Template:Updating Bitstreams 1.2/1.21
Jump to navigation
Jump to search
- Install the Infectus driver for Injectus --> connect only the Injectus via usb to PC
- Disconnect the Injectus and connect it via 15 pin cable to the Progskeet 1.2, then connect it to the PC.
Load the Bitstream with the Infectus Programmer. - When it´s done disconnect it from the PC and connect the Slaveboard instead of the Injectus. Then connect it to the PC.
Install the driver manually.
If it´s done, it will look like this: