Editing PSX

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 401: Line 401:
=== Notes ===
=== Notes ===
* Contrary to some information on the internet, the drive does NOT seem to be married to the individual console. It is however likely that you can not replace the older drive type by the newer type or vice versa (needs verification, please contribute), due to different specifications and features, despite identical electrical interfaces (which is just IDE/ATA through a 50 pin flat flex cable).
* Contrary to some information on the internet, the drive does NOT seem to be married to the individual console. It is however likely that you can not replace the older drive type by the newer type or vice versa (needs verification, please contribute), due to different specifications and features, despite identical electrical interfaces (which is just IDE/ATA through a 50 pin flat flex cable).
* Several variants of the Sanyo SF-DB11 pickup exist, with only some of them being compatible with the PSX. Trying to install an incompatible one will (sometimes? always?) burn the flat flex cable and/or blow the 5V drive-power fuse on the motherboard depending on your luck (known compatible variants: bottom sticker number starts with DB11B; known incompatible revisions: bottom sticker number starts with DB11N, 11NX or 11NXL). It didn't seem to damage anything else though; most notably all electronics (after replacing the blown fuse) AND the laser pickup (after being installed into a compatible PC drive that uses this variant) survived.  
* Several revisions of the Sanyo SF-DB11 pickup exist, with only the older ones being compatible with the PSX. Trying to install a newer one will burn the flat flex cable and/or blow the 5V drive-power fuse on the motherboard depending on your luck. It didn't seem to damage anything else though; most notably all electronics (after replacing the blown fuse) AND the laser pickup (after being installed into a compatible PC drive that uses this newer revision) survived.
** These different types are seemingly actually called "SF-DB11B" (the one compatible with the PSX), "SF-DB11NS", "SF-DB11NX" and "SF-DB11NXL" (all three incompatible with PSX). These are best differentiated by the bottom sticker, not by the embossed revision number on the top.
** Known compatible revisions: T02, T05, T06 bottom sticker number starts with DB11
** Known incompatible revisions: T08, T09, T14, bottom sticker number starts with 11NX or 11NXL.
** There's also some revisions that start with "S", e.g. S03. These are likely also NOT compatible.
** These different types are seemingly actually called "SF-DB11B" (the one compatible with the PSX), "SF-DB11NS", "SF-DB11NX" and "SF-DB11NXL" (all three incompatible with PSX). These are best differentiated by the bottom sticker, not by the embossed revision number.
** Symptoms of a blown 5V fuse:  
** Symptoms of a blown 5V fuse:  
*** Drive appears dead (the slot-mechanism however still works and correctly pulls in and ejects discs)
*** Drive appears dead (the slot-mechanism however still works and correctly pulls in and ejects discs)
Please note that all contributions to PS2 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS2 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)

Templates used on this page: