Editing USB

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
[[Category:Hardware]]
<div style="float:right">[[File:CECHC GL852- IC3305.JPG|200px|thumb|left|GL852 USB-Hub as seen on [[CECHCxx]]]]</div>
= USB 2.0 =
= USB 2.0 =
<div style="float:right">[[File:CECHC GL852- IC3305.JPG|200px|thumb|left|[[GL852]] USB-Hub 64-pin as seen on [[CECHCxx]]]]</div>
<div style="float:right">[[File:Usb-pinout.png|200px|thumb|left|USB-pinout]]</div>
 
Depending on the [[SKU Models]] the PS3 is equiped with 6x (Tool/DECR), 4 or 2 [http://en.wikipedia.org/wiki/USB USB (Universal Serial Bus)] 2.0 ports with maximum bandwidth of 480 Mbit/s (~57 MB/s), connected internally to a USB-Hub chip.
Depending on the [[SKU Models]] the PS3 is equiped with 6x (Tool/DECR), 4 or 2 [http://en.wikipedia.org/wiki/USB USB (Universal Serial Bus)] 2.0 ports with maximum bandwidth of 480 Mbit/s (~57 MB/s), connected internally to a USB-Hub chip.


'''Note:''' On PS3 Slim [[CECH-20xx]]/[[DYN-00x|DYN-001]] and later, the USB port datalines are directly connected to [[South Bridge]] without a USB-Hub chip (port is initialised via DC switch IC connected to [[South Bridge]] and TH3301 thermistor protect 5V input).
'''Note:''' On PS3 Slim [[CECH-20xx]]/[[DYN-00x|DYN-001]] and later, the USB ports are directly connected to [[South Bridge]] without a USB-Hub chip.


For more detailed info about the USB hub pinout see: [[GL852]]
<gallery>
File:DYN-001 USB lines (top view).jpg|USB lines top view (common traces for all slim models)
File:DYN-001USB lines (bottom view).jpg|USB lines bottom view (common traces for all slim models)
File:JSD-001 and JTP-001 USB connector TH3301 thermistor and DC switch IC to southbridge v2.jpg|[[JSD-001]]/[[JTP-001]] [[USB]] connector [[Protection|TH3301 thermistor]] and DC switch IC to [[South Bridge]]
</gallery>


== Generic USB Pinout ==
== Generic USB Pinout ==
<div style="float:right">[[File:Usb-pinout.png|200px|thumb|left|USB-pinout]]</div>
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
|+ USB 1.x/2.0 standard pinout
|- bgcolor="#cccccc"
|- bgcolor="#cccccc"
! Pin !! Color !! Signal !! Description
! Pin !! Signal !! Description
|-
| Shell || {{NA}} || Shield || Metal housing
|-
|-
| 1 || style="color:white; background-color:#CC3333;" | Red || V<sub>BUS</sub> || Power / +5 volt DC (max.500mA)
| 1 || VCC || +5 volt DC (max.500mA)
|-
|-
| 2 || style="color:black!important; background-color:white;" | White || D- || rowspan="2" | USB 2.0 differential pair
| 2 || D- || Data-
|-
|-
| 3 || style="color:white; background-color:#33CC33;" | Green || D+
| 3 || D+ || Data+
|-
|-
| 4 || style="color:white; background-color:#333333;" | Black || GND || Ground
| 4 || GND || Ground
|-
|-
|}
|}


{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
== Internal USB-Hub IC's ==
|+ USB 1.x/2.0 mini/micro pinout
<div style="float:right">[[File:Genesys-GL852-MSG-LQFP64.png|200px|thumb|left|64pin LQFP<br />Genesys GL852-MSG02-MT]]<br />[[File:Genesys-GL852-MSG-QFN48.png|200px|thumb|left|48pin QFN<br />Genesys GL852]]</div>
 
=== GL852-MSG02-MT (USB-Hub 64pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
6-806-862-01 / IC3305 <br />
Used in PS3 FAT CECHA/COK-001 and CECHB/COK-001
 
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable sortable" style="border:1px solid #999; border-collapse: collapse;"  
|- bgcolor="#cccccc"
|- bgcolor="#cccccc"
! Pin !! Color !! Signal !! Description
! Pin Name !! 64 Pin# !! 48Pin# !! I/O Type !! Description  
|-
| DM0,DP0 || 3,4 || 3,4 || B || USB signals for USPORT
|-
| DM1,DP1 || 8,9 || 5,6 || B || USB signals for DSPORT1
|-
| DM2,DP2 || 14,15 || 9,10 || B || USB signals for DSPORT2
|-
| DM3,DP3 || 25,26 || 17,18 || B || USB signals for DSPORT3
|-
| DM4,DP4 || 31,32 || 21,22 || B || USB signals for DSPORT4
|-
| RREF || 17 || 11 || B || A 680Ω resister must be connected between RREF and analog ground (AGND).
|-
| OVCUR1#~4 || 56,54,42,40 || 42,40,30,28 || I<br />(pu) || Active low. Over current indicator for DSPORT1~4 OVCUR1# is the only over current flag for GANG mode.
|-
| PWREN1#~4 || 57,55,43,41 || 43,41,31,29 || O || Active low. Power enable output for DSPORT1~4 <br />PWREN1# is the only power-enable output for GANG mode.
|-
|-
| Shell || {{NA}} || Shield || Metal housing
| GREEN1~4 || 60,48,44,34 || 45,35,32,23 || 1,3,4: O<br />2: B<br />(pd) || Green LED indicator for DSPORT1~4<br />*GREEN[1~2] are also used to access the external EEPROM. For detailed information, please refer to Chapter 5.
|-
|-
| 1 || style="color:white; background-color:#CC3333;" | Red || V<sub>BUS</sub> || Power
| AMBER1~4 || 61,49,45,35 || 46,36,33,24 || O<br />(pd) || Amber LED indicator for DSPORT1~4<br />*Amber [1~2] are also used to access the external EEPROM
|-
|-
| 2 || style="color:black!important; background-color:white;" | White || D- || rowspan="2" | USB 2.0 differential pair
| PSELF || 50 || 37 || I || 0: GL852 is bus-powered.<br /> 1: GL852 is self-powered.
|-
|-
| 3 || style="color:white; background-color:#33CC33;" | Green || D+
| PGANG/<br />SUSPND || 53 || 39 || B || This pin is default put in input mode after power-on reset. Individual/gang mode is strapped during this period. After the strapping period, this pin will be set to output mode, and then output high for normal mode. When GL852 is suspended, this pin will output low. *For detailed explanation, please see Chapter 5<br />
Gang      input:1, output: 0@normal, 1@suspend <br />
Individual  input:0, output: 1@normal, 0@suspend
|-
|-
| 4 || {{NA}} || ID || Permits detection of which end of a cable is plugged in:<br/>• "A" connector (host): connected to the signal ground<br>• "B" connector (device): not connected
| X1 || 20 || 14 || I || 12MHz crystal clock input.
|-
|-
| 5 || style="color:white; background-color:#333333;" | Black || GND || Ground
| X2 || 21 || 15 || O || 12MHz crystal clock output.
|-
|-
|}'''Note:''' used on many [[Peripherals]] for charging/sync
| RESET# || 38 || 26 || I || Active low. External reset input, default pull high 10KΩ. When RESET# = low, whole chip is reset to the initial state.
|-
| TEST || 39 || 27 || I<br />(pd) || 0: Normal operation.<br />1: Chip will be put in test mode.
|-
| AVDD || 11,18,22,28,64 || 1,7,12,16,19 || P || 3.3V analog power input for analog circuits.
|-
| AGND || 1,12,19,23,29 || 2,8,13,20 || P || Analog ground input for analog circuits.
|-
| DVDD || 37,47,52,59 || 25,34,38,44,48 || P || 3.3V digital power input for digital circuits
|-
| DGND || 36,46,51,58,62 || 47 || P || Digital ground input for digital circuits.
|-
| NC || 2,5~7,10,13,16,24,27,30,33 || - || - || No connection
|-
|}
<pre> Type
O    Output
I    Input
B    Bi-directional
B/I  Bi-directional, default input
B/O  Bi-directional, default output
P    Power / Ground
A    Analog
SO    Automatic output low when suspend
pu    Internal pull up
pd    Internal pull down
odpu  Open drain with internal pull up</pre>
 
 
=== GL852 (USB-Hub 64pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
Used in PS3 FAT CECHC/COK-002
 
=== GL852 (USB-Hub 48pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
Used in PS3 FAT CECHG/SEM-001
 
=== GL852 (USB-Hub 48pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
[[Wifi#UWB-001]] <br />
Used in PS3 FAT CECHH/DIA-001
 
=== GL852 (USB-Hub 48pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
[[Wifi#UWB-001]] <br />
Used in PS3 FAT CECHJ/DIA-002 and CECHK/DIA-002
 
=== GL852 (USB-Hub 48pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
Used in PS3 FAT CECHL/VER-001 up and including CECHQ/VER-001
 
 
 
{{Console}}


{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>
[[Category:USB]]
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)