Editing Teensy++ 2.0
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 1: | Line 1: | ||
= Teensy 2.0 ++ Information = | |||
* [http://git.dashhacks.com/norway NORway] (not working link, need working mirror) | |||
== | == Hardware Picture == | ||
== Hardware Installations (Case Modifications by CECH Model) == | |||
== | |||
First open the PS3. Follow youtube videos to learn how (Just search). | First open the PS3. Follow youtube videos to learn how (Just search). | ||
Line 370: | Line 14: | ||
2.) Internal Case Modifications. This is the best way to go as you can install the teensy inside of the PS3 for later use. This is the advantage of using a Teensy 2.0++ because it's just small enough to install inside the PS3 with a little case modification. Other flashers are generally too large to do this with the PS3 closed up. You will find there is just no room for it. | 2.) Internal Case Modifications. This is the best way to go as you can install the teensy inside of the PS3 for later use. This is the advantage of using a Teensy 2.0++ because it's just small enough to install inside the PS3 with a little case modification. Other flashers are generally too large to do this with the PS3 closed up. You will find there is just no room for it. | ||
=== DYN-001 === | === DYN-001 === | ||
This model requires the following: | |||
1x Dremel Tool<br> | |||
<br> | 1x Drill<br> | ||
1x Roll of Double Sided Foam Tape<br> | |||
1x 30AWG Kynar Wire or 26 AWG Kynar Wire. (Few have reported 30AWG may be too small and has interference but does work if done well.)<br> | |||
1x Torque 8 Screwdriver<br> | |||
1x Regular Phillips Head Screwdriver<br> | |||
1x Solder (Can be leaded or no-lead)<br> | |||
1x Soldering Iron (Radioshack 15-30 Watt Will Work.)<br> | |||
1x Pair Of Steady Hands (Not Joking. Tremor Fingers will not cut it. You are soldering 40+ points and all must be done very well.)<br> | |||
1x Good Lighting (Either very well lighted room, or a Lamp. You need to be able to check your work.)<br> | |||
1x Magnifying Glass (To check your soldering joints.)<br> | |||
1x Patience. | |||
[[File:IMAG0109.jpg|250px|thumb|left|DYN-001 Placement Area and first dremel]] | |||
[[File:IMAG0106.jpg|250px|thumb|right|DYN-001 Wire direction and second dremel]] | |||
=== JSD-001 === | === JSD-001 === | ||
.. | |||