Loaders

Explaination

Loaders are used for loading other modules.

Commonly found in CoreOS and Flash.

Known loaders

Loader	Location	Type	Remarks
bootldr	Flash	Boot Loader	primairy loader from chain of trust
metldr	Flash	Meta Loader	aka asecure_loader. Loads other loaders
appldr	CoreOS	Application Loader	loads vsh.self (Userspace Module)
isoldr	CoreOS	Isolation Loader	loading isolated SPU modules
lv1ldr	CoreOS	Hypervisor Loader	loads lv1.self (Hypervisor)
lv2ldr	CoreOS	Supervisor Loader	loads lv2_kernel.self (Supervisor kernel)

Stop Codes

Stop Code	Module	Remark
0x30	isoldr/appldr	Version mismatch (isoldr version differs from version returned by SPU channel 73).
0x16	isoldr
0x27	appldr	SPU arg at 0x3E840

0x27

When booting, lv1ldr store its version in this region writing to ch_72. isoldr asks for the version in two chuncks, if you want to pass version 3.41 (0x0003004100000000)

Note: this version check was recently added, maybe in fw 3.41

//for ch_73_round_0
data0 = 0x00030041;
//for ch_73_round_1
data1 = 0x00000000;

lv1ldr

Used for loading the hypervisor (lv1.self)

LS Parameters Layout

Address	Usage	Comments
0x3E000	Wait flag	If (flag==0){wait;} // use 0xFF00000000ULL
0x3E800	Arguments

isoldr

Used for loading isolated SPU modules.

LS Parameters layout

Address	Usage	Comments
0x3E000	Wait flag	If (flag==0){wait;} // use 0xFF00000000ULL
0x3E400	EID0
0x3E800	Arguments
0x3EC00	QA-Token	If not used set to -1
0x3F000	Program revoke list

Arguments

Depending which isolated module you want to load, you would need to pass it different arguments.

Size	Name	spp_verifier
u64	prog_auth_id	0x1050000003000001
u64	lpar_auth_id	0x1070000002000001
u64	*spu_module	SPU - address in ram
u64	*spu_module_arg1	Profile - address in ram
u64	spu_module_arg1_size	sizeof(profile)
u64	*spu_module_arg2	Not used
u64	spu_module_arg2_size	Not used
u8	res1[16]	Unknown
u64	field48	3
u8 res2[16]	Unknown