User talk:Defyboy
You need to use your twitter more! :P --IntelMiner 02:22, 30 March 2011 (CDT)
I'm not into all this internet social crap. I post things on my blog (http://www.defyboy.org) or announce them in #ps3dev --Admin 02:56, 31 March 2011 (CDT)
Oh, fair enough, I should probably join #ps3dev more often, too --IntelMiner 03:45, 31 March 2011 (CDT)
Defyboy, have you tried talking to Syscon via these points? -COK-001/002: http://goput.it/str/ftq.jpg -SEM-001: http://goput.it/str/txq.jpg
I have had some success with the Syscon UART I have not yet tried the southbridge, The JTAG doesn't respond. ----
Maybe time for some better rechapta or add a simple human question "what color are strawberries?" e.g. ;) Euss
There, simple capcha as obviously ReCapcha isn't working effectively anymore.
Proposal
make a category Storage with in it the pages
- Basic Bluray disc authentication procedure (BD-storage content/structure)
- Files on the PS3 (Dev_flash/harddrive content/structure)
- Flash (Flash content/structure)
then in each page the needed subsections just like done with the firmware pages (but instead of 1.00/1.02 etc the subsections
- firstregion
- Header
- Filetable
- asecure
- eEID
- cISD
- cCSD
- trvk_prg
- trv_pkg
- creserved
- ros
- cvtrm
- second region
- CELL_EXTNOR_AREA
- Bootloader
- cell_ext_os_area
Simular can be done with harddrive, by splitting it into:
- dev_flash1
- System folders (that are also replaced per FW install)
- User folders
- Other files
- dev_flash2
- dev_flash3
- FAT
- Other regions
etc.
Other storage devices: Syscon EEPROM, BD Flash, BT/Wifi Flash, Sixaxis/Dualshock3 Flash etc.
I see no good other way to split the pages to make them smaller and easy navigational Euss