Pinout: Difference between revisions
Jump to navigation
Jump to search
(Added locations of UART and some undocumented pins, as deduced by PCB layers photos and "File:Vita-1000-uart.png" from Henkaku Wiki, available under CC-BY 3.0. Sources: [1] https://wiki.henkaku.xyz/vita/File:Vita-1000-uart.png) |
m (Fixed an incorrect pin mapping.) |
||
(One intermediate revision by the same user not shown) | |||
Line 34: | Line 34: | ||
| 14 || GND | | 14 || GND | ||
|- | |- | ||
| 15 || | | 15 || Unknown, connected to MB44C026A IC | ||
|- | |- | ||
| 16 || GND | | 16 || GND |
Revision as of 16:34, 23 August 2018
Multi-use port
Pin | Signal |
---|---|
1 | Another voltage input? |
2 | Another voltage input? |
3 | GND |
4 | Audio output |
5 | Audio output |
6 | UART RX (CPU/Syscon) |
7 | UART TX (CPU/Syscon) |
8 | UART CTS (CPU/Syscon) |
9 | UART RTS (CPU/Syscon) |
10 | ? |
11 | headset control GND |
12 | headset control data / mic |
13 | Unknown, connected to Wolfson Micro WM1803E DAC |
14 | GND |
15 | Unknown, connected to MB44C026A IC |
16 | GND |
17 | +5V charge input |
18 | +5V charge input |
19 | GND |
20 | USB D- |
21 | USB D+ |
Accessory Port
Pin | Signal |
---|---|
1 | VCC |
2 | D- |
3 | D+ |
4 | N/C (floating?) |
5 | GND |
EHCI
The accessory port found only on the original Vita models is a custom port USB interface. The port must be activated in software and so far, there does not seem to be any official public software that uses it. As of firmware 1.69, all APIs that reference the accessory port are permanently disabled.
The only documented usage of this port is from an FCC filing for the PDEL-1001 development unit. It seems that some dongle attached to the device is used as part of their hardware testing framework.
The port appears to be the same as used on the Panasonic K1HA14AD0001.