Protection: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| (9 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
<div style="float:right">[[File:CECHC FUSE-TH3401.JPG|200px|thumb|left|Fuse (TH3401) as seen on [[CECHCxx]]]]</div> | |||
= Protection devices (IC Link / Thermistors / Fuses) = | = Protection devices (IC Link / Thermistors / Fuses) = | ||
| Line 36: | Line 38: | ||
*TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the [[HDMI]] [[Connectors#Audio/Video connectors|output connector]] and is feeded by +5V_ANA via R2553 0 Ohm. | *TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the [[HDMI]] [[Connectors#Audio/Video connectors|output connector]] and is feeded by +5V_ANA via R2553 0 Ohm. | ||
====VER-001==== | |||
1-878-196-21 TH2401 <br /> | |||
*TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the [[MultiAV]] [[Connectors#AV Multi Out|output connector]] and is feeded by IC2403 (12V to 5V step down converter) TK73350RTL-G (500 mA Positive Voltage Regulators). | |||
===Thermistor, Positive === | ===Thermistor, Positive === | ||
| Line 75: | Line 81: | ||
*TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC | *TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC | ||
*TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD | |||
====VER-001==== | |||
1-878-196-21 TH3280, TH3301, TH6001 <br /> | |||
*TH3280 : is used for CN3280 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD | |||
*TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB | |||
*TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD | *TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD | ||
| Line 115: | Line 130: | ||
*TH4002 : is used for Power/Reset circuit, going to IC4002 CXR713120-203GB-TL port E:pad A12 EJECT_SW via R4073 4700 Ohm and going to IC4002 CXR713120-203GB-TL port E:pad B12 /POW_SW via R4074 4700 Ohm, is feeded by +3.3V_EVER | *TH4002 : is used for Power/Reset circuit, going to IC4002 CXR713120-203GB-TL port E:pad A12 EJECT_SW via R4073 4700 Ohm and going to IC4002 CXR713120-203GB-TL port E:pad B12 /POW_SW via R4074 4700 Ohm, is feeded by +3.3V_EVER | ||
====VER-001==== | |||
*TH4002 : is used for Power/Reset circuit, going to IC4002 CXR713120-203GB-TL port E:pad A12 EJECT_SW via R4073 4700 Ohm and going to IC4002 CXR713120-203GB-TL port E:pad B12 /POW_SW via R4074 4700 Ohm, is feeded by +3.3V_EVER | |||
*TH3201 : Undocumented | |||
===Thermistor, Positive === | ===Thermistor, Positive === | ||
| Line 120: | Line 140: | ||
====COK-001==== | ====COK-001==== | ||
1-802-283-11 TH6002 <br /> | 1-802-283-11 TH6002 <br /> | ||
TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD | *TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD | ||
====COK-002==== | ====COK-002==== | ||
1-802-283-11 TH6002 <br /> | 1-802-283-11 TH6002 <br /> | ||
TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD | *TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD | ||
====SEM-001==== | ====SEM-001==== | ||
1-802-246-11 TH6002 <br /> | 1-802-246-11 TH6002 <br /> | ||
TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD | *TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD | ||
====VER-001==== | |||
*TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD | |||
== Fuses == | == Fuses == | ||
| Line 174: | Line 195: | ||
*F6305 : Used to protect Q6601 SI4830ADY-T1 (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +12V_MAIN | *F6305 : Used to protect Q6601 SI4830ADY-T1 (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +12V_MAIN | ||
====VER-001==== | |||
*F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN | |||
*F6002 : Used to protect Q6005 SI489ADY-T1 (if this fuse fails input regulators of +3.3V_MISC wont get power and console shuts down in 2 seconds). Gets feeded by +12V_MAIN | |||
*F6003 : Undocumented | |||
*F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN | |||
*F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN | |||
*F6304 : Used to protect Q6301 FDQ7238AS (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +5V_EVER | |||
*F6305 : Used to protect Q6601 SI4830ADY-T1 (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +12V_MAIN | |||
== Picture Gallery == | == Picture Gallery == | ||
<Gallery> | <Gallery> | ||
File:Cok-002 - fuses.jpg|COK-002 fuses + thermisters - front+back | |||
File:JSD-001-fuses-thermisters.front.jpg|JSD-001 fuses + thermisters - front | File:JSD-001-fuses-thermisters.front.jpg|JSD-001 fuses + thermisters - front | ||
File:JSD-001-fuses-thermisters.back.jpg|JSD-001 fuses + thermisters - back | File:JSD-001-fuses-thermisters.back.jpg|JSD-001 fuses + thermisters - back | ||
File:DYN-001-fuses-thermistors.front.jpg|DYN-001 fuses + thermistors - front | |||
File:DYN-001-fuses-thermistors.back.jpg|DYN-001 fuses + thermistors - back | |||
File:VER-001-fuses-thermisters.front.jpg|VER-001 fuses + thermisters - front | |||
File:VER-001-fuses-thermisters.back.jpg|VER-001 fuses + thermisters - back | |||
File:MPX-001 12GB bottom-ne.jpg|MPX-001 12GB bottom - ne | |||
File:MPX-001 12GB bottom-nw.jpg|MPX-001 12GB bottom - nw | |||
File:MPX-001 12GB bottom-sw.jpg|MPX-001 12GB bottom - sw | |||
File:MPX-001 12GB bottom-se.jpg|MPX-001 12GB bottom - se | |||
File:MPX-001 12GB top-ne.jpg|MPX-001 12GB top - ne | |||
File:MPX-001 12GB top-nw.jpg|MPX-001 12GB top - nw | |||
File:MPX-001 12GB top-sw.jpg|MPX-001 12GB top - sw | |||
File:MPX-001 12GB top-se.jpg|MPX-001 12GB top - se | |||
</Gallery> | </Gallery> | ||
[[Category: | {{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude> | ||
Latest revision as of 18:42, 5 February 2014
Fuse (TH3401) as seen on CECHCxx
Protection devices (IC Link / Thermistors / Fuses)[edit | edit source]
IC Link[edit | edit source]
Link IC PS3501 (1.2A/72V)[edit | edit source]
PS3501 1-576-282-21 LINK, SQUARE CHIP TYPE IC (1.2A/72V)
used to protect IC3502 (MM1761KHBE) pin 8 (VIN), comes from +3.3V_MISC
Link IC PS6001 (2A/72V)[edit | edit source]
PS6001 1-533-282-21 LINK, IC (2A/72V)
used to protect Q6001 FDQ7238AS (if this fuse fails input regulators of +3.3V_MISC wont get power and console shuts down in 2 seconds), comes from CN6004 pin 1 (+12V_MAIN)
Thermistors[edit | edit source]
Thermistor, Positive[edit | edit source]
COK-001[edit | edit source]
1-802-276-11 TH2401, TH2501
- TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) OnSemi MC78M05CDTRK (500 mA Positive Voltage Regulators).
- TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the HDMI output connector and is feeded by +5V_ANA via R2553 0 Ohm.
COK-002[edit | edit source]
1-802-276-11 TH2401, TH2501
- TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) OnSemi MC78M05CDTRK (500 mA Positive Voltage Regulators).
- TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the HDMI output connector and is feeded by +5V_ANA via R2553 0 Ohm.
SEM-001[edit | edit source]
1-805-726-11 TH2401, TH2501
- TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) TK73350RTL-G (500 mA Positive Voltage Regulators).
- TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the HDMI output connector and is feeded by +5V_ANA via R2553 0 Ohm.
VER-001[edit | edit source]
1-878-196-21 TH2401
- TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) TK73350RTL-G (500 mA Positive Voltage Regulators).
Thermistor, Positive[edit | edit source]
COK-001[edit | edit source]
1-802-243-11 TH3202, TH3301, TH3302, TH3401, TH3702, TH6001
- TH3202 : is used for CN3219 15P (Multi_Card_Board) - pin9 +5V_USB, pin10 +5V_USB, pin11 +5V_USB, pin12 +5V_USB.
- TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB
- TH3302 : is used to protect IC3304 (USB Power) BD6517F pin7 VDD via R3350 0 Ohm. Is feeded by +5V_USB
- TH3401 : is used for CN3401 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD
- TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC
- TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD
COK-002[edit | edit source]
1-802-243-11 TH3202, TH3301, TH3302, TH3401, TH3702, TH6001
- TH3202 : is used for CN3219 15P (Multi_Card_Board) - pin9 +5V_USB, pin10 +5V_USB, pin11 +5V_USB, pin12 +5V_USB.
- TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB
- TH3302 : is used to protect IC3304 (USB Power) BD6517F pin7 VDD via R3350 0 Ohm. Is feeded by +5V_USB
- TH3401 : is used for CN3401 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD
- TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC
- TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD
SEM-001[edit | edit source]
1-802-243-11 TH3280, TH3301, TH3702, TH6001
- TH3280 : is used for CN3280 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD
- TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB
- TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC
- TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD
VER-001[edit | edit source]
1-878-196-21 TH3280, TH3301, TH6001
- TH3280 : is used for CN3280 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD
- TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB
- TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD
Thermistor, Positive[edit | edit source]
COK-001[edit | edit source]
1-802-277-11 TH3203, TH3204, TH3701, TH4001, TH4002
- TH3203 : is used for CN3221 60P (BD ATA0) - pin 60 +3.3V_EVER
- TH3204 : is used for CN3221 60P (BD ATA0) - pin pin 22 (XIRDY / /SB_ATA0_IORDY) via R3248 4700 Ohm, gets feeded from +3.3V_SB_VDDIO
- TH3701 : is used for CN3701 33P (Wifi Board) - pin 1 +5V_EVER
- TH4001 : is used for CN4010 10P (Power/Reset Board) - pin 1 +5V_EVER
- TH4002 : is used for CN4010 10P (Power/Reset Board) - pin 6 (/eject_sw) via R4073 10K Ohm and CN4010 10P - pin 7 (/power_sw) via R4074 10K Ohm.
COK-002[edit | edit source]
1-802-277-11 TH3203, TH3204, TH3701, TH4001, TH4002
- TH3203 : is used for CN3221 60P (BD ATA0) - pin 60 +3.3V_EVER
- TH3204 : is used for CN3221 60P (BD ATA0) - pin pin 22 (XIRDY / /SB_ATA0_IORDY) via R3248 4700 Ohm, gets feeded from +3.3V_SB_VDDIO
- TH3701 : is used for CN3701 33P (Wifi Board) - pin 1 +5V_EVER
- TH4001 : is used for CN4010 10P (Power/Reset Board) - pin 1 +5V_EVER
- TH4002 : is used for CN4010 10P (Power/Reset Board) - pin 6 (/eject_sw) via R4073 10K Ohm and CN4010 10P - pin 7 (/power_sw) via R4074 10K Ohm.
SEM-001[edit | edit source]
1-805-762-11 TH3401, TH3402, TH3701, TH4001, TH4002
- TH3401 : is used for CN3221 60P (BD ATA0) - pin 22 (XIRDY / /SB_ATA0_IORDY) via R3248 4700 Ohm, gets feeded from +3.3V_SB_VDDIO
- TH3402 : is used for CN3221 60P (BD ATA0) - pin 60 +3.3V_EVER
- TH3701 : is used for CN3701 33P (Wifi Board) - pin 1 +5V_EVER
- TH4001 : is used for Power/Reset circuit, feeded by +5V_EVER
- TH4002 : is used for Power/Reset circuit, going to IC4002 CXR713120-203GB-TL port E:pad A12 EJECT_SW via R4073 4700 Ohm and going to IC4002 CXR713120-203GB-TL port E:pad B12 /POW_SW via R4074 4700 Ohm, is feeded by +3.3V_EVER
VER-001[edit | edit source]
- TH4002 : is used for Power/Reset circuit, going to IC4002 CXR713120-203GB-TL port E:pad A12 EJECT_SW via R4073 4700 Ohm and going to IC4002 CXR713120-203GB-TL port E:pad B12 /POW_SW via R4074 4700 Ohm, is feeded by +3.3V_EVER
- TH3201 : Undocumented
Thermistor, Positive[edit | edit source]
COK-001[edit | edit source]
1-802-283-11 TH6002
- TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD
COK-002[edit | edit source]
1-802-283-11 TH6002
- TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD
SEM-001[edit | edit source]
1-802-246-11 TH6002
- TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD
VER-001[edit | edit source]
- TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD
Fuses[edit | edit source]
Fuse, Chip (3216) (5A/32V)[edit | edit source]
COK-001[edit | edit source]
1-576-679-11 F6001, F6301, F6302, F6303, F6304
- F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN
- F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN
- F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO, +1.2V_EEGS_VDD/DIG_+1.2V1 and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN
- F6303 : Used to protect Q6308 SI4866DY-T1-E3 (if this fuse fails input regulators of +1.5V_YC_RC_VDDA wont get power). Gets feeded by +1.7V_MISC
- F6304 : Used to protect Q6301 FDQ7238AS (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +5V_EVER
COK-002[edit | edit source]
1-576-679-11 F6001, F6301, F6302, F6303, F6304
- F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN
- F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN
- F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO, +1.2V_GX_VDDC and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN
- F6303 : Used to protect Q6308 SI4866DY-T1-E3 (if this fuse fails input regulators of +1.5V_YC_RC_VDDA wont get power). Gets feeded by +1.7V_MISC
- F6304 : Used to protect Q6301 FDQ7238AS (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +5V_EVER
SEM-001[edit | edit source]
- F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN
- F6002 : Used to protect Q6005 SI489ADY-T1 (if this fuse fails input regulators of +3.3V_MISC wont get power and console shuts down in 2 seconds). Gets feeded by +12V_MAIN
- F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN
- F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN
- F6304 : Used to protect Q6311 SI4391DY-T1-E3 (if this fuse fails input regulators of +1.2V_BE_VCS wont get power). Gets feeded by +12V_MAIN
- F6305 : Used to protect Q6601 SI4830ADY-T1 (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +12V_MAIN
VER-001[edit | edit source]
- F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN
- F6002 : Used to protect Q6005 SI489ADY-T1 (if this fuse fails input regulators of +3.3V_MISC wont get power and console shuts down in 2 seconds). Gets feeded by +12V_MAIN
- F6003 : Undocumented
- F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN
- F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN
- F6304 : Used to protect Q6301 FDQ7238AS (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +5V_EVER
- F6305 : Used to protect Q6601 SI4830ADY-T1 (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +12V_MAIN
Picture Gallery[edit | edit source]
COK-002 fuses + thermisters - front+back
JSD-001 fuses + thermisters - front
JSD-001 fuses + thermisters - back
DYN-001 fuses + thermistors - front
DYN-001 fuses + thermistors - back
VER-001 fuses + thermisters - front
VER-001 fuses + thermisters - back
MPX-001 12GB bottom - ne
MPX-001 12GB bottom - nw
MPX-001 12GB bottom - sw
MPX-001 12GB bottom - se
MPX-001 12GB top - ne
MPX-001 12GB top - nw
MPX-001 12GB top - sw
MPX-001 12GB top - se
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
