Template talk:Syscon pinout LQFP 128 pins: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
(→‎Missing lines: the sherwoods with 128 pins are not used with the 28nm RSX models using a 34x34 pad layout)
Line 4: Line 4:


== Missing lines ==
== Missing lines ==
*SB_RESET (syscon output, south bridge input)
*SB_CGRST (syscon output, south bridge input)
*RSX_RESET (syscon output, RSX input) <--------- Connected to [[RSX]] pad AW5 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]) ?
*RSX_CGRST (syscon output, RSX input) <--------- Connected to [[RSX]] pad AV6 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]) ?
*RSX_VINTE1 / VD_VINT1 (syscon input, RSX output) <--------- Connected to [[RSX]] pad AL38 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]). Exists in [[Template:Syscon_pinout_LQFP_100_pins]]
*DISC_PHOT_LED (syscon output, bluray input) <--- disc insertion IR (emitter)
*DISC_IN (syscon input, bluray output) <--- disc insertion phototransistor (receiver)
*RSX_FBVDD_SEL (syscon output, RSX input) <----- existence doubtful
*SW_HDD (syscon output, HDD power switch input) <------------ existence doubtful
*POW_FAIL (syscon input, unknown source) <--- is the same than ACIN_DET pin 41 ?
*POW_FAIL (syscon input, unknown source) <--- is the same than ACIN_DET pin 41 ?
*SB_RESET (syscon output, to south bridge)
*SB_CGRST (syscon output, to south bridge)
*RSX_RESET (syscon output, to RSX) <--------- Connected to [[RSX]] pad AW5 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]) ?
*RSX_CGRST (syscon output, to RSX) <--------- Connected to [[RSX]] pad AV6 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]) ?
*RSX_VINTE1 / VD_VINT1 (syscon input, from RSX) <--------- Connected to [[RSX]] pad AL38 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]). Exists in [[Template:Syscon_pinout_LQFP_100_pins]]
*RSX_FBVDD_SEL (syscon output, to RSX) <----- existence doubtful
*SW_HDD (syscon output, to HDD) <------------ existence doubtful

Revision as of 10:32, 23 March 2022

Bluray Drive, disc presence detector

There are 2 syscon pins dedicated to detect the disc insertion. One of pins powers a IR-LED (emitter), and the other pin is connected to a photo-transistor (receiver), both aligned with each other
When the disc interrupts the light beam a control signal is sent to syscon in the receiver pin. See BL1-001 and BL2-001

Missing lines

  • SB_RESET (syscon output, south bridge input)
  • SB_CGRST (syscon output, south bridge input)
  • RSX_RESET (syscon output, RSX input) <--------- Connected to RSX pad AW5 (RSX layout 41x41) ?
  • RSX_CGRST (syscon output, RSX input) <--------- Connected to RSX pad AV6 (RSX layout 41x41) ?
  • RSX_VINTE1 / VD_VINT1 (syscon input, RSX output) <--------- Connected to RSX pad AL38 (RSX layout 41x41). Exists in Template:Syscon_pinout_LQFP_100_pins
  • DISC_PHOT_LED (syscon output, bluray input) <--- disc insertion IR (emitter)
  • DISC_IN (syscon input, bluray output) <--- disc insertion phototransistor (receiver)
  • RSX_FBVDD_SEL (syscon output, RSX input) <----- existence doubtful
  • SW_HDD (syscon output, HDD power switch input) <------------ existence doubtful
  • POW_FAIL (syscon input, unknown source) <--- is the same than ACIN_DET pin 41 ?
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template_talk:Syscon_pinout_LQFP_128_pins&oldid=66179"