Template:Syscon pinout LQFP 128 pins

Pin #	Name		Type	Description	STBY Voltages
	NEC/Renesas	Sony/Custom
1	P142/SCK20/SCL20		←I	Connected to pin27 @Panasonic MN8647091	0
2	P141/PCLBUZ1/INTP7	SB_INT	←I/O→	SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?)	0
3	P140/PCLBUZ0/INTP6	BE_INT	←I/O→	BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V)	3.15
4	P120/INTP0/EXLVI		←I/O→	To +12V_MAIN through the resistor and divider	0
5	P37	POW_LED	←I/O→	Connected to dual led(Green) on switch board through the dual digital NPN trans. EMH1(SOT-563)	0
6	P36	STBY_LED	←I/O→	Connected to dual led(Red) on switch board through the dual digital NPN trans. EMH1(SOT-563)	3v @ standby (3.3V)
7	P35		←I/O→	Connected to pinAA18@SB	0
8	P34		←I/O→	Connected to pinAA17@SB	0
9	P33		←I/O→	CELL BE related?	0
10	P32		←I/O→		0
11	P163/TI13/TO13		←I/O→	Connected to Backlit LEDs on switch board	0
12	P162/TI12/TO12		←I/O→	Connected to CONTOUR LEDs on switch board	0
13	P161/TI11/TO11		←I/O→	Absent element between this line and GND. Nothing else.	0
14	P160/TI10/TO10		←I/O→		0
15	P47/INTP2		←I/O→		0
16	P46/INTP1/TI05/TO05	BUZZER	←I/O→		0
17	P45/SO01		←I/O→		0
18	P44/SI01		←I/O→	3v @ standby	3.0
19	P43/SCK01		←I/O→		0
20	P42/TI04/TO04		←I/O→		0
21	P41/TOOL1		←I/O→	Connected to Pin 13 @ Service Connector through a missing SMD component resistor/diode	3.0
22	P40/TOOL0	Debugger Pin?	←I/O→	Connected to Pin 7 @ Service Connector through a missing SMD component resistor/diode	0
23	P127/SO21		←I/O→		0
24	P126/SI21/SDA21	THR_I2C_SDA	←I/O→	Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line)	3v @ standby (3.15)
25	P125/SCK21/SCL21	THR_I2C_SCL	←I/O→	Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line)	3v @ standby (3.15)
26	RESET		←I	Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator 463A, pin 3
27	P124/XT2		←I	Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
28	P123/XT1		←I	Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
29	FLMD0		-	Connected to pin 8 @ Service Connector through a missing SMD component resistor/diode	3.33
30	P122/X2/EXCLK		←I	Connected to a small external oscilator 2 ?	0.8v @ standby (1.1)
31	P121/X1		←I	Connected to a small external oscilator 2 ?	2.2v @ standby (2.4)
32	REGC		←I/O→
33	VSS0	GROUND	-		0
34	EVSS0	GROUND	-		0
35	VDD		-	Connected to voltage regulator 463A, pin 2 (3.3_EVER_B)	3v @ standby (3.3)
36	EVDD0		-	Connected to voltage regulator 463A, pin 2 (3.3_EVER_B)	3v @ standby (3.3)
37	P60/SCL0		←I/O→	0.2v @ standby	0
38	P61/SDA0		←I/O→	0.2v @ standby	0
39	P62		←I/O→		0
40	P63		←I/O→		0
41	P31/TI03/TO03/INTP4	AC IN?	←I/O→	3v @ standby (3.3)	3.3
42	P64/RD		←I/O→	Connected (indirectly) to voltage regulator BD9684 0906, pin 4	0
43	P65/WR0		←I/O→	Connected to Pin 12 @ Service Connector through a missing SMD component resistor/diode	3.0
44	P66/WR1		←I/O→		0
45	P67/ASTB		←I/O→		0
46	P77/EX23/KR7/INTP11		←I/O→		0
47	P76/EX22/KR6/INTP10		←I/O→	3v @ standby (3.15)	3.15
48	P75/EX21/KR5/INTP9		←I/O→	3v @ standby (3.15)	3.15
49	P74/EX20/KR4/INTP8		←I/O→		0
50	P73/EX19/KR3		←I/O→	Connected to pin 3 @ Service Connector. And to voltage regulator D35653 0S25	0
51	P72/EX18/KR2		←I/O→		0
52	P71/EX17/KR1		←I/O→	Connected to voltage regulator BD3525, pin 12	0
53	P70/EX16/KR0		←I/O→		0
54	P06/WAIT		←I/O→		0
55	P05/CLKOUT		←I/O→		0
56	EVSS1	GROUND	-		0
57	EVDD1		-	Connected to voltage regulator 463A, pin 2 (3.3_EVER_B)	3v @ standby (3.3)
58	P80/EX0		←I/O→		0
59	P81/EX1		←I/O→		0
60	P82/EX2		←I/O→		0
61	P83/EX3		←I/O→		0
62	P84/EX4		←I/O→		0
63	P85/EX5		←I/O→		0
64	P86/EX6		←I/O→		0
65					0
66	INTP??				0
67					0
68					0
69					0
70					0
71					0
72					0
73					0
74					0
75				Connected to voltage regulator Mitsumi 040 810X, pin 5	0
76	P16			3v @ standby (3.15)	3.15
77	P15			3v @ standby (3.3)	3.3
78	SC_RxD(RxD3/RxD2/P14)			SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector through a missing SMD component resistor/diode, and to pin 6 @ PCI Connector	0
79	SC_TxD(TxD3/TxD2/P13)			SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector through a missing SMD component resistor/diode, and to pin 4 @ PCI Connector	3.3
80	P12/EX26/SO00/TxD0			SO from Cell Slave to Syscon Master	0
81	P11 P11/EX25/SI00/RxD0			SI from Syscon Master to Cell Slave	1.2
82	P10/EX24/SCK00			Serial Clock	0
83	P90			Chip Select	2.0
84	P91			3v @ standby	3.0
85					0
86					0
87					0
88	P95/SCK11/SCL11				0
89	/SI11/SDA11				0
90	P97/SO11				0
91					0
92				Connected to voltage regulator BD3527 (near FLASH), pin 12	0
93					0
94					0
95				Connected to voltage regulator BD3527 (near USB), pin 12	0
96					0
97	P101			Connected to voltage regulator 463A, pin 2 (3.3_EVER_B)	3v @ standby (3.3)
98					0
99					0
100	P146			Connected to voltage regulator 463A, pin 2 (3.3_EVER_B)	3v @ standby (3.3)
101	GROUND				0
102					0
103					0
104					0
105					0
106					0
107					0
108					0
109	P150			3v @ standby	3.0
110	P27/POW_SW_DET			Power switch detect. Connected to switch board	3v @ standby (3.3) 3.3
111	P26/EJECT_SW_DET			Eject switch detect. Connected to switch board	3v @ standby (3.3) 3.3
112					0
113					0
114					0
115					0
116					0
117	P20			(0V?)	0
118	P130/ACDC_STBY			Connected to standby voltage regulator 348A, pins 2 and 7 EN_HDMI ?	3v @ standby (3.3)
119	P102				3v @ standby (3.3)
120					0
121	P04/SCK10/SCL10				0
122	SI10/RxD1/SDA10				0
123	P02/SO10/TxD1				0
124				Connected to pin93 @Panasonic MN8647091	0
125					0
126	P145/FAN_PWM			PWM Control for the Fan.	0
127	P144/SO20/TxD2				0
128	/SI20/RxD2/SDA20			Connected to pin29 @Panasonic MN8647091	0