Difference between revisions of "Template:HSW-001 pinout"

From PS3 Developer wiki
Jump to: navigation, search
m
m
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{| class="wikitable"
 
{| class="wikitable"
|+HSW-001 Pinout {{ed right|HSW-001 pinout}}
+
|+[[HSW-001]] Pinout {{ed right|HSW-001 pinout}}
! rowspan="2" | Pin !! colspan="2" | Signal/Connected to !! rowspan="2" | Description
+
! rowspan="2" | Pin !! rowspan="2" | Name !! colspan="2" | Connected to !! rowspan="2" | Description
 
|-
 
|-
! On Motherboard !! On Switch board
+
! On [[Motherboard_Revisions|Motherboard]] !! On [[Switch_boards|Switch board]]
|-{{cellcolors|grey|#ffffff}}
 
| 1 || pin12 @ Syscon [[SW2-30x]] || 4x CONTOUR LEDs, transistor base pin || The transistor is located in the switch board and drives 2 LEDs with currentlimitor resistors of 3K {{ohm}} (red led at left-top) and 820 {{ohm}} (blue led at left-bottom)<br>The circuit has unpopulated pads to add another transistor and another 2 LEDs for a total of 4 LEDs driven by <abbr title="the line is inactive in all known working modes, the leds never emits light because syscon never sends the signal">a misterious syscon pin</abbr>
 
|-{{cellcolors|#cc3333|#ffffff}}
 
| 2 || pin1 @ CN101 [[Power Supply]] || VCC || +5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply
 
 
|-
 
|-
| 3 || pin11 @ Syscon [[SW2-30x]] || 4x WHITE LEDs, ground pins || Inner LEDs for power and eject switches, 2x power LEDs with a currentlimitor resistor of 1K {{ohm}}, and 2x eject LEDs with a currentlimitor resistor of 910 {{ohm}}
+
| 1 || {{cellcolors|darkgrey|white}} SW_PWM ? || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || 4x CONTOUR LEDs, transistor base pin || The transistor is located in the switch board and drives 2 LEDs with currentlimitor resistors of 3K {{ohm}} (red led at left-top) and 820 {{ohm}} (blue led at left-bottom)<br>The circuit has unpopulated pads to add another transistor and another 2 LEDs for a total of 4 LEDs driven by <abbr title="the line is inactive in all known working modes, the leds never emits light because syscon never sends the signal">a misterious syscon pin</abbr>
|-{{cellcolors|#333333|#ffffff}}
 
| 4 || GND || GND || Ground
 
 
|-
 
|-
| 5 || pin111 @ Syscon [[SW2-30x]] || EJECT switch || Sink to ground to activate
+
| 2 || {{cellcolors|#CC3333|white}} +5V_EVER || [[Power Supply]] Connector (CN101), pin 1 || VCC || 5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply
 
|-
 
|-
| 6 || pin110 @ Syscon [[SW2-30x]] || POWER switch || Sink to ground to activate
+
| rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds - || Inner LEDs for EJECT button backlight, with a currentlimitor resistor of 910 {{ohm}}
 
|-
 
|-
| 7 || pin5 @ Syscon [[SW2-30x]] || GREEN LED, ground pin || Connects to left-bottom corner pin (green gnd) of dual red/green LED located next to the power switch, with a currentlimitor resistor of 1K {{ohm}}
+
| 2x White leds - || Inner LEDs for POWER button backlight, with a currentlimitor resistor of 1K {{ohm}}
 
|-
 
|-
| 8 || pin6 @ Syscon [[SW2-30x]] || RED LED, ground pin || Connects to left-top corner pin (red gnd) of dual red/green LED located next to the power switch, with a currentlimitor resistor of 1K2 {{ohm}}
+
| 4 || {{cellcolors|#333333|white}} GND || GND || GND || Ground
 
|-
 
|-
| 9 || pin 36 @ BD controller [[CXD5131R-1]] || BLUE LED, ground pin || Connects to blue LED located next to the eject switch, with a currentlimitor resistor of 560 {{ohm}}
+
| 5 || EJECT_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 111 || Eject switch {{buttoneject}} || Sink to ground to activate
|-{{cellcolors|#333333|#ffffff}}
 
| 10 || GND || GND || Ground
 
 
|-
 
|-
 +
| 6 || POW_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 110 || Power switch {{buttonpower}} || Sink to ground to activate
 +
|-
 +
| 7 || POW_LED || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 5 || Green led - || Connects to left-bottom corner pin (green gnd) of ''dual red/green LED'' located next to the power switch, with a currentlimitor resistor of 1K {{ohm}}
 +
|-
 +
| 8 || STBY_LED || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 6 || Red led - || Connects to left-top corner pin (red gnd) of ''dual red/green LED'' located next to the power switch, with a currentlimitor resistor of 1K2 {{ohm}}
 +
|-
 +
| 9 || BD_LED || BluRay controller [[CXD5131R-1]], pin 36 (on [[SUR-001]]/[[JSD-001]])<br>''or''<br>BluRay controller [[R8J32830FPV1]], pin ?? (on [[JTP-001]])|| Blue led - || Connects to blue LED located next to the eject switch, with a currentlimitor resistor of 560 {{ohm}}
 +
|-
 +
| 10 || {{cellcolors|#333333|white}} GND || GND || GND || Ground
 
|}
 
|}
 
<noinclude>[[Category:Templates]]</noinclude>
 
<noinclude>[[Category:Templates]]</noinclude>

Latest revision as of 16:25, 5 December 2021

HSW-001 Pinout

Pin Name Connected to Description
On Motherboard On Switch board
1 SW_PWM ? Syscon SW2-30x, pin 12 4x CONTOUR LEDs, transistor base pin The transistor is located in the switch board and drives 2 LEDs with currentlimitor resistors of 3K Ω (red led at left-top) and 820 Ω (blue led at left-bottom)
The circuit has unpopulated pads to add another transistor and another 2 LEDs for a total of 4 LEDs driven by a misterious syscon pin
2 +5V_EVER Power Supply Connector (CN101), pin 1 VCC 5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply
3 ? Syscon SW2-30x, pin 11 2x White leds - Inner LEDs for EJECT button backlight, with a currentlimitor resistor of 910 Ω
2x White leds - Inner LEDs for POWER button backlight, with a currentlimitor resistor of 1K Ω
4 GND GND GND Ground
5 EJECT_SW Syscon SW2-30x, pin 111 Eject switch PS3 eject button Sink to ground to activate
6 POW_SW Syscon SW2-30x, pin 110 Power switch PS3 power button Sink to ground to activate
7 POW_LED Syscon SW2-30x, pin 5 Green led - Connects to left-bottom corner pin (green gnd) of dual red/green LED located next to the power switch, with a currentlimitor resistor of 1K Ω
8 STBY_LED Syscon SW2-30x, pin 6 Red led - Connects to left-top corner pin (red gnd) of dual red/green LED located next to the power switch, with a currentlimitor resistor of 1K2 Ω
9 BD_LED BluRay controller CXD5131R-1, pin 36 (on SUR-001/JSD-001)
or
BluRay controller R8J32830FPV1, pin ?? (on JTP-001)
Blue led - Connects to blue LED located next to the eject switch, with a currentlimitor resistor of 560 Ω
10 GND GND GND Ground