SPEED: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
== Overview == | == Overview == | ||
SPEED provides various interfaces to the PS2, including Ethernet (using an Ethernet transceiver), IDE/ATA and an UART (to which the modem connects in case of the US-only SCPH-10281 Network Adaptor). For fat models, it comes inside the network adaptor. For slim models, it comes on the motherboard for SCPH-700XX consoles, with the IDE pins still exposed on the PCB, making it possible to connect a hard drive (which is, however, not practical in most cases, as it requires a lot of wires and soldering). It is also used in all [[PSX]] models. Starting with SCPH-750XX consoles, SPEED was not used anymore, as its functions of an network controller were integrated into the newly developed PPC405-based [[IOP/Deckard]], with the IDE interface being removed entirely. | SPEED provides various interfaces to the PS2, including Ethernet (using an Ethernet transceiver), IDE/ATA and an UART (to which the modem connects in case of the US-only SCPH-10281 [[Network Adaptor]]). For fat models, it comes inside the network adaptor. For slim models, it comes on the motherboard for SCPH-700XX consoles, with the IDE pins still exposed on the PCB, making it possible to connect a hard drive (which is, however, not practical in most cases, as it requires a lot of wires and soldering). It is also used in all [[PSX]] models. Starting with SCPH-750XX consoles, SPEED was not used anymore, as its functions of an network controller were integrated into the newly developed PPC405-based [[IOP/Deckard]], with the IDE interface being removed entirely. | ||
== Revisions == | == Revisions == | ||
* ... | * ... | ||
* CXD9624GG (used in some Network Adaptor revisions) | * CXD9624GG (used in some [[Network Adaptor]] revisions) | ||
* ... | * ... | ||
* CXD9731GP (used in all PSX revisions and later Network Adaptor revisions) | * CXD9731GP (used in all PSX revisions and later [[Network Adaptor]] revisions) | ||
* CXD9731AGP (used in all K-chassis/SCPH-700XX slim consoles) | * CXD9731AGP (used in all K-chassis/SCPH-700XX slim consoles) | ||
Revision as of 16:59, 12 October 2021
Overview
SPEED provides various interfaces to the PS2, including Ethernet (using an Ethernet transceiver), IDE/ATA and an UART (to which the modem connects in case of the US-only SCPH-10281 Network Adaptor). For fat models, it comes inside the network adaptor. For slim models, it comes on the motherboard for SCPH-700XX consoles, with the IDE pins still exposed on the PCB, making it possible to connect a hard drive (which is, however, not practical in most cases, as it requires a lot of wires and soldering). It is also used in all PSX models. Starting with SCPH-750XX consoles, SPEED was not used anymore, as its functions of an network controller were integrated into the newly developed PPC405-based IOP/Deckard, with the IDE interface being removed entirely.
Revisions
- ...
- CXD9624GG (used in some Network Adaptor revisions)
- ...
- CXD9731GP (used in all PSX revisions and later Network Adaptor revisions)
- CXD9731AGP (used in all K-chassis/SCPH-700XX slim consoles)