Editing Downgrading with Hardware flasher

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 76: Line 76:
<li>If powered on correctly your dongle will light up (usually green) and trigger Factory Service Mode. The PSGrade will then power off the console. If it boots into the XMB with a red FSM logo in the corner you are using an old PSGrade.</li>
<li>If powered on correctly your dongle will light up (usually green) and trigger Factory Service Mode. The PSGrade will then power off the console. If it boots into the XMB with a red FSM logo in the corner you are using an old PSGrade.</li>
</ul>
</ul>
<li> Put the Lv2diag.self (see below) and a [[Downgrading with Hardware flasher#PUP_to_use|pre-patched firmware]] to install (named PS3UPDAT.PUP) in root of your USB Mass Storage Device and plug it in the PS3 (in the same port as the PSGrade).</li>
<li> Put the Lv2diag.self (see below) and a [http://www.ps3devwiki.com/index.php?title=Downgrading_with_Hardware_flasher&action=submit#PUP_to_use pre-patched firmware] to install (named PS3UPDAT.PUP) in root of your USB Mass Storage Device and plug it in the PS3 (in the same port as the PSGrade).</li>
<li> Turn PS3 on and it will automatically install the firmware you had put there. You will not have anything on the screen, you can only tell it is installing by the flashing USB and PS3's HDD light</li>
<li> Turn PS3 on and it will automatically install the firmware you had put there. You will not have anything on the screen, you can only tell it is installing by the flashing USB and PS3's HDD light</li>
<li> PS3 will turn itself off after finishing the firmware installation (If it flashes red the firmware did not install correctly).<br />A logfile should be present in root of the USB Mass Storage Device with no errors</li>
<li> PS3 will turn itself off after finishing the firmware installation (If it flashes red the firmware did not install correctly).<br />A logfile should be present in root of the USB Mass Storage Device with no errors</li>
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)