Difference between revisions of "Template:DSW-001 pinout"

From PS3 Developer wiki
Jump to: navigation, search
m
m
Line 9: Line 9:
 
| 2 || SW_PWM ? || {{cellcolors|darkgrey|white}} Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || {{cellcolors|darkgrey|white}}4x CONTOUR LEDs || {{cellcolors|darkgrey|white}} Permanently inactive by default.<br />On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
 
| 2 || SW_PWM ? || {{cellcolors|darkgrey|white}} Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || {{cellcolors|darkgrey|white}}4x CONTOUR LEDs || {{cellcolors|darkgrey|white}} Permanently inactive by default.<br />On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
 
|-
 
|-
| rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds, ground pins || Inner LEDs for EJECT button backlight
+
| rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds - || Inner LEDs for EJECT button backlight
 
|-
 
|-
| 2x White leds, ground pins || Inner LEDs for POWER button backlight
+
| 2x White leds - || Inner LEDs for POWER button backlight
 
|-
 
|-
 
| 4 || POW_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 110 || Power switch {{buttonpower}} || Sink to ground to activate.
 
| 4 || POW_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 110 || Power switch {{buttonpower}} || Sink to ground to activate.

Revision as of 14:26, 5 December 2021

DSW-001 Pinout

Pin Name Connected to Description
On Motherboard On Switch board
1 RMC_IN ? Syscon SW2-30x, pin 13 Testpad Only This line have a Testpad @ switchboard, seems that it is a service pin.
Also connected to a pin of a Service Connectors ?
2 SW_PWM ? Syscon SW2-30x, pin 12 4x CONTOUR LEDs Permanently inactive by default.
On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
3 ? Syscon SW2-30x, pin 11 2x White leds - Inner LEDs for EJECT button backlight
2x White leds - Inner LEDs for POWER button backlight
4 POW_SW Syscon SW2-30x, pin 110 Power switch PS3 power button Sink to ground to activate.
5 EJECT_SW Syscon SW2-30x, pin 111 Eject switch PS3 eject button Sink to ground to activate.
6 POW_LED Syscon SW2-30x, pin 5 Green led Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
7 STBY_LED Syscon SW2-30x, pin 6 Red led Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
8 BD_LED BluRay Connector, pin 13 Blue led Connects to blue LED over eject switch.
9 GND GND GND Ground
10 +5V_EVER Power Supply Connector (CN101), pin 1 VCC 5V Standby
  • above top panel view port behind pcb. resistors was not tested.