Editing SysCon

== Overview ==
Syscon handles power, power-LEDs, tray loading (in conjunction with MechaCon, which actually controls the tray and the blue LED), front buttons and some [[Thermal|thermal management]].

It only exists on consoles up to the SCPH-390XX series (GH-022 board) (as well as system 246/256). After that, it's functionality was overtaken by the new Dragon-[[MechaCon]].

On B/B'/C/C' [[Chassis types|chassis]] consoles, it's located on a daughter board (GD-011 for B-chassis, GD-012 for B'-chassis, GD-013 for C and C' chassis), together with RTC, EEPROM, clock battery and part of the voltage regulation circuitry.

== Arcade SysCon ==

On Namco system 246/256 the SysCon has some extra functionalities. Being the most important one the arcade watchdog, Wich is basically a 5 minute timer to shutdown the system.

The Mechacon CMD for toggling the state of the eject blue led was reused on these systems as the watchdog reset CMD.

== Hardware ==
Syscon is always a Toshiba TMP87C807U.
It has a Mask-ROM of 8 Kilobytes (8 K x 8 bits) and a RAM of 256 Bytes (256 x 8 bits).
</br>[[File:M02YRsm.jpg|200px]]</br>
''Pictured above is a SysCon with firmware 2C64 on a GH-015 board.''
== Firmware revisions ==
* 1G78 (GH-001, GH-003) (A/A+ chassis)
* 1V33 (GD-011, GD-012) (B/B' chassis)
* 1V86 (?) (Namco System 246/256 in all? variants, probably also System 147/148?)
* 2A69 (GD-013, GH-008, GH-010, GH-012, GH-013, GH-014, GH-016) (AB/C/C'/D/D' chassis)
* 2C64 (GH-015, GH-017, GH-018, GH-019, GH-022) (F/G chassis)