Flash (Hardware): Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
 
(19 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Category:Hardware]]
= Flash =
= Flash =
The PS3 uses a NOR interface from the [[South Bridge]] to address the main firmware flash. On NAND based consoles, it uses the [[Starship2]] as an interleaving bridge chip to the two NAND flash, while on NOR based consoles the single NOR flash is connected directly to the [[South Bridge]].
The PS3 uses a NOR interface from the [[South Bridge]] to address the main firmware flash. On NAND based consoles, it uses the [[Starship2]] as an interleaving bridge chip to the two NAND flash, while on NOR based consoles the single NOR flash is connected directly to the [[South Bridge]].
<Gallery>
File:Spansion flash product code.jpg|Spansion flash<br>product code
</Gallery>


== SKU Differentiation ==
== SKU Differentiation ==
Line 7: Line 10:


===Retail===
===Retail===
 
{{Flash types and models used by PS3}}
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! rowspan="3" colspan="2"  | Flash !! colspan="7" | FAT !! colspan="5" | SLIM !! rowspan="3" | Notes
|-
! CECHA<br />CECHB !! CECHC<br />CECHE !! CECHE !! CECHG !! CECHH !! CECHK !! CECHL<br />CECHM<br />CECHP<br />CECHQ !! CECH-20.. !! CECH-21.. !! CECH-25.. !! CECH-25.. !! CECH-30..
|-
! COK<br />001 !! COK<br />002 !! COK<br />002W !! SEM<br />001 !! DIA<br />001 !! DIA<br />002 !! VER<br />001 !! DYN<br />001 !! SUR<br />001 !! JTP<br />001 !! JSD<br />001 !! KTE<br />001
|-
| rowspan="2" | '''NAND''' || 2x Samsung K9F1G08U0A-PIB0 || {{Yes}} || {{Yes}} || - || - || {{No}} || {{No}} || {{No}} || {{No}} || {{No}} || {{No}} || {{No}} || {{No}} || 
|-
| 2x Samsung K9F1G08U0B-PIB0 || - || - || - || {{Yes}} || {{No}} || {{No}} || {{No}} || {{No}} || {{No}} || {{No}} || {{No}} || {{No}} || 
|-
| rowspan="5" | '''NOR''' || 1x Spansion S29GL128N90TFIR2 || {{No}} || {{No}} || {{No}} || {{No}} || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || - || - || - || - || 
|-
| 1x Samsung K8Q2815UQB-PI4B || {{No}} || {{No}} || {{No}} || {{No}} || - || - || {{Yes}} || {{Yes}} || {{Yes}} || - || - || - || 
|-
| 1x Spansion S29GL128P90TFIR2 || {{No}} || {{No}} || {{No}} || {{No}} || - || - || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || {{Yes}} || 
|-
| 1x Samsung K8P2716UZC-QI4D || {{No}} || {{No}} || {{No}} || {{No}} || - || - || - || - || - || {{Yes}} || {{Yes}} || {{Yes}} || 
|-
| 1x Macronix MX29GL128ELT2I-90G || {{No}} || {{No}} || {{No}} || {{No}} || - || - || - || {{Yes}} || {{Yes}} || - || - || {{Yes}} || 
|-
|}


===Non Retail===
===Non Retail===
Reference Tool DECR1000A Communication Processor board :
Reference Tool DECR1000A Communication Processor board :
1x Samsung K9F2G08U0M (NAND 1x2Gbit=256MB total)
1x [[K9F2G08U0M|Samsung K9F2G08U0M]] (NAND 1x2Gbit=256MB total)
 
== Pinout Flash chips ==
 
=== NAND ===
 
==== Samsung K9F1G08U0A-PIB0 or K9F1G08UOB-PIB0 (NAND) ====
 
<div style="float:right">[[File:TOSP1-48pin.png|200px|thumb|left|48-pin TSOP1 Standard Type<br /> 12mm x 20mm<br />Samsung K9F1G08U0A-PIB0]]<br />[[File:Samsung_K9F1G08U0A-PIB0.JPG|200px|thumb|left|One of the 2 Samsung K9F1G08U0A-PIB0 on a NAND based FAT]]</div>
 
[http://www.trisaster.de/file/sony/ps3/hardware/K9F1G08U0A.pdf Datasheet]
 
<pre>productcode meaning:
K - Memory
9 - NAND Flash
F - Small Classification : SLC Normal
1G - Density : 1Gigabit (128MB)
0 - Technology : Normal (x8)
8 - Organisation : x8
U - Vcc Supply Voltage : min 2.7V - Max 3.6V / typ. 3.3V
0 - Mode : Normal
A - Generation : 2nd
-
P - Package : 48pin TSOP1 (12mm x 20mm / 0.5mm pitch)) Lead-free
I - Temperature : Industrial
B - Customer Bad Block : Include Bad Block
0 - PreProgram Version : None</pre>
 
<table><tr><td>
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 1 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 2 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 3 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 4 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 5 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 6 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 7 || R/B || Read/Busy Output
|-
| 8 || RE || Read Enable
|-
| 9 || CE || Chip Enable
|-
| 10 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 11 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 12 || Vcc || Vcc (min 2.7V-max 3.6V / typ 3.3V)
|-
| 13 || Vss || Ground
|-
| 14 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 15 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 16 || CLE || Command Latch Enable
|-
| 17 || ALE || Address Latch Enable
|-
| 18 || WE || Write Enable
|-
| 19 || WP || Write Protect
|-
| 20 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 21 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 22 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 23 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 24 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
</td><td>&nbsp;&nbsp;</td><td>
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 48 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 47 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 46 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 45 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 44 || I/O7 ||
|-
| 43 || I/O6 ||
|-
| 42 || I/O5 ||
|-
| 41 || I/O4 ||
|-
| 40 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 39 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 38 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 37 || Vcc || Vcc (min 2.7V-max 3.6V / typ 3.3V)
|-
| 36 || Vss || Ground
|-
| 35 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 34 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 33 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 32 || I/O3 ||
|-
| 31 || I/O2 ||
|-
| 30 || I/O1 ||
|-
| 29 || I/O0 ||
|-
| 28 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 27 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 26 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 25 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
</td></tr></table>
 
 
==== Samsung K9F2G08U0M (NAND) ====
1x 2 Gbit NAND as used on Reference Tool DECR1000A Communication Processor board
 
<div style="float:right">[[File:TSOP1-2Gbit.png|200px|thumb|left|Samsung K9F2G08U0M<br />48-pin TSOP1 Standard Type 12mm x 20mm<br />used on Reference Tool DECR1000A Communication Processor board]]</div>
 
[http://www.multiupload.com/0ADYZHSVKL Datasheet]
 
<pre>productcode meaning:
K - Memory
9 - NAND Flash
F - Small Classification : SLC Normal
2G - Density : 2Gigabit (256MB)
0 - Technology : Normal (x8)
8 - Organisation : x8
U - Vcc Supply Voltage : min 2.7V - Max 3.6V / typ. 3.3V
0 - Mode : Normal
M - Generation :
-
?P - Package : 48pin TSOP1 (12mm x 20mm / 0.5mm pitch)) Lead-free
?I - Temperature : Industrial
?B - Customer Bad Block : Include Bad Block
?0 - PreProgram Version : None</pre>
 
<table><tr><td>
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 1 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 2 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 3 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 4 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 5 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 6 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 7 || R/B || Read/Busy Output
|-
| 8 || RE || Read Enable
|-
| 9 || CE || Chip Enable
|-
| 10 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 11 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 12 || Vcc || Vcc (min 2.7V-max 3.6V / typ 3.3V)
|-
| 13 || Vss || Ground
|-
| 14 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 15 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 16 || CLE || Command Latch Enable
|-
| 17 || ALE || Address Latch Enable
|-
| 18 || WE || Write Enable
|-
| 19 || WP || Write Protect
|-
| 20 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 21 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 22 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 23 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 24 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
</td><td>&nbsp;&nbsp;</td><td>
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 48 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 47 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 46 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 45 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 44 || I/O7 ||
|-
| 43 || I/O6 ||
|-
| 42 || I/O5 ||
|-
| 41 || I/O4 ||
|-
| 40 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 39 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 38 || PRE || Power-On Read Enable<br /><small>PRE controls auto read operation executed during power-on. <br />Power-on auto-read is enabled when PRE pin is tied to VCC.</small>
|-
| 37 || Vcc || Vcc (min 2.7V-max 3.6V / typ 3.3V)
|-
| 36 || Vss || Ground
|-
| 35 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 34 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 33 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 32 || I/O3 ||
|-
| 31 || I/O2 ||
|-
| 30 || I/O1 ||
|-
| 29 || I/O0 ||
|-
| 28 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 27 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 26 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 25 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
</td></tr></table>


== Other Flash ==


 
=== Renesas HN58X2504TIE (EEPROM) ===
=== NOR ===
 
==== Spansion S29GL128N90TFIR2 (NOR) ====
 
<div style="float:right">[[File:S29GLxxxN.png|200px|thumb|left|56-pin TSOP1 Standard Type<br />14mm x 20mm<br />Spansion S29GLxxxN]]</div>
 
[http://www.sltdigital.com/product/product_pdf/sencond_hdx_ic/memory/S29GL256.pdf Datasheet]
 
<pre>productcode meaning:
S29GL128N - 3.0 Volt-only, 512 Megabit (32M x 16-bit/64Mx8-bit), Page-Mode, Flash Memory, 110nm
90 - Speed option : 90ns
T - Package type: TSOP
F - Package materials set : Lead-free
I - Temperature range : Industrial
R2 - ?Vio = 2.7 to 3.6V, lowest address sector protected?</pre>
 
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 1 || '''A23''' || No Connection for S29GL128N
|-
| 2 || A22 ||
|-
| 3 || A15 ||
|-
| 4 || A14 ||
|-
| 5 || A13 ||
|-
| 6 || A12 ||
|-
| 7 || A11 ||
|-
| 8 || A10 ||
|-
| 9 || A9 ||
|-
| 10 || A8 ||
|-
| 11 || A19 ||
|-
| 12 || A20 ||
|-
| 13 || WE# || Write Enable
|-
| 14 || RESET# || Reset
|-
| 15 || A21 ||
|-
| 16 || '''WP#/ACC''' || '''Write Protect / Accelerated Program Operation'''
|-
| 17 || RD/BY# || Ready/Busy Output
|-
| 18 || A18 ||
|-
| 19 || A17 ||
|-
| 20 || A7 ||
|-
| 21 || A6 ||
|-
| 22 || A5 ||
|-
| 23 || A4 ||
|-
| 24 || A3 ||
|-
| 25 || A2 ||
|-
| 26 || A1 ||
|-
| 27 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 28 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 29 || Vio || Vio - Output Buffer Power
|-
| 30 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 31 || A0 ||
|-
| 32 || CE# || Chip Enable
|-
| 33 || VSS || Ground
|-
| 34 || OE# || Output Enable
|-
| 35 || DQ0 ||
|-
| 36 || DQ8 ||
|-
| 37 || DQ1 ||
|-
| 38 || DQ9 ||
|-
| 39 || DQ2 ||
|-
| 40 || DQ10 ||
|-
| 41 || DQ3 ||
|-
| 42 || DQ11 ||
|-
| 43 || Vcc || Vcc (min 2.7V-max 3.6V / typ 3.0V)
|-
| 44 || DQ4 ||
|-
| 45 || DQ12 ||
|-
| 46 || DQ5 ||
|-
| 47 || DQ13 ||
|-
| 48 || DQ6 || '''*OTP?'''
|-
| 49 || DQ14 ||
|-
| 50 || DQ7 || '''*OTP?'''
|-
| 51 || DQ15'''/A-1''' ||
|-
| 52 || VSS || Ground
|-
| 53 || '''#BYTE''' || BYTE# Selects 8-bit or 16-bit mode (NC on Samsung K8Q2815UQB-PI4B NOR)
|-
| 54 || A16 ||
|-
| 55 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 56 || A24 || No Connection for S29GL128N and S29GL256N
|-
|}
 
==== Spansion S29GL128P90TFIR2 (NOR) ====
 
<div style="float:right">[[File:S29GLxxxP.png|200px|thumb|left|56-pin TSOP1 Standard Type<br />14mm x 20mm<br />Spansion S29GLxxxP]]</div>
 
[http://www.spansion.com/Support/Datasheets/S29GL-P_00.pdf Datasheet]
 
<pre>productcode meaning:
S29GL128P - 3.0 Volt-only, 512 Megabit (32M x 16-bit/64Mx8-bit), Page-Mode, Flash Memory, 90nm
90 - Speed option : 90ns
T - Package type: TSOP
F - Package materials set : Lead-free
I - Temperature range : Industrial
R2 - ?Vio = 2.7 to 3.6V, lowest address sector protected?</pre>
 
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 1 || '''A23''' || No Connection for S29GL128P
|-
| 2 || A22 ||
|-
| 3 || A15 ||
|-
| 4 || A14 ||
|-
| 5 || A13 ||
|-
| 6 || A12 ||
|-
| 7 || A11 ||
|-
| 8 || A10 ||
|-
| 9 || A9 ||
|-
| 10 || A8 ||
|-
| 11 || A19 ||
|-
| 12 || A20 ||
|-
| 13 || WE# || Write Enable
|-
| 14 || RESET# || Reset
|-
| 15 || A21 ||
|-
| 16 || WP#/ACC || Write Protect / Accelerated Program Operation
|-
| 17 || RY/BY# || Ready/Busy Output
|-
| 18 || A18 ||
|-
| 19 || A17 ||
|-
| 20 || A7 ||
|-
| 21 || A6 ||
|-
| 22 || A5 ||
|-
| 23 || A4 ||
|-
| 24 || A3 ||
|-
| 25 || A2 ||
|-
| 26 || A1 ||
|-
| 27 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 28 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 29 || Vio || Vio - Output Buffer Power
|-
| 30 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 31 || A0 ||
|-
| 32 || CE# || Chip Enable
|-
| 33 || VSS || Ground
|-
| 34 || OE# || Output Enable
|-
| 35 || DQ0 ||
|-
| 36 || DQ8 ||
|-
| 37 || DQ1 ||
|-
| 38 || DQ9 ||
|-
| 39 || DQ2 ||
|-
| 40 || DQ10 ||
|-
| 41 || DQ3 ||
|-
| 42 || DQ11 ||
|-
| 43 || Vcc || Vcc (min 2.7V-max 3.6V / typ 3.0V)
|-
| 44 || DQ4 ||
|-
| 45 || DQ12 ||
|-
| 46 || DQ5 ||
|-
| 47 || DQ13 ||
|-
| 48 || DQ6 || '''*OTP?'''
|-
| 49 || DQ14 ||
|-
| 50 || DQ7 || '''*OTP?'''
|-
| 51 || DQ15'''/A-1''' ||
|-
| 52 || VSS || Ground
|-
| 53 || '''#BYTE''' || BYTE# Selects 8-bit or 16-bit mode (NC on Samsung K8Q2815UQB-PI4B NOR)
|-
| 54 || A16 ||
|-
| 55 || style="color:white; background-color:darkgrey;" | A25 || style="color:white; background-color:darkgrey;" | No Connection for S29GL128P, S29GL256P and S29GL512P
|-
| 56 || A24 || No Connection for S29GL128P and S29GL256P
|-
|}
 
==== Samsung K8Q2815UQB-PI4B (NOR) ====
 
<div style="float:right">[[File:TOSP1-56pin.png|200px|thumb|left|56-pin TSOP1 Standard Type<br />14mm x 20mm]]<br />[[File:Samsung K8Q2815UQB-PI4B (NOR).jpg|200px|thumb|left|Samsung K8Q2815UQB-PI4B (NOR) as seen on modern PS3 Slim]]</div>
 
[http://www.samsung.com/global/system/business/semiconductor/product/2007/8/7/144546ds_k8q2815uqb_rev11.pdf Datasheet]
 
<pre>productcode meaning:
K - Memory
8 - NOR Flash
Q - Small Classification : Page Mode DDP
28 - Density : 128M, 8M / 16Bank / 8^8
15 - Dual Bank Boot Block (Bank1, Bank2) : 16M, 2M / 14M
U - Vcc : 3.0V / 3.3V (2.7V~3.6V)
Q - Device Type: Top and Bottom Boot Block
B - Generation : 3rd Generation
-
P - Package : TSOP1 (Lead Free)
I - Temp : Industrial
4B - Speed : 60ns/25ns (Page)</pre>
 
=====NOTE=====
Multiple Bank architectures (8 banks)
- Bank 0 : 8Mbit (4Kw x 8 and 32Kw x 15)
- Bank 1 :24Mbit (32Kw x 48)
- Bank 2 : 24Mbit (32Kw x 48)
- Bank 3 : 8Mbit (4Kw x 8 and 32Kw x 15)
- Bank 4 : 8Mbit (4Kw x 8 and 32Kw x 15)
- Bank 5 :24Mbit (32Kw x 48)
- Bank 6 : 24Mbit (32Kw x 48)
- Bank 7 : 8Mbit (4Kw x 8 and 32Kw x 15)
OTP Block : Extra 256 word
- 128word for factory and 128word for customer OTP (only on first Virtual Chip, A22=low)
 
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 1 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 2 || A22 || Virtual Chip Enable of 2nd Chip
|-
| 3 || A15 ||
|-
| 4 || A14 ||
|-
| 5 || A13 ||
|-
| 6 || A12 ||
|-
| 7 || A11 ||
|-
| 8 || A10 ||
|-
| 9 || A9 ||
|-
| 10 || A8 ||
|-
| 11 || A19 ||
|-
| 12 || A20 ||
|-
| 13 || WE || Write Enable
|-
| 14 || RESET || Reset
|-
| 15 || A21 ||
|-
| 16 || WP/ACC || Write Protect / Accelerated Program Operation
|-
| 17 || RD/BY || Ready/Busy Output
|-
| 18 || A18 ||
|-
| 19 || A17 ||
|-
| 20 || A7 ||
|-
| 21 || A6 ||
|-
| 22 || A5 ||
|-
| 23 || A4 ||
|-
| 24 || A3 ||
|-
| 25 || A2 ||
|-
| 26 || A1 ||
|-
| 27 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 28 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 29 || VCCQ || VccQ
|-
| 30 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 31 || A0 ||
|-
| 32 || CE || Chip Enable
|-
| 33 || VSS || Ground
|-
| 34 || OE || Output Enable
|-
| 35 || DQ0 ||
|-
| 36 || DQ8 ||
|-
| 37 || DQ1 ||
|-
| 38 || DQ9 ||
|-
| 39 || DQ2 ||
|-
| 40 || DQ10 ||
|-
| 41 || DQ3 ||
|-
| 42 || DQ11 ||
|-
| 43 || Vcc || Vcc (min 2.7V-max 3.6V / typ 3.0V)
|-
| 44 || DQ4 ||
|-
| 45 || DQ12 ||
|-
| 46 || DQ5 ||
|-
| 47 || DQ13 ||
|-
| 48 || DQ6 || *OTP?
|-
| 49 || DQ14 ||
|-
| 50 || DQ7 || *OTP?
|-
| 51 || DQ15 ||
|-
| 52 || VSS || Ground
|-
| 53 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 54 || A16 ||
|-
| 55 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 56 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
 
*OTP Block Region : 256-word Flash memory region. The data DQ6=1 for customer locked and DQ7=1 for factory locked
 
==== Samsung K8P2716UZC-QI4D (NOR) ====
<div style="float:right">[[File:54TSOP1-Samsung K8P2716UZC-QI4D.png|200px|thumb|left|56-pin TSOP1 Standard Type<br />14mm x 20mm<br />as used for Samsung K8P2716UZC-QI4D]]<br />[[File:K8P2716UZC-QI40.jpg|200px|thumb|left|Samsung K8P2716UZC-QI4D as seen on some JSD-001 boards]]</div>
 
[http://www.samsung.com/global/system/business/semiconductor/product/2010/11/26/478704ds_k8p2716uzc_rev10.pdf Datasheet]
 
<pre>productcode meaning:
K - Memory
8 - NOR Flash
P
27 - Density : 128M x8/x16
18 - Dual Bank Boot Block :
U - Vcc : 3.0V / 3.3V (2.7V~3.6V)
Z - Device Type:
C - Generation : 4rd Generation
-
Q - Package : 56TSOP1
I - Temp : Industrial
4D - Speed : 70ns/30ns(Page)</pre>
 
 
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 1 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 2 || A22 ||
|-
| 3 || A15 ||
|-
| 4 || A14 ||
|-
| 5 || A13 ||
|-
| 6 || A12 ||
|-
| 7 || A11 ||
|-
| 8 || A10 ||
|-
| 9 || A9 ||
|-
| 10 || A8 ||
|-
| 11 || A19 ||
|-
| 12 || A20 ||
|-
| 13 || WE# || Write Enable
|-
| 14 || RESET# || Reset
|-
| 15 || A21 ||
|-
| 16 || WP#/ACC || Write Protect / Accelerated Program Operation
|-
| 17 || RD/BY# || Ready/Busy Output
|-
| 18 || A18 ||
|-
| 19 || A17 ||
|-
| 20 || A7 ||
|-
| 21 || A6 ||
|-
| 22 || A5 ||
|-
| 23 || A4 ||
|-
| 24 || A3 ||
|-
| 25 || A2 ||
|-
| 26 || A1 ||
|-
| 27 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 28 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 29 || Vio || Vio - Output Buffer Power
|-
| 30 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 31 || A0 ||
|-
| 32 || CE# || Chip Enable
|-
| 33 || VSS || Ground
|-
| 34 || OE# || Output Enable
|-
| 35 || DQ0 ||
|-
| 36 || DQ8 ||
|-
| 37 || DQ1 ||
|-
| 38 || DQ9 ||
|-
| 39 || DQ2 ||
|-
| 40 || DQ10 ||
|-
| 41 || DQ3 ||
|-
| 42 || DQ11 ||
|-
| 43 || Vcc || Vcc (min 2.7V-max 3.6V / typ 3.0V)
|-
| 44 || DQ4 ||
|-
| 45 || DQ12 ||
|-
| 46 || DQ5 ||
|-
| 47 || DQ13 ||
|-
| 48 || DQ6 ||
|-
| 49 || DQ14 ||
|-
| 50 || DQ7 ||
|-
| 51 || DQ15'''/A-1''' ||
|-
| 52 || VSS || Ground
|-
| 53 || '''#BYTE''' || BYTE# Selects 8-bit or 16-bit mode
|-
| 54 || A16 ||
|-
| 55 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 56 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
 
 
==== Macronix MX29GL128ELT2I-90G (NOR) ====
 
<div style="float:right">[[File:TOSP1-56pin.png|200px|thumb|left|56-pin TSOP1 Standard Type<br />14mm x 20mm]]<br />[[File:Macronix MX29GL128ELT2I-90G (NOR Flash).jpg|200px|thumb|left|Macronix MX29GL128ELT2I-90G (NOR) as seen on CECH-30.. according to some sources]]</div>
 
[http://www.mxic.com.tw/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/DBACA1C90564EBB248257639003A563A/$File/MX29GL128E,%203V,%20128Mb,%20v1.1.pdf Datasheet]
 
<pre>productcode meaning:
MX29GL Series
3V
128 Mb
16M x 8/8M x 16
90ns
Parallel Flash
TSOP-56
</pre>
 
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 1 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 2 || A22 ||
|-
| 3 || A15 ||
|-
| 4 || A14 ||
|-
| 5 || A13 ||
|-
| 6 || A12 ||
|-
| 7 || A11 ||
|-
| 8 || A10 ||
|-
| 9 || A9 ||
|-
| 10 || A8 ||
|-
| 11 || A19 ||
|-
| 12 || A20 ||
|-
| 13 || WE# || Write Enable
|-
| 14 || RESET# || Reset
|-
| 15 || A21 ||
|-
| 16 || WP#/ACC || Write Protect / Accelerated Program Operation
|-
| 17 || RD/BY# || Ready/Busy Output
|-
| 18 || A18 ||
|-
| 19 || A17 ||
|-
| 20 || A7 ||
|-
| 21 || A6 ||
|-
| 22 || A5 ||
|-
| 23 || A4 ||
|-
| 24 || A3 ||
|-
| 25 || A2 ||
|-
| 26 || A1 ||
|-
| 27 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 28 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin !! Usage !! Remarks
|-
| 29 || VI/O || Vcc I/O (min 2.7V-max 3.6V / typ 3.0V)
|-
| 30 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 31 || A0 ||
|-
| 32 || CE# || Chip Enable
|-
| 33 || GND || Ground
|-
| 34 || OE# || Output Enable
|-
| 35 || Q0 ||
|-
| 36 || Q8 ||
|-
| 37 || Q1 ||
|-
| 38 || Q9 ||
|-
| 39 || Q2 ||
|-
| 40 || Q10 ||
|-
| 41 || Q3 ||
|-
| 42 || Q11 ||
|-
| 43 || Vcc || Vcc (min 2.7V-max 3.6V / typ 3.0V)
|-
| 44 || Q4 ||
|-
| 45 || Q12 ||
|-
| 46 || Q5 ||
|-
| 47 || Q13 ||
|-
| 48 || Q6 ||
|-
| 49 || Q14 ||
|-
| 50 || Q7 ||
|-
| 51 || Q15/A-1 || Q15 (Word Mode) / LSB addr (Byte Mode)
|-
| 52 || GND || Ground
|-
| 53 || BYTE# || Selects 8bits or 16bits mode
|-
| 54 || A16 ||
|-
| 55 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
| 56 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection
|-
|}
 
=== Pinout Other ===
 
==== Renesas HN58X2504TIE (EEPROM) ====
<div style="float:right">[[File:TSSOP-8pin-HN58X2504TIE.png|200px|thumb|left|8-pin TSSOP<br />Renesas HN58X2504TIE]]</div>
<div style="float:right">[[File:TSSOP-8pin-HN58X2504TIE.png|200px|thumb|left|8-pin TSSOP<br />Renesas HN58X2504TIE]]</div>
Note: although [http://www.edepot.com/playstation3.html#Super_Secrets edepot&others] lists it on the board, I can only find this IC in the sixaxis. <br />
Note: although [http://www.edepot.com/playstation3.html#Super_Secrets edepot&others] lists it on the board, I can only find this IC in the sixaxis. <br />
Line 1,080: Line 71:
|-
|-
|}
|}
{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>

Latest revision as of 17:46, 30 October 2015

Flash[edit | edit source]

The PS3 uses a NOR interface from the South Bridge to address the main firmware flash. On NAND based consoles, it uses the Starship2 as an interleaving bridge chip to the two NAND flash, while on NOR based consoles the single NOR flash is connected directly to the South Bridge.

  • Spansion flash product code

    Spansion flash
    product code

SKU Differentiation[edit | edit source]

For a difference between models, see SKU Models

Retail[edit | edit source]

Flash types and models used by PS3
[edit]
Flash Type / Model PS3 Fat PS3 Slim PS3 SuperSlim notes
CECHA
CECHB		 CECHC
CECHE		 CECHE CECHG CECHH
CECHM
CECHQ		 CECHJ
CECHK		 CECHL
CECHP
 CECH-20xx CECH-21xx CECH-25xx CECH-25xx CECH-30xx CECH-40xxB/C CECH-40xxB/C CECH-40xxA
'12GB' noHDD
COK
001		 COK
002		 COK
002W		 SEM
001		 DIA
001		 DIA
002		 VER
001		 DYN
001		 SUR
001		 JTP
001		 JSD
001		 KTE
001		 MSX
001		 MPX
001		 MPX
001
NAND 2x Samsung K9F1G08U0A-PIB0 Yes Yes Yes - No No No No No No No No No No No
2x Samsung K9F1G08U0B-PIB0 - - - Yes No No No No No No No No No No No
NOR 1x Spansion S29GL128N90TFIR2 No No No No Yes Yes Yes Yes - - - - - - No
1x Samsung K8Q2815UQB-PI4B No No No No - - Yes Yes Yes - - - - - No
1x Spansion S29GL128P90TFIR2 No No No No - - Yes Yes Yes Yes Yes Yes Yes Yes No
1x Macronix MX29GL128ELT2I-90G No No No No - - - Yes Yes Yes yes ? Yes No
1x Samsung K8P2716UZC-QI4D No No No No Yes - - - - Yes Yes Yes No
1x Macronix MX29GL128FLT2I-90G No No No No - - - - - - - - Yes Yes No
eMMC 1x Panasonic MN66840 +
1x Samsung KLMAG2GE4A-A001		 No No No No No No No No No No No No No No Yes
connection type NAND layout 1 NOR layout 1 NOR layout 2 NOR layout 3 NOR layout 4 NOR layout 5 eMMC layout


Non Retail[edit | edit source]

Reference Tool DECR1000A Communication Processor board : 1x Samsung K9F2G08U0M (NAND 1x2Gbit=256MB total)

Other Flash[edit | edit source]

Renesas HN58X2504TIE (EEPROM)[edit | edit source]

8-pin TSSOP
Renesas HN58X2504TIE

Note: although edepot&others lists it on the board, I can only find this IC in the sixaxis.
Datasheet 

productcode meaning:
H - 
N - 
5 -
8 - Organisation : x8bit
X - 
2 - 
5 - 
0 - 
4 - Density : 4-kbit (512x8bit)
T - Package : 8pin plastic TSSOP (TTP-8DAV)
I - Temp : Industrial (-40 to +85 °C 
E - Environment : Lead Free


Each PS3 has a special EEPROM chip on the motherboard using a SPI Serial Interface Renasas chip.

Type Size Speed Voltage Packaging Manufacturer Serial Number Description
EEPROM 4-kbit (512x8bit) 3MHz 1.8V to 5.5V 8-pin TSSOP Renesas HN58X2504TIE PS3 EEPROM chip


Pin Usage Remarks
1 S Chip Select
2 Q Serial data output
3 W Write Protect
4 VSS Ground
5 D Serial data input
6 C Serial Clock
7 HOLD Hold
8 VCC Vcc (min 1.8V-max 5.5V)


Syscon
CXR713F Series
CELL
90 nm
65 nm
45 nm
RSX
90 nm
65 nm
40 nm
28 nm
CELL RAM
(XDR)
Elpida
Qimonda
Samsung
RSX RAM
(GDDR3 or 5)
Elpida
Infineon & Qimonda
Samsung
Hynix
PS2
Compatibility
EEGS
RDRAM
Bridge
South Bridge
Starship2
Flash
NAND
Samsung
NOR
Macronix
Samsung
Spansion
eMMC
Samsung
Panasonic
BD SATA/PATA
BD Controllers
On BD board
Sony
Renesas SCEI
Integrated
Sony
Renesas SCEI
Others
IDT SCEI
Wireless
Connectors
Other
Diverse Comp.
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Flash_(Hardware)&oldid=39506"