Template:Updating Bitstreams 1.2/1.21: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (→Error Codes) |
||
Line 17: | Line 17: | ||
| Error 3 || Cannot reset hardware, power/communications issue | | Error 3 || Cannot reset hardware, power/communications issue | ||
|- | |- | ||
| Error 5 || Hardware | | Error 5 || Hardware timeout | ||
|- | |- | ||
| Error 6 || Wrong model number, see also Error 3 | | Error 6 || Wrong model number, see also Error 3 |
Revision as of 13:42, 24 May 2015
- Install the Infectus driver for Injectus --> connect only the Injectus via usb to PC
- Disconnect the Injectus and connect it via 15 pin cable to the Progskeet 1.2, then connect it to the PC.
Load the Bitstream with the Infectus Programmer. - When it´s done disconnect it from the PC and connect the Slaveboard instead of the Injectus. Then connect it to the PC.
Install the driver manually.
If it´s done, it will look like this:
Error Codes
Error 3 | Cannot reset hardware, power/communications issue |
Error 5 | Hardware timeout |
Error 6 | Wrong model number, see also Error 3 |
Error 8 | Malfunctioning port |
Error 9 | Programmer execution error (failed consistency check), see Error 3 and Error 5 |
Error 10 | Error in programming algorith, please contact techsupport |
Error 11 | There is no data in the buffer, You must load a file or read a chip |
Error 14 | There is no chip in the programmer |
Error 15 | The chip is not inserted in the programmer, check pins |
Error 16 | The chip is inserted backwards |
Error 17 | Out of base memory |
Error 18 | Temporary file error |
Error 21 | Cannot program |
Error 22 | Cannot erase |
Error 23 | Invalid electronic signature in chip (device ID) |
Error 24 | Invalid electronic signature in chip (algorithm ID) |
Error 26 | Device is not blank |
Error 27 | Device is not secured |
Error 31 | Database file is invalid, The EXE file is corrupt |
Error 32 | Sorry, algorithm not found. Please call techsupport |
Error 33 | You must reselect the chip you want to program |
Error 36 | You must properly install the correct socket module |
Error 39 | Device already secured |
Error 44 | Internal error. Please call techsupport |
Error 46 | AFS software required to execute this function |
Error 47 | Self-test failed. This unit may need service |
Error 57 | You must purchase support for this device |
Error 70 | The buffer data cannot be used to program |