Difference between revisions of "Template:DSW-001 pinout"

From PS3 Developer wiki
Jump to: navigation, search
m
m
 
(No difference)

Latest revision as of 16:23, 5 December 2021

DSW-001 Pinout

Pin Name Connected to Description
On Motherboard On Switch board
1 RMC_IN ? Syscon SW2-30x, pin 13 Testpad Only This line have a Testpad @ switchboard, seems that it is a service pin.
Also connected to a pin of a Service Connectors ?
2 SW_PWM ? Syscon SW2-30x, pin 12 4x CONTOUR LEDs Permanently inactive by default.
On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
3 ? Syscon SW2-30x, pin 11 2x White leds - Inner LEDs for EJECT button backlight
2x White leds - Inner LEDs for POWER button backlight
4 POW_SW Syscon SW2-30x, pin 110 Power switch PS3 power button Sink to ground to activate.
5 EJECT_SW Syscon SW2-30x, pin 111 Eject switch PS3 eject button Sink to ground to activate.
6 POW_LED Syscon SW2-30x, pin 5 Green led Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
7 STBY_LED Syscon SW2-30x, pin 6 Red led Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
8 BD_LED BluRay Connector, pin 13 Blue led Connects to blue LED over eject switch.
9 GND GND GND Ground
10 +5V_EVER Power Supply Connector (CN101), pin 1 VCC 5V Standby
  • above top panel view port behind pcb. resistors was not tested.