Template:Syscon pinout LQFP 128 pins: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
m (Added column for ports info)
m (Added port groups)
Line 10: Line 10:
! <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! Sony/Custom
! <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! Sony/Custom
|+ Syscon pinout LQFP 128 pins <span class="plainlinks" style="font-size:80%; float:right;">[ [[Template_talk:Syscon_pinout_LQFP_128_pins|Discuss]] ] or [ [{{fullurl:Template:Syscon_pinout_LQFP_128_pins|action=edit}} Edit] ]</span>
|+ Syscon pinout LQFP 128 pins <span class="plainlinks" style="font-size:80%; float:right;">[ [[Template_talk:Syscon_pinout_LQFP_128_pins|Discuss]] ] or [ [{{fullurl:Template:Syscon_pinout_LQFP_128_pins|action=edit}} Edit] ]</span>
| 1 || || P142/<span style="text-decoration: overline;">SCK20</span>/SCL20  ||  || ←I || Connected to pin27 @Panasonic [[MN8647091]] (HDMI controller CEC data channel related with pins 127 and 128 ?) || 0
| 1 || 14 || P142/<span style="text-decoration: overline;">SCK20</span>/SCL20  ||  || ←I || Connected to pin27 @Panasonic [[MN8647091]] (HDMI controller CEC data channel related with pins 127 and 128 ?) || 0
|-
|-
| 2 || || <s>P141/PCLBUZ1/</s>INTP7 || SB_INT/SYSCSINT || ←I || Connected to pinD1@SB [[CXD9963GB]] through the resistor || ~1V @ standby (0 V?)
| 2 || 14 || <s>P141/PCLBUZ1/</s>INTP7 || SB_INT/SYSCSINT || ←I || Connected to pinD1@SB [[CXD9963GB]] through the resistor || ~1V @ standby (0 V?)
|-
|-
| 3 || || <s>P140/PCLBUZ0/</s>INTP6 || BE_INT/ATTENTION || ←I || Connected to pinBA17@[[CELL BE|BE]] through the NPN transistor (CELL switches the transistor to connect this pin to GND) || 3V @ standby (3.15V)
| 3 || 14 || <s>P140/PCLBUZ0/</s>INTP6 || BE_INT/ATTENTION || ←I || Connected to pinBA17@[[CELL BE|BE]] through the NPN transistor (CELL switches the transistor to connect this pin to GND) || 3V @ standby (3.15V)
|-
|-
| 4 || || P120/INTP0/EXLVI ||  || ←I/O→ || To +12V_MAIN through the resistor and divider (EXLVI config = External potential input for low-voltage detector ?) || 0
| 4 || 12 || P120/INTP0/EXLVI ||  || ←I/O→ || To +12V_MAIN through the resistor and divider (EXLVI config = External potential input for low-voltage detector ?) || 0
|-
|-
| 5 || || {{cellcolors|#d699ff}} P37 || POW_LED || O→ || Connected to dual led(Green) on [[switch boards|Switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
| 5 || 3 || {{cellcolors|#d699ff}} P37 || POW_LED || O→ || Connected to dual led(Green) on [[switch boards|Switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
|-
|-
| 6 || || {{cellcolors|#d699ff}} P36 || STBY_LED || O→ || Connected to dual led(Red) on [[switch boards|Switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
| 6 || 3 || {{cellcolors|#d699ff}} P36 || STBY_LED || O→ || Connected to dual led(Red) on [[switch boards|Switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
|-
|-
| 7 || || P35 ||  || ←I/O→ || Connected to pinAA18@SB [[CXD9963GB]] || 0
| 7 || 3 || P35 ||  || ←I/O→ || Connected to pinAA18@SB [[CXD9963GB]] || 0
|-
|-
| 8 || || P34 ||  || ←I/O→ || Connected to pinAA17@SB [[CXD9963GB]] || 0
| 8 || 3 || P34 ||  || ←I/O→ || Connected to pinAA17@SB [[CXD9963GB]] || 0
|-
|-
| 9 || || P33 ||  || ←I/O→ || CELL BE related? || 0
| 9 || 3 || P33 ||  || ←I/O→ || CELL BE related? || 0
|-
|-
| 10 || || P32 ||  || ←I/O→ ||  || 0
| 10 || 3 || P32 ||  || ←I/O→ ||  || 0
|-
|-
| 11 || || {{cellcolors|#d699ff}} <s>P163/TI13/</s>TO13 || BACK_LEDS || O→ || Connected to Backlit LEDs on [[switch boards|Switch board]] || 0
| 11 || 16 || {{cellcolors|#d699ff}} <s>P163/TI13/</s>TO13 || BACK_LEDS || O→ || Connected to Backlit LEDs on [[switch boards|Switch board]] || 0
|-
|-
| 12 || || {{cellcolors|#d699ff}} <s>P162/TI12/</s>TO12 || CONTOUR_LEDS || O→ || Connected to CONTOUR LEDs on [[switch boards|Switch board]] || 0
| 12 || 16 || {{cellcolors|#d699ff}} <s>P162/TI12/</s>TO12 || CONTOUR_LEDS || O→ || Connected to CONTOUR LEDs on [[switch boards|Switch board]] || 0
|-
|-
| 13 || || {{cellcolors|#e0e0e0}} <s>P161/TI11/TO11</s> || NOT_CONNECTED || - || Disconnected to GND through a missing SMD component. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|NOWHERE]] || 0
| 13 || 16 || {{cellcolors|#e0e0e0}} <s>P161/TI11/TO11</s> || NOT_CONNECTED || - || Disconnected to GND through a missing SMD component. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|NOWHERE]] || 0
|-
|-
| 14 || || {{cellcolors|#e0e0e0}} <s>P160/TI10/TO10</s> || NOT_CONNECTED || - || Disconnected to GND through a missing SMD component at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] || 0
| 14 || 16 || {{cellcolors|#e0e0e0}} <s>P160/TI10/TO10</s> || NOT_CONNECTED || - || Disconnected to GND through a missing SMD component at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] || 0
|-
|-
| 15 || || P47/INTP2 ||  || ←I/O→ || Unknown purpose. The trace goes in the direction of the Wifi/BT module || 0
| 15 || 4 || P47/INTP2 ||  || ←I/O→ || Unknown purpose. The trace goes in the direction of the Wifi/BT module || 0
|-
|-
| 16 || || {{cellcolors|#123456|#ffffff}} <s>P46/INTP1/TI05/</s>TO05 || BUZZER || O→ || Connected to the base of a transistor that drives a pin of the buzzer to GND || 0
| 16 || 4 || {{cellcolors|#123456|#ffffff}} <s>P46/INTP1/TI05/</s>TO05 || BUZZER || O→ || Connected to the base of a transistor that drives a pin of the buzzer to GND || 0
|-
|-
| 17 || || P45/SO01 ||  || ←I/O→ || SB_SPI_DO @[[CXD9963GB]] ? || 0
| 17 || 4 || P45/SO01 ||  || ←I/O→ || SB_SPI_DO @[[CXD9963GB]] ? || 0
|-
|-
| 18 || || P44/SI01 ||  || ←I/O→ || SB_SPI_DI @[[CXD9963GB]] ? || 3v @ standby
| 18 || 4 || P44/SI01 ||  || ←I/O→ || SB_SPI_DI @[[CXD9963GB]] ? || 3v @ standby
|-
|-
| 19 || || P43/<span style="text-decoration: overline;">SCK01</span> ||  || ←I/O→ || SB_SPI_CLK @[[CXD9963GB]] ? || 0
| 19 || 4 || P43/<span style="text-decoration: overline;">SCK01</span> ||  || ←I/O→ || SB_SPI_CLK @[[CXD9963GB]] ? || 0
|-
|-
| 20 || || P42/TI04/TO04 ||  || ←I/O→ || SB_SPI_CS @[[CXD9963GB]] ? || 0
| 20 || 4 || P42/TI04/TO04 ||  || ←I/O→ || SB_SPI_CS @[[CXD9963GB]] ? || 0
|-
|-
| 21 || || {{cellcolors|#aa7744}} <s>P41/</s>TOOL1 || TOOL_CLK || O→ || Tool clock. Connected to Pin 13 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 3.0
| 21 || 4 || {{cellcolors|#aa7744}} <s>P41/</s>TOOL1 || TOOL_CLK || O→ || Tool clock. Connected to Pin 13 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 3.0
|-
|-
| 22 || || {{cellcolors|#aa7744}} <s>P40/</s>TOOL0 || TOOL_DAT || ←I/O→ || Tool Data. Connected to Pin 7 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 0
| 22 || 4 || {{cellcolors|#aa7744}} <s>P40/</s>TOOL0 || TOOL_DAT || ←I/O→ || Tool Data. Connected to Pin 7 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 0
|-
|-
| 23 || || P127/SO21 ||  || ←I/O→ ||  || 0
| 23 || 12 || P127/SO21 ||  || ←I/O→ ||  || 0
|-
|-
| 24 || || {{cellcolors|#808080|#FF4500}} <s>P126/SI21/</s>SDA21 || THR_I2C_SDA || ←I/O→ || SMBus data. Connected to pin 7 of CELL/RSX temperature monitors [[Thermal#Temperature_Monitors|TMP411A/B]] || 3v @ standby (3.15)
| 24 || 12 || {{cellcolors|#808080|#FF4500}} <s>P126/SI21/</s>SDA21 || THR_I2C_SDA || ←I/O→ || SMBus data. Connected to pin 7 of CELL/RSX temperature monitors [[Thermal#Temperature_Monitors|TMP411A/B]] || 3v @ standby (3.15)
|-
|-
| 25 || || {{cellcolors|#808080|#FF4500}} <s>P125/SCK21/</s>SCL21 || THR_I2C_SCL || O→ || SMBus clock. Connected to pin 8 of CELL/RSX temperature monitors [[Thermal#Temperature_Monitors|TMP411A/B]] || 3v @ standby (3.15)
| 25 || 12 || {{cellcolors|#808080|#FF4500}} <s>P125/SCK21/</s>SCL21 || THR_I2C_SCL || O→ || SMBus clock. Connected to pin 8 of CELL/RSX temperature monitors [[Thermal#Temperature_Monitors|TMP411A/B]] || 3v @ standby (3.15)
|-
|-
| 26 ||  || {{cellcolors|#aa7744}} <span style="text-decoration: overline;">RESET</span> || RESET || ←I || Connected to Pin 9 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators|463A]], pin 3 ||  
| 26 ||  || {{cellcolors|#aa7744}} <span style="text-decoration: overline;">RESET</span> || RESET || ←I || Connected to Pin 9 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators|463A]], pin 3 ||  
|-
|-
| 27 || || {{cellcolors|#ff77bb}} <s>P124/</s>XT2 || XT_SUB || ←I || Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?) ||  
| 27 || 12 || {{cellcolors|#ff77bb}} <s>P124/</s>XT2 || XT_SUB || ←I || Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?) ||  
|-
|-
| 28 || || {{cellcolors|#ff77bb}} <s>P123/</s>XT1 || XT_SUB || ←I || Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?)  ||  
| 28 || 12 || {{cellcolors|#ff77bb}} <s>P123/</s>XT1 || XT_SUB || ←I || Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?)  ||  
|-
|-
| 29 ||  || {{cellcolors|#aa7744}} FLMD0 || FLASH_MODE || - || Flash programming mode. Connected to pin 8 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 3.33
| 29 ||  || {{cellcolors|#aa7744}} FLMD0 || FLASH_MODE || - || Flash programming mode. Connected to pin 8 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 3.33
|-
|-
| 30 || || {{cellcolors|#ff77bb}} <s>P122/</s>X2<s>/EXCLK</s> || XT_MAIN || ←I || Main system clock. Connected to a tiny metallic crystal marked "EX" || 0.8v @ standby (1.1)
| 30 || 12 || {{cellcolors|#ff77bb}} <s>P122/</s>X2<s>/EXCLK</s> || XT_MAIN || ←I || Main system clock. Connected to a tiny metallic crystal marked "EX" || 0.8v @ standby (1.1)
|-
|-
| 31 || || {{cellcolors|#ff77bb}} <s>P121/</s>X1 || XT_MAIN || ←I || Main system clock. Connected to a tiny metallic crystal marked "EX" || 2.2v @ standby (2.4)
| 31 || 12 || {{cellcolors|#ff77bb}} <s>P121/</s>X1 || XT_MAIN || ←I || Main system clock. Connected to a tiny metallic crystal marked "EX" || 2.2v @ standby (2.4)
|-
|-
| 32 ||  || {{cellcolors|#ff9933}} REGC || VREG_CAP || - || Capacitor for the internal voltage regulator. Connected to ground through a capacitor (<abbr title="The user manual suggest 0.47 up to 1uF. Meassured onboard results in 1.28uF">around 1uF</abbr>) at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]]. And 2 diodes to battery+ ||  
| 32 ||  || {{cellcolors|#ff9933}} REGC || VREG_CAP || - || Capacitor for the internal voltage regulator. Connected to ground through a capacitor (<abbr title="The user manual suggest 0.47 up to 1uF. Meassured onboard results in 1.28uF">around 1uF</abbr>) at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]]. And 2 diodes to battery+ ||  
Line 82: Line 82:
| 36 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
| 36 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-
|-
| 37 || || P60/SCL0 ||  || ←I/O→ || Primary I2C bus. UNK_I2C_SCL ? (either HDMI, DVE, or MK) || 0.2v @ standby
| 37 || 6 || P60/SCL0 ||  || ←I/O→ || Primary I2C bus. UNK_I2C_SCL ? (either HDMI, DVE, or MK) || 0.2v @ standby
|-
|-
| 38 || || P61/SDA0 ||  || ←I/O→ || Primary I2C bus. UNK_I2C_SDA ? (either HDMI, DVE, or MK) || 0.2v @ standby
| 38 || 6 || P61/SDA0 ||  || ←I/O→ || Primary I2C bus. UNK_I2C_SDA ? (either HDMI, DVE, or MK) || 0.2v @ standby
|-
|-
! colspan="7" |  
! colspan="7" |  
|-
|-
| 39 || || P62 ||  || ←I/O→ ||  || 0
| 39 || 6 || P62 ||  || ←I/O→ ||  || 0
|-
|-
| 40 || || {{cellcolors|#c0c0c0}} P63 || P63_DOWN || ←I || 10K resistor to GND || 0
| 40 || 6 || {{cellcolors|#c0c0c0}} P63 || P63_DOWN || ←I || 10K resistor to GND || 0
|-
|-
| 41 || || {{cellcolors|#ff9933}} <s>P31/TI03/TO03/</s>INTP4 || ACIN_DET || ←I || Connected to pin 4 of the [[Power Supply|PSU]] control connector. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|CECH-25xx/SW2/SwitchBoard/PSU schematic]] || 3v @ standby (3.3)
| 41 || 3 || {{cellcolors|#ff9933}} <s>P31/TI03/TO03/</s>INTP4 || ACIN_DET || ←I || Connected to pin 4 of the [[Power Supply|PSU]] control connector. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|CECH-25xx/SW2/SwitchBoard/PSU schematic]] || 3v @ standby (3.3)
|-
|-
| 42 || || {{cellcolors|#33cc33|#ffffff}} P64/<span style="text-decoration: overline;">RD</span> ||  || ←I/O→ || Connected (indirectly) to voltage regulator [[Talk:Regulators | BD9684 0906]], pin 4 (enable something) || 0
| 42 || 6 || {{cellcolors|#33cc33|#ffffff}} P64/<span style="text-decoration: overline;">RD</span> ||  || ←I/O→ || Connected (indirectly) to voltage regulator [[Talk:Regulators | BD9684 0906]], pin 4 (enable something) || 0
|-
|-
| 43 || || {{cellcolors|#aa7744}} P65/<span style="text-decoration: overline;">WR0</span> ||  || ←I/O→ || Connected to Pin 12 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode  || 3.0
| 43 || 6 || {{cellcolors|#aa7744}} P65/<span style="text-decoration: overline;">WR0</span> ||  || ←I/O→ || Connected to Pin 12 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode  || 3.0
|-
|-
| 44 || || P66/<span style="text-decoration: overline;">WR1</span> ||  || ←I/O→ ||  || 0
| 44 || 6 || P66/<span style="text-decoration: overline;">WR1</span> ||  || ←I/O→ ||  || 0
|-
|-
| 45 || || {{cellcolors|#e0e0e0}} <s>P67/ASTB</s> || NOT_CONNECTED || - ||  || 0
| 45 || 6 || {{cellcolors|#e0e0e0}} <s>P67/ASTB</s> || NOT_CONNECTED || - ||  || 0
|-
|-
| 46 || || P77/EX23/KR7/INTP11 ||  || ←I/O→ ||  || 0
| 46 || 7 || P77/EX23/KR7/INTP11 ||  || ←I/O→ ||  || 0
|-
|-
| 47 || || P76/EX22/KR6/INTP10 ||  || ←I/O→ ||  || 3v @ standby (3.15)
| 47 || 7 || P76/EX22/KR6/INTP10 ||  || ←I/O→ ||  || 3v @ standby (3.15)
|-
|-
| 48 || || P75/EX21/KR5/INTP9 ||  || ←I/O→ ||  || 3v @ standby (3.15)
| 48 || 7 || P75/EX21/KR5/INTP9 ||  || ←I/O→ ||  || 3v @ standby (3.15)
|-
|-
| 49 || || {{cellcolors|#c0c0c0}} <s>P74/EX20/KR4/</s>INTP8 || INTP8_DOWN || ←I || 10K resistor to GND || 0
| 49 || 7 || {{cellcolors|#c0c0c0}} <s>P74/EX20/KR4/</s>INTP8 || INTP8_DOWN || ←I || 10K resistor to GND || 0
|-
|-
| 50 || || {{cellcolors|#aa7744}} P73/EX19/KR3 ||  || ←I/O→ || Connected to pin 3 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]]. And to voltage regulator [[Talk:Regulators | D35653 0S25]] (FLASH_ENABLE ?) || 0
| 50 || 7 || {{cellcolors|#aa7744}} P73/EX19/KR3 ||  || ←I/O→ || Connected to pin 3 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]]. And to voltage regulator [[Talk:Regulators | D35653 0S25]] (FLASH_ENABLE ?) || 0
|-
|-
| 51 || || P72/EX18/KR2 ||  || ←I/O→ ||  || 0
| 51 || 7 || P72/EX18/KR2 ||  || ←I/O→ ||  || 0
|-
|-
| 52 || || {{cellcolors|#33cc33|#ffffff}} P71/EX17/KR1 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3525]],  pin 12 (enable something) || 0
| 52 || 7 || {{cellcolors|#33cc33|#ffffff}} P71/EX17/KR1 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3525]],  pin 12 (enable something) || 0
|-
|-
| 53 || || P70/EX16/KR0 ||  || ←I/O→ ||  || 0
| 53 || 7 || P70/EX16/KR0 ||  || ←I/O→ ||  || 0
|-
|-
| 54 || || {{cellcolors|#c0c0c0}} P06<s>/<span style="text-decoration: overline;">WAIT</span></s> || P06_DOWN || ←I/O→ || 45K resistor array to GND || 0
| 54 || 0 || {{cellcolors|#c0c0c0}} P06<s>/<span style="text-decoration: overline;">WAIT</span></s> || P06_DOWN || ←I/O→ || 45K resistor array to GND || 0
|-
|-
| 55 || || {{cellcolors|#c0c0c0}} P05<s>/CLKOUT</s> || P05_DOWN || ←I/O→ || 45K resistor array to GND || 0
| 55 || 0 || {{cellcolors|#c0c0c0}} P05<s>/CLKOUT</s> || P05_DOWN || ←I/O→ || 45K resistor array to GND || 0
|-
|-
| 56 ||  || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS1</span> || GND || - ||  || 0
| 56 ||  || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS1</span> || GND || - ||  || 0
Line 126: Line 126:
| 57 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
| 57 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-  
|-  
| 58 || || P80/EX0 ||  || ←I/O→ ||  || 0
| 58 || 8 || P80/EX0 ||  || ←I/O→ ||  || 0
|-
|-
| 59 || || P81/EX1 ||  || ←I/O→ ||  || 0
| 59 || 8 || P81/EX1 ||  || ←I/O→ ||  || 0
|-
|-
| 60 || || P82/EX2 ||  || ←I/O→ ||  || 0
| 60 || 8 || P82/EX2 ||  || ←I/O→ ||  || 0
|-
|-
| 61 || || P83/EX3 ||  || ←I/O→ ||  || 0
| 61 || 8 || P83/EX3 ||  || ←I/O→ ||  || 0
|-
|-
| 62 || || P84/EX4 ||  || ←I/O→ ||  || 0
| 62 || 8 || P84/EX4 ||  || ←I/O→ ||  || 0
|-
|-
| 63 || || P85/EX5 ||  || ←I/O→ ||  || 0
| 63 || 8 || P85/EX5 ||  || ←I/O→ ||  || 0
|-
|-
| 64 || || P86/EX6 ||  || ←I/O→ ||  || 0
| 64 || 8 || P86/EX6 ||  || ←I/O→ ||  || 0
|-
|-
! colspan="7" |  
! colspan="7" |  
|-
|-
| 65 || || P87/EX7 ||  || ←I/O→ ||  || 0
| 65 || 8 || P87/EX7 ||  || ←I/O→ ||  || 0
|-
|-
| 66 || || P30/INTP3/RTC1HZ ||  || ←I/O→ || || 0
| 66 || 3 || P30/INTP3/RTC1HZ ||  || ←I/O→ || || 0
|-
|-
| 67 || || P50/EX8 ||  || ←I/O→ ||  || 0
| 67 || 5 || P50/EX8 ||  || ←I/O→ ||  || 0
|-
|-
| 68 || || P51/EX9 ||  || ←I/O→ ||  || 0
| 68 || 5 || P51/EX9 ||  || ←I/O→ ||  || 0
|-
|-
| 69 || || P52/EX10 ||  || ←I/O→ ||  || 0
| 69 || 5 || P52/EX10 ||  || ←I/O→ ||  || 0
|-
|-
| 70 || || P53/EX11 ||  || ←I/O→ ||  || 0
| 70 || 5 || P53/EX11 ||  || ←I/O→ ||  || 0
|-
|-
| 71 || || P54/EX12 ||  || ←I/O→ ||  || 0
| 71 || 5 || P54/EX12 ||  || ←I/O→ ||  || 0
|-
|-
| 72 || || P55/EX13 ||  || ←I/O→ ||  || 0
| 72 || 5 || P55/EX13 ||  || ←I/O→ ||  || 0
|-
|-
| 73 || || P56/EX14 ||  || ←I/O→ ||  || 0
| 73 || 5 || P56/EX14 ||  || ←I/O→ ||  || 0
|-
|-
| 74 || || P57/EX15 ||  || ←I/O→ ||  || 0
| 74 || 5 || P57/EX15 ||  || ←I/O→ ||  || 0
|-
|-
| 75 || || {{cellcolors|#33cc33|#ffffff}} P17/EX31/TI02/TO02 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | Mitsumi 040 810X]],  pin 5 || 0
| 75 || 1 || {{cellcolors|#33cc33|#ffffff}} P17/EX31/TI02/TO02 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | Mitsumi 040 810X]],  pin 5 || 0
|-
|-
| 76 || || P16/EX30/TI01/TO01/INTP5 ||  || ←I/O→ ||  || 3v @ standby (3.15)
| 76 || 1 || P16/EX30/TI01/TO01/INTP5 ||  || ←I/O→ ||  || 3v @ standby (3.15)
|-
|-
| 77 || || P15/EX29/RTCDIV/RTCCL ||  || ←I/O→ ||  || 3v @ standby (3.3)
| 77 || 1 || P15/EX29/RTCDIV/RTCCL ||  || ←I/O→ ||  || 3v @ standby (3.3)
|-
|-
| 78 || || {{cellcolors|#aa7744}} <s>P14/EX28/</s>RxD3 || SC_RxD || ←I || SC_RxD UART (terminal).Connected to Pin 11 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode, and to pin 6 @ [[PCI]] Connector || 0
| 78 || 1 || {{cellcolors|#aa7744}} <s>P14/EX28/</s>RxD3 || SC_RxD || ←I || SC_RxD UART (terminal).Connected to Pin 11 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode, and to pin 6 @ [[PCI]] Connector || 0
|-
|-
| 79 || || {{cellcolors|#aa7744}} <s>P13/EX27/</s>TxD3 || SC_TxD || O→ || SC_TxD UART (terminal).Connected to Pin 10 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode, and to pin 4 @ [[PCI]] Connector || 3.3
| 79 || 1 || {{cellcolors|#aa7744}} <s>P13/EX27/</s>TxD3 || SC_TxD || O→ || SC_TxD UART (terminal).Connected to Pin 10 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode, and to pin 4 @ [[PCI]] Connector || 3.3
|-
|-
| 80 || || <s>P12/EX26/</s>SO00<s>/TxD0</s> || BE_SPI_DO || O→ || SO from Cell Slave to Syscon Master || 0
| 80 || 1 || <s>P12/EX26/</s>SO00<s>/TxD0</s> || BE_SPI_DO || O→ || SO from Cell Slave to Syscon Master || 0
|-
|-
| 81 || || <s>P11/EX25/</s>SI00<s>/RxD0</s> || BE_SPI_DI || ←I || SI from Syscon Master to Cell Slave || 1.2
| 81 || 1 || <s>P11/EX25/</s>SI00<s>/RxD0</s> || BE_SPI_DI || ←I || SI from Syscon Master to Cell Slave || 1.2
|-
|-
| 82 || || <s>P10/EX24/</s><span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK ? || ←I/O→ || Serial Clock || 0
| 82 || 1 || <s>P10/EX24/</s><span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK ? || ←I/O→ || Serial Clock || 0
|-
|-
| 83 || || P90/EX32 || BE_SPI_CS ? || ←I/O→ || Chip Select || 2.0
| 83 || 9 || P90/EX32 || BE_SPI_CS ? || ←I/O→ || Chip Select || 2.0
|-
|-
| 84 || || P91/EX33 ||  || ←I/O→ ||  || 3v @ standby
| 84 || 9 || P91/EX33 ||  || ←I/O→ ||  || 3v @ standby
|-
|-
| 85 || || P92/EX34 ||  || ←I/O→ ||  || 0
| 85 || 9 || P92/EX34 ||  || ←I/O→ ||  || 0
|-
|-
| 86 || || P93/EX35 ||  || ←I/O→ ||  || 0
| 86 || 9 || P93/EX35 ||  || ←I/O→ ||  || 0
|-
|-
| 87 || || P94 ||  || ←I/O→ || RSX_SPI_CS ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AW8@]] || 0
| 87 || 9 || P94 ||  || ←I/O→ || RSX_SPI_CS ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AW8@]] || 0
|-
|-
| 88 || || P95/<span style="text-decoration: overline;">SCK11</span>/SCL11 ||  || ←I/O→ || RSX_SPI_CLK ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AY8@]] || 0
| 88 || 9 || P95/<span style="text-decoration: overline;">SCK11</span>/SCL11 ||  || ←I/O→ || RSX_SPI_CLK ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AY8@]] || 0
|-
|-
| 89 || || P96/SI11/SDA11 ||  || ←I/O→ || RSX_SPI_DI ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA7@]] || 0
| 89 || 9 || P96/SI11/SDA11 ||  || ←I/O→ || RSX_SPI_DI ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA7@]] || 0
|-
|-
| 90 || || P97/SO11 ||  || ←I/O→ || RSX_SPI_DO ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA6@]] || 0
| 90 || 9 || P97/SO11 ||  || ←I/O→ || RSX_SPI_DO ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA6@]] || 0
|-
|-
| 91 || || P112 ||  || ←I/O→ ||  || 0
| 91 || 11 || P112 ||  || ←I/O→ ||  || 0
|-
|-
| 92 || || {{cellcolors|#33cc33|#ffffff}} P113 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527 (near FLASH)]],  pin 12 || 0
| 92 || 11 || {{cellcolors|#33cc33|#ffffff}} P113 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527 (near FLASH)]],  pin 12 || 0
|-
|-
| 93 || || P114 ||  || ←I/O→ ||  || 0
| 93 || 11 || P114 ||  || ←I/O→ ||  || 0
|-
|-
| 94 || || P115 ||  || ←I/O→ ||  || 0
| 94 || 11 || P115 ||  || ←I/O→ ||  || 0
|-
|-
| 95 || || {{cellcolors|#33cc33|#ffffff}} P116 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527 (near USB)]],  pin 12 || 0
| 95 || 11 || {{cellcolors|#33cc33|#ffffff}} P116 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527 (near USB)]],  pin 12 || 0
|-
|-
| 96 || || P117 ||  || ←I/O→ ||  || 0
| 96 || 11 || P117 ||  || ←I/O→ ||  || 0
|-
|-
| 97 ||  || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
| 97 ||  || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-
|-
| 98 || || {{cellcolors|#e0e0e0}} <s>P110/ANO0</s> || NOT_CONNECTED || - ||  || 0
| 98 || 11 || {{cellcolors|#e0e0e0}} <s>P110/ANO0</s> || NOT_CONNECTED || - ||  || 0
|-
|-
| 99 || || {{cellcolors|#e0e0e0}} <s>P111/ANO1</s> || NOT_CONNECTED || - ||  || 0
| 99 || 11 || {{cellcolors|#e0e0e0}} <s>P111/ANO1</s> || NOT_CONNECTED || - ||  || 0
|-
|-
| 100 ||  || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
| 100 ||  || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
Line 216: Line 216:
| 101 ||  || {{cellcolors|#333333|#ffffff}} AV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
| 101 ||  || {{cellcolors|#333333|#ffffff}} AV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
|-
|-
| 102 || || {{cellcolors|#c0c0c0}} <s>P157/</s>ANI15 || ANI15_DOWN || ←I || 100k resistor to GND. And to a missing SMD component to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) <!-- Interesting, the circuit is designed to pull this pin up or down, is down by default but im wondering what does the pullup o0--> || 0
| 102 || 15 || {{cellcolors|#c0c0c0}} <s>P157/</s>ANI15 || ANI15_DOWN || ←I || 100k resistor to GND. And to a missing SMD component to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) <!-- Interesting, the circuit is designed to pull this pin up or down, is down by default but im wondering what does the pullup o0--> || 0
|-
|-
! colspan="7" |  
! colspan="7" |  
|-
|-
| 103 || || {{cellcolors|#c0c0c0}} <s>P156/</s>ANI14 || ANI14_UP || ←I || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 0
| 103 || 15 || {{cellcolors|#c0c0c0}} <s>P156/</s>ANI14 || ANI14_UP || ←I || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 0
|-
|-
| 104 || || {{cellcolors|#c0c0c0}} <s>P155/</s>ANI13 || ANI13_DOWN || ←I || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to GND || 0
| 104 || 15 || {{cellcolors|#c0c0c0}} <s>P155/</s>ANI13 || ANI13_DOWN || ←I || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to GND || 0
|-
|-
| 105 || || {{cellcolors|#e0e0e0}} <s>P154/ANI12</s> || NOT_CONNECTED || - ||  || 0
| 105 || 15 || {{cellcolors|#e0e0e0}} <s>P154/ANI12</s> || NOT_CONNECTED || - ||  || 0
|-
|-
| 106 || || {{cellcolors|#e0e0e0}} <s>P153/ANI11</s> || NOT_CONNECTED || - ||  || 0
| 106 || 15 || {{cellcolors|#e0e0e0}} <s>P153/ANI11</s> || NOT_CONNECTED || - ||  || 0
|-
|-
| 107 || || {{cellcolors|#e0e0e0}} <s>P152/ANI10</s> || NOT_CONNECTED || - ||  || 0
| 107 || 15 || {{cellcolors|#e0e0e0}} <s>P152/ANI10</s> || NOT_CONNECTED || - ||  || 0
|-
|-
| 108 || || {{cellcolors|#e0e0e0}} <s>P151/ANI9</s> || NOT_CONNECTED || - ||  || 0
| 108 || 15 || {{cellcolors|#e0e0e0}} <s>P151/ANI9</s> || NOT_CONNECTED || - ||  || 0
|-
|-
| 109 || || {{cellcolors|#c0c0c0}} <s>P150/</s>ANI8 || ANI8_UP_UNK || ←I || Connected to an unknown track. And to 10k resistor to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 3v @ standby
| 109 || 15 || {{cellcolors|#c0c0c0}} <s>P150/</s>ANI8 || ANI8_UP_UNK || ←I || Connected to an unknown track. And to 10k resistor to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 3v @ standby
|-
|-
| 110 || || {{cellcolors|#d699ff}} <s>P27/</s>ANI7 || POW_SW_DET || ←I || Power switch detect. Connected to [[switch boards|Switch board]] || 3v @ standby (3.3) 3.3
| 110 || 2 || {{cellcolors|#d699ff}} <s>P27/</s>ANI7 || POW_SW_DET || ←I || Power switch detect. Connected to [[switch boards|Switch board]] || 3v @ standby (3.3) 3.3
|-
|-
| 111 || || {{cellcolors|#d699ff}} <s>P26/</s>ANI6 || EJECT_SW_DET || ←I || Eject switch detect. Connected to [[switch boards|Switch board]] || 3v @ standby (3.3) 3.3
| 111 || 2 || {{cellcolors|#d699ff}} <s>P26/</s>ANI6 || EJECT_SW_DET || ←I || Eject switch detect. Connected to [[switch boards|Switch board]] || 3v @ standby (3.3) 3.3
|-
|-
| 112 || || P25/ANI5 ||  || ←I/O→ || Connected to Wifi/BT module, unknown pad || 0
| 112 || 2 || P25/ANI5 ||  || ←I/O→ || Connected to Wifi/BT module, unknown pad || 0
|-
|-
| 113 || || P24/ANI4 ||  || ←I/O→ || Connected to Wifi/BT module, unknown pad || 0
| 113 || 2 || P24/ANI4 ||  || ←I/O→ || Connected to Wifi/BT module, unknown pad || 0
|-
|-
| 114 || || P23/ANI3 ||  || ←I/O→ ||  || 0
| 114 || 2 || P23/ANI3 ||  || ←I/O→ ||  || 0
|-
|-
| 115 || || P22/ANI2 ||  || ←I/O→ ||  || 0
| 115 || 2 || P22/ANI2 ||  || ←I/O→ ||  || 0
|-
|-
| 116 || || P21/ANI1 ||  || ←I/O→ ||  || 0
| 116 || 2 || P21/ANI1 ||  || ←I/O→ ||  || 0
|-
|-
| 117 || || P20/ANI0 ||  || ←I/O→ ||  || (0V?)
| 117 || 2 || P20/ANI0 ||  || ←I/O→ ||  || (0V?)
|-
|-
| 118 || || {{cellcolors|#ff9933}} P130 || ACDC_STBY || O→ || Connected to pin 3 of the [[Power Supply|PSU]] control connector. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|CECH-25xx/SW2/SwitchBoard/PSU schematic]] || 3v @ standby (3.3)
| 118 || 13 || {{cellcolors|#ff9933}} P130 || ACDC_STBY || O→ || Connected to pin 3 of the [[Power Supply|PSU]] control connector. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|CECH-25xx/SW2/SwitchBoard/PSU schematic]] || 3v @ standby (3.3)
|-
|-
| 119 || || {{cellcolors|#33cc33|#ffffff}} P131/TI06/TO06 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators|348A]], pins 2 and 7 (EN_HDMI & EN_AV together ?... in other words, enable video output) || 3v @ standby (3.3)
| 119 || 13 || {{cellcolors|#33cc33|#ffffff}} P131/TI06/TO06 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators|348A]], pins 2 and 7 (EN_HDMI & EN_AV together ?... in other words, enable video output) || 3v @ standby (3.3)
|-
|-
| 120 || || P07 ||  || ←I/O→ ||  || 0
| 120 || 0 || P07 ||  || ←I/O→ ||  || 0
|-
|-
| 121 || || P04/<span style="text-decoration: overline;">SCK10</span>/SCL10 ||  || ←I/O→ ||  || 0
| 121 || 0 || P04/<span style="text-decoration: overline;">SCK10</span>/SCL10 ||  || ←I/O→ ||  || 0
|-
|-
| 122 || || P03/SI10/RxD1/SDA10 ||  || ←I/O→ ||  || 0
| 122 || 0 || P03/SI10/RxD1/SDA10 ||  || ←I/O→ ||  || 0
|-
|-
| 123 || || P02/SO10/TxD1 ||  || ←I/O→ ||  || 0
| 123 || 0 || P02/SO10/TxD1 ||  || ←I/O→ ||  || 0
|-
|-
| 124 || || P01/TO00 ||  || ←I/O→ || Connected to pin93 @Panasonic [[MN8647091]] || 0
| 124 || 0 || P01/TO00 ||  || ←I/O→ || Connected to pin93 @Panasonic [[MN8647091]] || 0
|-
|-
| 125 || || P00/TI00 ||  || ←I/O→ ||  || 0
| 125 || 0 || P00/TI00 ||  || ←I/O→ ||  || 0
|-
|-
| 126 || || {{cellcolors|#123456|#ffffff}} <s>P145/TI07/</s>TO07 || FAN_PWM || O→ || PWM Control for the Fan. || 0
| 126 || 14 || {{cellcolors|#123456|#ffffff}} <s>P145/TI07/</s>TO07 || FAN_PWM || O→ || PWM Control for the Fan. || 0
|-
|-
| 127 || || P144/SO20/TxD2 ||  || ←I/O→ || (HDMI controller CEC data channel related with pins 1 and 128 ?) || 0
| 127 || 14 || P144/SO20/TxD2 ||  || ←I/O→ || (HDMI controller CEC data channel related with pins 1 and 128 ?) || 0
|-
|-
| 128 || || P143/SI20/RxD2/SDA20 ||  || ←I/O→ || Connected to pin29 @Panasonic [[MN8647091]] (HDMI controller CEC data channel related with pins 1 and 127 ?) || 0
| 128 || 14 || P143/SI20/RxD2/SDA20 ||  || ←I/O→ || Connected to pin29 @Panasonic [[MN8647091]] (HDMI controller CEC data channel related with pins 1 and 127 ?) || 0
|}<includeonly></div></includeonly><noinclude>[[Category:Templates]]</noinclude>
|}<includeonly></div></includeonly><noinclude>[[Category:Templates]]</noinclude>

Revision as of 23:22, 26 June 2021


Pinout

Syscon pinout LQFP 128 pins
NEC/Renesas 78K0R/KH3 Optional pin configurations

Syscon SW2-303 unsoldered
CECH-25xx with JTP-001 or JSD-001 motherboard

Syscon SW2-303
CECH-25xx with JTP-001 or JSD-001 motherboard

Syscon SW-301
CECHLxx with VER-001 motherboard


Pin# Port Name Type Description STBY Voltages
NEC/Renesas Sony/Custom
Syscon pinout LQFP 128 pins [ Discuss ] or [ Edit ]
1 14 P142/SCK20/SCL20 ←I Connected to pin27 @Panasonic MN8647091 (HDMI controller CEC data channel related with pins 127 and 128 ?) 0
2 14 P141/PCLBUZ1/INTP7 SB_INT/SYSCSINT ←I Connected to pinD1@SB CXD9963GB through the resistor ~1V @ standby (0 V?)
3 14 P140/PCLBUZ0/INTP6 BE_INT/ATTENTION ←I Connected to pinBA17@BE through the NPN transistor (CELL switches the transistor to connect this pin to GND) 3V @ standby (3.15V)
4 12 P120/INTP0/EXLVI ←I/O→ To +12V_MAIN through the resistor and divider (EXLVI config = External potential input for low-voltage detector ?) 0
5 3 P37 POW_LED O→ Connected to dual led(Green) on Switch board through the dual digital NPN trans. EMH1(SOT-563) 0
6 3 P36 STBY_LED O→ Connected to dual led(Red) on Switch board through the dual digital NPN trans. EMH1(SOT-563) 3v @ standby (3.3V)
7 3 P35 ←I/O→ Connected to pinAA18@SB CXD9963GB 0
8 3 P34 ←I/O→ Connected to pinAA17@SB CXD9963GB 0
9 3 P33 ←I/O→ CELL BE related? 0
10 3 P32 ←I/O→ 0
11 16 P163/TI13/TO13 BACK_LEDS O→ Connected to Backlit LEDs on Switch board 0
12 16 P162/TI12/TO12 CONTOUR_LEDS O→ Connected to CONTOUR LEDs on Switch board 0
13 16 P161/TI11/TO11 NOT_CONNECTED - Disconnected to GND through a missing SMD component. See: NOWHERE 0
14 16 P160/TI10/TO10 NOT_CONNECTED - Disconnected to GND through a missing SMD component at the other side of the board. See: VIA 0
15 4 P47/INTP2 ←I/O→ Unknown purpose. The trace goes in the direction of the Wifi/BT module 0
16 4 P46/INTP1/TI05/TO05 BUZZER O→ Connected to the base of a transistor that drives a pin of the buzzer to GND 0
17 4 P45/SO01 ←I/O→ SB_SPI_DO @CXD9963GB ? 0
18 4 P44/SI01 ←I/O→ SB_SPI_DI @CXD9963GB ? 3v @ standby
19 4 P43/SCK01 ←I/O→ SB_SPI_CLK @CXD9963GB ? 0
20 4 P42/TI04/TO04 ←I/O→ SB_SPI_CS @CXD9963GB ? 0
21 4 P41/TOOL1 TOOL_CLK O→ Tool clock. Connected to Pin 13 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 3.0
22 4 P40/TOOL0 TOOL_DAT ←I/O→ Tool Data. Connected to Pin 7 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 0
23 12 P127/SO21 ←I/O→ 0
24 12 P126/SI21/SDA21 THR_I2C_SDA ←I/O→ SMBus data. Connected to pin 7 of CELL/RSX temperature monitors TMP411A/B 3v @ standby (3.15)
25 12 P125/SCK21/SCL21 THR_I2C_SCL O→ SMBus clock. Connected to pin 8 of CELL/RSX temperature monitors TMP411A/B 3v @ standby (3.15)
26 RESET RESET ←I Connected to Pin 9 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode. And to standby voltage regulator 463A, pin 3
27 12 P124/XT2 XT_SUB ←I Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?)
28 12 P123/XT1 XT_SUB ←I Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?)
29 FLMD0 FLASH_MODE - Flash programming mode. Connected to pin 8 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 3.33
30 12 P122/X2/EXCLK XT_MAIN ←I Main system clock. Connected to a tiny metallic crystal marked "EX" 0.8v @ standby (1.1)
31 12 P121/X1 XT_MAIN ←I Main system clock. Connected to a tiny metallic crystal marked "EX" 2.2v @ standby (2.4)
32 REGC VREG_CAP - Capacitor for the internal voltage regulator. Connected to ground through a capacitor (around 1uF) at the other side of the board. See: VIA. And 2 diodes to battery+
33 VSS0 GND - 0
34 EVSS0 GND - 0
35 VDD 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
36 EVDD0 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
37 6 P60/SCL0 ←I/O→ Primary I2C bus. UNK_I2C_SCL ? (either HDMI, DVE, or MK) 0.2v @ standby
38 6 P61/SDA0 ←I/O→ Primary I2C bus. UNK_I2C_SDA ? (either HDMI, DVE, or MK) 0.2v @ standby
39 6 P62 ←I/O→ 0
40 6 P63 P63_DOWN ←I 10K resistor to GND 0
41 3 P31/TI03/TO03/INTP4 ACIN_DET ←I Connected to pin 4 of the PSU control connector. See: CECH-25xx/SW2/SwitchBoard/PSU schematic 3v @ standby (3.3)
42 6 P64/RD ←I/O→ Connected (indirectly) to voltage regulator BD9684 0906, pin 4 (enable something) 0
43 6 P65/WR0 ←I/O→ Connected to Pin 12 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 3.0
44 6 P66/WR1 ←I/O→ 0
45 6 P67/ASTB NOT_CONNECTED - 0
46 7 P77/EX23/KR7/INTP11 ←I/O→ 0
47 7 P76/EX22/KR6/INTP10 ←I/O→ 3v @ standby (3.15)
48 7 P75/EX21/KR5/INTP9 ←I/O→ 3v @ standby (3.15)
49 7 P74/EX20/KR4/INTP8 INTP8_DOWN ←I 10K resistor to GND 0
50 7 P73/EX19/KR3 ←I/O→ Connected to pin 3 @ Service Connector 3rd Gen.. And to voltage regulator D35653 0S25 (FLASH_ENABLE ?) 0
51 7 P72/EX18/KR2 ←I/O→ 0
52 7 P71/EX17/KR1 ←I/O→ Connected to voltage regulator BD3525, pin 12 (enable something) 0
53 7 P70/EX16/KR0 ←I/O→ 0
54 0 P06/WAIT P06_DOWN ←I/O→ 45K resistor array to GND 0
55 0 P05/CLKOUT P05_DOWN ←I/O→ 45K resistor array to GND 0
56 EVSS1 GND - 0
57 EVDD1 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
58 8 P80/EX0 ←I/O→ 0
59 8 P81/EX1 ←I/O→ 0
60 8 P82/EX2 ←I/O→ 0
61 8 P83/EX3 ←I/O→ 0
62 8 P84/EX4 ←I/O→ 0
63 8 P85/EX5 ←I/O→ 0
64 8 P86/EX6 ←I/O→ 0
65 8 P87/EX7 ←I/O→ 0
66 3 P30/INTP3/RTC1HZ ←I/O→ 0
67 5 P50/EX8 ←I/O→ 0
68 5 P51/EX9 ←I/O→ 0
69 5 P52/EX10 ←I/O→ 0
70 5 P53/EX11 ←I/O→ 0
71 5 P54/EX12 ←I/O→ 0
72 5 P55/EX13 ←I/O→ 0
73 5 P56/EX14 ←I/O→ 0
74 5 P57/EX15 ←I/O→ 0
75 1 P17/EX31/TI02/TO02 ←I/O→ Connected to voltage regulator Mitsumi 040 810X, pin 5 0
76 1 P16/EX30/TI01/TO01/INTP5 ←I/O→ 3v @ standby (3.15)
77 1 P15/EX29/RTCDIV/RTCCL ←I/O→ 3v @ standby (3.3)
78 1 P14/EX28/RxD3 SC_RxD ←I SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode, and to pin 6 @ PCI Connector 0
79 1 P13/EX27/TxD3 SC_TxD O→ SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode, and to pin 4 @ PCI Connector 3.3
80 1 P12/EX26/SO00/TxD0 BE_SPI_DO O→ SO from Cell Slave to Syscon Master 0
81 1 P11/EX25/SI00/RxD0 BE_SPI_DI ←I SI from Syscon Master to Cell Slave 1.2
82 1 P10/EX24/SCK00 BE_SPI_CLK ? ←I/O→ Serial Clock 0
83 9 P90/EX32 BE_SPI_CS ? ←I/O→ Chip Select 2.0
84 9 P91/EX33 ←I/O→ 3v @ standby
85 9 P92/EX34 ←I/O→ 0
86 9 P93/EX35 ←I/O→ 0
87 9 P94 ←I/O→ RSX_SPI_CS ? See: Template:RSX pad layout 41x41 and pad AW8@ 0
88 9 P95/SCK11/SCL11 ←I/O→ RSX_SPI_CLK ? See: Template:RSX pad layout 41x41 and pad AY8@ 0
89 9 P96/SI11/SDA11 ←I/O→ RSX_SPI_DI ? See: Template:RSX pad layout 41x41 and pad BA7@ 0
90 9 P97/SO11 ←I/O→ RSX_SPI_DO ? See: Template:RSX pad layout 41x41 and pad BA6@ 0
91 11 P112 ←I/O→ 0
92 11 P113 ←I/O→ Connected to voltage regulator BD3527 (near FLASH), pin 12 0
93 11 P114 ←I/O→ 0
94 11 P115 ←I/O→ 0
95 11 P116 ←I/O→ Connected to voltage regulator BD3527 (near USB), pin 12 0
96 11 P117 ←I/O→ 0
97 AVREF1 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
98 11 P110/ANO0 NOT_CONNECTED - 0
99 11 P111/ANO1 NOT_CONNECTED - 0
100 AVREF0 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
101 AVSS0 GND - 0
102 15 P157/ANI15 ANI15_DOWN ←I 100k resistor to GND. And to a missing SMD component to VIA to pin 8 of voltage regulator 463A (3.3_EVER_A) 0
103 15 P156/ANI14 ANI14_UP ←I VIA to 100k resistor to pin 8 of voltage regulator 463A (3.3_EVER_A) 0
104 15 P155/ANI13 ANI13_DOWN ←I VIA to 100k resistor to GND 0
105 15 P154/ANI12 NOT_CONNECTED - 0
106 15 P153/ANI11 NOT_CONNECTED - 0
107 15 P152/ANI10 NOT_CONNECTED - 0
108 15 P151/ANI9 NOT_CONNECTED - 0
109 15 P150/ANI8 ANI8_UP_UNK ←I Connected to an unknown track. And to 10k resistor to VIA to pin 8 of voltage regulator 463A (3.3_EVER_A) 3v @ standby
110 2 P27/ANI7 POW_SW_DET ←I Power switch detect. Connected to Switch board 3v @ standby (3.3) 3.3
111 2 P26/ANI6 EJECT_SW_DET ←I Eject switch detect. Connected to Switch board 3v @ standby (3.3) 3.3
112 2 P25/ANI5 ←I/O→ Connected to Wifi/BT module, unknown pad 0
113 2 P24/ANI4 ←I/O→ Connected to Wifi/BT module, unknown pad 0
114 2 P23/ANI3 ←I/O→ 0
115 2 P22/ANI2 ←I/O→ 0
116 2 P21/ANI1 ←I/O→ 0
117 2 P20/ANI0 ←I/O→ (0V?)
118 13 P130 ACDC_STBY O→ Connected to pin 3 of the PSU control connector. See: CECH-25xx/SW2/SwitchBoard/PSU schematic 3v @ standby (3.3)
119 13 P131/TI06/TO06 ←I/O→ Connected to voltage regulator 348A, pins 2 and 7 (EN_HDMI & EN_AV together ?... in other words, enable video output) 3v @ standby (3.3)
120 0 P07 ←I/O→ 0
121 0 P04/SCK10/SCL10 ←I/O→ 0
122 0 P03/SI10/RxD1/SDA10 ←I/O→ 0
123 0 P02/SO10/TxD1 ←I/O→ 0
124 0 P01/TO00 ←I/O→ Connected to pin93 @Panasonic MN8647091 0
125 0 P00/TI00 ←I/O→ 0
126 14 P145/TI07/TO07 FAN_PWM O→ PWM Control for the Fan. 0
127 14 P144/SO20/TxD2 ←I/O→ (HDMI controller CEC data channel related with pins 1 and 128 ?) 0
128 14 P143/SI20/RxD2/SDA20 ←I/O→ Connected to pin29 @Panasonic MN8647091 (HDMI controller CEC data channel related with pins 1 and 127 ?) 0
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:Syscon_pinout_LQFP_128_pins&oldid=59897"