Talk:Teensy++ 2.0: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 20: Line 20:
  <judges> 2v-2.5v works fine
  <judges> 2v-2.5v works fine
  <judges> stops working at 2.8v
  <judges> stops working at 2.8v
<judges> it seems to be kind of variable.. <@eussNL> 1.5Amps at 2.5V is more than enough, right judges ?
<judges> using my version of nandway you'll need [email protected]
<judges> using the original one you'll need [email protected]
<judges> my version drives i/o lines differently
<judges> also original doesnt even work at 2.5V


=== 2.5V 1.5A regulators ===
=== 2.5V 1.5A regulators ===

Revision as of 16:34, 1 April 2013

Teensy talk

NANDway

  • Solder 3.3V regulator on Teensy (and cut 5V pad)
  • Flash the HEX to the Teensy
  • Solder all control + I/O wires + Ground
  • Crash it (it will beep and blink red led), press power button to have a solid red led
  • Make sure to use the right nand id for nandway.py
  • Dump it

Notes

<judges> nand powered with 3.3v by atx doesnt work
<judges> nand powered by teensy requires huge delays to work kind of reliable
<judges> teensy powered by usb, nand powered by external psu with 2v works like a charm..
<judges> thats why nandway worked for me.. it's slow. my own version is almost twice as fast and only worked on my first nand. second one always gave errors..
<judges> powered by teensy seems to be right on the edge of whats still working
<judges> but only with 10ms delays between page reads..
<judges> current power draw is 1.13amps at 2v
<judges> nand control lines are pulled high by starship and teensy isnt able to pull them low
<judges> 2v-2.5v works fine
<judges> stops working at 2.8v
<judges> it seems to be kind of variable.. <@eussNL> 1.5Amps at 2.5V is more than enough, right judges ?
<judges> using my version of nandway you'll need [email protected]
<judges> using the original one you'll need [email protected]
<judges> my version drives i/o lines differently
<judges> also original doesnt even work at 2.5V

2.5V 1.5A regulators