GL3520: Difference between revisions

From PS4 Developer wiki
Jump to navigation Jump to search
(Created page with "== Genesys Logic GL3520 == USB 3.0 MTT Hub Controller http://www.genesyslogic.com/en/product_view.php?show=26 http://www.arrivalelectronics.co.uk/uploads/GL3520-21+Datasheet...")
 
(remove 2 links)
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== Genesys Logic GL3520 ==
== Genesys Logic GL3520 ==
<div style="float:right">[[File:Genesys Logic GL3520 - Block Diagram.png|200px|thumb|left|Genesys Logic [[GL3520]] Block Diagram]]</div>
USB 3.0 MTT Hub Controller
USB 3.0 MTT Hub Controller


http://www.genesyslogic.com/en/product_view.php?show=26
Product page : http://www.genesyslogic.com/en/product_view.php?show=26
 
Datasheet :
* http://www.arrivalelectronics.co.uk/uploads/GL3520-21+Datasheet_101.pdf
* http://u.jimdo.com/www102/o/sa2984366ace24167/download/m223efb67d8a85ed6/1322800153/GL3520+Datasheet_132.pdf
 
GL3520 Firmware ISP Tool + User Guide :
* ...
 
 
=== Pinout ===
<div style="float:right">[[File:Genesys Logic GL3520 - QFN-88 pinout.png|200px|thumb|left|Genesys Logic [[GL3520]] QFN-88 pinout]]<br />[[File:CUH-10xxA - SAA-001 - GL3520.jpg|200px|thumb|left|[[CUH-10xxA]] [[SAA-001]] [[GL3520]]]]</div>
{| class="wikitable sortable"
|-
! Pin !! Name !! Type !! Description
|-
| 1 || PAMBER4 || B <small>(pd)<small> || Amber LED indicator for DSPORT4
|-
| 2 || PWREN4J || B || Active low. Power enable output for DSPORT4
|-
| 3 || RTERM || A || A 680ohm resister must be connected between RTERM and Ground
|-
| 4 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | - || style="color:white; background-color:darkgrey;" | No Connection
|-
| 5 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | - || style="color:white; background-color:darkgrey;" | No Connection
|-
| 6 || X1 || I || 25MHz Crystal / OSC clock input
|-
| 7 || X2 || O || 25MHz Crystal / OSC clock output.
|-
| 8 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | - || style="color:white; background-color:darkgrey;" | No Connection
|-
| 9 || TXN_UP || O || USB 3.0 Differential Data Transmitter TX- of USPORT
|-
| 10 || TXP_UP || O || USB 3.0 Differential Data Transmitter TX+ of USPORT
|-
| 11 || GND || P || Digital/Analog ground
|-
| 12 || RXN_UP || I || USB 3.0 Differential Data Receiver RX-+ of USPORT
|-
| 13 || RXP_UP || I || USB 3.0 Differential Data Receiver RX+ of USPORT
|-
| 14 || VP12 || P || Analog 1.2V power input for Analog circuit
|-
| 15 || VP12 || P || Analog 1.2V power input for Analog circuit
|-
| 16 || TXN_DS1 || O || USB 3.0 Differential Data Transmitter TX- of DSPORT1
|-
| 17 || TXP_DS1 || O || USB 3.0 Differential Data Transmitter TX-/TX+ of DSPORT1
|-
| 18 || GND || P || Digital/Analog ground
|-
| 19 || RXN_DS1 || I || USB 3.0 Differential Data Receiver RX- of DSPORT1
|-
| 20 || RXP_DS1 || I || USB 3.0 Differential Data Receiver RX+ of DSPORT1
|-
| 21 || VP12 || P || Analog 1.2V power input for Analog circuit
|-
| 22 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | - || style="color:white; background-color:darkgrey;" | No Connection
|-
| 23 || VP12 || P || Analog 1.2V power input for Analog circuit
|-
| 24 || TXN_DS2 || O || USB 3.0 Differential Data Transmitter TX- of DSPORT2
|-
| 25 || TXP_DS2 || O || USB 3.0 Differential Data Transmitter TX+ of DSPORT2
|-
| 26 || GND || P || Digital/Analog ground
|-
| 27 || RXN_DS2 || I || USB 3.0 Differential Data Receiver RX- of DSPORT2
|-
| 28 || RXP_DS2 || I || USB 3.0 Differential Data Receiver RX+ of DSPORT2
|-
| 29 || VP12 || P || Analog 1.2V power input for Analog circuit
|-
| 30 || VP12 || P || Analog 1.2V power input for Analog circuit
|-
| 31 || TXN_DS3 || O || USB 3.0 Differential Data Transmitter TX- of DSPORT3
|-
| 32 || TXP_DS3 || O || USB 3.0 Differential Data Transmitter TX+ of DSPORT3
|-
| 33 || GND || P || Digital/Analog ground
|-
| 34 || RXN_DS3 || I || USB 3.0 Differential Data Receiver RX- of DSPORT3
|-
| 35 || RXP_DS3 || I || USB 3.0 Differential Data Receiver RX+ of DSPORT3
|-
| 36 || VP12 || P || Analog 1.2V power input for Analog circuit
|-
| 37 || VP12 || P || Analog 1.2V power input for Analog circuit
|-
| 38 || TXN_DS4 || O || USB 3.0 Differential Data Transmitter TX- of DSPORT4
|-
| 39 || TXP_DS4 || O || USB 3.0 Differential Data Transmitter TX+ of DSPORT4
|-
| 40 || GND || P || Digital/Analog ground
|-
| 41 || RXN_DS4 || I || USB 3.0 Differential Data Receiver RX- of DSPORT4
|-
| 42 || RXP_DS4 || I || USB 3.0 Differential Data Receiver RX+ of DSPORT4
|-
| 43 || VP12 || P || Analog 1.2V power input for Analog circuit
|-
| 44 || DVDD12 || P || 1.2V digital power input for digital circuits
|-
| 45 || OVCUR2J || I <small>(pu)<small> || Active low. Over current indicator for DSPORT2
|-
| 46 || PWREN2J || B || Active low. Power enable output for DSPORT2
|-
| 47 || PWREN3J || B || Active low. Power enable output for DSPORT3
|-
| 48 || PGREEN3 || B <small>(pd)<small> || Green LED indicator for DSPORT3
|-
| 49 || DVDD12 || P || 1.2V digital power input for digital circuits
|-
| 50 || P_SPI_CK || B || For SPI data clock
|-
| 51 || P_SPI_CZ || B || For SPI data chip enable
|-
| 52 || PAMBER1 || B <small>(pd)<small> || Amber LED indicator for DSPORT1
|-
| 53 || PWREN1J || B || Active low. Power enable output for DSPORT1<br />PWREN1# is the only power-enable output for GANG mode
|-
| 54 || OVCUR4J || I <small>(pu)<small> || Active low. Over current indicator for DSPORT1
|-
| 55 || VBUS || I || VBUS valid input
|-
| 56 || PAMBER3 || B <small>(pd)<small> || Amber LED indicator for DSPORT3
|-
| 57 || DVDD12 || P || 1.2V digital power input for digital circuits
|-
| 58 || DVDD || P || 3.3V digital power input for digital circuits
|-
| 59 || DM0 || B || USB 2.0 DM for USPORT
|-
| 60 || DP0 || B || USB 2.0 DP for USPORT
|-
| 61 || DM1 || B || USB 2.0 DM for DSPORT1
|-
| 62 || DP1 || B || USB 2.0 DP for DSPORT1
|-
| 63 || AVDD || P || Analog 3.3V power input
|-
| 64 || DM2 || B || USB 2.0 DM for DSPORT2
|-
| 65 || DP2 || B || USB 2.0 DP for DSPORT2
|-
| 66 || AVDD1 || P || Analog 3.3V power input
|-
| 67 || GND || P || Digital/Analog ground
|-
| 68 || DM3 || B || USB 2.0 DM for DSPORT3
|-
| 69 || DP3 || B || USB 2.0 DP for DSPORT3
|-
| 70 || AVDD || P || Analog 3.3V power input
|-
| 71 || DM4 || B || USB 2.0 DM for DSPORT4
|-
| 72 || DP4 || B || USB 2.0 DP for DSPORT4
|-
| 73 || DVDD || P || 3.3V digital power input for digital circuits
|-
| 74 || PGANG || I || Default put in input mode after power-on reset.<br />Individual/gang mode is strapped during this period.
|-
| 75 || DVDD12 || P || 1.2V digital power input for digital circuits
|-
| 76 || TEST || B <small>(pd)<small> || TEST: 0: Normal operation.<br />1: Chip will be put in test mode.
|-
| 77 || OVCUR3J || I <small>(pu)<small> || Active low. Over current indicator for DSPORT3
|-
| 78 || OVCUR1J || I <small>(pu)<small> || Active low. Over current indicator for DSPORT1<br />OVCUR1# is the only over current flag for GANG mode
|-
| 79 || PGREEN1 || B <small>(pd)<small> || Green LED indicator for DSPORT1
|-
| 80 || P_SPI_DO || B || For SPI data Input
|-
| 81 || P_SPI_DI || B || For SPI data Output
|-
| 82 || PSELF || I || 0: GL3520 is bus-powered.<br />1: GL3520 is self-powered.
|-
| 83 || RESETJ || I <small>(pd)<small> || Active low. External reset input, default pull high 10KΩ.<br />When RESET# = low, whole chip is reset to the initial state
|-
| 84 || PGREEN2 || B <small>(pd)<small> || Green LED indicator for DSPORT2
|-
| 85 || V33 || P || 5V-to-3.3V regulator Vout & 3.3 input
|-
| 86 || V5 || P || 5V Power input. It need be NC if using external regulator
|-
| 87 || PAMBER2 || B <small>(pd)<small> || Amber LED indicator for DSPORT2
|-
| 88 || PGREEN4 || B <small>(pd)<small> || Green LED indicator for DSPORT4
|-
|}
Type:
* O    Output
* I    Input
* B    Bi-directional
* P    Power / Ground
* A    Analog
* pu  Internal pull up
* pd  Internal pull down
 


http://www.arrivalelectronics.co.uk/uploads/GL3520-21+Datasheet_101.pdf


http://u.jimdo.com/www102/o/sa2984366ace24167/download/m223efb67d8a85ed6/1322800153/GL3520+Datasheet_132.pdf


{{Motherboard Components}}
{{Motherboard Components}}
<noinclude>[[Category:Main]]</noinclude>
<noinclude>[[Category:Main]]</noinclude>

Latest revision as of 16:32, 7 July 2016

Genesys Logic GL3520[edit | edit source]

Genesys Logic GL3520 Block Diagram

USB 3.0 MTT Hub Controller

Product page : http://www.genesyslogic.com/en/product_view.php?show=26

Datasheet :

GL3520 Firmware ISP Tool + User Guide :

  • ...


Pinout[edit | edit source]

Genesys Logic GL3520 QFN-88 pinout

Pin Name Type Description
1 PAMBER4 B (pd) Amber LED indicator for DSPORT4
2 PWREN4J B Active low. Power enable output for DSPORT4
3 RTERM A A 680ohm resister must be connected between RTERM and Ground
4 NC - No Connection
5 NC - No Connection
6 X1 I 25MHz Crystal / OSC clock input
7 X2 O 25MHz Crystal / OSC clock output.
8 NC - No Connection
9 TXN_UP O USB 3.0 Differential Data Transmitter TX- of USPORT
10 TXP_UP O USB 3.0 Differential Data Transmitter TX+ of USPORT
11 GND P Digital/Analog ground
12 RXN_UP I USB 3.0 Differential Data Receiver RX-+ of USPORT
13 RXP_UP I USB 3.0 Differential Data Receiver RX+ of USPORT
14 VP12 P Analog 1.2V power input for Analog circuit
15 VP12 P Analog 1.2V power input for Analog circuit
16 TXN_DS1 O USB 3.0 Differential Data Transmitter TX- of DSPORT1
17 TXP_DS1 O USB 3.0 Differential Data Transmitter TX-/TX+ of DSPORT1
18 GND P Digital/Analog ground
19 RXN_DS1 I USB 3.0 Differential Data Receiver RX- of DSPORT1
20 RXP_DS1 I USB 3.0 Differential Data Receiver RX+ of DSPORT1
21 VP12 P Analog 1.2V power input for Analog circuit
22 NC - No Connection
23 VP12 P Analog 1.2V power input for Analog circuit
24 TXN_DS2 O USB 3.0 Differential Data Transmitter TX- of DSPORT2
25 TXP_DS2 O USB 3.0 Differential Data Transmitter TX+ of DSPORT2
26 GND P Digital/Analog ground
27 RXN_DS2 I USB 3.0 Differential Data Receiver RX- of DSPORT2
28 RXP_DS2 I USB 3.0 Differential Data Receiver RX+ of DSPORT2
29 VP12 P Analog 1.2V power input for Analog circuit
30 VP12 P Analog 1.2V power input for Analog circuit
31 TXN_DS3 O USB 3.0 Differential Data Transmitter TX- of DSPORT3
32 TXP_DS3 O USB 3.0 Differential Data Transmitter TX+ of DSPORT3
33 GND P Digital/Analog ground
34 RXN_DS3 I USB 3.0 Differential Data Receiver RX- of DSPORT3
35 RXP_DS3 I USB 3.0 Differential Data Receiver RX+ of DSPORT3
36 VP12 P Analog 1.2V power input for Analog circuit
37 VP12 P Analog 1.2V power input for Analog circuit
38 TXN_DS4 O USB 3.0 Differential Data Transmitter TX- of DSPORT4
39 TXP_DS4 O USB 3.0 Differential Data Transmitter TX+ of DSPORT4
40 GND P Digital/Analog ground
41 RXN_DS4 I USB 3.0 Differential Data Receiver RX- of DSPORT4
42 RXP_DS4 I USB 3.0 Differential Data Receiver RX+ of DSPORT4
43 VP12 P Analog 1.2V power input for Analog circuit
44 DVDD12 P 1.2V digital power input for digital circuits
45 OVCUR2J I (pu) Active low. Over current indicator for DSPORT2
46 PWREN2J B Active low. Power enable output for DSPORT2
47 PWREN3J B Active low. Power enable output for DSPORT3
48 PGREEN3 B (pd) Green LED indicator for DSPORT3
49 DVDD12 P 1.2V digital power input for digital circuits
50 P_SPI_CK B For SPI data clock
51 P_SPI_CZ B For SPI data chip enable
52 PAMBER1 B (pd) Amber LED indicator for DSPORT1
53 PWREN1J B Active low. Power enable output for DSPORT1
PWREN1# is the only power-enable output for GANG mode
54 OVCUR4J I (pu) Active low. Over current indicator for DSPORT1
55 VBUS I VBUS valid input
56 PAMBER3 B (pd) Amber LED indicator for DSPORT3
57 DVDD12 P 1.2V digital power input for digital circuits
58 DVDD P 3.3V digital power input for digital circuits
59 DM0 B USB 2.0 DM for USPORT
60 DP0 B USB 2.0 DP for USPORT
61 DM1 B USB 2.0 DM for DSPORT1
62 DP1 B USB 2.0 DP for DSPORT1
63 AVDD P Analog 3.3V power input
64 DM2 B USB 2.0 DM for DSPORT2
65 DP2 B USB 2.0 DP for DSPORT2
66 AVDD1 P Analog 3.3V power input
67 GND P Digital/Analog ground
68 DM3 B USB 2.0 DM for DSPORT3
69 DP3 B USB 2.0 DP for DSPORT3
70 AVDD P Analog 3.3V power input
71 DM4 B USB 2.0 DM for DSPORT4
72 DP4 B USB 2.0 DP for DSPORT4
73 DVDD P 3.3V digital power input for digital circuits
74 PGANG I Default put in input mode after power-on reset.
Individual/gang mode is strapped during this period.
75 DVDD12 P 1.2V digital power input for digital circuits
76 TEST B (pd) TEST: 0: Normal operation.
1: Chip will be put in test mode.
77 OVCUR3J I (pu) Active low. Over current indicator for DSPORT3
78 OVCUR1J I (pu) Active low. Over current indicator for DSPORT1
OVCUR1# is the only over current flag for GANG mode
79 PGREEN1 B (pd) Green LED indicator for DSPORT1
80 P_SPI_DO B For SPI data Input
81 P_SPI_DI B For SPI data Output
82 PSELF I 0: GL3520 is bus-powered.
1: GL3520 is self-powered.
83 RESETJ I (pd) Active low. External reset input, default pull high 10KΩ.
When RESET# = low, whole chip is reset to the initial state
84 PGREEN2 B (pd) Green LED indicator for DSPORT2
85 V33 P 5V-to-3.3V regulator Vout & 3.3 input
86 V5 P 5V Power input. It need be NC if using external regulator
87 PAMBER2 B (pd) Amber LED indicator for DSPORT2
88 PGREEN4 B (pd) Green LED indicator for DSPORT4

Type:

  • O Output
  • I Input
  • B Bi-directional
  • P Power / Ground
  • A Analog
  • pu Internal pull up
  • pd Internal pull down