Editing Bios
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 14: | Line 14: | ||
| ADDROM2 || Adds support for rom2 (which contains a Chinese font file), only for Chinese consoles (SCPH-50009). || | | ADDROM2 || Adds support for rom2 (which contains a Chinese font file), only for Chinese consoles (SCPH-50009). || | ||
|- | |- | ||
| APPLOAD || | | APPLOAD || || | ||
|- | |- | ||
| ATAD || The DEV9+ATAD(+Flash device) combo driver. First appearing in ROM v1.10. Has no support for the CXD9566R. Despite its similar name, it is very different from the full ATAD module. || | | ATAD || The DEV9+ATAD(+Flash device) combo driver. First appearing in ROM v1.10. Has no support for the CXD9566R. Despite its similar name, it is very different from the full ATAD module. || | ||
Line 30: | Line 30: | ||
| CDVDMAN || The CD/DVD manager. || | | CDVDMAN || The CD/DVD manager. || | ||
|- | |- | ||
| CLEARSPU || | | CLEARSPU || Seems to clear/reset the SPU, but is known to cause crashes under some conditions. Not sure if it's buggy or not. Only used by the OSDSYS of the SCPH-10000 and SCPH-15000, probably retained for backward-compatibility. || | ||
|- | |- | ||
| CMN01 || || | | CMN01 || || | ||
Line 38: | Line 38: | ||
| D2ELOADP || DECI2 ELOADP extension (ERX module support). || | | D2ELOADP || DECI2 ELOADP extension (ERX module support). || | ||
|- | |- | ||
| DAEMON || | | DAEMON || || | ||
|- | |- | ||
| DBCMAN || || | | DBCMAN || || | ||
Line 155: | Line 155: | ||
|- | |- | ||
| FNTEXOSD || || | | FNTEXOSD || || | ||
|- | |- | ||
| FNTIMAGE || Contains fonts for the OSDSYS of the SCPH-18000 and newer. || | | FNTIMAGE || Contains fonts for the OSDSYS of the SCPH-18000 and newer. || | ||
Line 244: | Line 242: | ||
| IOPBTCON2 || Boot configuration file for the IOP, for the first phase of the IOP reset (before UDNL is loaded). || | | IOPBTCON2 || Boot configuration file for the IOP, for the first phase of the IOP reset (before UDNL is loaded). || | ||
|- | |- | ||
| IOPBTCONF || Boot configuration file for the IOP, during the final phase of the IOP reset. If no UDNL module is specified, the IOP will only have a single IOP reset in the reboot process, with the modules listed in IOPBTCONF. | | IOPBTCONF || Boot configuration file for the IOP, during the final phase of the IOP reset. If no UDNL module is specified, the IOP will only have a single IOP reset in the reboot process, with the modules listed in IOPBTCONF. || | ||
|- | |- | ||
| KERNEL || The EE kernel. || | | KERNEL || The EE kernel. || | ||
Line 252: | Line 250: | ||
| KROMG || || | | KROMG || || | ||
|- | |- | ||
| LED || | | LED || || | ||
|- | |- | ||
| LGBB01 || || | | LGBB01 || || | ||
Line 278: | Line 276: | ||
| MCLOCK || The clock module as a compressed EE raw binary. Only used by the old OSDSYS program from ROM v1.00 and v1.01. || | | MCLOCK || The clock module as a compressed EE raw binary. Only used by the old OSDSYS program from ROM v1.00 and v1.01. || | ||
|- | |- | ||
| MCMAN || Memory Card Manager. | | MCMAN || Memory Card Manager. || | ||
|- | |- | ||
| MCMANO || MCMAN ( | | MCMANO || MCMAN (Open?). Present in the System 246 ROM. Has support for the regular PlayStation 2 Memory Cards, while the System 246's MCMAN module only supports the arcade dongle. || | ||
|- | |- | ||
| MCSERV || RPC server for MCMAN. || | | MCSERV || RPC server for MCMAN. || | ||
Line 336: | Line 334: | ||
| OSDCNF || Contains the IOP boot configuration for OSDSYS (mainly listing the X prefixed modules) || | | OSDCNF || Contains the IOP boot configuration for OSDSYS (mainly listing the X prefixed modules) || | ||
|- | |- | ||
| OSDSND || OSD sound library. This is | | OSDSND || OSD sound library. This is actually the tentative sound driver, which is called "librspu2" in the Sony SDK. The funny thing about OSDSND from the SCPH-18000 and newer is that it's newer than the one in the Sony SDK, even at release v3.02. || | ||
|- | |- | ||
| OSDSYS || The browser. || | | OSDSYS || The browser. || | ||
Line 412: | Line 410: | ||
| PS1VERA || || | | PS1VERA || || | ||
|- | |- | ||
| PS2LOGO || Displays the PlayStation 2 logo from the inserted disc. For newer consoles, if the logo cannot be decrypted properly, it will fall back to the browser. Not actually required to boot games, but the Sony OSDSYS boots PS2 games through this program. | | PS2LOGO || Displays the PlayStation 2 logo from the inserted disc. For newer consoles, if the logo cannot be decrypted properly, it will fall back to the browser. Not actually required to boot games, but the Sony OSDSYS boots PS2 games through this program. || | ||
|- | |- | ||
| PSDRDRV || SDRDRV module for DESR systems used in its OSDSYS program. || | | PSDRDRV || SDRDRV module for DESR systems used in its OSDSYS program. || | ||
Line 460: | Line 458: | ||
| ROMGSCRT || First appeared in ROM 1.60. Provides a portable method for manipulating GS screen modes. The SCPH-10000 and SCPH-15000 do not have this. || | | ROMGSCRT || First appeared in ROM 1.60. Provides a portable method for manipulating GS screen modes. The SCPH-10000 and SCPH-15000 do not have this. || | ||
|- | |- | ||
| ROMVER || ROM version. | | ROMVER || ROM version. || | ||
|- | |- | ||
| SBIN || PS1 BIOS kernel memory COFF file. This is loaded into kernel memory at 0x80000500 (-0x90 header), and contain A0/B0/C0 vector handlers, and more. On real PS1 this code is located at 0xBFC10000, and later also copied to 0x80000500 during bios initialization. || | | SBIN || PS1 BIOS kernel memory COFF file. This is loaded into kernel memory at 0x80000500 (-0x90 header), and contain A0/B0/C0 vector handlers, and more. On real PS1 this code is located at 0xBFC10000, and later also copied to 0x80000500 during bios initialization. || | ||
Line 476: | Line 464: | ||
| SDRDRV || Library for allowing the EE to remotely access the SPU2 via libsd. || | | SDRDRV || Library for allowing the EE to remotely access the SPU2 via libsd. || | ||
|- | |- | ||
| SECRMAN || Security Manager. Signing is NOT done with the one in ROM, but with a special version that comes with the utility discs. Debug stations , TOOL, and PS3 units have a different SECRMAN module from retail sets. | | SECRMAN || Security Manager. Signing is NOT done with the one in ROM, but with a special version that comes with the utility discs. Debug stations , TOOL, and PS3 units have a different SECRMAN module from retail sets. || | ||
| | |||
|- | |- | ||
| SIFCMD || SIF command module. Contains the SIF command and SIF RPC functions. || | | SIFCMD || SIF command module. Contains the SIF command and SIF RPC functions. || | ||
Line 518: | Line 504: | ||
| SSDATA || || | | SSDATA || || | ||
|- | |- | ||
| SSND || | | SSND || || | ||
|- | |- | ||
| STDIO || Standard I/O library. || | | STDIO || Standard I/O library. || | ||
Line 536: | Line 522: | ||
| TESTMODE || Test mode program. The EE will boot this module from EELOAD, if the console is put into service mode by the SONY service jig. For expansion bay sets, it is a device that goes into the expansion bay, but connects to the chassis from within it (it does not connect to the expansion connector). || | | TESTMODE || Test mode program. The EE will boot this module from EELOAD, if the console is put into service mode by the SONY service jig. For expansion bay sets, it is a device that goes into the expansion bay, but connects to the chassis from within it (it does not connect to the expansion connector). || | ||
|- | |- | ||
| TESTSPU || Used by the TESTMODE program for testing the SPU | | TESTSPU || Used by the TESTMODE program for testing the SPU. || | ||
|- | |- | ||
| TEXBARRW || || | | TEXBARRW || || | ||
Line 624: | Line 610: | ||
| TEXOWAL0 || || | | TEXOWAL0 || || | ||
|- | |- | ||
| THMON || Simple THread MONitor. Exists only in the late TOOL's ROM | | THMON || Simple THread MONitor. Exists only in the late TOOL's ROM. || | ||
|- | |- | ||
| THPERF || | | THPERF || || | ||
|- | |- | ||
| THREADMAN || IOP thread manager. || | | THREADMAN || IOP thread manager. || | ||
Line 636: | Line 622: | ||
| TIOPIMG || IOPRP 2.8.0x used in DESR TESTMODE. || | | TIOPIMG || IOPRP 2.8.0x used in DESR TESTMODE. || | ||
|- | |- | ||
| TPADMAN || PADMAN used | | TPADMAN || PADMAN used in DESR TESTMODE. || | ||
|- | |- | ||
| TSIO2MAN || SIO2MAN used | | TSIO2MAN || SIO2MAN used in DESR TESTMODE. || | ||
|- | |- | ||
| TXATAPI || ATAPI driver for the (the DVD writer of the) PSX. TXATAPI is used by TESTMODE of the PSX. || | | TXATAPI || ATAPI driver for the (the DVD writer of the) PSX. TXATAPI is used by TESTMODE of the PSX. || | ||
Line 664: | Line 650: | ||
| XFILEIO || FILEIO module used in OSDSYS. || | | XFILEIO || FILEIO module used in OSDSYS. || | ||
|- | |- | ||
| XFLASH || dev9 flash module used in OSDSYS. || | | XFLASH || dev9 flash module used in OSDSYS. || | ||
|- | |- | ||
| XFROMMAN || dev9 flash filesystem module used in OSDSYS. || | | XFROMMAN || dev9 flash filesystem module used in OSDSYS. || | ||
|- | |- | ||
| XLOADFILE || LOADFILE module used in OSDSYS. || | | XLOADFILE || LOADFILE module used in OSDSYS. || |