Template:DSW-001 pinout: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (the resistors info was copyed from HSW-001 pinout table by mistake) |
||
| Line 9: | Line 9: | ||
| 2 || style="color:white; background-color:darkgrey;" | Syscon [[SW2-30x]], pin 12 || 4x CONTOUR LEDs || Not used by default.<br />On Switch board is connected to a transistor driving 3 LEDs TWO BLUE AND ONE RED. | | 2 || style="color:white; background-color:darkgrey;" | Syscon [[SW2-30x]], pin 12 || 4x CONTOUR LEDs || Not used by default.<br />On Switch board is connected to a transistor driving 3 LEDs TWO BLUE AND ONE RED. | ||
|- | |- | ||
| rowspan="2" | 3 || rowspan="2" | Syscon [[SW2-30x]], pin 11 || 2x WHITE LEDs, ground pins || Inner LEDs for EJECT button backlight | | rowspan="2" | 3 || rowspan="2" | Syscon [[SW2-30x]], pin 11 || 2x WHITE LEDs, ground pins || Inner LEDs for EJECT button backlight | ||
|- | |- | ||
| 2x WHITE LEDs, ground pins || Inner LEDs for POWER button backlight | | 2x WHITE LEDs, ground pins || Inner LEDs for POWER button backlight | ||
|- | |- | ||
| 4 || Syscon [[SW2-30x]], pin 110 || POWER switch || Sink to ground to activate. | | 4 || Syscon [[SW2-30x]], pin 110 || POWER switch {{buttonpower}} || Sink to ground to activate. | ||
|- | |- | ||
| 5 || Syscon [[SW2-30x]], pin 111 || EJECT switch || Sink to ground to activate. | | 5 || Syscon [[SW2-30x]], pin 111 || EJECT switch {{buttoneject}} || Sink to ground to activate. | ||
|- | |- | ||
| 6 || Syscon [[SW2-30x]], pin 5 || GREEN led || Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch. | | 6 || Syscon [[SW2-30x]], pin 5 || GREEN led || Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch. | ||
Revision as of 23:10, 19 July 2017
| Pin | Signal/Connected to | Description | |
|---|---|---|---|
| On Motherboard | On Switch board | ||
| 1 | Syscon SW2-30x, pin 13 | Pogo Pin | Only This line have pogo pin @ switchboard, seems that it is a service pin. |
| 2 | Syscon SW2-30x, pin 12 | 4x CONTOUR LEDs | Not used by default. On Switch board is connected to a transistor driving 3 LEDs TWO BLUE AND ONE RED. |
| 3 | Syscon SW2-30x, pin 11 | 2x WHITE LEDs, ground pins | Inner LEDs for EJECT button backlight |
| 2x WHITE LEDs, ground pins | Inner LEDs for POWER button backlight | ||
| 4 | Syscon SW2-30x, pin 110 | POWER switch  |
Sink to ground to activate. |
| 5 | Syscon SW2-30x, pin 111 | EJECT switch  |
Sink to ground to activate. |
| 6 | Syscon SW2-30x, pin 5 | GREEN led | Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch. |
| 7 | Syscon SW2-30x, pin 6 | RED led | Connects to top-left corner pin (red gnd) of dual red/green LED over power switch. |
| 8 | BD_Connector, pin 13 | BLUE led | Connects to blue LED over eject switch. |
| 9 | GND | GND | Ground |
| 10 | CN101 Power Supply, pin1 ? | VCC | +5V DC VCC |
- above top panel view port behind pcb. resistors was not tested.