Talk:GbLAN: Difference between revisions
Jump to navigation
Jump to search
Line 9: | Line 9: | ||
! Type !! Size !! Speed !! Voltage !! Packaging !! Manufacturer !! Serial Number !! Description | ! Type !! Size !! Speed !! Voltage !! Packaging !! Manufacturer !! Serial Number !! Description | ||
|- | |- | ||
| - || - || - || - || - || Marvell || 88E6108-LAR1 || Used in earlier models | | - || - || - || - || 144-pin TQFP || Marvell || 88E6108-LAR1 || Used in earlier models | ||
|- | |- | ||
| - || - || - || - || - || Marvell || Alaska 88E111R || Used in Slim models | | - || - || - || - || 64-pin QFN || Marvell || Alaska 88E111R || Used in Slim models | ||
|- | |- | ||
|} | |} | ||
Line 46: | Line 46: | ||
=== Marvell Alaska 88E111R === | === Marvell Alaska 88E111R === | ||
[http://www.marvell.com/products/transceivers/alaska_gigabit_ethernet_transceivers/Alaska_88E1112_r4.pdf | [http://www.marvell.com/products/transceivers/alaska_gigabit_ethernet_transceivers/Alaska_88E1112_r4.pdf Productsheet] | ||
<pre>productcode meaning: | |||
88E111R | |||
Type: Ethernet | |||
Speed : 1Gbps | |||
Package : 144-TQFP | |||
(sorry, no explaination yet)</pre> | |||
== Jumbo frames == | == Jumbo frames == | ||
From Linux perspective (under OtherOS <=3.15), the old drivers set up MTU to 2308, while newer version used MTU 1518. This could be a hypervisor restriction (needs research). | From Linux perspective (under OtherOS <=3.15), the old drivers set up MTU to 2308, while newer version used MTU 1518. This could be a hypervisor restriction (needs research). |
Revision as of 07:16, 7 June 2011
Gigabit LAN
The PS3 has 1 Gigabit Ethernet port. The port accepts Auto-MDIX (automatic medium-dependent interface crossover), so no need for special crosscables when hooking up the PS3 direct to the PC.
Gigabit LAN chips used
A sample of the GbLAN chips in different PS3 models:
Type | Size | Speed | Voltage | Packaging | Manufacturer | Serial Number | Description |
---|---|---|---|---|---|---|---|
- | - | - | - | 144-pin TQFP | Marvell | 88E6108-LAR1 | Used in earlier models |
- | - | - | - | 64-pin QFN | Marvell | Alaska 88E111R | Used in Slim models |
Marvell 88E6108-LAR1 (IC3503)
Datasheet: (not available)
productcode meaning: 88E6108-LAR1 Type: Ethernet Speed : 1Gbps Ports : 8 Package : 144-TQFP (sorry, no explaination yet)
The Marvell 88E6108-LAR1 is sort of a switching hub chip, with several ports that can be used in different configurations:
Port 0 (usuable as MDI 4 dif.pair) : unused (tied to ground) Port 1 (usuable as MDI 4 dif.pair) : unused (tied to ground) Port 2 (usuable as MDI 4 dif.pair) : wired to external UTP connector Port 3 (GMII): Wired to SB Port 4 (usable as TX/RX dif.pair)(100FX): wired to Wifi Port 5 (usable as TX/RX dif.pair): unused (tied to ground) Port 6 (usable as TX/RX dif.pair): unused (tied to ground) Port 7 (usable as TX/RX dif.pair): unused (tied to ground)
Marvell Alaska 88E111R
productcode meaning: 88E111R Type: Ethernet Speed : 1Gbps Package : 144-TQFP (sorry, no explaination yet)
Jumbo frames
From Linux perspective (under OtherOS <=3.15), the old drivers set up MTU to 2308, while newer version used MTU 1518. This could be a hypervisor restriction (needs research).