From Vita Developer wiki
Jump to navigation Jump to search

Power Settings Settings.png[edit | edit source]

Standby Mode[edit | edit source]

To reduce battery consumption, your system will go into the standby mode when it is idle for a certain period of time. Select Settings.png > [Power Save Settings] > [Auto Standby], and then set the time.

Depending on the state of some applications, such as when a slideshow or a video is playing, 
the system may not automatically go into the standby mode.

Wi-Fi in Power Save Mode[edit | edit source]

Your system uses a power save mode to reduce battery consumption when connecting using Wi-Fi. To connect using Wi-Fi with the power save mode disabled, select the checkbox to remove the checkmark.

In some environments, the Wi-Fi connection with the access point might become unstable. 
In this case, disabling this function might improve the connection.

USB Power Supply[edit | edit source]

You can set whether or not to supply power to your system when it is connected to a USB device such as a computer using a USB cable.

If you select this checkbox to remove the checkmark, you cannot supply power to your system 
when it is connected to a USB device.

Battery Charging & Duration In battery.png[edit | edit source]

  • Charging using the AC adaptor willl take approximately 2 hours, 40 minutes (for both models).
  • Battery Duration

Add USB connector to PCH-1x00[edit | edit source]

Power Management IC[edit | edit source]

Model Board ID
PCH1101 ZOE_MP Qualcomm PM8028
--- --- ---