Remarry Bluray Drive: Difference between revisions

Revision as of 13:06, 9 March 2012

http://www.ps3devwiki.com/files/lv2diag/remarry/

Remarry BluRay drive

Hardware is interlocked on the PS3, so exchanging a bluray drive from one unit to another requires remarriage of the components.

Procedure

Make sure you don´t have any CD/DVD/BD on the drive
Put unrar'ed remarry files on a blank USB stick & add a 2.30 (PS3 FAT only) or 3.15 (PS3 Slim) PUP
Put in the service mode JIG/dongle and get into factory service mode.
Put the created USB stick into port 0 (closest to the reader) and run.
1. Drive Init Executing File:PS3 Remarry DriveInit Executing.jpg means it is starting the remarry process
2. Drive Init Failed with big pink letters 'NG' (No Good!) File:PS3 Remarry Pink-NG DriveInit Fail.jpg means the process failed. Most likely solved by first downgrading the console or fix the communication issue with the drive.
After you run the initial remarry process, do not take it out of factory service mode.
Put a BD movie disc in and run it on the PS3. (This restores your DRL files!)
Then you can take it out of factory service mode.
Launch as normal.

Needed files on USB stick

dev_usb000.rar (856.52 KB) :

http://www.zshare.net/download/890710435e792875/
http://hotfile.com/dl/114659343/2d8630a/dev_usb000.rar.html
http://depositfiles.com/en/files/6zb5a1ozf
http://www.megaupload.com/?d=O2M43K40
http://rapidshare.com/files/457728407/dev_usb000.rar
http://www.rapidspread.com/file.jsp?id=anxklm4bcu
http://www.easy-share.com/1914734717/dev_usb000.rar
http://ps3devwiki.com/files/lv2diag/remarry/dev_usb000.rar

Lv2diag.self                          MD5:C48E5EBFC00ABD89094CB73A2B0BEA59 / SHA1:D229AC694910272DDEA9276B9FD4A2664800638C / CRC32:C2D0A2B0 / CRC16:5327
manufacturing_updater_for_reset.self  MD5:9E3C9024E9243478D21C78E1C9DF2376 / SHA1:922EA202CA2EA36EBF2B5054605E17409B9A56E6 / CRC32:93F18A95 / CRC16:EA0D
fdm_spu_module.self                   MD5:9BDE16660221042A4440ED2C053A139E / SHA1:D63AA8F0F1C4A7A4497A9E297062CA6E9D2B568B / CRC32:B5961101 / CRC16:3D0C
PS3UPDAT.PUP  (see above and additional notes)
cfg [folder]
- standalone.cfg        (original was MD5:24DB112BF90A4048462C6D26F4263507 / SHA1:519F627B9F367A2E0E05F956E9F2720E4C7AFE8C / CRC32:A3E44601 / CRC16:8619)

for comparison:

ifcaro @ elotrolado:
- manufacturing_updater_for_reset.self  MD5:90168C03B217CE775A7839D87BBFF2A3 / SHA1:1E770010A3A6EF572AF39783A04DF792670998D3
3.55 downgrader :
- Lv2diag.self  (file1)                 MD5:099F33A7967F99E91C07E870FD78B3DB / CRC32:9338ABF2 / CRC16:4FCC
- Lv2diag.self  (file2)                 MD5:7A20BFDAE65EEFB47A4425DB1B52DCDE / CRC32:72740080 / CRC16:502A (same as 3.50--)
3.50 downgrader :
- Lv2diag.self  (file1)                 MD5:90168C03B217CE775A7839D87BBFF2A3 / CRC32:D1F0AAFC / CRC16:CD8D
- Lv2diag.self  (file2)                 MD5:7A20BFDAE65EEFB47A4425DB1B52DCDE / CRC32:72740080 / CRC16:502A
ObjectiveSuites files : 
- CONSOLE_SETUP_CEX.SIG.XML            (MD5:0DAE958782D5584DFF3A1EB880ABC067 / SHA1:544432CF2CED5836ED3B8BE9DED2898AA57AA00A)

Additional Notes on Remarry Procedure

2.30 and 3.15 are not 'special', iirc firmware <=3.30 should be fine (>3.30 won't work) to use as reinstaller PUP.
Lv2diag.self for 3.55 downgrade has BD patched out. So in case you have a 3.55 console you wish to remarry, you can either:
- lv2diag.self downgrade it first to 3.50 or lower and then use the remarry procedure ; or (if possible):
- QA-flag extra it, then QA downgrade via recovery to <3.50 followed by remarry procedure.
  - without working BD packages won't work :(
- If console was previously downgraded from =<3.56:
  - syscon hashes must be either patched out (lv1 patches)
    - e.g. Rogero_CFW3.50_LV1Patched_NoBD_for_Re-marry.PUP
  - or dehashed (double FSM)

Alternative method for restoring DRL : Downgrade BluRay Playback Issue #Fixing

If you have problems with remarry, but still get a good "Drive Init" message or where able to restore the original DRL backup from dev_flash3 of that BD-drive and it still does not work: try Restore Filesystem in the Recovery Menu.

CFG Settings

Remark: For some reason people are not looking in the CFG file for other selectable options.

e.g. (line 269 until line 280 quoted):

#----------------------------------------------
# Drive Init
#   0 = ŽÀs‚µ‚È‚¢
#   1 = ŽÀs‚·‚é
#----------------------------------------------
1

This will remarry the drive to the console and remake the DRL files (setting it to 0 will NOT remarry it)

#---------------------------------------------
# Install Systemsoftware
#   0 = ŽÀs‚µ‚È‚¢
#   1 = ŽÀs‚·‚é
#----------------------------------------------
1

This will install the firmware PUP that is on the USB stick in root (setting it to 0 will NOT install firmware)

Warning about editing CFG

Default is both options set to 1 and is confirmed to work on both PS3 FAT (NAND and NOR) and PS3 Slim (NOR). Strange things can happen when messing with the CFG and using nonvalid values or combinations.

Remarry breakdown

full CFG breakdown

###############################################
# DiagÝ’èƒtƒ@ƒCƒ‹
# —ÊŽŽ—p
# WLAN & BT RSSI‘ª’è
#
# 2006/09/06	kyoshida
#             Eurus‚Ì—L–³ŒŸo‘Î‰ž
# 2006/10/10	kyoshida
#             RSSI’l‚Ì‹KŠi‚ð
#            u’²®ŒŸ¸—v€F06.10.05v‚Ö‡‚í‚¹‚éB
###############################################
#=== ‹¤’ÊÝ’è =================================
#
# Œv‘ªƒ‚[ƒhÝ’è
#
#   0 = ’Êíƒ‰ƒCƒ“ŒŸ¸
#   1 = ƒfƒoƒbƒN Œv‘ªŒJ‚è•Ô‚µ
#----------------------------------------------
0

#=== ‹¤’ÊÝ’è =================================
#
# RSSI‚ª‹KŠi“à‚Ìê‡‚ÉAshutdown‚ðŽÀs‚·‚é‚©H‚ÌÝ’è
#
#   0 = shutdown ‚µ‚È‚¢B
#   1 = shutdown ‚·‚éB
#----------------------------------------------
1

#=== ‹¤’ÊÝ’è =================================
#
# ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦
#
# RSSI‚ª‹KŠi“à(-OK-)‚Ìê‡‚És‚¤LED§Œä
#
# LED ID
#
#   1 = POWER(green)
#   2 = STATUS(red)
#
# LED ACTION
#
#   0 = OFF
#   1 = ON
#   2 = BLINK FAST
#   3 = BLINK SLOW
#----------------------------------------------
#<1>------
# LED ID
1

# LED ACTION
1

#<2>------
# LED ID
2

# LED ACTION
0

#=== ‹¤’ÊÝ’è =================================
#
# ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦
#
# RSSI‚ª‹KŠiŠO(-NG-)‚Ìê‡‚És‚¤LED§Œä
#
# LED ID
#
#   1 = POWER(green)
#   2 = STATUS(red)
#
# LED ACTION
#
#   0 = OFF
#   1 = ON
#   2 = BLINK FAST
#   3 = BLINK SLOW
#----------------------------------------------
#<1>------
# LED ID
1

# LED ACTION
2
#<2>------

# LED ID
2

# LED ACTION
0

#=== WLANÝ’è =================================
#
# <10i“ü—Í>
#
# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è
#
#   0 = ‘ª’è‚µ‚È‚¢B
#   1 = ‘ª’è‚·‚éB
#   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB
#
# RSSI‚Ì‹KŠi
#
#   min[dBm]
#   max[dBm]
#
# OK count
# NG count
#
# ‘ª’èŽüŠú‚Ì–ÚˆÀ
#   [‘ª’èƒ`ƒƒƒ“ƒlƒ‹”] ~ 100msec
#----------------------------------------------

# <ANTENNA A>
0
-80
-20
2
200

# <ANTENNA B>
0
-80
-20
2
200

# <ANTENNA DIVERSITY>
0
-80
-20
2
200

#=== WLANÝ’è =================================
#
# <10i“ü—Í>
#
# RSSI‘ª’è‚ðs‚¤ƒ`ƒƒƒ“ƒlƒ‹‚ÌÝ’è
# 1 - 13ŒÂ‚ðŽw’è
#
#   channel < 14 = ‘ª’è‚·‚éB
#   channel > 13 = ‘ª’è‚µ‚È‚¢B(255ˆÈ‰º)
#
#----------------------------------------------
# 1 - 13ch ‘S‚Ä‘ª’è‚·‚éê‡
1
2
3
4
5
6
7
8
9
10
11
12
13

###############################################
# samples
# 1 ‚Æ 13ch ‚¾‚¯‘ª’è‚·‚éê‡
##############################################
#1
#13
#77
#77
#77
#77
#77
#77
#77
#77
#77
#77
#77
#END-samples----------------------------------

#=== APÚ‘±ŒŸ¸ŠÖŒW‚ÌÝ’è ====================
#
# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è
#
#   0 = ‘ª’è‚µ‚È‚¢B
#   1 = ‘ª’è‚·‚éB
#   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB
#
# OK count
# NG count
#
# Ú‘±Šm”FŽüŠú‚Ì–ÚˆÀ
#   100msec
#
# <AP>
#   SSID
#   IP ADDRESS
#
# <COOKIE>
#   IP ADDRESS
#   NETMASK
#   DEFAULT ROUTE
#   PRIMARY DNS
#
#----------------------------------------------
0
10
300

#<AP>
LV2DIAG-AP
192.168.1.1

#<COOKIE>
192.168.1.100
255.255.255.0
192.168.1.1
192.168.1.1

#=== BTÝ’è =================================
#
# <10i“ü—Í>
#
# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è
#
#   0 = ‘ª’è‚µ‚È‚¢B
#   1 = ‘ª’è‚·‚éB
#
# RSSI‚Ì‹KŠi
#
#   min[dBm]
#   max[dBm]
#
# OK count
# NG count
#
# ‘ª’èŽüŠú‚Ì–ÚˆÀ
#   100msec
#----------------------------------------------

# <ANTENNA 1>
0
-60
-1
2
300

# <ANTENNA 2>
0
-60
-1
2
30

# <ANTENNA DIVERSITY>
0
-60
-1
2
30

#=== CS Only ================================
#
#ƒRƒ“ƒgƒ[ƒ‰[‚ð‚Í‚¸‚·‚Æ‚«‚ÌLED“_“”ƒpƒ^[ƒ“
#
# LED ID
#
#   1 = POWER(green)
#   2 = STATUS(red)
#
# LED ACTION
#
#   0 = OFF
#   1 = ON
#   2 = BLINK FAST
#   3 = BLINK SLOW
#--------------------------------------------
#<1>------

# LED ID
1

# LED ACTION
2
#<2>------

# LED ID
2

# LED ACTION
0

###############################################
#=== ‚»‚Ì‘¼€–Ú‚ÌŽÀs‚Ì—L–³ ===================
# WLAN,BTŒŸ¸‚ÌŒã‚ÉŽÀs‚³‚ê‚é

Drive Init

#----------------------------------------------
# Drive Init
#   0 = ŽÀs‚µ‚È‚¢
#   1 = ŽÀs‚·‚é
#----------------------------------------------
1

This will remarry the drive to the console and remake the DRL files (setting it to 0 will NOT remarry it)

Install Systemsoftware

#---------------------------------------------
# Install Systemsoftware
#   0 = ŽÀs‚µ‚È‚¢
#   1 = ŽÀs‚·‚é
#----------------------------------------------
1

This will install the firmware PUP that is on the USB stick in root (setting it to 0 will NOT install firmware)

freebdp

#---------------------------------------------
# freebdp
#   0 = ŽÀs‚µ‚È‚¢
#   1 = ŽÀs‚·‚é
#----------------------------------------------
0

If enabled will give error 0x80010006 (file does not exist) and results in "Initialize revocation list FAIL". It needs free_bdp.self to be present

Install Systemsoftware Updater

#---------------------------------------------
# Install Systemsoftware ‚ÅŽg—p‚·‚éUpdater–¼
#----------------------------------------------
manufacturing_updater_for_reset.self

the filename of the SELF used for updating the firmware

lv2diag.self (remarry)

  MD5:C48E5EBFC00ABD89094CB73A2B0BEA59 / SHA1:D229AC694910272DDEA9276B9FD4A2664800638C / CRC32:C2D0A2B0 / CRC16:5327

(readable text in SELF)

manufacturing_updater_for_reset.self (remarry)

  MD5:9E3C9024E9243478D21C78E1C9DF2376 / SHA1:922EA202CA2EA36EBF2B5054605E17409B9A56E6 / CRC32:93F18A95 / CRC16:EA0D

fdm_spu_module.self (remarry)

  MD5:9BDE16660221042A4440ED2C053A139E / SHA1:D63AA8F0F1C4A7A4497A9E297062CA6E9D2B568B / CRC32:B5961101 / CRC16:3D0C

3.55 downgrader

Lv2diag.self (file1 - 3.55 downgrader)

  MD5:099F33A7967F99E91C07E870FD78B3DB / CRC32:9338ABF2 / CRC16:4FCC

Lv2diag.self (file2 - 3.55 downgrader)

  MD5:7A20BFDAE65EEFB47A4425DB1B52DCDE / CRC32:72740080 / CRC16:502A

(same as 3.50--)

3.50 downgrader

Lv2diag.self (file1 - 3.50 downgrader)

  MD5:90168C03B217CE775A7839D87BBFF2A3 / CRC32:D1F0AAFC / CRC16:CD8D

Lv2diag.self (file2 - 3.50 downgrader)

  MD5:7A20BFDAE65EEFB47A4425DB1B52DCDE / CRC32:72740080 / CRC16:502A

(same as 3.55--)

Other

manufacturing_updater_for_reset.self (ifcaro @ elotrolado)

  MD5:90168C03B217CE775A7839D87BBFF2A3 / SHA1:1E770010A3A6EF572AF39783A04DF792670998D3

CONSOLE_SETUP_CEX.SIG.XML (ObjectiveSuites files)

  MD5:0DAE958782D5584DFF3A1EB880ABC067 / SHA1:544432CF2CED5836ED3B8BE9DED2898AA57AA00A

@@ Line 1: / Line 1: @@
 [[Category:Software]][[Category:Hardware]]
+http://www.ps3devwiki.com/files/lv2diag/remarry/
 == Remarry BluRay drive ==

Remarry Bluray Drive: Difference between revisions

Revision as of 13:06, 9 March 2012

Contents