Difference between revisions of "Template:DSW-001 pinout"

From PS3 Developer wiki
Jump to: navigation, search
m
m
 
Line 5: Line 5:
 
! On [[Motherboard_Revisions|Motherboard]] !! On [[Switch_boards|Switch board]]
 
! On [[Motherboard_Revisions|Motherboard]] !! On [[Switch_boards|Switch board]]
 
|-
 
|-
| 1 || <abbr title="IR Remote Control (input)">RMC_IN ?</abbr> || {{cellcolors|#44cc44|white}} Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 13 || {{cellcolors|#44cc44|white}} Testpad || {{cellcolors|#44cc44|white}} Only This line have a Testpad @ switchboard, seems that it is a service pin.<br>Also connected to a pin of a [[Service Connectors]] ?
+
| 1 || {{cellcolors|#44cc44|white}} <abbr title="IR Remote Control (input)">RMC_IN ?</abbr> || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 13 || Testpad || Only This line have a Testpad @ switchboard, seems that it is a service pin.<br>Also connected to a pin of a [[Service Connectors]] ?
 
|-
 
|-
| 2 || SW_PWM ? || {{cellcolors|darkgrey|white}} Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || {{cellcolors|darkgrey|white}}4x CONTOUR LEDs || {{cellcolors|darkgrey|white}} Permanently inactive by default.<br />On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
+
| 2 || {{cellcolors|darkgrey|white}} SW_PWM ? || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || 4x CONTOUR LEDs || Permanently inactive by default.<br />On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
 
|-
 
|-
 
| rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds - || Inner LEDs for EJECT button backlight
 
| rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds - || Inner LEDs for EJECT button backlight
Line 23: Line 23:
 
| 8 || BD_LED || BluRay Connector, pin 13 || Blue led || Connects to blue LED over eject switch.
 
| 8 || BD_LED || BluRay Connector, pin 13 || Blue led || Connects to blue LED over eject switch.
 
|-
 
|-
| 9 || GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} Ground
+
| 9 || {{cellcolors|#333333|white}} GND || GND || GND || Ground
 
|-
 
|-
| 10 || +5V_EVER || {{cellcolors|#CC3333|white}} [[Power Supply]] Connector (CN101), pin 1 || {{cellcolors|#CC3333|white}} VCC || {{cellcolors|#CC3333|white}} 5V Standby
+
| 10 || {{cellcolors|#CC3333|white}} +5V_EVER || [[Power Supply]] Connector (CN101), pin 1 || VCC || 5V Standby
 
|}
 
|}
 
* above top panel view port behind pcb. resistors was not tested.
 
* above top panel view port behind pcb. resistors was not tested.
 
<noinclude>[[Category:Templates]]</noinclude>
 
<noinclude>[[Category:Templates]]</noinclude>

Latest revision as of 16:23, 5 December 2021

DSW-001 Pinout

Pin Name Connected to Description
On Motherboard On Switch board
1 RMC_IN ? Syscon SW2-30x, pin 13 Testpad Only This line have a Testpad @ switchboard, seems that it is a service pin.
Also connected to a pin of a Service Connectors ?
2 SW_PWM ? Syscon SW2-30x, pin 12 4x CONTOUR LEDs Permanently inactive by default.
On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
3 ? Syscon SW2-30x, pin 11 2x White leds - Inner LEDs for EJECT button backlight
2x White leds - Inner LEDs for POWER button backlight
4 POW_SW Syscon SW2-30x, pin 110 Power switch PS3 power button Sink to ground to activate.
5 EJECT_SW Syscon SW2-30x, pin 111 Eject switch PS3 eject button Sink to ground to activate.
6 POW_LED Syscon SW2-30x, pin 5 Green led Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
7 STBY_LED Syscon SW2-30x, pin 6 Red led Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
8 BD_LED BluRay Connector, pin 13 Blue led Connects to blue LED over eject switch.
9 GND GND GND Ground
10 +5V_EVER Power Supply Connector (CN101), pin 1 VCC 5V Standby
  • above top panel view port behind pcb. resistors was not tested.