Editing RSXFIFOCommands

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
Cross-reference: https://github.com/AlexAltea/nucleus/blob/master/docs/technical/ps3/gpu.md
Crossreference: [http://portal.gitbrew.org/wikibrew/PS3:HvReverseEngineering:RSXFIFOCommands gitbrew.org::RSXFIFOCommands] <br />
=Method fields description=
What is considered as rsx fifo commands is really combination of few fields describing so called "method". Single method description is 32 bit, and contain flags, addresses, and count of parameters.
{|class="wikitable"
|-
! Bits !! View (MSB:LSB) !! Description
|-
| 01:01 ||
0X000000 00000000 00000000 00000000
|| Flag: Non-increment
|-
| 02:02 ||
00X00000 00000000 00000000 00000000
|| Flag: Jump
|-
| 14:14 ||
00000000 000000X0 00000000 00000000
|| Flag: Return
|-
| 30:30 ||
00000000 00000000 00000000 000000X0
|| Flag: Call
|-
| 03:13 ||
000XXXXX XXXXXX00 00000000 00000000
|| Method count, since count is left shifted by 2 you can consider count as byte count & 0x1FFC
|-
| 16:29 ||
00000000 00000000 AAABBBBB BBBBBB00
|| Method register (2 bits right-shifted)
|-
| 03:31 ||
000XXXXX XXXXXXXX XXXXXXXX XXXXXXXX
|| Jump offset
|-
| 00:29 ||
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXX00
|| Call offset (2 bits right-shifted)
|-
|}
Note: It seems to be possible to write continuous registers using single write with multi param count. Eg. gcmInit write 0x00080384 to setup NV4097_SET_DEPTH_BOUNDS_MIN and NV4097_SET_DEPTH_BOUNDS_MAX using one command with two 4 bytes params.
=Method subchannel identifiers=
{|class="wikitable"
|-
! Bits !! View (MSB:LSB) !! Description
|-
| 16:18 ||
00000000 00000000 00000000 00000000
|| NV40_CURIE_PRIMITIVE (NV4097) and NV40_CHANNEL_DMA (NV406E)
|-
| 16:18 ||
00000000 00000000 00100000 00000000
|| NV03_MEMORY_TO_MEMORY_FORMAT (NV0039)
|-
| 16:18 ||
00000000 00000000 01000000 00000000
|| Unused?
|-
| 16:18 ||
00000000 00000000 01100000 00000000
|| NV30_CONTEXT_SURFACES_2D (NV3062)
|-
| 16:18 ||
00000000 00000000 10000000 00000000
|| NV30_CONTEXT_SURFACE_SWIZZLED (NV309E)
|-
| 16:18 ||
00000000 00000000 10100000 00000000
|| NV30_IMAGE_FROM_CPU (NV308A)
|-
| 16:18 ||
00000000 00000000 11000000 00000000
|| NV30_SCALED_IMAGE_FROM_MEMORY (NV3089)
|-
| 16:18 ||
00000000 00000000 11100000 00000000
|| SCE DRIVER These methods are executed by the LV1, not by the RSX.
|-
|}
 
=Method registers=
The method register field consists of two fields: A 3-bit long subchannel identifier and a 11-bit long offset in that channel. At driver user-level, the whole 14-bit field can be considered as nothing but a 2-bit-rightshifted address where data goes in, optionally triggering an event.<br>
 
==NV40_CHANNEL_DMA==
These methods are executed by the PFIFO puller itself, instead of being forwared to an engine.
{|class="wikitable"
|-
! Register (whole 14 bit) !! Name !! Description
|-
|0x0050 || NV406E_SET_REFERENCE            || Modify DMA control's reference register
|-
|0x0060 || NV406E_SET_CONTEXT_DMA_SEMAPHORE || DMA context object
|-
|0x0064 || NV406E_SEMAPHORE_OFFSET          || Offset has to be smaller than 0x1000 and 4-aligned.
|-
|0x0068 || NV406E_SEMAPHORE_ACQUIRE        || Make the PFIFO puller wait until offset contains the parameter.
|-
|0x006C || NV406E_SEMAPHORE_RELEASE        || Write parameter to the specified offset.
|-
|}
 
==NV40_CURIE_PRIMITIVE==
{|class="wikitable"
|-
! Register (whole 14 bit) !! Name !! Description
|-
| 0x0000 || NV4097_SET_OBJECT                        ||
|-
| 0x0100 || NV4097_NO_OPERATION                      ||
|-
| 0x0104 || NV4097_NOTIFY                            ||
|-
| 0x0110 || NV4097_WAIT_FOR_IDLE                    ||
|-
| 0x0140 || NV4097_PM_TRIGGER                        ||
|-
| 0x0180 || NV4097_SET_CONTEXT_DMA_NOTIFIES          ||
|-
| 0x0184 || NV4097_SET_CONTEXT_DMA_A                ||
|-
| 0x0188 || NV4097_SET_CONTEXT_DMA_B                ||
|-
| 0x018C || NV4097_SET_CONTEXT_DMA_COLOR_B          ||
|-
| 0x0190 || NV4097_SET_CONTEXT_DMA_STATE            ||
|-
| 0x0194 || NV4097_SET_CONTEXT_DMA_COLOR_A          ||
|-
| 0x0198 || NV4097_SET_CONTEXT_DMA_ZETA              ||
|-
| 0x019C || NV4097_SET_CONTEXT_DMA_VERTEX_A          ||
|-
| 0x01A0 || NV4097_SET_CONTEXT_DMA_VERTEX_B          ||
|-
| 0x01A4 || NV4097_SET_CONTEXT_DMA_SEMAPHORE        ||
|-
| 0x01A8 || NV4097_SET_CONTEXT_DMA_REPORT            ||
|-
| 0x01AC || NV4097_SET_CONTEXT_DMA_CLIP_ID          ||
|-
| 0x01B0 || NV4097_SET_CONTEXT_DMA_CULL_DATA        ||
|-
| 0x01B4 || NV4097_SET_CONTEXT_DMA_COLOR_C          ||
|-
| 0x01B8 || NV4097_SET_CONTEXT_DMA_COLOR_D          ||
|-
| 0x0200 || NV4097_SET_SURFACE_CLIP_HORIZONTAL      ||
|-
| 0x0204 || NV4097_SET_SURFACE_CLIP_VERTICAL        ||
|-
| 0x0208 || NV4097_SET_SURFACE_FORMAT                ||
|-
| 0x020C || NV4097_SET_SURFACE_PITCH_A              ||
|-
| 0x0210 || NV4097_SET_SURFACE_COLOR_AOFFSET        ||
|-
| 0x0214 || NV4097_SET_SURFACE_ZETA_OFFSET          ||
|-
| 0x0218 || NV4097_SET_SURFACE_COLOR_BOFFSET        ||
|-
| 0x021C || NV4097_SET_SURFACE_PITCH_B              ||
|-
| 0x0220 || NV4097_SET_SURFACE_COLOR_TARGET          ||
|-
| 0x022C || NV4097_SET_SURFACE_PITCH_Z              ||
|-
| 0x0234 || NV4097_INVALIDATE_ZCULL                  ||
|-
| 0x0238 || NV4097_SET_CYLINDRICAL_WRAP              ||
|-
| 0x023C || NV4097_SET_CYLINDRICAL_WRAP1            ||
|-
| 0x0280 || NV4097_SET_SURFACE_PITCH_C              ||
|-
| 0x0284 || NV4097_SET_SURFACE_PITCH_D              ||
|-
| 0x0288 || NV4097_SET_SURFACE_COLOR_COFFSET        ||
|-
| 0x028C || NV4097_SET_SURFACE_COLOR_DOFFSET        ||
|-
| 0x02B8 || NV4097_SET_WINDOW_OFFSET                ||
|-
| 0x02BC || NV4097_SET_WINDOW_CLIP_TYPE              ||
|-
| 0x02C0 || NV4097_SET_WINDOW_CLIP_HORIZONTAL        ||
|-
| 0x02C4 || NV4097_SET_WINDOW_CLIP_VERTICAL          ||
|-
| 0x0300 || NV4097_SET_DITHER_ENABLE                ||
|-
| 0x0304 || NV4097_SET_ALPHA_TEST_ENABLE            ||
|-
| 0x0308 || NV4097_SET_ALPHA_FUNC                    ||
|-
| 0x030C || NV4097_SET_ALPHA_REF                    ||
|-
| 0x0310 || NV4097_SET_BLEND_ENABLE                  ||
|-
| 0x0314 || NV4097_SET_BLEND_FUNC_SFACTOR            ||
|-
| 0x0318 || NV4097_SET_BLEND_FUNC_DFACTOR            ||
|-
| 0x031C || NV4097_SET_BLEND_COLOR                  ||
|-
| 0x0320 || NV4097_SET_BLEND_EQUATION                ||
|-
| 0x0324 || NV4097_SET_COLOR_MASK                    ||
|-
| 0x0328 || NV4097_SET_STENCIL_TEST_ENABLE          ||
|-
| 0x032C || NV4097_SET_STENCIL_MASK                  ||
|-
| 0x0330 || NV4097_SET_STENCIL_FUNC                  ||
|-
| 0x0334 || NV4097_SET_STENCIL_FUNC_REF              ||
|-
| 0x0338 || NV4097_SET_STENCIL_FUNC_MASK            ||
|-
| 0x033C || NV4097_SET_STENCIL_OP_FAIL              ||
|-
| 0x0340 || NV4097_SET_STENCIL_OP_ZFAIL              ||
|-
| 0x0344 || NV4097_SET_STENCIL_OP_ZPASS              ||
|-
| 0x0348 || NV4097_SET_TWO_SIDED_STENCIL_TEST_ENABLE ||
|-
| 0x034C || NV4097_SET_BACK_STENCIL_MASK            ||
|-
| 0x0350 || NV4097_SET_BACK_STENCIL_FUNC            ||
|-
| 0x0354 || NV4097_SET_BACK_STENCIL_FUNC_REF        ||
|-
| 0x0358 || NV4097_SET_BACK_STENCIL_FUNC_MASK        ||
|-
| 0x035C || NV4097_SET_BACK_STENCIL_OP_FAIL          ||
|-
| 0x0360 || NV4097_SET_BACK_STENCIL_OP_ZFAIL        ||
|-
| 0x0364 || NV4097_SET_BACK_STENCIL_OP_ZPASS        ||
|-
| 0x0368 || NV4097_SET_SHADE_MODE                    ||
|-
| 0x036C || NV4097_SET_BLEND_ENABLE_MRT              ||
|-
| 0x0370 || NV4097_SET_COLOR_MASK_MRT                ||
|-
| 0x0374 || NV4097_SET_LOGIC_OP_ENABLE              ||
|-
| 0x0378 || NV4097_SET_LOGIC_OP                      ||
|-
| 0x037C || NV4097_SET_BLEND_COLOR2                  ||
|-
| 0x0380 || NV4097_SET_DEPTH_BOUNDS_TEST_ENABLE      ||
|-
| 0x0384 || NV4097_SET_DEPTH_BOUNDS_MIN              || When writing 2 params, second param will be used to setup NV4097_SET_DEPTH_BOUNDS_MAX
|-
| 0x0388 || NV4097_SET_DEPTH_BOUNDS_MAX              ||
|-
| 0x0394 || NV4097_SET_CLIP_MIN                      ||
|-
| 0x0398 || NV4097_SET_CLIP_MAX                      ||
|-
| 0x03B0 || NV4097_SET_CONTROL0                      ||
|-
| 0x03B8 || NV4097_SET_LINE_WIDTH                    ||
|-
| 0x03BC || NV4097_SET_LINE_SMOOTH_ENABLE            ||
|-
| 0x03C0 || NV4097_SET_ANISO_SPREAD                  ||
|-
| 0x08C0 || NV4097_SET_SCISSOR_HORIZONTAL            ||
|-
| 0x08C4 || NV4097_SET_SCISSOR_VERTICAL              ||
|-
| 0x08CC || NV4097_SET_FOG_MODE                      ||
|-
| 0x08D0 || NV4097_SET_FOG_PARAMS                    ||
|-
| 0x08E4 || NV4097_SET_SHADER_PROGRAM                ||
|-
| 0x0900 || NV4097_SET_VERTEX_TEXTURE_OFFSET        ||
|-
| 0x0904 || NV4097_SET_VERTEX_TEXTURE_FORMAT        ||
|-
| 0x0908 || NV4097_SET_VERTEX_TEXTURE_ADDRESS        ||
|-
| 0x090C || NV4097_SET_VERTEX_TEXTURE_CONTROL0      ||
|-
| 0x0910 || NV4097_SET_VERTEX_TEXTURE_CONTROL3      ||
|-
| 0x0914 || NV4097_SET_VERTEX_TEXTURE_FILTER        ||
|-
| 0x0918 || NV4097_SET_VERTEX_TEXTURE_IMAGE_RECT    ||
|-
| 0x091C || NV4097_SET_VERTEX_TEXTURE_BORDER_COLOR  ||
|-
| 0x0A00 || NV4097_SET_VIEWPORT_HORIZONTAL          ||
|-
| 0x0A04 || NV4097_SET_VIEWPORT_VERTICAL            ||
|-
| 0x0A0C || NV4097_SET_POINT_CENTER_MODE            ||
|-
| 0x0A1C || NV4097_ZCULL_SYNC                        ||
|-
| 0x0A20 || NV4097_SET_VIEWPORT_OFFSET              ||
|-
| 0x0A30 || NV4097_SET_VIEWPORT_SCALE                ||
|-
| 0x0A60 || NV4097_SET_POLY_OFFSET_POINT_ENABLE      ||
|-
| 0x0A64 || NV4097_SET_POLY_OFFSET_LINE_ENABLE      ||
|-
| 0x0A68 || NV4097_SET_POLY_OFFSET_FILL_ENABLE      ||
|-
| 0x0A6C || NV4097_SET_DEPTH_FUNC                    ||
|-
| 0x0A70 || NV4097_SET_DEPTH_MASK                    ||
|-
| 0x0A74 || NV4097_SET_DEPTH_TEST_ENABLE            ||
|-
| 0x0A78 || NV4097_SET_POLYGON_OFFSET_SCALE_FACTOR  ||
|-
| 0x0A7C || NV4097_SET_POLYGON_OFFSET_BIAS          ||
|-
| 0x0A80 || NV4097_SET_VERTEX_DATA_SCALED4S_M        ||
|-
| 0x0B00 || NV4097_SET_TEXTURE_CONTROL2              ||
|-
| 0x0B40 || NV4097_SET_TEX_COORD_CONTROL            ||
|-
| 0x0B80 || NV4097_SET_TRANSFORM_PROGRAM            || Copy 128-bit data to PGRAPH's VPE instruction buffer at the LOAD offset by collecting 32-bit chunks.
|-
| 0x1428 || NV4097_SET_SPECULAR_ENABLE              ||
|-
| 0x142C || NV4097_SET_TWO_SIDE_LIGHT_EN            ||
|-
| 0x1438 || NV4097_CLEAR_ZCULL_SURFACE              ||
|-
| 0x1450 || NV4097_SET_PERFORMANCE_PARAMS            ||
|-
| 0x1454 || NV4097_SET_FLAT_SHADE_OP                ||
|-
| 0x145C || NV4097_SET_EDGE_FLAG                    ||
|-
| 0x1478 || NV4097_SET_USER_CLIP_PLANE_CONTROL      ||
|-
| 0x147C || NV4097_SET_POLYGON_STIPPLE              ||
|-
| 0x1480 || NV4097_SET_POLYGON_STIPPLE_PATTERN      ||
|-
| 0x1500 || NV4097_SET_VERTEX_DATA3F_M              ||
|-
| 0x1680 || NV4097_SET_VERTEX_DATA_ARRAY_OFFSET      ||
|-
| 0x1710 || NV4097_INVALIDATE_VERTEX_CACHE_FILE      ||
|-
| 0x1714 || NV4097_INVALIDATE_VERTEX_FILE            ||
|-
| 0x1718 || NV4097_PIPE_NOP                          ||
|-
| 0x1738 || NV4097_SET_VERTEX_DATA_BASE_OFFSET      ||
|-
| 0x173C || NV4097_SET_VERTEX_DATA_BASE_INDEX        ||
|-
| 0x1740 || NV4097_SET_VERTEX_DATA_ARRAY_FORMAT      ||
|-
| 0x17C8 || NV4097_CLEAR_REPORT_VALUE                ||
|-
| 0x17CC || NV4097_SET_ZPASS_PIXEL_COUNT_ENABLE      ||
|-
| 0x1800 || NV4097_GET_REPORT                        ||
|-
| 0x1804 || NV4097_SET_ZCULL_STATS_ENABLE            ||
|-
| 0x1808 || NV4097_SET_BEGIN_END                    || Locks or unlocks PGRAPH state while submitting vertex/index/inlined data to draw
|-
| 0x180C || NV4097_ARRAY_ELEMENT16                  ||
|-
| 0x1810 || NV4097_ARRAY_ELEMENT32                  ||
|-
| 0x1814 || NV4097_DRAW_ARRAYS                      ||
|-
| 0x1818 || NV4097_INLINE_ARRAY                      ||
|-
| 0x181C || NV4097_SET_INDEX_ARRAY_ADDRESS          ||
|-
| 0x1820 || NV4097_SET_INDEX_ARRAY_DMA              ||
|-
| 0x1824 || NV4097_DRAW_INDEX_ARRAY                  ||
|-
| 0x1828 || NV4097_SET_FRONT_POLYGON_MODE            ||
|-
| 0x182C || NV4097_SET_BACK_POLYGON_MODE            ||
|-
| 0x1830 || NV4097_SET_CULL_FACE                    ||
|-
| 0x1834 || NV4097_SET_FRONT_FACE                    ||
|-
| 0x1838 || NV4097_SET_POLY_SMOOTH_ENABLE            ||
|-
| 0x183C || NV4097_SET_CULL_FACE_ENABLE              ||
|-
| 0x1840 || NV4097_SET_TEXTURE_CONTROL3              ||
|-
| 0x1880 || NV4097_SET_VERTEX_DATA2F_M              ||
|-
| 0x1900 || NV4097_SET_VERTEX_DATA2S_M              ||
|-
| 0x1940 || NV4097_SET_VERTEX_DATA4UB_M              ||
|-
| 0x1980 || NV4097_SET_VERTEX_DATA4S_M              ||
|-
| 0x1A00 || NV4097_SET_TEXTURE_OFFSET                ||
|-
| 0x1A04 || NV4097_SET_TEXTURE_FORMAT                ||
|-
| 0x1A08 || NV4097_SET_TEXTURE_ADDRESS              ||
|-
| 0x1A0C || NV4097_SET_TEXTURE_CONTROL0              ||
|-
| 0x1A10 || NV4097_SET_TEXTURE_CONTROL1              ||
|-
| 0x1A14 || NV4097_SET_TEXTURE_FILTER                ||
|-
| 0x1A18 || NV4097_SET_TEXTURE_IMAGE_RECT            ||
|-
| 0x1A1C || NV4097_SET_TEXTURE_BORDER_COLOR          ||
|-
| 0x1C00 || NV4097_SET_VERTEX_DATA4F_M              ||
|-
| 0x1D00 || NV4097_SET_COLOR_KEY_COLOR              ||
|-
| 0x1D60 || NV4097_SET_SHADER_CONTROL                ||
|-
| 0x1D64 || NV4097_SET_INDEXED_CONSTANT_READ_LIMITS  ||
|-
| 0x1D6C || NV4097_SET_SEMAPHORE_OFFSET              ||
|-
| 0x1D70 || NV4097_BACK_END_WRITE_SEMAPHORE_RELEASE  ||
|-
| 0x1D74 || NV4097_TEXTURE_READ_SEMAPHORE_RELEASE    ||
|-
| 0x1D78 || NV4097_SET_ZMIN_MAX_CONTROL              ||
|-
| 0x1D7C || NV4097_SET_ANTI_ALIASING_CONTROL        ||
|-
| 0x1D80 || NV4097_SET_SURFACE_COMPRESSION          ||
|-
| 0x1D84 || NV4097_SET_ZCULL_EN                      ||
|-
| 0x1D88 || NV4097_SET_SHADER_WINDOW                ||
|-
| 0x1D8C || NV4097_SET_ZSTENCIL_CLEAR_VALUE          ||
|-
| 0x1D90 || NV4097_SET_COLOR_CLEAR_VALUE            ||
|-
| 0x1D94 || NV4097_CLEAR_SURFACE                    ||
|-
| 0x1D98 || NV4097_SET_CLEAR_RECT_HORIZONTAL        ||
|-
| 0x1D9C || NV4097_SET_CLEAR_RECT_VERTICAL          ||
|-
| 0x1DA4 || NV4097_SET_CLIP_ID_TEST_ENABLE          ||
|-
| 0x1DAC || NV4097_SET_RESTART_INDEX_ENABLE          ||
|-
| 0x1DB0 || NV4097_SET_RESTART_INDEX                ||
|-
| 0x1DB4 || NV4097_SET_LINE_STIPPLE                  ||
|-
| 0x1DB8 || NV4097_SET_LINE_STIPPLE_PATTERN          ||
|-
| 0x1E40 || NV4097_SET_VERTEX_DATA1F_M              ||
|-
| 0x1E94 || NV4097_SET_TRANSFORM_EXECUTION_MODE      ||
|-
| 0x1E98 || NV4097_SET_RENDER_ENABLE                ||
|-
| 0x1E9C || NV4097_SET_TRANSFORM_PROGRAM_LOAD        || Set PGRAPH's VPE LOAD register, which specifies the offset where new instructions are copied.
|-
| 0x1EA0 || NV4097_SET_TRANSFORM_PROGRAM_START      || Set PGRAPH's VPE START register.
|-
| 0x1EA4 || NV4097_SET_ZCULL_CONTROL0                ||
|-
| 0x1EA8 || NV4097_SET_ZCULL_CONTROL1                ||
|-
| 0x1EAC || NV4097_SET_SCULL_CONTROL                ||
|-
| 0x1EE0 || NV4097_SET_POINT_SIZE                    ||
|-
| 0x1EE4 || NV4097_SET_POINT_PARAMS_ENABLE          ||
|-
| 0x1EE8 || NV4097_SET_POINT_SPRITE_CONTROL          ||
|-
| 0x1EF8 || NV4097_SET_TRANSFORM_TIMEOUT            ||
|-
| 0x1EFC || NV4097_SET_TRANSFORM_CONSTANT_LOAD      ||
|-
| 0x1F00 || NV4097_SET_TRANSFORM_CONSTANT            ||
|-
| 0x1FC0 || NV4097_SET_FREQUENCY_DIVIDER_OPERATION  ||
|-
| 0x1FC4 || NV4097_SET_ATTRIB_COLOR                  ||
|-
| 0x1FC8 || NV4097_SET_ATTRIB_TEX_COORD              ||
|-
| 0x1FCC || NV4097_SET_ATTRIB_TEX_COORD_EX          ||
|-
| 0x1FD0 || NV4097_SET_ATTRIB_UCLIP0                ||
|-
| 0x1FD4 || NV4097_SET_ATTRIB_UCLIP1                ||
|-
| 0x1FD8 || NV4097_INVALIDATE_L2                    ||
|-
| 0x1FE0 || NV4097_SET_REDUCE_DST_COLOR              ||
|-
| 0x1FE8 || NV4097_SET_NO_PARANOID_TEXTURE_FETCHES  ||
|-
| 0x1FEC || NV4097_SET_SHADER_PACKER                ||
|-
| 0x1FF0 || NV4097_SET_VERTEX_ATTRIB_INPUT_MASK      ||
|-
| 0x1FF4 || NV4097_SET_VERTEX_ATTRIB_OUTPUT_MASK    ||
|-
| 0x1FF8 || NV4097_SET_TRANSFORM_BRANCH_BITS        ||
|}
 
==NV03_MEMORY_TO_MEMORY_FORMAT==
{|class="wikitable"
|-
! Register (whole 14 bit) !! Name !! Description
|-
|0x2000 || NV0039_SET_OBJECT                ||
|-
|0x2180 || NV0039_SET_CONTEXT_DMA_NOTIFIES  ||
|-
|0x2184 || NV0039_SET_CONTEXT_DMA_BUFFER_IN  ||
|-
|0x2188 || NV0039_SET_CONTEXT_DMA_BUFFER_OUT ||
|-
|0x230C || NV0039_OFFSET_IN                  ||
|-
|0x2310 || NV0039_OFFSET_OUT                ||
|-
|0x2314 || NV0039_PITCH_IN                  ||
|-
|0x2318 || NV0039_PITCH_OUT                  ||
|-
|0x231C || NV0039_LINE_LENGTH_IN            ||
|-
|0x2320 || NV0039_LINE_COUNT                ||
|-
|0x2324 || NV0039_FORMAT                    ||
|-
|0x2328 || NV0039_BUFFER_NOTIFY              ||
|-
|}
 
==NV30_CONTEXT_SURFACES_2D (NV3062)==
{|class="wikitable"
|-
! Register (whole 14 bit) !! Name !! Description
|-
|0x6000 || NV3062_SET_OBJECT                  ||
|-
|0x6180 || NV3062_SET_CONTEXT_DMA_NOTIFIES    ||
|-
|0x6184 || NV3062_SET_CONTEXT_DMA_IMAGE_SOURCE ||
|-
|0x6188 || NV3062_SET_CONTEXT_DMA_IMAGE_DESTIN ||
|-
|0x6300 || NV3062_SET_COLOR_FORMAT            ||
|-
|0x6304 || NV3062_SET_PITCH                    ||
|-
|0x6308 || NV3062_SET_OFFSET_SOURCE            ||
|-
|0x630C || NV3062_SET_OFFSET_DESTIN            ||
|-
|}
 
==NV30_CONTEXT_SURFACE_SWIZZLED==
{|class="wikitable"
|-
! Register (whole 14 bit) !! Name !! Description
|-
| 0x8000 || NV309E_SET_OBJECT              ||
|-
| 0x8180 || NV309E_SET_CONTEXT_DMA_NOTIFIES ||
|-
| 0x8184 || NV309E_SET_CONTEXT_DMA_IMAGE    ||
|-
| 0x8300 || NV309E_SET_FORMAT              ||
|-
| 0x8304 || NV309E_SET_OFFSET              ||
|-
|}
 
==NV30_IMAGE_FROM_CPU (NV308A)==
{|class="wikitable"
|-
! Register (whole 14 bit) !! Name !! Description
|-
|0xA000 || NV308A_SET_OBJECT                ||
|-
|0xA180 || NV308A_SET_CONTEXT_DMA_NOTIFIES  ||
|-
|0xA184 || NV308A_SET_CONTEXT_COLOR_KEY      ||
|-
|0xA188 || NV308A_SET_CONTEXT_CLIP_RECTANGLE ||
|-
|0xA18C || NV308A_SET_CONTEXT_PATTERN        ||
|-
|0xA190 || NV308A_SET_CONTEXT_ROP            ||
|-
|0xA194 || NV308A_SET_CONTEXT_BETA1          ||
|-
|0xA198 || NV308A_SET_CONTEXT_BETA4          ||
|-
|0xA19C || NV308A_SET_CONTEXT_SURFACE        ||
|-
|0xA2F8 || NV308A_SET_COLOR_CONVERSION      ||
|-
|0xA2FC || NV308A_SET_OPERATION              ||
|-
|0xA300 || NV308A_SET_COLOR_FORMAT          ||
|-
|0xA304 || NV308A_POINT                      ||
|-
|0xA308 || NV308A_SIZE_OUT                  ||
|-
|0xA30C || NV308A_SIZE_IN                    ||
|-
|0xA400 || NV308A_COLOR                      ||
|-
|}
 
==NV30_SCALED_IMAGE_FROM_MEMORY==
{|class="wikitable"
|-
! Register (whole 14 bit) !! Name !! Description
|-
|0xC000 || NV3089_SET_OBJECT              ||
|-
|0xC180 || NV3089_SET_CONTEXT_DMA_NOTIFIES ||
|-
|0xC184 || NV3089_SET_CONTEXT_DMA_IMAGE    ||
|-
|0xC188 || NV3089_SET_CONTEXT_PATTERN      ||
|-
|0xC18C || NV3089_SET_CONTEXT_ROP          ||
|-
|0xC190 || NV3089_SET_CONTEXT_BETA1        ||
|-
|0xC194 || NV3089_SET_CONTEXT_BETA4        ||
|-
|0xC198 || NV3089_SET_CONTEXT_SURFACE      ||
|-
|0xC2FC || NV3089_SET_COLOR_CONVERSION    ||
|-
|0xC300 || NV3089_SET_COLOR_FORMAT        ||
|-
|0xC304 || NV3089_SET_OPERATION            ||
|-
|0xC308 || NV3089_CLIP_POINT              ||
|-
|0xC30C || NV3089_CLIP_SIZE                ||
|-
|0xC310 || NV3089_IMAGE_OUT_POINT          ||
|-
|0xC314 || NV3089_IMAGE_OUT_SIZE          ||
|-
|0xC318 || NV3089_DS_DX                    ||
|-
|0xC31C || NV3089_DT_DY                    ||
|-
|0xC400 || NV3089_IMAGE_IN_SIZE            ||
|-
|0xC404 || NV3089_IMAGE_IN_FORMAT          ||
|-
|0xC408 || NV3089_IMAGE_IN_OFFSET          ||
|-
|0xC40C || NV3089_IMAGE_IN                ||
|-
|}
==SCE DRIVER==
These methods are executed by the LV1, not by the RSX.
{|class="wikitable"
|-
! Register (whole 14 bit) !! Name !! Description
|-
|0xE000 || SCE_DRIVER_SET_OBJECT ||
|-
|0xE920 || SCE_DRIVER_FLIP      || Head is specified by the 2 possible indices [0xE920:0E924]
|-
|0xE940 || SCE_DRIVER_QUEUE      || Head is specified by the 8 possible indices [0xE940:0E95C]
|-
|0xEB00 || SCE_DRIVER_INTERRUPT  ||
|-
|}


=Commands=
=Commands=
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)

Templates used on this page:

Retrieved from "http://www.psdevwiki.com/ps3/RSXFIFOCommands"