DECR-1000

DECR-1000(A/J)

Specifications

SubModels	DECR-1000A / DECR-1000J
Type	0x01
Motherboard	TMU-520
Flash Storage	2x 256MB NAND
CELL BE / RSX	90nm / 90nm
South Bridge	CXD2973AGB-4
Syscon	CXR713F120A
CP	CXD9790GG TCP-520
BDemu Harddrive	400GB
GameOS Harddrive	400GB
Bluray Drive	YES
HDMI Ports	2
OtherOS	NO
USB Ports	6
GbLAN Ports	4 (1 for debugger)
Serial Ports	1 (Hidden next to LAN(DEV) lan port, used in SYSCON emergency updates)
Flash Readers	Yes
PS2 mode	NO (No Emotion Engine or Graphic Synthesizer on the motherboard, no ps2emu software in the official firmware)
PS1 mode	NO (No ps1emu software in the official firmware)
SA-CD	NO (The Bluray Drive is compatible but no software exists to play the discs in Official Reference Tool firmwares)
WiFi802.11b/g	YES
SKU Release date	2006
SDK / Firmware support	=>1.0.0 =>1.6.0 when refurbished/serviced (RSX rom version isn't supported on older hypervisor)   or =>2.3.0 (Since Jan 2009)
downgradeable Min. praxis	0.08
Other	contains prototype components, hardware is the same as the DEH-R1040.
Power Supply	nichihon ZSSR541iB input: AC 100-240V 9.5-4A 50/60Hz (950-960 Watt) output: DC+5V(Sub) 1.6A (8 W) DC+3.3V 23A (75.9 W) DC+5V 8.2A (41 W) DC+12V 31.2A (374.4 W)

Boards

Motherboard

TMU-520 1-871-645-11, 1-871-645-12, 1-871-645-13 - Mainboard

SubBoards

BMD-001 1-871-575-11 - Blu-ray drive controller board
TAM-520 1-871-636-11 - Analog 4-ch. audio output
TAV-520 1-871-635-11 - Analog AV out
TBP-520 1-871-644-11 - Backplane for 2x SATA HDD + BD
TCP-520 1-871-646-11 - Communication Processor board
TEJ-520 1-871-641-11 - HDD Activity/Eject board
TFL-520 1-871-638-11 - Front Panel LEDboard (GPI/GPO/Reset/Start...)
TFP-520 1-871-640-11 - Front Panel Switchboard (GPI/GPO/Reset/Start...)
TMR-520 1-871-647-11 - CP-helper board
TMW-520 0-347-825-02 - Bt/Wifi board
TSA-520 1-871-639-11 - BD PATA->SATA adapter
TUU-520 1-871-643-11 - Front I/O (Foot-Sw/USB/CardReader)

Pictures

• 

  DECR1000A - frontleft

• 

  DECR1000A - front

• 

  DECR1000A - topback

• 

  DECR1000A - controller top

• 

  DECR1000A - controller back

• 

  DECR1000A - back

• 

  DECR1000A - back label

• 

  DECR1000A - bottom

• 

  DECR1000A - front

• 

  DECR1000A - front0

• 

  DECR1000A - front1

• 

  DECR1000A - front2

• 

  DECR1000A - front3

• 

  DECR1000A - front4

• 

  DECR1000A - bottomlabel powerrating

• 

  DECR-1000A - Nichicon ZSSR541iB 1-474-032-21 Power Supply labeling

Links

Overview and the detailed explaination in French
Pictures of the DECR-1000A boards
Instruction Manual
https://fccid.io/AK8DEHR1000
https://fccid.io/pdf.php?id=686154

Comparison

Model	Type	Board	Flash	SB	Syscon	CP	BDemu HDD	GameOS HDD	Bluray Drive	HDMI Ports	OtherOS	CELL BE	RSX	USB Ports	GbLan Ports	Flash Readers	Support: PSP PS2 PS1	SA- CD	WiFi 802.11 b/g	SKU Release date	SDK/FW support	downgradeable Min. praxis	Other
DECR-1000(A/J)	0x01	TMU-520	2x 256MB NAND	CXD2973AGB-4	CXR713F120A	TCP-520	400GB	400GB	?0x00?	2 (NO CEC)	NO	90nm	90nm	4 + 2 extra	4 (1 for dbg.)	YES	?YES? NO NO	NO	YES	2006	=>1.0.0 or =>2.3.0 (since 1/2009)	0.08	contains prototype components, hardware is identical to DEH-R1040 with a different label/model name.
DECR-1400A/J	0x09	DEB-001	1x 16MB NOR	CXD2984AGB	CXR714120-302GB	(via SB)	-	160 GB	?0x0A?	1 (NO CEC)	PARTIAL	45nm	65nm	4	2 (1 for dbg.)	NO	?YES? NO NO	NO	YES	6/2009	=>2.6.0	=>2.60	same case as retail PS3

Differences between the 1000 and 1400:

• DECR-1000:
  • Gb-DEVLAN is connected to the Communication Processor
  • With a pre (or equal to) 0.85.010 bootrom you do have two HDMI outputs.
  • Not all DECR-1000 are equal! Despite Sony's documentation claiming otherwise, DECR-1000 units with RSX rom version b07 and above such as refurbished/serviced units (and perhaps some others that have not been encounter) are not capable of running any firmware lower than 1.60 (from sdk 160.008) this is because the rom version is unknown/unsupported in older lv1 which will fail to initialize the RSX hardware and will cause lv1 to output a "rsx rom abort!" message, this will in turn create an exception early in lv2 boot process as it tries to use the RSX and creates a hard brick several RSX related errors such as "lv2(2): # __rsxaudio_intr_create_thread 983 ffffffff" or "graphics error 512 : 00012625 c221bbb0" ; "lv2(2): page fault handler (DSI): invalid access address 0x795d00e8!".

• DECR-1400:
  • You cannot use Performance monitoring functions (libperf, libprof, tuner for PS3)
    • for SPU: PC sampling, Performance counters, Bookmark, RAW SPU support
    • for RSX: Signal Trace, User Events.
  • DECI3 is limited to one protocol and a data exchange size of 65535 bytes.
  • The two GbLAN´s share the same MAC ID and cannot be used in the same network segment.
  • Gb-DEVLAN is connected to South Bridge.