Difference between revisions of "Template:Syscon pinout LQFP 128 pins"

From PS3 Developer wiki
Jump to: navigation, search
m (I was reserving blue color for SPI buses)
 
(22 intermediate revisions by the same user not shown)
Line 5: Line 5:
  
 
<div style="overflow:auto; <includeonly>height:1400px;</includeonly>">
 
<div style="overflow:auto; <includeonly>height:1400px;</includeonly>">
{|class="wikitable mw-datatable sortable" style="width:100%"
+
{|class="wikitable mw-datatable sortable" style="width:100%; line-height:120%; font-size:90%"
 
|+ {{captionlinks|Syscon pinout LQFP 128 pins}}
 
|+ {{captionlinks|Syscon pinout LQFP 128 pins}}
 
|-
 
|-
! rowspan="2" | Pin# !! rowspan="2" | Port !! colspan="2" class="unsortable" | Name !! rowspan="2" class="unsortable" | Type !! rowspan="2" class="unsortable" | Description !! rowspan="2" class="unsortable" | STBY Voltages
+
! rowspan="2" style="width:35px; min-width:35px; padding:0px; background-position:50% 85%" | Pin !! rowspan="2" style="width:35px; min-width:35px; padding:0px; background-position:50% 85%" | Port !! colspan="2" class="unsortable" | Name !! rowspan="2" class="unsortable" | Type !! rowspan="2" class="unsortable" | Description !! rowspan="2" style="width:140px;" class="unsortable" | STBY Voltages
 
|-
 
|-
 
! class="unsortable" | <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! class="unsortable" | Sony/Custom
 
! class="unsortable" | <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! class="unsortable" | Sony/Custom
 
|-
 
|-
| 1 || 14 || {{cellcolors|#808080|#FF4500}} <s>P142/<span style="text-decoration: overline;">SCK20</span>/</s>SCL20  || HDMI_I2C_SCL ? || ←I || Related with syscon pin#128 ?. Connected to pin#27 @Panasonic [[MN8647091]] (HDMI controller CEC data I2C channel ?) || 0
+
| 1 || 14 || {{cellcolors|#6666ff|#ffff00}} <s>P142/<span style="text-decoration: overline;">SCK20</span>/</s>SCL20  || HDMI_I2C_SCL ? || ←I || Connected to [[HDMI]] controller [[MN8647091]] pin 27 || 0
 
|-
 
|-
| 2 || 14 || <s>P141/PCLBUZ1/</s>INTP7 || SB_INT/SYSCSINT || ←I || Connected to pinD1@SB [[CXD9963GB]] through the resistor || ~1V @ standby (0 V?)
+
| 2 || 14 || <s>P141/PCLBUZ1/</s>INTP7 || SB_INT/SYSCSINT || ←I || Connected to [[South Bridge]] [[CXD9963GB]] pad D1 through a resistor || ~1V @ standby (0 V?)
 
|-
 
|-
| 3 || 14 || <s>P140/PCLBUZ0/</s>INTP6 || BE_INT/ATTENTION || ←I || Connected to pinBA17@[[CELL BE|BE]] through the NPN transistor (CELL switches the transistor to connect this pin to GND) || 3V @ standby (3.15V)
+
| 3 || 14 || <s>P140/PCLBUZ0/</s>INTP6 || BE_INT/ATTENTION || ←I || Connected to [[CELL BE|CELL]] pad BA17 through a NPN transistor (CELL switches the transistor to connect this pin to GND) || 3V @ standby (3.15V)
 
|-
 
|-
| 4 || 12 || P120/INTP0/EXLVI ||  || ←I/O→ || To +12V_MAIN through the resistor and divider (EXLVI config = External potential input for low-voltage detector ?) || 0
+
| 4 || 12 || {{cellcolors|#ff9933}} P120/INTP0/EXLVI ||  || ←I/O→ || Connected to +12V_MAIN through a resistor and divider (EXLVI config = External potential input for low-voltage detector ?) || 0
 
|-
 
|-
| 5 || 3 || {{cellcolors|#d699ff}} P37 || POW_LED || O→ || Connected to dual led(Green) on [[switch boards|Switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
+
| 5 || 3 || {{cellcolors|#ffff88}} P37 || POW_LED || O→ || Connected to [[switch boards|Switch board]] dual led (Green) through a dual digital NPN transistor EMH1(SOT-563) || 0
 
|-
 
|-
| 6 || 3 || {{cellcolors|#d699ff}} P36 || STBY_LED || O→ || Connected to dual led(Red) on [[switch boards|Switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
+
| 6 || 3 || {{cellcolors|#ffff88}} P36 || STBY_LED || O→ || Connected to [[switch boards|Switch board]] dual led (Red) through a dual digital NPN transistor EMH1(SOT-563) || 3v @ standby (3.3V)
 
|-
 
|-
| 7 || 3 || P35 ||  || ←I/O→ || Connected to pinAA18@SB [[CXD9963GB]] || 0
+
| 7 || 3 || P35 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad AA18 || 0
 
|-
 
|-
| 8 || 3 || P34 ||  || ←I/O→ || Connected to pinAA17@SB [[CXD9963GB]] || 0
+
| 8 || 3 || P34 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad AA17 || 0
 
|-
 
|-
 
| 9 || 3 || P33 ||  || ←I/O→ || CELL BE related? || 0
 
| 9 || 3 || P33 ||  || ←I/O→ || CELL BE related? || 0
Line 32: Line 32:
 
| 10 || 3 || P32 ||  || ←I/O→ ||  || 0
 
| 10 || 3 || P32 ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 11 || 16 || {{cellcolors|#d699ff}} <s>P163/TI13/</s>TO13 || BACK_LEDS || O→ || Connected to Backlit LEDs on [[switch boards|Switch board]] || 0
+
| 11 || 16 || {{cellcolors|#ffff88}} <s>P163/TI13/</s>TO13 || BACK_LEDS || O→ || Connected to [[switch boards|Switch board]] backlit LEDs through a transistor || 0
 
|-
 
|-
| 12 || 16 || {{cellcolors|#d699ff}} <s>P162/TI12/</s>TO12 || CONTOUR_LEDS/SW_PWM ? || O→ || Connected to CONTOUR LEDs on [[switch boards|Switch board]] || 0
+
| 12 || 16 || {{cellcolors|#ffff88}} <s>P162/TI12/</s>TO12 || SW_PWM ? || O→ || Connected to [[switch boards|Switch board]] contour LEDs through a transistor || 0
 
|-
 
|-
| 13 || 16 || {{cellcolors|#e0e0e0}} <s>P161/TI11/TO11</s> || NOT_CONNECTED || - || Disconnected to GND through a missing SMD component. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|NOWHERE]] || 0
+
| 13 || 16 || {{cellcolors|#e0e0e0}} <s>P161/TI11/TO11</s> || || - || NOT_CONNECTED. <abbr title="The board circuit is designed to connect this pin to GND through a missing component>Floating</abbr> through a missing SMD component. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|NOWHERE]] || 0
 
|-
 
|-
| 14 || 16 || {{cellcolors|#e0e0e0}} <s>P160/TI10/TO10</s> || NOT_CONNECTED || - || Disconnected to GND through a missing SMD component at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] || 0
+
| 14 || 16 || {{cellcolors|#e0e0e0}} <s>P160/TI10/TO10</s> || || - || NOT_CONNECTED. <abbr title="The board circuit is designed to connect this pin to GND through a missing component>Floating</abbr> through a missing SMD component at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] || 0
 
|-
 
|-
| 15 || 4 || {{cellcolors|#408040|#ffffff}} P47/INTP2 || WIFI_CTRL/BT_WAKEON ? || ←I/O→ || Connected to Wifi/BT module || 0
+
| 15 || 4 || {{cellcolors|#d699ff|#ffffff}} P47/INTP2 || BT_WAKEON ? || ←I/O→ || Connected to [[Wifi|Wifi/BT]] module || 0
 
|-
 
|-
| 16 || 4 || {{cellcolors|#123456|#ffffff}} <s>P46/INTP1/TI05/</s>TO05 || BUZZER || O→ || Connected to the base of a transistor that drives a pin of the buzzer to GND || 0
+
| 16 || 4 || {{cellcolors|#123456|#ffffff}} <s>P46/INTP1/TI05/</s>TO05 || BUZZER || O→ || Connected to the Buzzer through a transistor || 0
 
|-
 
|-
| 17 || 4 || {{cellcolors|#8888ff|#FF4500}} P45/SO01 ||  || ←I/O→ || SB_SPI_DO @[[CXD9963GB]] ? || 0
+
| 17 || 4 || {{cellcolors|#3333ff|#cc8888}} P45/SO01 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_DO) || 0
 
|-
 
|-
| 18 || 4 || {{cellcolors|#8888ff|#FF4500}} P44/SI01 ||  || ←I/O→ || SB_SPI_DI @[[CXD9963GB]] ? || 3v @ standby
+
| 18 || 4 || {{cellcolors|#3333ff|#cc8888}} P44/SI01 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_DI) || 3v @ standby
 
|-
 
|-
| 19 || 4 || {{cellcolors|#8888ff|#FF4500}} P43/<span style="text-decoration: overline;">SCK01</span> ||  || ←I/O→ || SB_SPI_CLK @[[CXD9963GB]] ? || 0
+
| 19 || 4 || {{cellcolors|#3333ff|#cc8888}} P43/<span style="text-decoration: overline;">SCK01</span> ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_CLK) || 0
 
|-
 
|-
| 20 || 4 || {{cellcolors|#8888ff|#FF4500}} P42/TI04/TO04 ||  || ←I/O→ || SB_SPI_CS @[[CXD9963GB]] ? || 0
+
| 20 || 4 || {{cellcolors|#3333ff|#cc8888}} P42/TI04/TO04 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_CS) || 0
 
|-
 
|-
| 21 || 4 || {{cellcolors|#aa7744}} <s>P41/</s>TOOL1 || TOOL_CLK || O→ || Tool clock. Connected to Pin 13 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 3.0
+
| 21 || 4 || {{cellcolors|#aa7744}} <s>P41/</s>TOOL1 || TOOL_CLK || O→ || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 13 (Tool clock) through a missing resistor || 3.0
 
|-
 
|-
| 22 || 4 || {{cellcolors|#aa7744}} <s>P40/</s>TOOL0 || TOOL_DAT || ←I/O→ || Tool Data. Connected to Pin 7 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 0
+
| 22 || 4 || {{cellcolors|#aa7744}} <s>P40/</s>TOOL0 || TOOL_DAT || ←I/O→ || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 7 (Tool Data) through a missing resistor || 0
 
|-
 
|-
 
| 23 || 12 || P127/SO21 ||  || ←I/O→ ||  || 0
 
| 23 || 12 || P127/SO21 ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 24 || 12 || {{cellcolors|#808080|#FF4500}} <s>P126/SI21/</s>SDA21 || THR_I2C_SDA || ←I/O→ || SMBus data. Connected to pin 7 of CELL/RSX temperature monitors [[Thermal#Temperature_Monitors|TMP411A/B]] || 3v @ standby (3.15)
+
| 24 || 12 || {{cellcolors|#6666ff|#ffff00}} <s>P126/SI21/</s>SDA21 || THR_I2C_SDA || ←I/O→ || Connected to [[Thermal#Temperature_Monitors|Temperature Monitors]] pin 7 and [[South Bridge]] pad ? (SMBus data) || 3v @ standby (3.15)
 
|-
 
|-
| 25 || 12 || {{cellcolors|#808080|#FF4500}} <s>P125/SCK21/</s>SCL21 || THR_I2C_SCL || O→ || SMBus clock. Connected to pin 8 of CELL/RSX temperature monitors [[Thermal#Temperature_Monitors|TMP411A/B]] || 3v @ standby (3.15)
+
| 25 || 12 || {{cellcolors|#6666ff|#ffff00}} <s>P125/SCK21/</s>SCL21 || THR_I2C_SCL || O→ || Connected to [[Thermal#Temperature_Monitors|Temperature Monitors]] pin 8 and [[South Bridge]] pad ? (SMBus clock) || 3v @ standby (3.15)
 
|-
 
|-
| 26 ||  || {{cellcolors|#aa7744}} <span style="text-decoration: overline;">RESET</span> || RESET || ←I || Connected to Pin 9 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators|463A]], pin 3 ||  
+
| 26 ||  || {{cellcolors|#aa7744}} <span style="text-decoration: overline;">RESET</span> || RESET || ←I || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 9 through a missing resistor<br>Connected to standby voltage regulator [[Talk:Regulators|463A]] pin 3 ||  
 
|-
 
|-
| 27 || 12 || {{cellcolors|#ff77bb}} <s>P124/</s>XT2 || XT_SUB/OSCOUT ? || ←I || Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?) ||  
+
| 27 || 12 || {{cellcolors|#444444|#ffffff}} <s>P124/</s>XT2 || XT_SUB/OSCOUT ? || ←I || Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz) ||  
 
|-
 
|-
| 28 || 12 || {{cellcolors|#ff77bb}} <s>P123/</s>XT1 || XT_SUB/OSCIN ? || ←I || Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?)  ||  
+
| 28 || 12 || {{cellcolors|#444444|#ffffff}} <s>P123/</s>XT1 || XT_SUB/OSCIN ? || ←I || Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz)  ||  
 
|-
 
|-
| 29 ||  || {{cellcolors|#aa7744}} FLMD0 || FLASH_MODE || - || Flash programming mode. Connected to pin 8 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 3.33
+
| 29 ||  || {{cellcolors|#aa7744}} FLMD0 || FLASH_MODE || - || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 8 (Flash programming mode) through a missing resistor || 3.33
 
|-
 
|-
| 30 || 12 || {{cellcolors|#ff77bb}} <s>P122/</s>X2<s>/EXCLK</s> || XT_MAIN/XTAL ? || ←I || Main system clock. Connected to a tiny metallic crystal marked "EX" (16.9344Mhz?) || 0.8v @ standby (1.1)
+
| 30 || 12 || {{cellcolors|#444444|#ffffff}} <s>P122/</s>X2<s>/EXCLK</s> || XT_MAIN/XTAL ? || ←I || Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) || 0.8v @ standby (1.1)
 
|-
 
|-
| 31 || 12 || {{cellcolors|#ff77bb}} <s>P121/</s>X1 || XT_MAIN/EXTAL ? || ←I || Main system clock. Connected to a tiny metallic crystal marked "EX" (16.9344Mhz?) || 2.2v @ standby (2.4)
+
| 31 || 12 || {{cellcolors|#444444|#ffffff}} <s>P121/</s>X1 || XT_MAIN/EXTAL ? || ←I || Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) || 2.2v @ standby (2.4)
 
|-
 
|-
| 32 ||  || {{cellcolors|#ff9933}} REGC || VREG_CAP || - || Capacitor for the internal voltage regulator. Connected to ground through a capacitor (<abbr title="The user manual suggest 0.47 up to 1uF. Meassured onboard results in 1.28uF">around 1uF</abbr>) at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]]. And 2 diodes to battery+ ||  
+
| 32 ||  || {{cellcolors|#ff9933}} REGC || VREG_CAP || - || Connected to battery+ through 2 diodes<br>Connected to a capacitor (<abbr title="The user manual suggest 0.47 up to 1uF. Meassured onboard results in 1.28uF">internal voltage regulator, around 1uF</abbr>) at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] ||  
 
|-
 
|-
 
| 33 ||  || {{cellcolors|#333333|#ffffff}} V<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
 
| 33 ||  || {{cellcolors|#333333|#ffffff}} V<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
Line 80: Line 80:
 
| 34 ||  || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
 
| 34 ||  || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
 
|-
 
|-
| 35 ||  || {{cellcolors|#ff3333|#ffffff}} V<span style="font-size:60%;">DD</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
+
| 35 ||  || {{cellcolors|#ff3333|#ffffff}} V<span style="font-size:60%;">DD</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]] pin 2 || 3v @ standby (3.3)
 
|-
 
|-
| 36 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
+
| 36 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]] pin 2 || 3v @ standby (3.3)
 
|-
 
|-
| 37 || 6 || {{cellcolors|#808080|#FF4500}} <s>P60/</s>SCL0 || MK_I2C_SCL || ←I/O→ || Connected to Texas Instruments-SCEI Clock Generator [[CDC972]] pin 37 || 0.2v @ standby
+
| 37 || 6 || {{cellcolors|#6666ff|#ffff00}} <s>P60/</s>SCL0 || MK_I2C_SCL || ←I/O→ || Connected to Texas Instruments-SCEI Clock Generator [[CDC972]] pin 37 || 0.2v @ standby
 
|-
 
|-
| 38 || 6 || {{cellcolors|#808080|#FF4500}} <s>P61/</s>SDA0 || MK_I2C_SDA || ←I/O→ || Connected to Texas Instruments-SCEI Clock Generator [[CDC972]] pin 38 || 0.2v @ standby
+
| 38 || 6 || {{cellcolors|#6666ff|#ffff00}} <s>P61/</s>SDA0 || MK_I2C_SDA || ←I/O→ || Connected to Texas Instruments-SCEI Clock Generator [[CDC972]] pin 38 || 0.2v @ standby
 
|-
 
|-
! colspan="7" data-sort-value="38.5"|
+
! colspan="7" style="padding:1px" data-sort-value="38.5"|
 
|-
 
|-
 
| 39 || 6 || P62 ||  || ←I/O→ ||  || 0
 
| 39 || 6 || P62 ||  || ←I/O→ ||  || 0
Line 94: Line 94:
 
| 40 || 6 || {{cellcolors|#c0c0c0}} P63 || P63_DOWN || ←I || 10K resistor to GND || 0
 
| 40 || 6 || {{cellcolors|#c0c0c0}} P63 || P63_DOWN || ←I || 10K resistor to GND || 0
 
|-
 
|-
| 41 || 3 || {{cellcolors|#ff9933}} <s>P31/TI03/TO03/</s>INTP4 || ACIN_DET || ←I || Connected to pin 4 of the [[Power Supply|PSU]] control connector. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|CECH-25xx/SW2/SwitchBoard/PSU schematic]] || 3v @ standby (3.3)
+
| 41 || 3 || {{cellcolors|#ff9933}} <s>P31/TI03/TO03/</s>INTP4 || ACIN_DET || ←I || Connected to [[Power Supply]] control connector pin 4 through a transistor. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|schematic]] || 3v @ standby (3.3)
 
|-
 
|-
| 42 || 6 || {{cellcolors|#33cc33|#ffffff}} P64/<span style="text-decoration: overline;">RD</span> ||  || ←I/O→ || Connected (indirectly) to voltage regulator [[Talk:Regulators | BD9684 0906]], pin 4 (enable something) || 0
+
| 42 || 6 || {{cellcolors|#33cc33|#ffffff}} P64/<span style="text-decoration: overline;">RD</span> ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD9684 0906]] pin 4 (enable something) through some undocumented components || 0
 
|-
 
|-
| 43 || 6 || {{cellcolors|#aa7744}} P65/<span style="text-decoration: overline;">WR0</span> ||  || ←I/O→ || Connected to Pin 12 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 3.0
+
| 43 || 6 || {{cellcolors|#aa7744}} P65/<span style="text-decoration: overline;">WR0</span> ||  || ←I/O→ || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 12 through a missing resistor  || 3.0
 
|-
 
|-
 
| 44 || 6 || P66/<span style="text-decoration: overline;">WR1</span> ||  || ←I/O→ ||  || 0
 
| 44 || 6 || P66/<span style="text-decoration: overline;">WR1</span> ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 45 || 6 || {{cellcolors|#e0e0e0}} <s>P67/ASTB</s> || NOT_CONNECTED || - ||  || 0
+
| 45 || 6 || {{cellcolors|#e0e0e0}} <s>P67/ASTB</s> || || - || NOT_CONNECTED. || 0
 
|-
 
|-
 
| 46 || 7 || P77/EX23/KR7/INTP11 ||  || ←I/O→ ||  || 0
 
| 46 || 7 || P77/EX23/KR7/INTP11 ||  || ←I/O→ ||  || 0
Line 112: Line 112:
 
| 49 || 7 || {{cellcolors|#c0c0c0}} <s>P74/EX20/KR4/</s>INTP8 || INTP8_DOWN || ←I || 10K resistor to GND || 0
 
| 49 || 7 || {{cellcolors|#c0c0c0}} <s>P74/EX20/KR4/</s>INTP8 || INTP8_DOWN || ←I || 10K resistor to GND || 0
 
|-
 
|-
| 50 || 7 || {{cellcolors|#aa7744}} P73/EX19/KR3 ||  || ←I/O→ || Connected to pin 3 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]]. And to voltage regulator [[Talk:Regulators | D35653 0S25]] (FLASH_ENABLE ?) || 0
+
| 50 || 7 || {{cellcolors|#aa7744}} P73/EX19/KR3 ||  || ←I/O→ || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 3<br>Connected to voltage regulator [[Talk:Regulators | D35653 0S25]] (FLASH_ENABLE ?) || 0
 
|-
 
|-
| 51 || 7 || P72/EX18/KR2 ||  || ←I/O→ || || 0
+
| 51 || 7 || P72/EX18/KR2 ||  || ←I/O→ || Connected to xxxxxxxxxxxxxx through <abbr title="Labeled 98 KC, located at the opposite side of the clock generator texas-instrument CDC972">transistor</abbr> || 0
 
|-
 
|-
| 52 || 7 || {{cellcolors|#33cc33|#ffffff}} P71/EX17/KR1 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3525]]pin 12 (enable something) || 0
+
| 52 || 7 || {{cellcolors|#33cc33|#ffffff}} P71/EX17/KR1 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3525]] pin 12 (enable something) || 0
 
|-
 
|-
 
| 53 || 7 || P70/EX16/KR0 ||  || ←I/O→ ||  || 0
 
| 53 || 7 || P70/EX16/KR0 ||  || ←I/O→ ||  || 0
Line 126: Line 126:
 
| 56 ||  || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS1</span> || GND || - ||  || 0
 
| 56 ||  || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS1</span> || GND || - ||  || 0
 
|-
 
|-
| 57 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
+
| 57 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]] pin 2 || 3v @ standby (3.3)
 
|-  
 
|-  
 
| 58 || 8 || P80/EX0 ||  || ←I/O→ ||  || 0
 
| 58 || 8 || P80/EX0 ||  || ←I/O→ ||  || 0
Line 142: Line 142:
 
| 64 || 8 || P86/EX6 ||  || ←I/O→ ||  || 0
 
| 64 || 8 || P86/EX6 ||  || ←I/O→ ||  || 0
 
|-
 
|-
! colspan="7" data-sort-value="64.5"|
+
! colspan="7" style="padding:1px" data-sort-value="64.5"|
 
|-
 
|-
 
| 65 || 8 || P87/EX7 ||  || ←I/O→ ||  || 0
 
| 65 || 8 || P87/EX7 ||  || ←I/O→ ||  || 0
Line 164: Line 164:
 
| 74 || 5 || P57/EX15 ||  || ←I/O→ ||  || 0
 
| 74 || 5 || P57/EX15 ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 75 || 1 || {{cellcolors|#33cc33|#ffffff}} P17/EX31/TI02/TO02 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | Mitsumi 040 810X]]pin 5 || 0
+
| 75 || 1 || {{cellcolors|#33cc33|#ffffff}} P17/EX31/TI02/TO02 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | Mitsumi 040 810X]] pin 5 || 0
 
|-
 
|-
 
| 76 || 1 || P16/EX30/TI01/TO01/INTP5 ||  || ←I/O→ ||  || 3v @ standby (3.15)
 
| 76 || 1 || P16/EX30/TI01/TO01/INTP5 ||  || ←I/O→ ||  || 3v @ standby (3.15)
Line 170: Line 170:
 
| 77 || 1 || P15/EX29/RTCDIV/RTCCL ||  || ←I/O→ ||  || 3v @ standby (3.3)
 
| 77 || 1 || P15/EX29/RTCDIV/RTCCL ||  || ←I/O→ ||  || 3v @ standby (3.3)
 
|-
 
|-
| 78 || 1 || {{cellcolors|#aa7744}} <s>P14/EX28/</s>RxD3 || SC_RxD || ←I || SC_RxD UART (terminal).Connected to Pin 11 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode, and to pin 6 @ [[PCI]] Connector || 0
+
| 78 || 1 || {{cellcolors|#aa7744}} <s>P14/EX28/</s>RxD3 || SC_RxD || ←I || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 11 (UART-TTL terminal Receive) through a missing resistor<br>Connected to [[PCI]] Connector pin 6 || 0
 
|-
 
|-
| 79 || 1 || {{cellcolors|#aa7744}} <s>P13/EX27/</s>TxD3 || SC_TxD || O→ || SC_TxD UART (terminal).Connected to Pin 10 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode, and to pin 4 @ [[PCI]] Connector || 3.3
+
| 79 || 1 || {{cellcolors|#aa7744}} <s>P13/EX27/</s>TxD3 || SC_TxD || O→ || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 10 (UART-TTL terminal Transmit) through a missing resistor<br>Connected to [[PCI]] Connector pin 4 || 3.3
 
|-
 
|-
| 80 || 1 || {{cellcolors|#8888ff|#FF4500}} <s>P12/EX26/</s>SO00<s>/TxD0</s> || BE_SPI_DI || O→ || (MOSI) Serial Output from Syscon Master to Cell Slave || 0
+
| 80 || 1 || {{cellcolors|#3333ff|#cc8888}} <s>P12/EX26/</s>SO00<s>/TxD0</s> || BE_SPI_DI || O→ || Connected to [[CELL BE|CELL]] pad. (MOSI) Serial Output from Syscon Master to Cell Slave || 0
 
|-
 
|-
| 81 || 1 || {{cellcolors|#8888ff|#FF4500}} <s>P11/EX25/</s>SI00<s>/RxD0</s> || BE_SPI_DO || ←I || (MISO) Serial Input from Cell Slave to Syscon Master || 1.2
+
| 81 || 1 || {{cellcolors|#3333ff|#cc8888}} <s>P11/EX25/</s>SI00<s>/RxD0</s> || BE_SPI_DO || ←I || Connected to [[CELL BE|CELL]] pad. (MISO) Serial Input from Cell Slave to Syscon Master || 1.2
 
|-
 
|-
| 82 || 1 || {{cellcolors|#8888ff|#FF4500}} <s>P10/EX24/</s><span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK || || 2.5 Mhz SPI Clock ||
+
| 82 || 1 || {{cellcolors|#3333ff|#cc8888}} <s>P10/EX24/</s><span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK || || Connected to [[CELL BE|CELL]] pad. 2.5 Mhz SPI Clock ||
 
|-
 
|-
| 83 || 9 || {{cellcolors|#8888ff|#FF4500}} P90/EX32 || /BE_SPI_CS || ←I/O→ || Chip Select || 2.0
+
| 83 || 9 || {{cellcolors|#3333ff|#cc8888}} P90/EX32 || /BE_SPI_CS || ←I/O→ || Connected to [[CELL BE|CELL]] pad. Chip Select || 2.0
 
|-
 
|-
 
| 84 || 9 || P91/EX33 ||  || ←I/O→ ||  || 3v @ standby
 
| 84 || 9 || P91/EX33 ||  || ←I/O→ ||  || 3v @ standby
Line 188: Line 188:
 
| 86 || 9 || P93/EX35 ||  || ←I/O→ ||  || 0
 
| 86 || 9 || P93/EX35 ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 87 || 9 || {{cellcolors|#8888ff|#FF4500}} P94 ||  || ←I/O→ || RSX_SPI_CS ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AW8@]] || 0
+
| 87 || 9 || {{cellcolors|#3333ff|#cc8888}} P94 ||  || ←I/O→ || Connected to [[RSX]] pad AW8 ? (RSX_SPI_CS). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AW8]] || 0
 
|-
 
|-
| 88 || 9 || {{cellcolors|#8888ff|#FF4500}} P95/<span style="text-decoration: overline;">SCK11</span>/SCL11 ||  || ←I/O→ || RSX_SPI_CLK ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AY8@]] || 0
+
| 88 || 9 || {{cellcolors|#3333ff|#cc8888}} P95/<span style="text-decoration: overline;">SCK11</span>/SCL11 ||  || ←I/O→ || Connected to [[RSX]] pad AY8 ? (RSX_SPI_CLK ). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AY8]] || 0
 
|-
 
|-
| 89 || 9 || {{cellcolors|#8888ff|#FF4500}} P96/SI11/SDA11 ||  || ←I/O→ || RSX_SPI_DI ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA7@]] || 0
+
| 89 || 9 || {{cellcolors|#3333ff|#cc8888}} P96/SI11/SDA11 ||  || ←I/O→ || Connected to [[RSX]] pad BA7 ? (RSX_SPI_DI). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA7]] || 0
 
|-
 
|-
| 90 || 9 || {{cellcolors|#8888ff|#FF4500}} P97/SO11 ||  || ←I/O→ || RSX_SPI_DO ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA6@]] || 0
+
| 90 || 9 || {{cellcolors|#3333ff|#cc8888}} P97/SO11 ||  || ←I/O→ || Connected to [[RSX]] pad BS6 ? (RSX_SPI_DO). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA6]] || 0
 
|-
 
|-
 
| 91 || 11 || P112 ||  || ←I/O→ ||  || 0
 
| 91 || 11 || P112 ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 92 || 11 || {{cellcolors|#33cc33|#ffffff}} P113 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527 (near FLASH)]],  pin 12 || 0
+
| 92 || 11 || {{cellcolors|#33cc33|#ffffff}} P113 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527]] pin 12 (located near FLASH) || 0
 
|-
 
|-
 
| 93 || 11 || P114 ||  || ←I/O→ ||  || 0
 
| 93 || 11 || P114 ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 94 || 11 || P115 ||  || ←I/O→ || || 0
+
| 94 || 11 || P115 ||  || ←I/O→ || Connected to xxxxxxxxxxxxxx through <abbr title="Labeled 33N AE6, located at the opposite side of the clock generator texas-instrument CDC972">transistor</abbr> || 0
 
|-
 
|-
| 95 || 11 || {{cellcolors|#33cc33|#ffffff}} P116 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527 (near USB)]],  pin 12 || 0
+
| 95 || 11 || {{cellcolors|#33cc33|#ffffff}} P116 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527]] pin 12 (located near USB) || 0
 
|-
 
|-
| 96 || 11 || P117 || || ←I/O→ ||  || 0
+
| 96 || 11 || {{cellcolors|#339933|#ffffff}} P117 || AV_EN || O→ ||  Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 3 (+5V output) through a <abbr title="Labeled 5A KC">transistor</abbr> || 0
 
|-
 
|-
| 97 ||  || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
+
| 97 ||  || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]] pin 2 || 3v @ standby (3.3)
 
|-
 
|-
| 98 || 11 || {{cellcolors|#e0e0e0}} <s>P110/ANO0</s> || NOT_CONNECTED || - ||  || 0
+
| 98 || 11 || {{cellcolors|#e0e0e0}} <s>P110/ANO0</s> || || - || NOT_CONNECTED. || 0
 
|-
 
|-
| 99 || 11 || {{cellcolors|#e0e0e0}} <s>P111/ANO1</s> || NOT_CONNECTED || - ||  || 0
+
| 99 || 11 || {{cellcolors|#e0e0e0}} <s>P111/ANO1</s> || || - || NOT_CONNECTED. || 0
 
|-
 
|-
| 100 ||  || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
+
| 100 ||  || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]] pin 2 || 3v @ standby (3.3)
 
|-
 
|-
 
| 101 ||  || {{cellcolors|#333333|#ffffff}} AV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
 
| 101 ||  || {{cellcolors|#333333|#ffffff}} AV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
Line 220: Line 220:
 
| 102 || 15 || {{cellcolors|#c0c0c0}} <s>P157/</s>ANI15 || ANI15_DOWN || ←I || 100k resistor to GND. And to a missing SMD component to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) <!-- Interesting, the circuit is designed to pull this pin up or down, is down by default but im wondering what does the pullup o0--> || 0
 
| 102 || 15 || {{cellcolors|#c0c0c0}} <s>P157/</s>ANI15 || ANI15_DOWN || ←I || 100k resistor to GND. And to a missing SMD component to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) <!-- Interesting, the circuit is designed to pull this pin up or down, is down by default but im wondering what does the pullup o0--> || 0
 
|-
 
|-
! colspan="7" data-sort-value="102.5"|
+
! colspan="7" style="padding:1px" data-sort-value="102.5"|
 
|-
 
|-
 
| 103 || 15 || {{cellcolors|#c0c0c0}} <s>P156/</s>ANI14 || ANI14_UP || ←I || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 0
 
| 103 || 15 || {{cellcolors|#c0c0c0}} <s>P156/</s>ANI14 || ANI14_UP || ←I || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 0
Line 226: Line 226:
 
| 104 || 15 || {{cellcolors|#c0c0c0}} <s>P155/</s>ANI13 || ANI13_DOWN || ←I || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to GND || 0
 
| 104 || 15 || {{cellcolors|#c0c0c0}} <s>P155/</s>ANI13 || ANI13_DOWN || ←I || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to GND || 0
 
|-
 
|-
| 105 || 15 || {{cellcolors|#e0e0e0}} <s>P154/ANI12</s> || NOT_CONNECTED || - ||  || 0
+
| 105 || 15 || {{cellcolors|#e0e0e0}} <s>P154/ANI12</s> || || - || NOT_CONNECTED. || 0
 
|-
 
|-
| 106 || 15 || {{cellcolors|#e0e0e0}} <s>P153/ANI11</s> || NOT_CONNECTED || - ||  || 0
+
| 106 || 15 || {{cellcolors|#e0e0e0}} <s>P153/ANI11</s> || || - || NOT_CONNECTED. || 0
 
|-
 
|-
| 107 || 15 || {{cellcolors|#e0e0e0}} <s>P152/ANI10</s> || NOT_CONNECTED || - ||  || 0
+
| 107 || 15 || {{cellcolors|#e0e0e0}} <s>P152/ANI10</s> || || - || NOT_CONNECTED. || 0
 
|-
 
|-
| 108 || 15 || {{cellcolors|#e0e0e0}} <s>P151/ANI9</s> || NOT_CONNECTED || - ||  || 0
+
| 108 || 15 || {{cellcolors|#e0e0e0}} <s>P151/ANI9</s> || || - || NOT_CONNECTED. || 0
 
|-
 
|-
 
| 109 || 15 || {{cellcolors|#c0c0c0}} <s>P150/</s>ANI8 || ANI8_UP_UNK || ←I || Connected to an unknown track. And to 10k resistor to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 3v @ standby
 
| 109 || 15 || {{cellcolors|#c0c0c0}} <s>P150/</s>ANI8 || ANI8_UP_UNK || ←I || Connected to an unknown track. And to 10k resistor to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 3v @ standby
 
|-
 
|-
| 110 || 2 || {{cellcolors|#d699ff}} <s>P27/</s>ANI7 || POW_SW || ←I || Power switch detect. Connected to [[switch boards|Switch board]] || 3v @ standby (3.3) 3.3
+
| 110 || 2 || {{cellcolors|#ffff88}} <s>P27/</s>ANI7 || POW_SW || ←I || Connected to [[switch boards|Switch board]] power switch || 3v @ standby (3.3) 3.3
 
|-
 
|-
| 111 || 2 || {{cellcolors|#d699ff}} <s>P26/</s>ANI6 || EJECT_SW || ←I || Eject switch detect. Connected to [[switch boards|Switch board]] || 3v @ standby (3.3) 3.3
+
| 111 || 2 || {{cellcolors|#ffff88}} <s>P26/</s>ANI6 || EJECT_SW || ←I || Connected to [[switch boards|Switch board]] eject switch || 3v @ standby (3.3) 3.3
 
|-
 
|-
| 112 || 2 || {{cellcolors|#408040|#ffffff}} P25/ANI5 || WIFI_DATA_1 || ←I/O→ || Connected to Wifi/BT module || 0
+
| 112 || 2 || {{cellcolors|#d699ff|#ffffff}} P25/ANI5 || WIFI_DATA_1 || ←I/O→ || Connected to [[Wifi|Wifi/BT]] module || 0
 
|-
 
|-
| 113 || 2 || {{cellcolors|#408040|#ffffff}} P24/ANI4 || WIFI_DATA_2 || ←I/O→ || Connected to Wifi/BT module || 0
+
| 113 || 2 || {{cellcolors|#d699ff|#ffffff}} P24/ANI4 || WIFI_DATA_2 || ←I/O→ || Connected to [[Wifi|Wifi/BT]] module || 0
 
|-
 
|-
 
| 114 || 2 || P23/ANI3 ||  || ←I/O→ ||  || 0
 
| 114 || 2 || P23/ANI3 ||  || ←I/O→ ||  || 0
Line 252: Line 252:
 
| 117 || 2 || P20/ANI0 ||  || ←I/O→ ||  || (0V?)
 
| 117 || 2 || P20/ANI0 ||  || ←I/O→ ||  || (0V?)
 
|-
 
|-
| 118 || 13 || {{cellcolors|#ff9933}} P130 || ACDC_STBY || O→ || Connected to pin 3 of the [[Power Supply|PSU]] control connector. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|CECH-25xx/SW2/SwitchBoard/PSU schematic]] || 3v @ standby (3.3)
+
| 118 || 13 || {{cellcolors|#ff9933}} P130 || ACDC_STBY || O→ || Connected to [[Power Supply]] control connector pin 3 through a 2K2ohm resistor. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|schematic]] || 3v @ standby (3.3)
 
|-
 
|-
| 119 || 13 || {{cellcolors|#33cc33|#ffffff}} P131/TI06/TO06 || || ←I/O→ || Connected to voltage regulator [[Talk:Regulators|348A]], pins 2 and 7 (EN_HDMI & EN_AV together ?... in other words, enable video output) || 3v @ standby (3.3)
+
| 119 || 13 || {{cellcolors|#339933|#ffffff}} P131<s>/TI06/TO06</s> || HDMI_EN || O→ || Connected to [[HDMI]] controller [[MN8647091]] (primary and secondary power inputs) through voltage regulator [[Talk:Regulators|348A]] pins 2 and 7<br>Connected to [[HDMI]] [[Connectors#HDMI_Out|connector]] pin 18 (+5V output) through a <abbr title="Labeled AROKE, located next to the HDMI connector, it have a thick copper trace for a voltage of the HDMI connector)>transistor</abbr> || 3v @ standby (3.3)
 
|-
 
|-
 
| 120 || 0 || P07 ||  || ←I/O→ ||  || 0
 
| 120 || 0 || P07 ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 121 || 0 || {{cellcolors|#808080|#FF4500}} <s>P04/<span style="text-decoration: overline;">SCK10</span>/</s>SCL10 || DVE_I2C_SCL || ←I/O→ || Connected to [[CXM4027R]] pin 35 || 0
+
| 121 || 0 || {{cellcolors|#6666ff|#ffff00}} <s>P04/<span style="text-decoration: overline;">SCK10</span>/</s>SCL10 || DVE_I2C_SCL || ←I/O→ || Connected to [[MultiAV|Digital Video Encoder]] [[CXM4027R]] pin 35 || 0
 
|-
 
|-
| 122 || 0 || {{cellcolors|#808080|#FF4500}} <s>P03/SI10/RxD1/</s>SDA10 || DVE_I2C_SDA || ←I/O→ || Connected to [[CXM4027R]] pin 36 || 0
+
| 122 || 0 || {{cellcolors|#6666ff|#ffff00}} <s>P03/SI10/RxD1/</s>SDA10 || DVE_I2C_SDA || ←I/O→ || Connected to [[MultiAV|Digital Video Encoder]] [[CXM4027R]] pin 36 || 0
 
|-
 
|-
 
| 123 || 0 || P02/SO10/TxD1 ||  || ←I/O→ ||  || 0
 
| 123 || 0 || P02/SO10/TxD1 ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 124 || 0 || P01/TO00 ||  || ←I/O→ || Connected to pin93 @Panasonic [[MN8647091]] || 0
+
| 124 || 0 || P01/TO00 ||  || ←I/O→ || Connected to [[HDMI]] controller [[MN8647091]] pin 93 || 0
 
|-
 
|-
 
| 125 || 0 || P00/TI00 ||  || ←I/O→ ||  || 0
 
| 125 || 0 || P00/TI00 ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 126 || 14 || {{cellcolors|#123456|#ffffff}} <s>P145/TI07/</s>TO07 || FANPWM0 || O→ || PWM Control for the Fan. || 0
+
| 126 || 14 || {{cellcolors|#123456|#ffffff}} <s>P145/TI07/</s>TO07 || FANPWM0 || O→ || Connected to the [[Cooling|FAN]] grey wire (PWM duty) || 0
 
|-
 
|-
 
| 127 || 14 || P144/SO20/TxD2 ||  || ←I/O→ ||  || 0
 
| 127 || 14 || P144/SO20/TxD2 ||  || ←I/O→ ||  || 0
 
|-
 
|-
| 128 || 14 || {{cellcolors|#808080|#FF4500}} <s>P143/SI20/RxD2/</s>SDA20 || HDMI_I2C_SDA ? || ←I/O→ || Related with syscon pin#1 ?. Connected to pin#29 @Panasonic [[MN8647091]] (HDMI controller CEC data I2C channel) || 0
+
| 128 || 14 || {{cellcolors|#6666ff|#ffff00}} <s>P143/SI20/RxD2/</s>SDA20 || HDMI_I2C_SDA ? || ←I/O→ || Connected to [[HDMI]] controller [[MN8647091]] pin 29 || 0
 
|}</div><noinclude>[[Category:Templates]]</noinclude>
 
|}</div><noinclude>[[Category:Templates]]</noinclude>

Latest revision as of 17:54, 19 January 2022


Pinout


Syscon pinout LQFP 128 pins
NEC/Renesas 78K0R/KH3 Optional pin configurations

Syscon SW2-303 unsoldered
CECH-25xx with JTP-001 or JSD-001 motherboard

Syscon SW2-303
CECH-25xx with JTP-001 or JSD-001 motherboard

Syscon SW-301
CECHLxx with VER-001 motherboard

Syscon pinout LQFP 128 pins

Pin Port Name Type Description STBY Voltages
NEC/Renesas Sony/Custom
1 14 P142/SCK20/SCL20 HDMI_I2C_SCL ? ←I Connected to HDMI controller MN8647091 pin 27 0
2 14 P141/PCLBUZ1/INTP7 SB_INT/SYSCSINT ←I Connected to South Bridge CXD9963GB pad D1 through a resistor ~1V @ standby (0 V?)
3 14 P140/PCLBUZ0/INTP6 BE_INT/ATTENTION ←I Connected to CELL pad BA17 through a NPN transistor (CELL switches the transistor to connect this pin to GND) 3V @ standby (3.15V)
4 12 P120/INTP0/EXLVI ←I/O→ Connected to +12V_MAIN through a resistor and divider (EXLVI config = External potential input for low-voltage detector ?) 0
5 3 P37 POW_LED O→ Connected to Switch board dual led (Green) through a dual digital NPN transistor EMH1(SOT-563) 0
6 3 P36 STBY_LED O→ Connected to Switch board dual led (Red) through a dual digital NPN transistor EMH1(SOT-563) 3v @ standby (3.3V)
7 3 P35 ←I/O→ Connected to South Bridge CXD9963GB pad AA18 0
8 3 P34 ←I/O→ Connected to South Bridge CXD9963GB pad AA17 0
9 3 P33 ←I/O→ CELL BE related? 0
10 3 P32 ←I/O→ 0
11 16 P163/TI13/TO13 BACK_LEDS O→ Connected to Switch board backlit LEDs through a transistor 0
12 16 P162/TI12/TO12 SW_PWM ? O→ Connected to Switch board contour LEDs through a transistor 0
13 16 P161/TI11/TO11 - NOT_CONNECTED. Floating through a missing SMD component. See: NOWHERE 0
14 16 P160/TI10/TO10 - NOT_CONNECTED. Floating through a missing SMD component at the other side of the board. See: VIA 0
15 4 P47/INTP2 BT_WAKEON ? ←I/O→ Connected to Wifi/BT module 0
16 4 P46/INTP1/TI05/TO05 BUZZER O→ Connected to the Buzzer through a transistor 0
17 4 P45/SO01 ←I/O→ Connected to South Bridge CXD9963GB ? (SB_SPI_DO) 0
18 4 P44/SI01 ←I/O→ Connected to South Bridge CXD9963GB ? (SB_SPI_DI) 3v @ standby
19 4 P43/SCK01 ←I/O→ Connected to South Bridge CXD9963GB ? (SB_SPI_CLK) 0
20 4 P42/TI04/TO04 ←I/O→ Connected to South Bridge CXD9963GB ? (SB_SPI_CS) 0
21 4 P41/TOOL1 TOOL_CLK O→ Connected to Service Connector 3rd Gen. pin 13 (Tool clock) through a missing resistor 3.0
22 4 P40/TOOL0 TOOL_DAT ←I/O→ Connected to Service Connector 3rd Gen. pin 7 (Tool Data) through a missing resistor 0
23 12 P127/SO21 ←I/O→ 0
24 12 P126/SI21/SDA21 THR_I2C_SDA ←I/O→ Connected to Temperature Monitors pin 7 and South Bridge pad ? (SMBus data) 3v @ standby (3.15)
25 12 P125/SCK21/SCL21 THR_I2C_SCL O→ Connected to Temperature Monitors pin 8 and South Bridge pad ? (SMBus clock) 3v @ standby (3.15)
26 RESET RESET ←I Connected to Service Connector 3rd Gen. pin 9 through a missing resistor
Connected to standby voltage regulator 463A pin 3
27 12 P124/XT2 XT_SUB/OSCOUT ? ←I Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz)
28 12 P123/XT1 XT_SUB/OSCIN ? ←I Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz)
29 FLMD0 FLASH_MODE - Connected to Service Connector 3rd Gen. pin 8 (Flash programming mode) through a missing resistor 3.33
30 12 P122/X2/EXCLK XT_MAIN/XTAL ? ←I Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) 0.8v @ standby (1.1)
31 12 P121/X1 XT_MAIN/EXTAL ? ←I Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) 2.2v @ standby (2.4)
32 REGC VREG_CAP - Connected to battery+ through 2 diodes
Connected to a capacitor (internal voltage regulator, around 1uF) at the other side of the board. See: VIA
33 VSS0 GND - 0
34 EVSS0 GND - 0
35 VDD 3.3_EVER_B - Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
36 EVDD0 3.3_EVER_B - Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
37 6 P60/SCL0 MK_I2C_SCL ←I/O→ Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 37 0.2v @ standby
38 6 P61/SDA0 MK_I2C_SDA ←I/O→ Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 38 0.2v @ standby
39 6 P62 ←I/O→ 0
40 6 P63 P63_DOWN ←I 10K resistor to GND 0
41 3 P31/TI03/TO03/INTP4 ACIN_DET ←I Connected to Power Supply control connector pin 4 through a transistor. See: schematic 3v @ standby (3.3)
42 6 P64/RD ←I/O→ Connected to voltage regulator BD9684 0906 pin 4 (enable something) through some undocumented components 0
43 6 P65/WR0 ←I/O→ Connected to Service Connector 3rd Gen. pin 12 through a missing resistor 3.0
44 6 P66/WR1 ←I/O→ 0
45 6 P67/ASTB - NOT_CONNECTED. 0
46 7 P77/EX23/KR7/INTP11 ←I/O→ 0
47 7 P76/EX22/KR6/INTP10 ←I/O→ 3v @ standby (3.15)
48 7 P75/EX21/KR5/INTP9 ←I/O→ 3v @ standby (3.15)
49 7 P74/EX20/KR4/INTP8 INTP8_DOWN ←I 10K resistor to GND 0
50 7 P73/EX19/KR3 ←I/O→ Connected to Service Connector 3rd Gen. pin 3
Connected to voltage regulator D35653 0S25 (FLASH_ENABLE ?)
0
51 7 P72/EX18/KR2 ←I/O→ Connected to xxxxxxxxxxxxxx through transistor 0
52 7 P71/EX17/KR1 ←I/O→ Connected to voltage regulator BD3525 pin 12 (enable something) 0
53 7 P70/EX16/KR0 ←I/O→ 0
54 0 P06/WAIT P06_DOWN ←I/O→ 45K resistor array to GND 0
55 0 P05/CLKOUT P05_DOWN ←I/O→ 45K resistor array to GND 0
56 EVSS1 GND - 0
57 EVDD1 3.3_EVER_B - Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
58 8 P80/EX0 ←I/O→ 0
59 8 P81/EX1 ←I/O→ 0
60 8 P82/EX2 ←I/O→ 0
61 8 P83/EX3 ←I/O→ 0
62 8 P84/EX4 ←I/O→ 0
63 8 P85/EX5 ←I/O→ 0
64 8 P86/EX6 ←I/O→ 0
65 8 P87/EX7 ←I/O→ 0
66 3 P30/INTP3/RTC1HZ ←I/O→ 0
67 5 P50/EX8 ←I/O→ 0
68 5 P51/EX9 ←I/O→ 0
69 5 P52/EX10 ←I/O→ 0
70 5 P53/EX11 ←I/O→ 0
71 5 P54/EX12 ←I/O→ 0
72 5 P55/EX13 ←I/O→ 0
73 5 P56/EX14 ←I/O→ 0
74 5 P57/EX15 ←I/O→ 0
75 1 P17/EX31/TI02/TO02 ←I/O→ Connected to voltage regulator Mitsumi 040 810X pin 5 0
76 1 P16/EX30/TI01/TO01/INTP5 ←I/O→ 3v @ standby (3.15)
77 1 P15/EX29/RTCDIV/RTCCL ←I/O→ 3v @ standby (3.3)
78 1 P14/EX28/RxD3 SC_RxD ←I Connected to Service Connector 3rd Gen. pin 11 (UART-TTL terminal Receive) through a missing resistor
Connected to PCI Connector pin 6
0
79 1 P13/EX27/TxD3 SC_TxD O→ Connected to Service Connector 3rd Gen. pin 10 (UART-TTL terminal Transmit) through a missing resistor
Connected to PCI Connector pin 4
3.3
80 1 P12/EX26/SO00/TxD0 BE_SPI_DI O→ Connected to CELL pad. (MOSI) Serial Output from Syscon Master to Cell Slave 0
81 1 P11/EX25/SI00/RxD0 BE_SPI_DO ←I Connected to CELL pad. (MISO) Serial Input from Cell Slave to Syscon Master 1.2
82 1 P10/EX24/SCK00 BE_SPI_CLK Connected to CELL pad. 2.5 Mhz SPI Clock
83 9 P90/EX32 /BE_SPI_CS ←I/O→ Connected to CELL pad. Chip Select 2.0
84 9 P91/EX33 ←I/O→ 3v @ standby
85 9 P92/EX34 ←I/O→ 0
86 9 P93/EX35 ←I/O→ 0
87 9 P94 ←I/O→ Connected to RSX pad AW8 ? (RSX_SPI_CS). See: Template:RSX pad layout 41x41 and pad AW8 0
88 9 P95/SCK11/SCL11 ←I/O→ Connected to RSX pad AY8 ? (RSX_SPI_CLK ). See: Template:RSX pad layout 41x41 and pad AY8 0
89 9 P96/SI11/SDA11 ←I/O→ Connected to RSX pad BA7 ? (RSX_SPI_DI). See: Template:RSX pad layout 41x41 and pad BA7 0
90 9 P97/SO11 ←I/O→ Connected to RSX pad BS6 ? (RSX_SPI_DO). See: Template:RSX pad layout 41x41 and pad BA6 0
91 11 P112 ←I/O→ 0
92 11 P113 ←I/O→ Connected to voltage regulator BD3527 pin 12 (located near FLASH) 0
93 11 P114 ←I/O→ 0
94 11 P115 ←I/O→ Connected to xxxxxxxxxxxxxx through transistor 0
95 11 P116 ←I/O→ Connected to voltage regulator BD3527 pin 12 (located near USB) 0
96 11 P117 AV_EN O→ Connected to MultiAV connector pin 3 (+5V output) through a transistor 0
97 AVREF1 3.3_EVER_B - Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
98 11 P110/ANO0 - NOT_CONNECTED. 0
99 11 P111/ANO1 - NOT_CONNECTED. 0
100 AVREF0 3.3_EVER_B - Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
101 AVSS0 GND - 0
102 15 P157/ANI15 ANI15_DOWN ←I 100k resistor to GND. And to a missing SMD component to VIA to pin 8 of voltage regulator 463A (3.3_EVER_A) 0
103 15 P156/ANI14 ANI14_UP ←I VIA to 100k resistor to pin 8 of voltage regulator 463A (3.3_EVER_A) 0
104 15 P155/ANI13 ANI13_DOWN ←I VIA to 100k resistor to GND 0
105 15 P154/ANI12 - NOT_CONNECTED. 0
106 15 P153/ANI11 - NOT_CONNECTED. 0
107 15 P152/ANI10 - NOT_CONNECTED. 0
108 15 P151/ANI9 - NOT_CONNECTED. 0
109 15 P150/ANI8 ANI8_UP_UNK ←I Connected to an unknown track. And to 10k resistor to VIA to pin 8 of voltage regulator 463A (3.3_EVER_A) 3v @ standby
110 2 P27/ANI7 POW_SW ←I Connected to Switch board power switch 3v @ standby (3.3) 3.3
111 2 P26/ANI6 EJECT_SW ←I Connected to Switch board eject switch 3v @ standby (3.3) 3.3
112 2 P25/ANI5 WIFI_DATA_1 ←I/O→ Connected to Wifi/BT module 0
113 2 P24/ANI4 WIFI_DATA_2 ←I/O→ Connected to Wifi/BT module 0
114 2 P23/ANI3 ←I/O→ 0
115 2 P22/ANI2 ←I/O→ 0
116 2 P21/ANI1 ←I/O→ 0
117 2 P20/ANI0 ←I/O→ (0V?)
118 13 P130 ACDC_STBY O→ Connected to Power Supply control connector pin 3 through a 2K2ohm resistor. See: schematic 3v @ standby (3.3)
119 13 P131/TI06/TO06 HDMI_EN O→ Connected to HDMI controller MN8647091 (primary and secondary power inputs) through voltage regulator 348A pins 2 and 7
Connected to HDMI connector pin 18 (+5V output) through a transistor
3v @ standby (3.3)
120 0 P07 ←I/O→ 0
121 0 P04/SCK10/SCL10 DVE_I2C_SCL ←I/O→ Connected to Digital Video Encoder CXM4027R pin 35 0
122 0 P03/SI10/RxD1/SDA10 DVE_I2C_SDA ←I/O→ Connected to Digital Video Encoder CXM4027R pin 36 0
123 0 P02/SO10/TxD1 ←I/O→ 0
124 0 P01/TO00 ←I/O→ Connected to HDMI controller MN8647091 pin 93 0
125 0 P00/TI00 ←I/O→ 0
126 14 P145/TI07/TO07 FANPWM0 O→ Connected to the FAN grey wire (PWM duty) 0
127 14 P144/SO20/TxD2 ←I/O→ 0
128 14 P143/SI20/RxD2/SDA20 HDMI_I2C_SDA ? ←I/O→ Connected to HDMI controller MN8647091 pin 29 0