B 65  race .Air Intake
00000080  20 00 69 6E 73 69 64 65 20 63 68 61 73 69 73 20   .inside chasis 
00000090  00 42 44 20 53 65 63 6F 6E 64 61 72 79 20 00 42  .BD Secondary .B
000000A0  44 20 50 72 69 6D 61 72 79 20 00 31 73 74 20 42  D Primary .1st B
000000B0  45 20 50 72 69 6D 61 72 79 20 00 58 44 52 20 50  E Primary .XDR P
000000C0  72 69 6D 61 72 79 20 00 52 53 58 20 50 72 69 6D  rimary .RSX Prim
000000D0  61 72 79 20 00                                   ary .

Sherwood firmware version: v0.17.0 (only)
The strings was reorganized, and was added "SB" 

Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00000000  31 73 74 20 42 45 20 50 72 69 6D 61 72 79 20 00  1st BE Primary .
00000010  52 53 58 20 50 72 69 6D 61 72 79 20 00 58 44 52  RSX Primary .XDR
00000020  20 50 72 69 6D 61 72 79 20 00 42 45 20 56 52 20   Primary .BE VR 
00000030  00 52 53 58 20 56 52 20 00 47 44 44 52 33 20 56  .RSX VR .GDDR3 V
00000040  52 20 00 58 44 52 20 56 52 20 00 41 43 2F 44 43  R .XDR VR .AC/DC
00000050  20 00 42 44 20 50 72 69 6D 61 72 79 20 00 42 44   .BD Primary .BD
00000060  20 53 65 63 6F 6E 64 61 72 79 20 00 41 69 72 20   Secondary .Air 
00000070  49 6E 74 61 6B 65 20 00 69 6E 73 69 64 65 20 63  Intake .inside c
00000080  68 61 73 69 73 20 00 58 49 4F 20 74 72 61 63 65  hasis .XIO trace
00000090  20 00 49 4F 49 46 30 20 74 72 61 63 65 20 00 49   .IOIF0 trace .I
000000A0  4F 49 46 31 20 74 72 61 63 65 20 00 47 62 45 20  OIF1 trace .GbE 
000000B0  00 55 53 42 20 00 6D 69 73 63 20 00 31 73 74 20  .USB .misc .1st 
000000C0  48 44 44 20 00 32 6E 64 20 48 44 44 20 00 53 42  HDD .2nd HDD .SB
000000D0  20 00 45 45 2B 47 53 20 00                        .EE+GS .

Sherwood firmware version: v1.11.0 (or newer)
All the strings was removed, except 2 of them 

Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00000000  31 73 74 20 42 45 20 50 72 69 6D 61 72 79 00 52  1st BE Primary.R
00000010  53 58 20 50 72 69 6D 61 72 79 00                 SX Primary.
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Talk:Syscon_Firmware&oldid=66613"