Editing Template:Syscon pinout LQFP 100 pins

<br style="clear: both;" />
<span style="font-size:175%; font-family:Times New Roman;">Pinout</span>
----
<div style="float:right">[[File:Syscon pinout LQFP 100 pins.png|300px|thumbnail|right|Syscon pinout LQFP 100 pins<br>NEC/Renesas 78K0R/KG3 Optional pin configurations]]<br>[[File:SW3-304 on PQX-001.jpg|300px|thumbnail|right|Syscon [[SW3-304]]<br>[[CECH-42xx]] with [[PQX-001]] motherboard]]</div>

<div style="overflow:auto; <includeonly>height:800px;</includeonly>">

{|class="wikitable sortable" style="width:100%; line-height:120%; font-size:90%"
|+ {{captionlinks|Syscon pinout LQFP 100 pins}}
! rowspan="2" style="width:35px; min-width:35px; padding:0px; background-position:50% 88%" | Pin !! rowspan="2" style="width:35px; min-width:35px; padding:0px; background-position:50% 88%" | Port !! colspan="2" class="unsortable" | Name !! rowspan="2" class="unsortable" style="padding:0px" | Type !! rowspan="2" class="unsortable" | Description !! colspan="2" style="width:50px;" class="unsortable" | Voltages
|-
! class="unsortable" | <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! class="unsortable" | Sony/Custom !! class="unsortable" | <abbr title="Standby">Stby</abbr> !! class="unsortable" | <abbr title="Running">Runn</abbr>
|-
| 1 || 14 || {{cellcolors|#77f|#ff0}} SCL20  || HDMI_I2C_SCL || {{pino}} || Connected to [[HDMI]] controller [[MN8647091]] pin 27 || 0 || 3.3V
|-
| 2 || 14 || P141/PCLBUZ1/INTP7 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad AA17 (SB_RESET ?, or SB_CGRST ?) ||  || 
|-
| 3 || 14 || INTP6 || SB_INT || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad W22 ||  || 3.3V
|-
| 4 || 12 || {{cellcolors|#f93}} EXLVI ||  || {{pini}} || Connected to [[Power Supply]] main +12V rail through a <abbr title="The resistor/s and divider are located very close (but not connected) to the 4-pins BD ribbon cable connector">resistor and divider</abbr>. Related with [[Syscon_Error_Codes|Error Code 3001 ?]] ||  || 1.5V
|-
| 5 || 4 || P47/INTP2 ||  || ? || Connected to [[HDMI]] controller [[MN8647091]] pin 94 ||  || 
|-
| 6 || 4 || {{cellcolors|#246|#fff}} TO05 || BUZZER || {{pino}} || Connected to Buzzer- through a NPN 50V@100mA transistor ||  || 3.3V
|-
| 7 || 4 || P45/SO01 ||  || ? || Connected to bdrom IC pin 11 ([[Bluray Drive]] controller [[CXD5132R-1]] ? <abbr title="R8J32840FP1 in CECH-42xx, or R9J04G011FP1 in CECH-43xx">or...</abbr>) ||  || 3.3V
|-
| 8 || 4 || {{cellcolors|#77f|#ff0}} P44/SI01 || THR_I2C_SDA || {{pinio}} || Connected to [[Thermal#Temperature_Monitors|TMP411A]] pin 7 through a 47ohm resistor (CELL Temperature Monitor, data)<br>Connected to [[Thermal#Temperature_Monitors|TMP411B]] pin 7 through a 47ohm resistor (RSX Temperature Monitor, data)<br>Connected to [[ISL6331]] pin 22 (Unknown Temperature sensor, data). And a testpad || 3.3V || 3.3V
|-
| 9 || 4 || {{cellcolors|#77f|#ff0}} P43/<span style="text-decoration: overline;">SCK01</span> || THR_I2C_SCL || {{pino}} || Connected to [[Thermal#Temperature_Monitors|TMP411A]] pin 8 (CELL Temperature Monitor, clock)<br>Connected to [[Thermal#Temperature_Monitors|TMP411B]] pin 8 (RSX Temperature Monitor, clock)<br>Connected to [[ISL6331]] pin 23 (Unknown Temperature sensor, clock). And a testpad || 3.3V || 3.3V
|-
| 10 || 4 || P42/TI04/TO04 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad AA18 (SB_RESET ?, or SB_CGRST ?)
 ||  || 3.3V
|-
| 11 || 4 || {{cellcolors|#a74}} TOOL1 || TOOL_CLK || {{pino}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 13 (Tool clock) through a missing resistor ||  || 3.3V
|-
| 12 || 4 || {{cellcolors|#a74}} TOOL0 || TOOL_DAT || {{pinio}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 7 (Tool Data) through a missing resistor ||  || 3.3V
|-
| 13 || data-sort-value="17"| || {{cellcolors|#a74}} <span style="text-decoration: overline;">RESET</span> || RST || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 9 through a missing resistor ||  || 3.3V
|-
| 14 || 12 || {{cellcolors|#555|#fff}} XT2 || OSCOUT || {{pino}} || Connected to Crystal 32.768kHz (Subsystem clock) || 1.2V  || 1.2V
|-
| 15 || 12 || {{cellcolors|#555|#fff}} XT1 || OSCIN || {{pini}} || Connected to Crystal 32.768kHz (Subsystem clock) ||  || 0.8V
|-
| 16 || data-sort-value="17"| || {{cellcolors|#a74}} FLMD0 || FLASH_MODE || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 8 (Flash programming mode) through a missing resistor || 3.3V || 3.3V
|- 
| 17 || 12 || {{cellcolors|#555|#fff}} X2 || XTAL || {{pino}} || Connected to Crystal <abbr title="16.9344MHz ?">marked "ED" or "EU"</abbr> (Main system clock) ||  || 
|-
| 18 || 12 || {{cellcolors|#555|#fff}} X1 || EXTAL || {{pini}} || Connected to Crystal <abbr title="16.9344MHz ?">marked "ED" or "EU"</abbr> (Main system clock) ||  || 
|-
| 19 || data-sort-value="18"| || {{cellcolors|#f93}} REGC || VDDbat || {{pin}} || Connected to <abbr title="Button cell, lithium, 20mm diameter, 2.5mm height, 3v 170mAh">CR2025 battery +</abbr> through 2 inverted Schottky 30V@30mA diodes ?<br>1uF capacitor to ground ? ||  || 2.5V
|-
| 20 || data-sort-value="20"| || {{cellcolors|#333|#fff}} V<span style="font-size:60%;">SS</span> || GND || {{pin}} ||  ||  || 
|-
| 21 || data-sort-value="20"| || {{cellcolors|#333|#fff}} EV<span style="font-size:60%;">SS0</span> || GND || {{pin}} ||  ||  || 
|-
| 22 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} V<span style="font-size:60%;">DD</span> || 3.3_EVER_B || {{pin}} || Connected to [[Talk:Regulators|Mitsumi 463A]] pin 2 (standby voltage regulator, secondary output power rail) || 3.3V || 3.3V
|-
| 23 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || {{pin}} || Connected to [[Talk:Regulators|Mitsumi 463A]] pin 2 (standby voltage regulator, secondary output power rail) || 3.3V || 3.3V
|-
| 24 || 6 || P60/SCL0 ||  || ? ||  ||  || 
|-
| 25 || 6 || P61/SDA0 ||  || ? ||  ||  || 
|-
! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="0.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="1.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="2.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="3.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="4.5"| || style="padding:0px" colspan="6" |
|-
| 26 || 6 || P62 ||  || ? || Connected to <abbr title="64 pins">ISL IC</abbr> pin 3 ||  || 2.5V
|-
| 27 || 6 || P63 ||  || ? || Connected to [[switch boards|Switch board]] dual led (Red) through a dual digital NPN transistor EMH1(SOT-563) ? (STBY_LED ?) || 3.3V || 
|-
| 28 || 3 || P31/TI03/TO03/INTP4 || ACIN_DET ? || ? || pin 4 to wifi5v vreg ic/EN ?
 ||  || 
|-
| 29 || 6 || P64 ||  || ? || Connected (indirectly) to a voltage regulator ? (to enable something ?) ||  || 3.3V
|-
| 30 || 6 || P65 ||  || ? || Connected to IDT4227 pin 1
 ||  || 3.3V
|-
| 31 || 6 || {{cellcolors|#77f|#ff0}} P66 || MK_I2C_SCL ? || ? || Connected to Texas Instruments-SCEI Clock Generator [[CDC750]] pin 33
 ||  || 3.3V
|-
| 32 || 6 || {{cellcolors|#77f|#ff0}} P67 || MK_I2C_SDA ? || ? || Connected to Texas Instruments-SCEI Clock Generator [[CDC750]] pin 34
 ||  || 3.3V
|-
| 33 || 7 || P77/KR7/INTP11 ||  || ? || Connected to voltage regulator [[Talk:Regulators|Rohm BD3527]] pin 12 (enable USB ?)
 ||  || 3.3V
|-
| 34 || 7 || P76/KR6/INTP10 ||  || ? || Connected to [[ISL6331]] <abbr title="40 pins">pin 24</abbr>
 ||  || 3.3V
|-
| 35 || 7 || P75/KR5/INTP9 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad U19 throught 4k7 resistor
 ||  || 3.3V
|-
| 36 || 7 || P74/KR4/INTP8 ||  || ? || Connected to [[ISL6331]] pin 20
 ||  || 3.3V
|-
| 37 || 7 || P73/KR3 ||  || ? || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 3<br>Connected to D35236SK pin 6 <!-- one of them have a typo ? D35236SK or D35326SK ? -->
 ||  || 3.3V
|-
| 38 || 7 || P72/KR2 ||  || ? || Connected to D35326SK pin 7 <!-- one of them have a typo ? D35236SK or D35326SK ? -->
 ||  || 3.3V
|-
| 39 || 7 || {{cellcolors|#3c3|#fff}} P71/KR1 ||  || {{pino}} || Connected to voltage regulator [[Talk:Regulators|Rohm BD3525]] pin 12 (enable something)
 ||  || 3.3V
|-
| 40 || 7 || P70/KR0 ||  || ? || Connected to Texas Instruments [[PS53123]] pin 10
 ||  || 3.3V
|-
| 41 || 0 || P06 ||  || ? || Connected to Texas Instruments [[PS53123]] pin 7
 ||  || 
|-
| 42 || 0 || P05 ||  || ? || Connected to Texas Instruments [[PS53123]] pin 17
 ||  || 3.3V
|-
| 43 || data-sort-value="20"| || {{cellcolors|#333|#fff}} EV<span style="font-size:60%;">SS1</span> || GND || {{pin}} || 
 ||  || 
|-
| 44 || 8 || P80 ||  || ? || 100K pull up to 3v3
 ||  || 
|-
| 45 || 8 || {{cellcolors|#ccc}} P81 ||  || {{pin}} || 0ohm resistor to GND
 || 
|-
| 46 || 8 || P82 ||  || ? || Connected to [[HDMI]] controller [[MN8647091]] pin 95
 ||  || 3.3V
|-
| 47 || 8 || {{cellcolors|#ccc}} P83 ||  || {{pin}} || 0ohm resistor to GND
|| 
|-
| 48 || 8 || P84 ||  || ? || Connected to pin1 EN vreg 8D11 (bottom side of power pcb)
 ||  || 3.3V
|-
| 49 || 8 || P85 ||  || ? || Connected to Texas Instruments [[PS53123]] pin 3
 ||  || 3.3V
|-
| 50 || 8 || P86 ||  || ? || Connected to IDT4227 pin 12
 ||  || 3.3V
|-
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="5.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="6.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="7.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="10.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="11.5"| || style="padding:0px" colspan="6" |
|-
| 51 || 8 || P87 ||  || ? || Connected to power pcb connector
 ||  || 3.3V
|-
| 52 || 3 || P30/INTP3/RTC1HZ ||  || ? || Connected to [[ISL6331]] pin 21
 ||  || 3.3V
|-
| 53 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || {{pin}} || Connected to [[Talk:Regulators|Mitsumi 463A]] pin 2 (standby voltage regulator, secondary output power rail)
 || 3.3V || 3.3V
|-
| 54 || 5 || P50 ||  || ? || Connected to [[ISL6331]] pin 25
 ||  || 3.3V
|-
| 55 || 5 || P51 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad W21. And in line 10k to gnd ||  || 
|-
| 56 || 5 || {{cellcolors|#d9f|#fff}} P52 || WIFI_CTRL || ? || 10k resistor to GND, and to wifi/BT module. See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] || Vary || 3.3V
|-
| 57 || 5 || {{cellcolors|#a74}} P53 || UART0_RxD || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 11 (UART-TTL terminal Receive) through a missing resistor<br>Connected to [[PCI]] [[Media:PCI connector JSD-001 SB and SC UART.jpg|Connector]] pin 6 through a missing resistor ||  || 
|-
| 58 || 5 || {{cellcolors|#a74}} P54 || UART0_TxD || {{pino}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 10 (UART-TTL terminal Transmit) through a missing resistor<br>Connected to [[PCI]] [[Media:PCI connector JSD-001 SB and SC UART.jpg|Connector]] pin 4 through a missing resistor || Vary || 3.3V
|-
| 59 || 5 || P55 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad S19 ||  || 3.3V
|-
| 60 || 5 || P56 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad V22. And in line 47ohms  ||  || 3.3V
|-
| 61 || 5 || P57 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad U18 ||  || 3.3V
|-
| 62 || 1 || {{cellcolors|#33f|#e77}} P17 || RSX_VINTE0<br>VD_VINT0 || {{pini}} || Connected to [[RSX]] pad AR22 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]]) through a 10k resistor ||  || 1.5V
|-
| 63 || 1 || {{cellcolors|#33f|#e77}} P16 || RSX_CGRST || {{pinnc}} || <strike>Connected to [[RSX]] pad AV6 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]])</strike><br>This pin is "nerfed" with a 10k resistor to GND in RSX41x41 pad AV6 so syscon is not able to RESET the RSX CG ||  || 0.8V
|-
| 64 || 1 || {{cellcolors|#33f|#e77}} P15 || RSX_VINTE1<br>VD_VINT1 || {{pini}} || Connected to [[RSX]] pad AL38 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]]) ||  || 1.5V
|-
| 65 || 1 || {{cellcolors|#33f|#e77}} P14 || RSX_RESET || {{pino}} || Connected to [[RSX]] pad AW5 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]]) ||  || 1.5V
|-
| 66 || 1 || {{cellcolors|#33f|#fff}} P13 || RSX_SPI_CS || {{pino}} || Connected to [[RSX]] pad AW8 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]]) ||  || 1.5V
|-
| 67 || 1 || {{cellcolors|#33f|#fff}} SO00 || RSX_SPI_DO || {{pino}} || Connected to [[RSX]] pad AY8 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]]) ||  || 1.5V
|-
| 68 || 1 || {{cellcolors|#33f|#fff}} SI00 || RSX_SPI_DI || {{pini}} || Connected to [[RSX]] pad BA7 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]]) ||  || 
|-
| 69 || 1 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK00</span> || RSX_SPI_CLK || {{pino}} || Connected to [[RSX]] pad BA6 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]]) ||  || 
|-
| 70 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} AV<span style="font-size:60%;">REF1</span> ||  || {{pin}} ||  ||  || 1.5V
|-
| 71 || 11 || P110/ANO0 ||  || ? || Connected to a testpad near SC ||  || 
|-
| 72 || 11 || {{cellcolors|#33f|#e77}} P111/ANO1 || RSX_INT || {{pini}} || Connected to [[RSX]] pad AY7 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]]). Related with [[Syscon_Error_Codes|Error Code 1802]] ||  || 1.5V
|-
| 73 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} AV<span style="font-size:60%;">REF0</span> ||  || {{pin}} ||  ||  || 1.2V
|-
| 74 || data-sort-value="20"| || {{cellcolors|#333|#fff}} AV<span style="font-size:60%;">SS</span> || GND || {{pin}} ||  ||  ||
|-
| 75 || 15 || {{cellcolors|#33f|#e77}} P157 || BE_POWGOOD<br>POWER_GOOD || {{pino}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout)<br>Connected to [[CELL BE|CELL]] [[Service_Connectors#CN1001_.28CELL_BE_JTAG.29|Service Connector CN1001]] pad 9 ||  || 1.2V
|-
! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="12.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="13.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="14.5"| || style="padding:0px" colspan="6" |
|-
! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="15.5"| || style="padding:0px" colspan="6" |
|-
| 76 || 15 || {{cellcolors|#33f|#e77}} P156 || BE_RESET<br>BE_RESET_AND<br>HARD_RESET || {{pino}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout)<br>Connected to [[CELL BE|CELL]] [[Service_Connectors#CN1001_.28CELL_BE_JTAG.29|Service Connector CN1001]] pad 6 and 8 ||  || 1.2V
|-
| 77 || 15  || {{cellcolors|#33f|#fff}} P155 || BE_SPI_DO || {{pino}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout). <abbr title="MOSI">Serial Output from Syscon Master to Cell Slave</abbr> ||  || 
|-
| 78 || 15  || {{cellcolors|#33f|#fff}} P154 || BE_SPI_DI || {{pini}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout). <abbr title="MISO">Serial Input from Cell Slave to Syscon Master</abbr> ||  || 
|-
| 79 || 15  || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">P153</span> || BE_SPI_CLK || {{pino}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout). 2.5 Mhz SPI Clock ||  || 1.2V
|-
| 80 || 15  || {{cellcolors|#33f|#fff}} P152 || BE_SPI_CS || {{pino}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout). Chip Select || Vary || 1.2V
|-
| 81 || 15  || {{cellcolors|#33f|#e77}} P151 || BE_INT<br>ATTENTION || {{pini}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout) through a <abbr title="CELL switches the transistor to connect this syscon pin to GND">NPN 50V@100mA transistor</abbr>. Related with [[Syscon_Error_Codes|Error Code 1701]] ||  || 
|-
| 82 || 15 || {{cellcolors|#33f|#e77}} P150 || SYS_THR_ALRT<br>THERMAL_OVERLOAD || {{pini}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout) through a <abbr title="CELL switches the transistor to connect this syscon pin to GND">NPN 50V@100mA transistor</abbr>. Related with [[Syscon_Error_Codes|Error Code 1200 ?]]<br>Connected to a testpad || Vary || 
|-
| 83 || 2 || P27/ANI7 ||  || ? || Connected to [[switch boards|Switch board]] power switch ? (POW_SW?) || 3.3V || 3.3V
|-
| 84 || 2 || P26/ANI6 ||  || ? || Connected to [[switch boards|Switch board]] eject switch ? (EJECT_SW?). And to a testpad ||  || 
|-
| 85 || 2 || {{cellcolors|#d9f|#fff}} P25/ANI5 ||  || ? || 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module. (BT_WAKEON ? or BT_RESET ?) See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] ||  || 
|-
| 86 || 2 || {{cellcolors|#d9f|#fff}} P24/ANI4 ||  || ? || 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module. (BT_WAKEON ? or BT_RESET ?) See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] ||  || 
|-
| 87 || 2 || P23/ANI3 ||  || ? ||  ||  || 3.3V
|-
| 88 || 2 || P22/ANI2 ||  || ? || Connected to [[Bluray Drive]] [[Media:BD-460_boards_connectors.jpg|8-pins connector]] pin 8 through 100ohm resistor (DISC_CHUCK or DISC_OUT8_SW or DISC_OUT12_SW or <strike>DISC_IN or DISC_PHOT_LED</strike>), and to a testpad ?. See: [[Template:Syscon_pinout_LQFP_128_pins|pin 115]] ||  || 
|-
| 89 || 2 || P21/ANI1 ||  || ? || Connected to [[Bluray Drive]] [[Media:BD-460_boards_connectors.jpg|8-pins connector]] pin 7 through 100ohm resistor (DISC_CHUCK or DISC_OUT8_SW or DISC_OUT12_SW or <strike>DISC_IN or DISC_PHOT_LED</strike>), and to a testpad ?. See: [[Template:Syscon_pinout_LQFP_128_pins|pin 116]] ||  || 3.3V
|-
| 90 || 2 || P20/ANI0 ||  || ? || Connected to [[Bluray Drive]] [[Media:BD-460_boards_connectors.jpg|8-pins connector]] pin 6 through 100ohm resistor (DISC_CHUCK or DISC_OUT8_SW or DISC_OUT12_SW or <strike>DISC_IN or DISC_PHOT_LED</strike>), and to a testpad ?. See: [[Template:Syscon_pinout_LQFP_128_pins|pin 117]] || 3.3V || 3.3V
|-
| 91 || 13 || P130 || ACDC_STBY ? || {{pino}} || Enable PSU 12v power rail ? ||  || 3.3V
|-
| 92 || 13 || P131/TI06/TO06 ||  || ? || Connected to voltage regulator [[Talk:Regulators|Mitsumi 348A]] pins 2 and 7 ?<br>Connected to [[Connectors#HDMI_Out| HDMI connector]] pin 18 (+5V output) through a <abbr title="Labeled ARO1A, located next to the HDMI connector, it have a thick copper trace for a voltage of the HDMI connector)>transistor</abbr> ? ||  || 3.3V
|-
| 93 || 0 || {{cellcolors|#77f|#ff0}} SCL10 || DVE_I2C_SCL || {{pino}} || Connected to [[MultiAV|Digital Video Encoder]] [[CXM4027R]] pin 35 ||  || 3.3V
|-
| 94 || 0 || {{cellcolors|#77f|#ff0}} SDA10 || DVE_I2C_SDA || {{pinio}} || Connected to [[MultiAV|Digital Video Encoder]] [[CXM4027R]] pin 36 ||  || 3.3V
|-
| 95 || 0 || P02/SO10/TxD1 ||  || ? || to pin 12 bdrom port ? (DISC_IN or DISC_PHOT_LED ?) ||  || 3.3V
|-
| 96 || 0 || P01/TO00 ||  || ? || Connected to [[HDMI]] controller [[MN8647091]] pin 93 ??? ||  || 1.5V
|-
| 97 || 0 || P00/TI00 ||  || ? ||  ||  || 
|-
| 98 || 14 || {{cellcolors|#246|#fff}} TO07 || FANPWM0 || {{pino}} || Connected to the [[Cooling|FAN]] grey wire (PWM duty) ||  || 0.8V
|-
| 99 || 14 || P144/SO20/TxD2 ||  || ? || to pin 17 on bdrom port ? (DISC_IN or DISC_PHOT_LED ?) ||  || 3.3V
|-
| 100 || 14 || {{cellcolors|#77f|#ff0}} SDA20 || HDMI_I2C_SDA || {{pinio}} || Connected to [[HDMI]] controller [[MN8647091]] pin 29 || 0 || 
|}</div><noinclude>[[Category:Templates]]</noinclude>