Iso module
Jump to navigation
Jump to search
Explaination
Isolated modules are used for de-/encryption, rehashing etc.
Commonly found in CoreOS, dev_flash, embedded sony selfs and service packages like Remarry Bluray Drive.
They are SPU .self binaries which can be called whenever needed: e.g. decrypting and hashcheck EID0 for Target ID inside IDPS when called upon by lv1 (HyperVisor) to set up restrictions for Retail/CEX or Debug/DEX etc.
Known isolated modules
| Module | Usage | Remarks |
|---|---|---|
| AacsModule.spu.isoself | theoretically EID3 and OCRL | |
| aim_spu_module | EID0 (section 0x00 and 0x0A) | |
| CprmModule.spu.isoself | theoretically EID3 | |
| CssModule.spu.isoself | ||
| fdm_spu_module | EID2, Remarry Bluray Drive | [2.43 JIG PUP] |
| manu_info_spu_module.self | ||
| mc_iso_spu_module | PS2 | |
| me_iso_for_ps2emu.self | PS2 | |
| me_iso_spu_module | PS2 | |
| SacModule.spu.isoself | ||
| sb_iso_spu_module | southbridge | |
| sc_iso | syscon | |
| sc_iso_factory.self | syscon | [2.43 JIG PUP] |
| spu_handler.isoself | PSP | self inside \dev_flash\pspemu\release\emulator_drm.sprx mself (since FW 3.15). |
| spu_mode_auth.self | [2.43 JIG PUP] | |
| spu_pkg_rvk_verifier.self | ||
| spu_token_processor.self | systemtokens, QA Flagging | |
| spu_utoken_processor.self | usertokens | |
| ss_sc_init.self | [2.43 JIG PUP] | |
| sv_iso_for_ps2emu.self | PS2 | |
| sv_iso_spu_module | EID4, PS2, bluray |
sc_iso.self
sc_iso.self is used by the system to handle communications to/from syscon. Once debug printing is enabled after you load it, you can see some of the internal workings including error codes for when you are trying to use the module on your own.
| Error Value | Meaning |
|---|---|
| 0x81010101 | sc_iso command failed |
| 0x81010106 | Bad input command value |
| 0x81011e07 | Bad parameter for encrypt/decrypt |