Difference between revisions of "Template:DSW-001 pinout"

From PS3 Developer wiki
Jump to: navigation, search
m
m
Line 23: Line 23:
 
| 8 || BD_LED || BluRay Connector, pin 13 || BLUE led || Connects to blue LED over eject switch.
 
| 8 || BD_LED || BluRay Connector, pin 13 || BLUE led || Connects to blue LED over eject switch.
 
|-
 
|-
| 9 || GND || style="color:white; background-color:#333333;" | GND || style="color:white; background-color:#333333;" | GND || style="color:white; background-color:#333333;" | Ground
+
| 9 || GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} Ground
 
|-
 
|-
 
| 10 || +5V_EVER || {{cellcolors|#CC3333|white}} CN101 [[Power Supply]], pin1 ? || {{cellcolors|#CC3333|white}} VCC || {{cellcolors|#CC3333|white}} | +5V DC VCC
 
| 10 || +5V_EVER || {{cellcolors|#CC3333|white}} CN101 [[Power Supply]], pin1 ? || {{cellcolors|#CC3333|white}} VCC || {{cellcolors|#CC3333|white}} | +5V DC VCC

Revision as of 12:53, 5 December 2021

DSW-001 Pinout

Pin Name Connected to Description
On Motherboard On Switch board
1 RMC_IN ? Syscon SW2-30x, pin 13 Testpad Only This line have a Testpad @ switchboard, seems that it is a service pin.
Also connected to a pin of a Service Connectors ?
2 SW_PWM ? Syscon SW2-30x, pin 12 4x CONTOUR LEDs Permanently inactive by default.
On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
3 ? Syscon SW2-30x, pin 11 2x WHITE LEDs, ground pins Inner LEDs for EJECT button backlight
2x WHITE LEDs, ground pins Inner LEDs for POWER button backlight
4 POW_SW Syscon SW2-30x, pin 110 POWER switch PS3 power button Sink to ground to activate.
5 EJECT_SW Syscon SW2-30x, pin 111 EJECT switch PS3 eject button Sink to ground to activate.
6 POW_LED Syscon SW2-30x, pin 5 GREEN led Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
7 STBY_LED Syscon SW2-30x, pin 6 RED led Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
8 BD_LED BluRay Connector, pin 13 BLUE led Connects to blue LED over eject switch.
9 GND GND GND Ground
10 +5V_EVER CN101 Power Supply, pin1 ? VCC | +5V DC VCC
  • above top panel view port behind pcb. resistors was not tested.