Difference between revisions of "Template:HSW-001 pinout"

From PS3 Developer wiki
Jump to: navigation, search
m (not needed, i added this info "by pin" right now)
(better this way, this is interesting enought to have a subliminal "dev bait" :P)
Line 5: Line 5:
 
! On Motherboard !! On Switch board
 
! On Motherboard !! On Switch board
 
|-{{cellcolors|grey|#ffffff}}
 
|-{{cellcolors|grey|#ffffff}}
| 1 || pin12 @ Syscon [[SW2-30x]] || 4x CONTOUR LEDs || On Switch board is connected to a transistor driving 2 LEDs with currentlimitor resistors of 3K {{ohm}} (red led at left-top) and 820 {{ohm}} (blue led at left-bottom)
+
| 1 || pin12 @ Syscon [[SW2-30x]] || 4x CONTOUR LEDs, transistor base pin || The transistor is located in the switch board and drives 2 LEDs with currentlimitor resistors of 3K {{ohm}} (red led at left-top) and 820 {{ohm}} (blue led at left-bottom)<br>The circuit has unpopulated pads to add another transistor and another 2 LEDs for a total of 4 LEDs driven by <abbr title="the line is inactive in all known working modes, the leds never emits light because syscon never sends the signal">a misterious syscon pin</abbr>
 
|-{{cellcolors|#cc3333|#ffffff}}
 
|-{{cellcolors|#cc3333|#ffffff}}
 
| 2 || pin1 @ CN101 [[Power Supply]] || VCC || +5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply
 
| 2 || pin1 @ CN101 [[Power Supply]] || VCC || +5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply

Revision as of 21:04, 18 July 2017

HSW-001 Pinout

Pin Signal/Connected to Description
On Motherboard On Switch board
1 pin12 @ Syscon SW2-30x 4x CONTOUR LEDs, transistor base pin The transistor is located in the switch board and drives 2 LEDs with currentlimitor resistors of 3K Ω (red led at left-top) and 820 Ω (blue led at left-bottom)
The circuit has unpopulated pads to add another transistor and another 2 LEDs for a total of 4 LEDs driven by a misterious syscon pin
2 pin1 @ CN101 Power Supply VCC +5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply
3 pin11 @ Syscon SW2-30x 4x WHITE LEDs, ground pins Inner light for power and eject switches, power LEDs with a currentlimitor resistor of 1K Ω, and eject LEDs with a currentlimitor resistor of 910 Ω
4 GND GND Ground
5 pin111 @ Syscon SW2-30x EJECT switch Sink to ground to activate
6 pin110 @ Syscon SW2-30x POWER switch Sink to ground to activate
7 pin5 @ Syscon SW2-30x GREEN led, ground pin Connects to left-bottom corner pin (green gnd) of dual red/green LED over power switch, with a currentlimitor resistor of 1K Ω
8 pin6 @ Syscon SW2-30x RED led, ground pin Connects to left-top corner pin (red gnd) of dual red/green LED over power switch, with a currentlimitor resistor of 1K2 Ω
9 pin 36 @ BD controller CXD5131R-1 BLUE led, ground pin Connects to blue LED over eject switch, with a currentlimitor resistor of 560 Ω
10 GND GND Ground