Template talk:Metbootldr
Jump to navigation
Jump to search
Wouldn't it be wise to add the metldr/bl per revision keys (they stay the same per revision) ? I added the ones for the DECR-1000, it's visible in the edit if you want to have a look
It's located at header+0x04 the size itself is 0x0C (12 bytes)
Also for information purposes, the per console key is located at header+0x14 and is static per console, it's also 0x0C in size.
- Mathieulh
- Those should've been done long ago, yes. But because this particular (abstracted) templated table is used by non-devs too, it would be wise imo to relay that info to each loader section, Talk:Flash:bootldr & Talk:Flash:asecure loader. Euss
´
- this seems to be the most likely candidate for the crypto metldr/bootldr uses http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-spec.pdf
Inputs and Outputs GCM has two operations, authenticated encryption and authenticated decryption. The authenticated encryption operation has four inputs, each of which is a bit string: • A secret key K, whose length is appropriate for the underlying block cipher. • An initialization vector IV , that can have any number of bits between 1 and 264. For a fixed value of the key, each IV value must be distinct, but need not have equal lengths. <b>96-bit IV values can be processed more efficiently, so that length is recommended for situations in which efficiency is critical.</b> • A plaintext P, which can have any number of bits between 0 and 239 − 256. • Additional authenticated data (AAD), which is denoted as A. This data is authenticated, but not encrypted, and can have any number of bits between 0 and 264.