Editing Syscon Thermal Config/structs

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
#REDIRECT [[Syscon Thermal Configs/structs]]
This page is '''only''' intended to show some code samples, feel free to improve them, please provide a proof if an important change is made, and use the related {{talk}} page/s for the dicussions and speculations
 
{{Boxcode|title=ps3_syscon_eeprom_thermal_config_region.c|code=<syntaxhighlight lang="c">
// SYSCON          | THERMAL CONFIG FMT | BOARDS
//---------------------------------------------------------------
// CXR713F120A    | mullion_flash      | MPU-501, TMU-520, COOKIE-XX prototypes
// CXR713120-201GB | mullion_old        | COK-001
// CXR713120-202GB | mullion_old        | COK-002
// CXR713120-203GB | mullion_new        | SEM-001
// CXR714120-301GB | mullion_new        | DIA-001
// CXR714120-302GB | mullion_new        | DIA-002, DEB-001
// CXR714120-303GB | mullion_new        | COK-002 (Refurb 65nm RSX)
// CXR714120-304GB | mullion_new        | COK-001, DIA-001 (Refurbs 40nm RSX)
// SW-301          | sherwood          | VER-001
// SW-302          | sherwood          | VER-001
// SW2-301        | sherwood          | DYN-001
// SW2-302        | sherwood          | SUR-001
// SW2-303        | sherwood          | JTP-001, JSD-001
// SW3-301        | sherwood          | KTE-001
// SW3-302        | sherwood          | MSX-001, MPX-001, NPX-001
// SW3-303        | sherwood          | ?
// SW3-304        | sherwood          | PQX-001, PPX-001, RTX-001, REX-001
 
struct fancon_footer {
u8 duty_min;              // Always 0x33 (PS3 Fats and Slims DYN-001, SUR-001, JTP-001, JSD-001), or always 0x34 (PS3 Slim KTE-001 and SuperSlims)
u8 duty_max;              // Always 0xFF
u8 policy;                // 0x00=Full, 0x01=Auto Table, 0x02=Manual
u8 select;                // 0x00=EEPROM, 0xFF=RAM
u8 active;                // 0x00=Inactive, 0xFF=Active
};
 
struct fancon_40 {
u8  duty[0xA];
u16 tempu[0xA];
u16 tempd[0xA];
fancon_footer;
u8 reserved[0x9];
}; // 0x40
 
struct fancon_80 {
u8  duty[0x14];
u16 tempu[0x14];
u16 tempd[0x14];
fancon_footer;
u8 reserved[0x17];
}; // 0x80
 
struct fancon_sw {
u8  duty;
u16 tempu;
u16 tempd;
};
 
struct fancon_70 {
fancon_sw[0x14];
fancon_footer;
u8 reserved[0x7];
}; // 0x70
 
 
struct config_footer_temps  {
u16 trp;                  // Thermal Protection ? (usually 1ºC lower than tshutdown)
u16 tshutdown;            // Thermal Shutdown (usually the same temperature than the highest value of TempU)
u16 hyst;                // Hysteresis (usually 2ºC)
};
 
struct config_footer_unk_1  {
u8 unk_1_cell;            // always 0xFF
u8 unk_1_rsx;            // always 0xFF
u8 unk_1_bevr;            // always 0xFF
u8 unk_1_sb;              // always 0xFF
u8 unk_1_eegs;            // always 0xFF
};
 
struct config_footer_unk_2  {
u8 unk_2_cell;            // directly or indirectly related with cell revision
u8 unk_2_rsx;            // directly or indirectly related with rsx revision
u8 unk_2_bevr;            // directly or indirectly related with bevr revision
u8 unk_2_sb;              // directly or indirectly related with sb revision
u8 unk_2_eegs;            // directly or indirectly related with eegs revision
};
 
struct config_footer_unk_3  {
u8 unk_3_cell;            // identical to unk_2_cell (only mullion, sherwood doesnt seems to use this area)
u8 unk_3_rsx;            // identical to unk_2_rsx (only mullion, sherwood doesnt seems to use this area)
u8 unk_3_bevr;            // always 0xFF, bevr fan table is not active (only mullion, sherwood doesnt seems to use this area)
u8 unk_3_sb;              // identical to unk_2_sb (only mullion, sherwood doesnt seems to use this area)
u8 unk_3_eegs;            // always 0xFF, eegs fan table is not active (only mullion, sherwood doesnt seems to use this area)
}; //
 
 
struct config_footer_mullionf {
u8  use_eeprom_values;    // (00 = yes)
u8  reserved;
config_footer_temps cell;
config_footer_temps rsx;
config_footer_temps xdr;
config_footer_temps intake;
config_footer_temps gbe;
config_footer_temps sb;
u8  reserved[0xA];
u16 tshutdown_time;      // TShutdown Time:%d[s](0x%04x)
u8  unknown_0;            // related to thermal errors
u8  fan_shutdown_time;
u8  reserved[0xC];
u8  rsx_thermal_limit_unk0;
u8  rsx_thermal_limit_unk1;
u8  rsx_thermal_limit_unk2;
u8  rsx_thermal_limit_unk3;
u8  rsx_thermal_limit_unk4;
u8  rsx_thermal_limit_unk5;
u8  reserved[0xA];
u8  unknown_1;            // fan config
u8  unknown_2;            // fan config
u8  unknown_3;            // fan config
u8  reserved[0xD];
u8  unknown_4;            // fan config (set to 0xE0)
u16 unknown_5;            // fan config
u16 unknown_6;            // fan config
u16 unknown_7;            // fan config
u16 unknown_8;            // fan config
u16 unknown_9;            // fan config
u8  reserved[0x95];
}; // 0x100
 
struct config_footer_mullion {
u16 tshutdown_time;      // TShutdown Time:%d[s](0x%04x). Always 0xFFFF
u8  unk_00;              // Fan shutdown time ?
u8  fan_initial_duty;    // Fan initial duty: %d%%(0x%02x). Always 0x4D (PS3 Fats with mullion)
u8  fan_initial_time;    // Fan initial time: %d(ms). Always 0x14
config_footer_unk_1;
config_footer_unk_2;
u8  unk_FF;
config_footer_temps cell;
config_footer_temps rsx;
config_footer_temps bevr;
config_footer_temps sb;
config_footer_temps eegs;
config_footer_unk_3;
u8  reserved[0x4B];
u16 checksum;
}; // 0x80
 
struct config_footer_sherwood {
u16 tshutdown_time;      // TShutdown Time:%d[s](0x%04x). Always 0xFFFF
u16 unk_0000;            // Fan shutdown time ?, length increased to 2 bytes for sherwoods ?
u8  fan_initial_duty;    // Fan initial duty: %d%%(0x%02x). 0x4D (PS3 Fat VER-001 and Slim DYN-001), or 0x40 (Slims SUR-001, JTP-001, JSD-001), or 0x41 (Slim KTE-001 and SuperSlims)
u8  fan_initial_time;    // Fan initial time: %d(ms). Always 0x14
config_footer_unk_1;
config_footer_unk_2;
config_footer_temps cell;
config_footer_temps rsx;
u8  reserved[0x94];
}; // 0xB0
 
 
struct thermal_config {
#ifdef mullion_flash
fancon_40 cell;          // FanconNo=0, TZoneNo=0x00 "1st BE Primary"
fancon_40 rsx;            // FanconNo=1, TZoneNo=0x01 "RSX Primary"
fancon_40 unk_z20;        // FanconNo=2, TZoneNo=0x20 unknown
fancon_40 unk_z21;        // FanconNo=3, TZoneNo=0x21 unknown
fancon_40 xdr;            // FanconNo=4, TZoneNo=0x02 "XDR Primary"
fancon_40 intake;        // FanconNo=7, TZoneNo=0x0A "Air Intake"
fancon_40 gbe;            // FanconNo=6, TZoneNo=0x0F "GbE"
fancon_40 sb;            // FanconNo=5, TZoneNo=0x14 "SB"
config_footer_mullionf;
#endif
#ifdef mullion_old
fancon_40 cell;          // FanconNo=0, TZoneNo=0x00 "1st BE Primary"
fancon_40 rsx;            // FanconNo=1, TZoneNo=0x01 "RSX Primary"
fancon_40 bevr;          // FanconNo=?, TZoneNo=0x03 "BE VR"
fancon_40 sb;            // FanconNo=3, TZoneNo=0x14 "SB"
fancon_40 eegs;          // FanconNo=?, TZoneNo=0x15 "EE+GS"
fancon_40 reserved;
config_footer_mullion;
#endif
#ifdef mullion_new
fancon_80 cell;          // FanconNo=0, TZoneNo=0x00 "1st BE Primary"
fancon_80 rsx;            // FanconNo=1, TZoneNo=0x01 "RSX Primary"
fancon_80 sb;            // FanconNo=2, TZoneNo=0x14 "SB"
config_footer_mullion;
#endif
#ifdef sherwood
fancon_70 cell;          // FanconNo=0, TZoneNo=0x00 "1st BE Primary"
fancon_70 rsx;            // FanconNo=1, TZoneNo=0x01 "RSX Primary"
fancon_70 reserved;
config_footer_sherwood;
#endif
};
</syntaxhighlight>}}
 
{{Reverse engineering}}<noinclude>[[Category:Main]]</noinclude>
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/ps3/Syscon_Thermal_Config/structs"