WLAN Access Point with PS3 Jupiter: Difference between revisions
Jump to navigation
Jump to search
| Line 28: | Line 28: | ||
<pre> | <pre> | ||
# Load the drivers | |||
insmod ./ps3_jupiter.ko | insmod ./ps3_jupiter.ko | ||
insmod ./ps3_jupiter_ap.ko | insmod ./ps3_jupiter_ap.ko | ||
# Configure channel and SSID | |||
iwconfig wlan1 channel 6 | iwconfig wlan1 channel 6 | ||
Revision as of 16:51, 15 September 2012
Introduction
- WLAN AP driver for PS3 Jupiter (slim only)
Features
- 802.11bg support
- Wireless Extension interface
- WEP, WPA1 and WPA2 support (not yet implemented)
PS3 Jupiter Driver
- Source code: http://gitorious.ps3dev.net/ps3linux/ps3jupiter
Compiling
- You can compile it on PS3 Linux or cross-compile on a Linux PC
git clone http://gitorious.ps3dev.net/ps3linux/ps3jupiter.git cd ps3jupiter make KSRC_DIR=/home/glevand/kernel/linux-3.5.3 ARCH=powerpc CROSS_COMPILE=powerpc64-linux-
Configuration
- For configuration you need wireless-tools: iwconfig and so on.
# Load the drivers insmod ./ps3_jupiter.ko insmod ./ps3_jupiter_ap.ko # Configure channel and SSID iwconfig wlan1 channel 6 iwconfig wlan1 essid wlan_rockz ifconfig wlan1 up # WLAN LED should be green now