WLAN Access Point with PS3 Jupiter: Difference between revisions
Jump to navigation
Jump to search
Line 45: | Line 45: | ||
# Connect to the AP with a PC client and try to ping your AP | # Connect to the AP with a PC client and try to ping your AP | ||
</pre> | </pre> | ||
==Test== | |||
* Tested on my PS3 SLim with Linux kernel 3.5.3 | |||
* No security is supported currently (working on WEP) | |||
=Future Work= | =Future Work= |
Revision as of 16:53, 15 September 2012
Introduction
- WLAN AP driver for PS3 Jupiter (slim only)
Features
- 802.11bg support
- Wireless Extension interface
- WEP, WPA1 and WPA2 support (not yet implemented)
PS3 Jupiter Driver
- Source code: http://gitorious.ps3dev.net/ps3linux/ps3jupiter
Compiling
- You can compile it on PS3 Linux or cross-compile on a Linux PC
git clone git://gitorious.ps3dev.net/ps3linux/ps3jupiter.git cd ps3jupiter make KSRC_DIR=/home/glevand/kernel/linux-3.5.3 ARCH=powerpc CROSS_COMPILE=powerpc64-linux-
Configuration
- For configuration you need wireless-tools: iwconfig and so on.
# Load the drivers insmod ./ps3_jupiter.ko insmod ./ps3_jupiter_ap.ko # Configure channel and SSID iwconfig wlan1 channel 6 iwconfig wlan1 essid wlan_rockz ifconfig wlan1 192.168.201.200 ifconfig wlan1 up # WLAN LED should be green now # Connect to the AP with a PC client and try to ping your AP
Test
- Tested on my PS3 SLim with Linux kernel 3.5.3
- No security is supported currently (working on WEP)