Talk:Syscon Hardware: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
m (Some of this details worths to be mentioned on frontpage/s)
m (Moved to Talk:SKU Models)
Line 5: Line 5:
*In theory even the SW(1) chips work on Mullion boards if you adapt them.
*In theory even the SW(1) chips work on Mullion boards if you adapt them.
*The SW and the SW2 are not interchangable (because of the CEC handling which uses hardcoded HDMI stuff).
*The SW and the SW2 are not interchangable (because of the CEC handling which uses hardcoded HDMI stuff).
Sony never uses the CECHXxx code internally, neither the motherboard label (e.g. COK-001), the only thing which they use to identify the hardware is '''the platform id, which contains the chassis id''' . On [[SKU_Models_Nonretail#Prototype_model_names|prototype units]] it's not only stored in syscon, but also on a label on the board and part of the board_id inside cISD1. They starts with the platform id, then get the chassis id which then maps to the numeric model code (1000, 1200, 1300...) and the model type byte inside the IDPS. The actual SKU name then gets assigned based on what they want it to be marketed as.<br>
That's why I think the SKU name and board name are maybe misleading if you don't know how Sony works with them. The platform id is mapped 1:1 to your actual hardware, the SKU codes (especially for the early models) are all over the place. For example there're CECHA/DECHA with COK-001, COK-001 (with COK-002 syscon) and COK-002, also models certified as CECHE are sold as CECHA in some regions. The CECHM either had a VER-001 or DIA-001, completely different architecture and I wonder how many of these cases we haven't identified yet...<br>
[[User:M4j0r|M4j0r]] ([[User talk:M4j0r|talk]]) 13:49, 23 April 2021 (UTC)

Revision as of 18:18, 4 November 2021

Notes

  • Every syscon within a series (CXR, SW, SW2, SW3) is backwards compatible, e.g. every CXR Syscon works on the COK-001, but only 202GB and newer on a COK-002.
  • The SoftID (Syscon firmware build id) of retail chips is a 1:1 mapping to the syscon model. So each syscon model does have a unique SoftID.
  • The actual platform configuration which defines the board on the which Syscon resides is stored in the EEPROM (CXR) or Flash data section (SW), it can be mapped to the platform id.
  • In theory even the SW(1) chips work on Mullion boards if you adapt them.
  • The SW and the SW2 are not interchangable (because of the CEC handling which uses hardcoded HDMI stuff).
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Talk:Syscon_Hardware&oldid=63114"