Editing Non Volatile Storage

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 44: Line 44:
{| class="wikitable sortable"
{| class="wikitable sortable"
|-
|-
! Bank # !! Block # !! Start Offset in /dev/iccnvs<block> !! Start Offset in Sflash !! Size !! Notes
! Bank # !! Block # !! Start Offset in /dev/sflash0s0x34 !! Start Offset in Sflash !! Size !! Notes
|-
|-
| 0 || 0 || 0 || 0x1C4000 || 0x8 || Platform ID (e.g 04 01 01 01 01 01 04 01)
| 0 || 0 || 0 || 0x1C4000 || 0x8 || Board ID (e.g 04 01 01 01 01 01 04 01)
|-
|-
| 0 || 0 || 0x21 || 0x1C4021 || 0x6 || Unknown (e.g 02 BC 60 A7 28 83 66)
| 0 || 0 || 0x21 || 0x1C4021 || 0x6 || Unknown (e.g 02 BC 60 A7 28 83 66)
Line 192: Line 192:
| 0 || 0 || 0x2000 || 0x1C6000 || 0x8 ||  
| 0 || 0 || 0x2000 || 0x1C6000 || 0x8 ||  
|-
|-
| 0 || 1 || 0x000 || 0x1C7000 || 0x40 ||  
| 0 || 1 || 0x3000 || 0x1C7000 || 0x40 ||  
|-
|-
| 0 || 1 || 0x018 || 0x1C7018 || 0x1  || Wlan5GHzInfo (00 Not Supported 0C Supported, some reach 8C Supported, max reach (ac?) )  
| 0 || 1 || 0x3040 || 0x1C7040 || 0x10 || trsw_attach (e.g 1F FF 00 00 07 FF FF 07 FF FF 00 00 00 00 00 00)
|-
|-
| 0 || 1 || 0x040 || 0x1C7040 || 0x10 || trsw_attach (e.g 1F FF 00 00 07 FF FF 07 FF FF 00 00 00 00 00 00)
| 0 || 1 || 0x30A0 || 0x1C70A0 || 0x2 || get_icc_max (e.g 20 9A)
|-
|-
| 0 || 1 || 0x0A0 || 0x1C70A0 || 0x2 || VrmOcp
| 0 || 1 || 0x30B0 || 0x1C70B0 || 0x1 || ????
|-
|-
| 0 || 1 || 0x0B0 || 0x1C70B0 || 0x1 || ????
| 0 || 1 || 0x30B1 || 0x1C70B1 || 0x1 || ????
|-
|-
| 0 || 1 || 0x0B1 || 0x1C70B1 || 0x1 || rtc info.corrMode
| 0 || 1 || 0x30B2 || 0x1C70B2 || 0x1 || ????
|-
|-
| 0 || 1 || 0x0B2 || 0x1C70B2 || 0x1 || rtc info.corrValue
| 0 || 1 || 0x30B3 || 0x1C70B3 || 0x1 || ????
|-
|-
| 0 || 1 || 0x0B3 || 0x1C70B3 || 0x1 || rtc info.corrValueExt
| 0 || 2 || 0x4000 || 0x1C8000 || 0xE || KibanID (e.g 33001D00836391)
|-
|-
| 0 || 1 || 0x0C0 || 0x1C70C0 || 0x1 || ????
| 0 || 2 || 0x4010 || 0x1C8010 || 0x10 || SOCUID (e.g DA 24 7A 4C FB AB D3 CA D0 95 53 7C 7B F1 45 A9)
|-
|-
| 0 || 2 || 0x000 || 0x1C8000 || 0xE || KibanID (e.g 33001D00836391)
| 0 || 2 || 0x4020 || 0x1C8020 || 0x10 || ViopData
|-
|-
| 0 || 2 || 0x010 || 0x1C8010 || 0x10 || SOCUID (e.g DA 24 7A 4C FB AB D3 CA D0 95 53 7C 7B F1 45 A9)
| 0 || 2 || 0x4030 || 0x1C8030 || 0x11 || Used in FW 5.05. Unique identifier of console, hw_info (e.g 00TS4DB00K2180050)
|-
|-
| 0 || 2 || 0x020 || 0x1C8020 || 0x10 || ViopData
| 0 || 2 || 0x4041 || 0x1C8041 || 0x1F || Used in later firmwares. Unique identifier of console, hw_model (e.g DUT-DBW00JK-S0ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ) aka Product Name
|-
|-
| 0 || 2 || 0x030 || 0x1C8030 || 0x11 || Used in FW 5.05. Unique identifier of console, hw_info (e.g 00TS4DB00K2180050)
| 0 || 2 || 0x4060 || 0x1C8060 || 0x38 || Unknown
|-
|-
| 0 || 2 || 0x041 || 0x1C8041 || 0x1F || Used in later firmwares. Unique identifier of console, hw_model (e.g DUT-DBW00JK-S0ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ) aka Product Name
| 0 || 2 || 0x4098 || 0x1C8098 || 0x8 || Unknown (e.g A8 32 2A 40 67 9E 01 30)
|-
|-
| 0 || 2 || 0x060 || 0x1C8060 || 0x38 || Unknown  
| 0 || 2 || 0x40A0 || 0x1C80A0 || 0x8 || Unknown (e.g 07 4C 11 63 6E B6 72 03)
|-
|-
| 0 || 2 || 0x098 || 0x1C8098 || 0x8 || Unknown (e.g A8 32 2A 40 67 9E 01 30)
| 0 || 2 || 0x40A8 || 0x1C80A8 || 0x4 || Unknown (e.g 07 8F 31 51)
|-
|-
| 0 || 2 || 0x0A0 || 0x1C80A0 || 0x8 || Unknown (e.g 07 4C 11 63 6E B6 72 03)
| 0 || 2 || 0x40AF || 0x1C80AF || 0x1 || Unknown (e.g C2)
|-
|-
| 0 || 2 || 0x0A8 || 0x1C80A8 || 0x4 || Unknown (e.g 07 8F 31 51)
| 0 || 2 || 0x40B0 || 0x1C80B0 || 0x8 || Unknown (e.g 01 01 01 01 06 06 06 06 FF FF)
|-
|-
| 0 || 2 || 0x0AF || 0x1C80AF || 0x1 || Unknown (e.g C2)
| 0 || 2 || 0x40C0 || 0x1C80C0 || 0xD || (e.g 0000027452252) Product Code (first 5 zeroes are Product Code Branch Number)
|-
|-
| 0 || 2 || 0x0B0 || 0x1C80B0 || 0x8 || Unknown (e.g 01 01 01 01 06 06 06 06 FF FF)
| 0 || 2 || 0x4100 || 0x1C8100 || 0x20 || (e.g 00 02 F4 C1 64 E6 83 41 0C D0 8D 91 38 56 50 AE 15 3E 60 9E 70 16 17 1A 1C 18 26 25 1B 1B F5 F7)
|-
|-
| 0 || 2 || 0x0C0 || 0x1C80C0 || 0xD || (e.g 0000027452252) Product Code (first 5 zeroes are Product Code Branch Number)
| 0 || 2 || 0x47D0 || 0x1C87D0 || 0x20 || Manufacturing Process Flags (01 enabled, 00 disabled) (e.g 01 01 01 01 01 01 01 01 01 00 00 00 00 00 00 00)
|-
|-
| 0 || 2 || 0x100 || 0x1C8100 || 0x20 || (e.g 00 02 F4 C1 64 E6 83 41 0C D0 8D 91 38 56 50 AE 15 3E 60 9E 70 16 17 1A 1C 18 26 25 1B 1B F5 F7)
| 0 || 2 || 0x47F0 || 0x1C87F0 || 0x2 || (e.g 01 FF)
|-
|-
| 0 || 2 || 0x7D0 || 0x1C87D0 || 0x20 || Manufacturing Process Flags (01 enabled, 00 disabled) (e.g 01 01 01 01 01 01 01 01 01 00 00 00 00 00 00 00)
| 0 || 4 || 0x5000 || 0x1C9000 || 0x20 || dipswitch flags, see below
|-
|-
| 0 || 2 || 0x7F0 || 0x1C87F0 || 0x2 || (e.g 01 FF) -> Disc Boot Time
| 0 || 4 || 0x5000  || 0x1C9000 || 0x1 || SCE_REGMGR_ENT_KEY_DEVENV_TOOL_boot_param (FE Development Mode) (FB Assist Mode) (FF Release Mode)
|-
|-
| 0 || 2 || 0x7FE || 0x1C87FE || 0x2 || (e.g FF FF) -> Disc Boot Time
| 0 || 4 || 0x5003 || 0x1C9003 || 0x1 || Memory Budget (0xFF Normal, 0xFE Large)
|-
|-
| 0 || 3 || 0x7B0 || 0x1C8FB0 || 0x1 || CS Config Mode
| 0 || 4 || 0x5005 || 0x1C9005 || 0x1 || Slow HDD Mode (0xFE ON) (0xFF OFF)
|-
|-
| 0 || 4 || 0x000 || 0x1C9000 || 0x20 || dipswitch flags, see below
| 0 || 4 || 0x500B || 0x1C900B || 0x1 || Unknown (0x87 on prototype DevKit)
|-
|-
| 0 || 4 || 0x000  || 0x1C9000 || 0x1 || SCE_REGMGR_ENT_KEY_DEVENV_TOOL_boot_param (FE Development Mode) (FB Assist Mode) (FF Release Mode)
| 0 || 4 || 0x5010 || 0x1C9010 || 0x1 || vsh_4K Mode (0xFE ON) (0xFF OFF)
|-
|-
| 0 || 4 || 0x003 || 0x1C9003 || 0x1 || Memory Budget (0xFF Normal, 0xFE Large)
| 0 || 4 || 0x501F || 0x1C901F || 0x1 || ??? (e.g 7F)
|-
|-
| 0 || 4 || 0x005 || 0x1C9005 || 0x1 || Slow HDD Mode (0xFE ON) (0xFF OFF)
| 0 || 4 || 0x5020 || 0x1C9020 || 0x1 || init_safe_mode flag (e.g F1)
|-
|-
| 0 || 4 || 0x00B || 0x1C900B || 0x1 || Unknown (0x87 on prototype DevKit)
| 0 || 4 || 0x5021 || 0x1C9021 || 0x1 || sysctl_machdep_cavern_dvt1_init_update
|-
|-
| 0 || 4 || 0x010 || 0x1C9010 || 0x1 || vsh_4K Mode (0xFE ON) (0xFF OFF)
| 0 || 4 || 0x5030 || 0x1C9030 || 0x1 || trsw_probe (01 for [ WLAN mode : FT ], else [ WLAN mode : OFF ]) also bt_sdio_probe and trs_probe
|-
|-
| 0 || 4 || 0x01F || 0x1C901F || 0x1 || ??? (e.g 7F)
| 0 || 4 || 0x5038 || 0x1C9038 || 0x1 || gigabyte ethernet related (gbe)
|-
|-
| 0 || 4 || 0x020 || 0x1C9020 || 0x1 || init_safe_mode flag (e.g F1)
| 0 || 4 || 0x5050 || 0x1C9050 || 0x1 || is_extra_clock_available_rtc_status
|-
|-
| 0 || 4 || 0x021 || 0x1C9021 || 0x1 || sysctl_machdep_cavern_dvt1_init_update
| 0 || 4 || 0x5060 || 0x1C9060 || 0x4 || SMI SDK version (e.g 00 00 50 02 (2.50)) (minimal version)
|-
|-
| 0 || 4 || 0x030 || 0x1C9030 || 0x1 || trsw_probe (01 for [ WLAN mode : FT ], else [ WLAN mode : OFF ]) also bt_sdio_probe and trs_probe
| 0 || 4 || 0x5064 || 0x1C9064 || 0x1 || ?????
|-
|-
| 0 || 4 || 0x038 || 0x1C9038 || 0x1 || gigabyte ethernet related (gbe)
| 0 || 4 || 0x5065 || 0x1C9065 || 0x1 || ?????
|-
|-
| 0 || 4 || 0x050 || 0x1C9050 || 0x1 || is_extra_clock_available_rtc_status
| 0 || 4 || 0x5068 || 0x1C9068 || 0x4 || Current SDK version 2 (e.g 00 00 05 05 (5.05))
|-
|-
| 0 || 4 || 0x060 || 0x1C9060 || 0x4 || SMI SDK version (e.g 00 00 50 02 (2.50)) (minimal version)
| 0 || 4 || 0x5070 || 0x1C9070 || 0x4 || manu_mode related (sdk version?)
|-
|-
| 0 || 4 || 0x064 || 0x1C9064 || 0x1 || ?????
| 0 || 4 || 0x5074 || 0x1C9074 || 0x4 || Unknown (e.g. 84 72 4E 57)
|-
|-
| 0 || 4 || 0x065 || 0x1C9065 || 0x1 || CsBackupMode
| 0 || 4 || 0x507C || 0x1C907C || 0x4 || manu_mode related (sdk version?)
|-
|-
| 0 || 4 || 0x067 || 0x1C9067 || 0x1 || ?????
| 0 || 4 || 0x5080 || 0x1C9080 || varies (0x68-0x6C) || acf token <- checked by sceSblDevActVerifyCheckExpire
|-
|-
| 0 || 4 || 0x068 || 0x1C9068 || 0x4 || Current SDK version 2 (e.g 00 00 05 05 (5.05))
| 0 || 4 || 0x5100 || 0x1C9100 || 0xF0 || sce_cam_error_put
|-
|-
| 0 || 4 || 0x070 || 0x1C9070 || 0x4 || manu_mode related (sdk version?)
| 0 || 4 || 0x5200 || 0x1C9200 || varies (0x40-0x60) || scrambled/obfuscated eap hdd key <- checked by g_crypt_deferred_init, also checked by read_idstorage
|-
|-
| 0 || 4 || 0x074 || 0x1C9074 || 0x4 || Unknown (e.g. 84 72 4E 57)
| 0 || 4 || 0x5300 || 0x1C9300 || 0x30 || sam/liverpool flags (fun stuff here) (SEE BELOW)
|-
|-
| 0 || 4 || 0x07C || 0x1C907C || 0x4 || manu_mode related (sdk version?)
| 0 || 4 || 0x5301 || 0x1C9301 || 1 || unknown (01 = enabled) (only available for prototype)
|-
|-
| 0 || 4 || 0x080 || 0x1C9080 || varies (0x68-0x6C) || acf token <- checked by sceSblDevActVerifyCheckExpire
| 0 || 4 || 0x5310 || 0x1C9310 || 1 || sam_memtest (01 = enabled)
|-
|-
| 0 || 4 || 0x100 || 0x1C9100 || 0xF0 || sce_cam_error_put
| 0 || 4 || 0x5311 || 0x1C9311 || 1 || unknown (01 = enabled) (only available for prototype)
|-
|-
| 0 || 4 || 0x200 || 0x1C9200 || varies (0x40-0x60) || scrambled/obfuscated eap hdd key <- checked by g_crypt_deferred_init, also checked by read_idstorage
| 0 || 4 || 0x5312 || 0x1C9312 || 1 || sam_rngtest (01 = enabled)
|-
|-
| 0 || 4 || 0x300 || 0x1C9300 || 0x30 || sam/liverpool flags (fun stuff here) (SEE BELOW)
| 0 || 4 || 0x531F || 0x1C931F || 1 || extra UART. 0xFF - extra UART disabled, 0x00 - extra UART enabled when ???, 0x01 - extra UART enabled
|-
|-
| 0 || 4 || 0x301 || 0x1C9301 || 1 || unknown (01 = enabled) (only available for prototype)
| 0 || 4 || 0x5320 || 0x1C9320 || 1 || lvp_configure_get_gddr5clk (0x14 = 500Mhz) (whatever value is here is multiplied by 0x19 to get final value) (0xED max value, 5925Mhz) (500Mhz will semi-brick the console with DCT errors, however for some stupid reason BwE's lets you pick ranges from 400 to 2250MHz)
|-
|-
| 0 || 4 || 0x310 || 0x1C9310 || 1 || sam_memtest (01 = enabled)
| 0 || 4 || 0x5322 || 0x1C9322 || 1 || lvp_configure_tccds
|-
|-
| 0 || 4 || 0x311 || 0x1C9311 || 1 || unknown (01 = enabled) (only available for prototype)
| 0 || 4 || 0x5323 || 0x1C9323 || 1 || sam_boot_flags (anything other than FF for enabled)
|-
|-
| 0 || 4 || 0x312 || 0x1C9312 || 1 || sam_rngtest (01 = enabled)
| 0 || 4 || 0x5329 || 0x1C9329 || 1 || related to lvp_config (likely gddr5DebugFlag, 1->Read DBI disabled, 2->Write DBI disabled, 4->ABI disabled, 8->Force auto precharge enabled, 0x10 -> Bank swap disabled, 0x20-> Bank swizzle mode disabled, 0x3F -> Everything set)
|-
|-
| 0 || 4 || 0x31F || 0x1C931F || 1 || extra UART. 0xFF - extra UART disabled, 0x00 - extra UART enabled when ???, 0x01 - extra UART enabled
| 0 || 4 || 0x53B0 || 0x1C93B0 || 1 || ????
|-
|-
| 0 || 4 || 0x320 || 0x1C9320 || 1 || lvp_configure_get_gddr5clk (0x14 = 500Mhz) (whatever value is here is multiplied by 0x19 to get final value) (0xED max value, 5925Mhz) (500Mhz will semi-brick the console with DCT errors, however for some stupid reason BwE's lets you pick ranges from 400 to 2250MHz)
| 0 || 4 || 0x5400 || 0x1C9400 || 0x800 || dev/qaf/utkn region (tokens, signatures here) (SEE BELOW)
|-
|-
| 0 || 4 || 0x322 || 0x1C9322 || 1 || lvp_configure_tccds
| 0 || 4 || 0x5400 || 0x1C9400 || 0x210 || token???
|-
|-
| 0 || 4 || 0x323 || 0x1C9323 || 1 || sam_boot_flags (anything other than FF for enabled)
| 0 || 4 || 0x5650 || 0x1C9650 || 0x290 || qafutkn_ioctl?
|-
|-
| 0 || 4 || 0x329 || 0x1C9329 || 1 || related to lvp_config (likely gddr5DebugFlag, 1->Read DBI disabled, 2->Write DBI disabled, 4->ABI disabled, 8->Force auto precharge enabled, 0x10 -> Bank swap disabled, 0x20-> Bank swizzle mode disabled, 0x3F -> Everything set)
| 0 || 4 || 0x5900 || 0x1C9900 || 0x100 || acf RSA signature
|-
|-
| 0 || 4 || 0x3B0 || 0x1C93B0 || 1 || ????  
| 0 || 4 || 0x5A00 || 0x1C9A00 || 0x190 || token???
|-
|-
| 0 || 4 || 0x400 || 0x1C9400 || 0x800 || dev/qaf/utkn region (tokens, signatures here) (SEE BELOW)
| 0 || 4 || 0x5C00 || 0x1C9C00 || 0x3C || HDD Info (e.g "GHTSH ST4501019A6E08                    613081DJ0124FZD129SN" for an HGST)
|-
|-
| 0 || 4 || 0x400 || 0x1C9400 || 0x210 || token???
| 0 || 4 || 0x5C3C || 0x1C9C3C || 0x04 || Unknown (e.g 05 C6 0A 00)
|-
|-
| 0 || 4 || 0x150 || 0x1C9650 || 0x290 || qafutkn_ioctl?
| 0 || 4 || 0x5C40 || 0x1C9C40 || 0x130 || setPupExpirationStatus
|-
|-
| 0 || 4 || 0x900 || 0x1C9900 || 0x100 || acf RSA signature
| 0 || 4 || 0x6000 || 0x1CA000 || 0x300 || wrappNvsRead, or regMgrNvsRead
|-
|-
| 0 || 4 || 0xA00 || 0x1C9A00 || 0x190 || token???
| 0 || 4 || 0x600E || 0x1CA00E || 0x1 || Unknown (Not Regions)
|-
|-
| 0 || 4 || 0xC00 || 0x1C9C00 || 0x3C || HDD Info (e.g "GHTSH ST4501019A6E08                    613081DJ0124FZD129SN" for an HGST)
| 0 || 4 || 0x6040 || 0x1CA040 || 0x1 || Circle Button Behaviour (0x01 is Circle Go Back) (0x00 is Circle Accept)
|-
|-
| 0 || 4 || 0xC3C || 0x1C9C3C || 0x04 || Unknown (e.g 05 C6 0A 00)
| 0 || 4 || 0x6300 || 0x1CA300 || 0x300 || wrappNvsRead, or regMgrNvsRead
|-
|-
| 0 || 4 || 0xC40 || 0x1C9C40 || 0x130 || setPupExpirationStatus
| 0 || 4 || 0x6600 || 0x1CA600 || 0x20 || Modes (See Below)
|-
|-
| 0 || 4 || 0x1000 || 0x1CA000 || 0x300 || wrappNvsRead, or regMgrNvsRead
| 0 || 4 || 0x6600 || 0x1CA600 || 0x1 || SCE_REGMGR_ENT_KEY_SYSTEM_SPECIFIC_idu_mode (0x01 Enabled 0x00 or 0xFF Disabled)
|-
|-
| 0 || 4 || 0x100E || 0x1CA00E || 0x1 || Unknown (Not Regions)
| 0 || 4 || 0x6601 || 0x1CA601 || 0X1 || SCE_REGMGR_ENT_KEY_SYSTEM_update_mode (0xFF or 0x00 disabled) (0x10, 0x20, 0x30, 0x31, 0x32, 0x50 enabled)
|-
|-
| 0 || 4 || 0x1040 || 0x1CA040 || 0x1 || Circle Button Behaviour (0x01 is Circle Go Back) (0x00 is Circle Accept)
| 0 || 4 || 0x6602 || 0x1CA602 || 0x1 || SCE_REGMGR_ENT_KEY_SYSTEM_SPECIFIC_show_mode (0x01 Enabled 0x00 Disabled) (Testkit Only!)
|-
|-
| 0 || 4 || 0x1300 || 0x1CA300 || 0x300 || wrappNvsRead, or regMgrNvsRead
| 0 || 4 || 0x6603 || 0x1CA603 || 0x1 || SCE_REGMGR_ENT_KEY_REGISTRY_recover
|-
|-
| 0 || 4 || 0x1600 || 0x1CA600 || 0x20 || Modes (See Below)
| 0 || 4 || 0x6604 || 0x1CA604 || 0x4 || SCE_REGMGR_ENT_KEY_SYSTEM_soft_version (deprecated) (devkit only?)
|-
|-
| 0 || 4 || 0x1600 || 0x1CA600 || 0x1 || SCE_REGMGR_ENT_KEY_SYSTEM_SPECIFIC_idu_mode (0x01 Enabled 0x00 or 0xFF Disabled)
| 0 || 4 || 0x6609 || 0x1CA609 || 0x1 || SCE_REGMGR_ENT_KEY_SYSTEM_SPECIFIC_arcade_mode
|-
|-
| 0 || 4 || 0x1601 || 0x1CA601 || 0X1 || SCE_REGMGR_ENT_KEY_SYSTEM_update_mode (0xFF or 0x00 disabled) (0x10, 0x20, 0x30, 0x31, 0x32, 0x50 enabled)
| 0 || 4 || 0x7C00 || 0x1CBC00 || 0x20 || manufacturing mode (all zeroes for enabled, all FFs for disabled)
|-
|-
| 0 || 4 || 0x1602 || 0x1CA602 || 0x1 || SCE_REGMGR_ENT_KEY_SYSTEM_SPECIFIC_show_mode (0x01 Enabled 0x00 Disabled) (Testkit Only!)
| 0 || 4 || 0x7C40 || 0x1CBC40 || 0x20 ||  
|-
|-
| 0 || 4 || 0x1603 || 0x1CA603 || 0x1 || SCE_REGMGR_ENT_KEY_REGISTRY_recover
| 0 || 4 || 0x7CC0 || 0x1CBCC0 || 0x20 || srtc_modevent
|-
| 0 || 4 || 0x1604 || 0x1CA604 || 0x4 || SCE_REGMGR_ENT_KEY_SYSTEM_soft_version (deprecated) (devkit only?)
|-
| 0 || 4 || 0x1609 || 0x1CA609 || 0x1 || SCE_REGMGR_ENT_KEY_SYSTEM_SPECIFIC_arcade_mode
|-
| 0 || 4 || 0x2C00 || 0x1CBC00 || 0x20 || manufacturing mode (all zeroes for enabled, all FFs for disabled)
|-
| 0 || 4 || 0x2C40 || 0x1CBC40 || 0x20 ||
|-
| 0 || 4 || 0x2CC0 || 0x1CBCC0 || 0x20 || srtc_modevent
|-
|-
| ? || ? || ??? || 0x1CF000 || 1 || ?? FF disabled 00 enabled
| ? || ? || ??? || 0x1CF000 || 1 || ?? FF disabled 00 enabled
|}
|}
Please note that all contributions to PS4 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS4 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)