Syscon Thermal Config/structs: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
(Moved to https://www.psdevwiki.com/ps3/Syscon_Thermal_Configs/structs)
Tag: New redirect
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
This page is '''only''' intended to show some code samples, feel free to improve them, please provide a proof if an important change is made, and use the related {{talk}} page/s for the dicussions and speculations
#REDIRECT [[Syscon Thermal Configs/structs]]
 
{{Boxcode|title=ps3_syscon_eeprom_thermal_config_region.c|code=<syntaxhighlight lang="c">
// SYSCON          | THERMAL CONFIG FMT | BOARDS
//---------------------------------------------------------------
// CXR713F120A    | mullion_flash      | MPU-501, TMU-520, COOKIE-XX prototypes
// CXR713120-201GB | mullion_old        | COK-001
// CXR713120-202GB | mullion_old        | COK-002
// CXR713120-203GB | mullion_new        | SEM-001
// CXR714120-301GB | mullion_new        | DIA-001
// CXR714120-302GB | mullion_new        | DIA-002, DEB-001
// CXR714120-303GB | mullion_new        | COK-002 (Refurb 65nm RSX)
// CXR714120-304GB | mullion_new        | COK-001, DIA-001 (Refurbs 40nm RSX)
// SW-301          | sherwood          | VER-001
// SW-302          | sherwood          | VER-001
// SW2-301        | sherwood          | DYN-001
// SW2-302        | sherwood          | SUR-001
// SW2-303        | sherwood          | JTP-001, JSD-001
// SW3-301        | sherwood          | KTE-001
// SW3-302        | sherwood          | MSX-001, MPX-001, NPX-001
// SW3-303        | sherwood          | ?
// SW3-304        | sherwood          | PQX-001, PPX-001, RTX-001, REX-001
 
struct fancon_footer {
u8 duty_min;              // Always 0x33 (PS3 Fats and Slims DYN-001, SUR-001, JTP-001, JSD-001), or always 0x34 (PS3 Slim KTE-001 and SuperSlims)
u8 duty_max;              // Always 0xFF
u8 policy;                // 0x00=Full, 0x01=Auto, 0x02=Manual
u8 select;                // 0x00=EEPROM, 0xFF=RAM
u8 active;                // 0x00=Inactive, 0xFF=Active
};
 
struct fancon_40 {
u8  duty[0xA];
u16 tempu[0xA];
u16 tempd[0xA];
fancon_footer;
u8 reserved[0x9];
}; // 0x40
 
struct fancon_80 {
u8  duty[0x14];
u16 tempu[0x14];
u16 tempd[0x14];
fancon_footer;
u8 reserved[0x17];
}; // 0x80
 
struct fancon_sw {
u8  duty;
u16 tempu;
u16 tempd;
};
 
struct fancon_70 {
fancon_sw[0x14];
fancon_footer;
u8 reserved[0x7];
}; // 0x70
 
 
struct config_footer_temps  {
u16 trp;                  // Thermal Protection ? (usually 1ºC lower than tshutdown)
u16 tshutdown;            // Thermal Shutdown (usually the same temperature than the highest value of TempU)
u16 hyst;                // Hysteresis (usually 2ºC)
};
 
struct config_footer_unk_1  {
u8 unk_1_cell;            // always 0xFF
u8 unk_1_rsx;            // always 0xFF
u8 unk_1_bevr;            // always 0xFF
u8 unk_1_sb;              // always 0xFF
u8 unk_1_eegs;            // always 0xFF
};
 
struct config_footer_unk_2  {
u8 unk_2_cell;            // directly or indirectly related with cell revision
u8 unk_2_rsx;            // directly or indirectly related with rsx revision
u8 unk_2_bevr;            // directly or indirectly related with bevr revision
u8 unk_2_sb;              // directly or indirectly related with sb revision
u8 unk_2_eegs;            // directly or indirectly related with eegs revision
};
 
struct config_footer_unk_3  {
u8 unk_3_cell;            // identical to unk_2_cell (only mullion, sherwood doesnt seems to use this area)
u8 unk_3_rsx;            // identical to unk_2_rsx (only mullion, sherwood doesnt seems to use this area)
u8 unk_3_bevr;            // always 0xFF, bevr fan table is not active (only mullion, sherwood doesnt seems to use this area)
u8 unk_3_sb;              // identical to unk_2_sb (only mullion, sherwood doesnt seems to use this area)
u8 unk_3_eegs;            // always 0xFF, eegs fan table is not active (only mullion, sherwood doesnt seems to use this area)
}; //
 
 
struct config_footer_mullionf {
u8  use_eeprom_values;    // (00 = yes)
u8  reserved;
config_footer_temps cell;
config_footer_temps rsx;
config_footer_temps xdr;
config_footer_temps intake;
config_footer_temps gbe;
config_footer_temps sb;
u8  reserved[0xA];
u16 tshutdown_time;      // TShutdown Time:%d[s](0x%04x)
u8  unknown_0;            // related to thermal errors
u8  fan_shutdown_time;
u8  reserved [0xC];
u8  rsx_thermal_limit_unk0;
u8  rsx_thermal_limit_unk1;
u8  rsx_thermal_limit_unk2;
u8  rsx_thermal_limit_unk3;
u8  rsx_thermal_limit_unk4;
u8  rsx_thermal_limit_unk5;
u8  reserved [0xA];
u8  unknown_1;            // fan config
u8  unknown_2;            // fan config
u8  unknown_3;            // fan config
u8  reserved [0xD];
u8  unknown_4;            // fan config (set to 0xE0)
u16 unknown_5;            // fan config
u16 unknown_6;            // fan config
u16 unknown_7;            // fan config
u16 unknown_8;            // fan config
u16 unknown_9;            // fan config
u8  reserved [0x95];
}; // 0x100
 
struct config_footer_mullion {
u16 tshutdown_time;      // TShutdown Time:%d[s](0x%04x). Always 0xFFFF
u8  unk_00;              // Fan shutdown time ?
u8  fan_initial_duty;    // Fan initial duty: %d%%(0x%02x). Always 0x4D (PS3 Fats with mullion)
u8  fan_initial_time;    // Fan initial time: %d(ms). Always 0x14
config_footer_unk_1;
config_footer_unk_2;
u8  unk_FF;
config_footer_temps cell;
config_footer_temps rsx;
config_footer_temps bevr;
config_footer_temps sb;
config_footer_temps eegs;
config_footer_unk_3;
u8  reserved[0x4B];
u16 checksum;
}; // 0x80
 
struct config_footer_sherwood {
u16 tshutdown_time;      // TShutdown Time:%d[s](0x%04x). Always 0xFFFF
u16 unk_0000;            // Fan shutdown time ?, length increased to 2 bytes for sherwoods ?
u8  fan_initial_duty;    // Fan initial duty: %d%%(0x%02x). 0x4D (PS3 Fat VER-001 and Slim DYN-001), or 0x40 (Slims SUR-001, JTP-001, JSD-001), or 0x41 (Slim KTE-001 and SuperSlims)
u8  fan_initial_time;    // Fan initial time: %d(ms). Always 0x14
config_footer_unk_1;
config_footer_unk_2;
config_footer_temps cell;
config_footer_temps rsx;
config_footer_temps sb;
u8  reserved[0x8E];
}; // 0xB0
 
 
struct thermal_config {
#ifdef mullion_flash
fancon_40 cell;          // FanconNo=0, TZoneNo=0x00 "1st BE Primary"
fancon_40 rsx;            // FanconNo=1, TZoneNo=0x01 "RSX Primary"
fancon_40 unk_z20;        // FanconNo=2, TZoneNo=0x20 unknown
fancon_40 unk_z21;        // FanconNo=3, TZoneNo=0x21 unknown
fancon_40 xdr;            // FanconNo=4, TZoneNo=0x02 "XDR Primary"
fancon_40 intake;        // FanconNo=7, TZoneNo=0x0A "Air Intake"
fancon_40 gbe;            // FanconNo=6, TZoneNo=0x0F "GbE"
fancon_40 sb;            // FanconNo=5, TZoneNo=0x14 "SB"
config_footer_mullionf;
#endif
#ifdef mullion_old
fancon_40 cell;          // FanconNo=0, TZoneNo=0x00 "1st BE Primary"
fancon_40 rsx;            // FanconNo=1, TZoneNo=0x01 "RSX Primary"
fancon_40 bevr;          // FanconNo=?, TZoneNo=0x03 "BE VR"
fancon_40 sb;            // FanconNo=3, TZoneNo=0x14 "SB"
fancon_40 eegs;          // FanconNo=?, TZoneNo=0x15 "EE+GS"
fancon_40 reserved
config_footer_mullion;
#endif
#ifdef mullion_new
fancon_80 cell;          // FanconNo=0, TZoneNo=0x00 "1st BE Primary"
fancon_80 rsx;            // FanconNo=1, TZoneNo=0x01 "RSX Primary"
fancon_80 sb;            // FanconNo=2, TZoneNo=0x14 "SB"
config_footer_mullion;
#endif
#ifdef sherwood
fancon_70 cell;          // FanconNo=0, TZoneNo=0x00 "1st BE Primary"
fancon_70 rsx;            // FanconNo=1, TZoneNo=0x01 "RSX Primary"
fancon_70 sb;            // FanconNo=?, TZoneNo=0x14 "SB"
config_footer_sherwood;
#endif
};
</syntaxhighlight>}}
 
{{Reverse engineering}}<noinclude>[[Category:Main]]</noinclude>

Latest revision as of 15:27, 22 January 2022