Difference between revisions of "Disc Identification/Serialization Data"

From PS3 Developer wiki
Jump to: navigation, search
m (wikify)
m (IFPI Code: wikify)
Line 6: Line 6:
 
synonym: SID-Code ('''S'''ource '''ID'''entification Code)
 
synonym: SID-Code ('''S'''ource '''ID'''entification Code)
  
Used for marketing strategy, quality control and Anti-Piracy Compliance Program, there are two kinds of  
+
Used for marketing strategy, quality control and Anti-Piracy Compliance Program, there are two kinds of codes: a Mastering Code and a Mold Code. These 2 codes can be used to trace the location [http://www.psdevwiki.com/ps4/Talk:Bluray_Drive#Pressing_Plant_SID-Codes the location] where discs are made.
  
codes: a Mastering Code and a Mold Code.
 
 
The Mastering Code is created by using the master recorder, so this code will be present on the stamper.
 
 
The Mold Code is etched on the mirror block side of the mold.
 
  
 
{{Boxtip1|content=Each '''Mastering SID Code''' that is assigned will consist of the digits “IFPI” followed by a four or five digit code commencing with the letter “L”.}}
 
{{Boxtip1|content=Each '''Mastering SID Code''' that is assigned will consist of the digits “IFPI” followed by a four or five digit code commencing with the letter “L”.}}

Revision as of 06:58, 19 December 2013

IFPI Code

International Federation of the Phonographic Industry

synonym: SID-Code (Source IDentification Code)

Used for marketing strategy, quality control and Anti-Piracy Compliance Program, there are two kinds of codes: a Mastering Code and a Mold Code. These 2 codes can be used to trace the location the location where discs are made.


Tip
Each Mastering SID Code that is assigned will consist of the digits “IFPI” followed by a four or five digit code commencing with the letter “L”.
Tip
Mould SID Code will consist of the letters “IFPI” followed by a four or five digit code.

The first two digits (in the case of a four digit SID Code) or the first three digits (in the case of a five digit SID Code) are assigned to the operator of the manufacturing or mastering plant. The last two digits of this code are allocated to give each mould on the site.

Using alphanumeric digits consisting of the numbers 0 through 9 and the letters of the Western alphabet A through Z,excluding “I”, “O”, “S” and “Q”, the plant has the ability to assign unique codes to 1,024 different mould code.
  • location: innerring outside datasection
  • length:
  • sample:

Sony DACD prefixes

  • DVSS - Single-layer DVDs
  • DVDL - Dual-layer DVDs
  • BVSS - Single-layer Blu-ray Discs
  • BVDL - Dual-layer Blu-ray Discs
  • DRSS - DVD-ROM software titles
  • PSRM - PlayStation titles
  • PTRM - PlayStation 2 CD-ROM titles
  • PDSS - PlayStation 2 DVD-ROM titles
  • PDDL - PlayStation 2 DVD-ROM Dual-layer titles
  • UPSS - PlayStation Portable UMD Single-layer titles
  • UPDL - PlayStation Portable UMD Dual-layer titles
  • BPSS - PlayStation 3 Blu-ray Disc Single-layer titles
  • BPDL - PlayStation 3 Blu-ray Disc Dual-layer titles

PS4 ?

Patents and references

Cutting Burst Area (CBA)

synonym: Burst Cutting Area (BCA)

Tip
The BCA is used to add unique information, such as the serial number, to the individual disc after completion of the manufacturing process. The BCA–code is recorded in CAV mode. Then BCA-code is written as a series of low-reflectance stripes arranged in circumferential direction.

The zone between radius 21.0 mm and 22.2 mm is reserved to be used as an optional BCA defined by the application.

  • location: innerring inside datasection
  • radius: 22.3 to 23.5mm
  • datasize: 12 bytes to 188 bytes in steps of 16 bytes
  • sample:

Patents and references


PIC Zone

Permanent Information & Control data

  • location: within the Cutting Burst Area (CBA)
  • datasize: 0x73 bytes
  • sample:

Patents and references

Angular Marks

  • location: in the data area, outside the Cutting Burst Area (CBA)
  • sample:

Patents and references

ROM Mark

  • location:
  • length:
  • sample:

Patents and references


Generic References