RSX: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
No edit summary
Line 285: Line 285:
[INFO]: BE:3.1, SB:DX3.2
[INFO]: BE:3.1, SB:DX3.2
rsx:      b01 500/650 vpe:ff shd:7d [G1A778601:1:2:15:7:10:3:7:2][16:3:0:0:1:3:0]
rsx:      b01 500/650 vpe:ff shd:7d [G1A778601:1:2:15:7:10:3:7:2][16:3:0:0:1:3:0]
[INFO]: BE:3.1, SB:DX3.2
rsx:      b02 500/650 vpe:ff shd:3f  [G2A874100:1:2:e:4:6:3:9:2][16:3:0:0:1:2:1][0:0:0]


[INFO]: BE:3.1, SB:DX3.2
[INFO]: BE:3.1, SB:DX3.2

Revision as of 06:19, 1 February 2017

RSX - Reality Synthesizer
1st generation 90nm
CXD2971DGB

RSX - Reality Synthesizer
1st generation 90nm
CXD2971AGB without IHS

RSX - Reality Synthesizer
GDDR3 BGA lifted

RSX - Reality Synthesizer
GPUcore BGA lifted

RSX - Reality Synthesizer
BGA lifted
PCB underneath

Nvidia G70 die shot

RSX die, scraped with razorblade by Héctor Martín

BGA Cracking (one of the reasons for YLOD error)

RSX - Reality Synthesizer

The RSX 'Reality Synthesizer' is a proprietary graphics processing unit (GPU) codeveloped by Nvidia and Sony for the PlayStation 3 game console. It is a GPU based on the Nvidia 7800GTX graphics processor and, according to Nvidia, is a G70/G71 (previously known as NV47) hybrid architecture with some modifications. The RSX has separate vertex and pixel shader pipelines. The GPU makes use of 256 MB GDDR3 RAM clocked at 650 MHz with an effective transmission rate of 1.4 GHz and up to 224 MB of the 3.2 GHz XDR main memory via the CPU (480 MB max).

Specifications

  • 500 MHz on 90 nm process (shrunk to 65 nm in 2008 and to 40 nm in 2010)
  • Based on NV47 Chip (Nvidia GeForce 7800 Architecture)
    • early development tools had NV47 with 256 bit local memory interface and 16 ROPs
    • later RSX with 128bit local memory interface and 8 ROPs
  • Little Endian
    • 300+ million transistors
    • Multi-way programmable parallel floating-point shader pipelines
      • Independent pixel/vertex shader architecture
      • 24 parallel pixel-shader ALU pipes clocked @ 550 MHz
        • 5 ALU operations per pipeline, per cycle (2 vector4 , 2 scalar/dual/co-issue and fog ALU, 1 Texture ALU)
        • 27 floating-point operations per pipeline, per cycle
      • 8 parallel vertex pipelines
        • 2 ALU operations per pipeline, per cycle (1 vector4 and 1 scalar, dual issue)
        • 10 FLOPS per pipeline, per cycle
      • Floating Point Operations: 400.4 Gigaflops ((24 * 27 Flops + 8 * 10 Flops) * 550)
    • 24 texture filtering units (TF) and 8 vertex texture addressing units (TA)
      • 24 filtered samples per clock
        • Maximum Texel fillrate: 12.0 GigaTexels per second (24 textures * 500 MHz)
      • 32 unfiltered texture samples per clock, ( 8 TA x 4 texture samples )
    • 8 Render Output units / pixel rendering pipelines
      • Peak pixel fillrate (theoretical): 4.0 Gigapixel per second
      • Maximum Z-buffering sample rate: 8.0 GigaSamples per second (2 Z-samples * 8 ROPs * 500 MHz)
    • Maximum Dot product operations: 51 billion per second (combined with Cell CPU)
    • 128-bit pixel precision offers rendering of scenes with High dynamic range rendering
    • 256 MB GDDR3 RAM at 650 MHz
      • Earlier PS3 Models: Samsung K4J52324QC-SC14 rated max 700MHz
      • Later PS3 Models: Qimonda HYB18H512322AF-14 (seen on CXD2971DGB)
      • 128-bit memory bus width
      • 22.4 GB/s read and write bandwidth
    • Cell FlexIO bus interface
      • Rambus XDR Memory interface bus width: 56bit out of 64bit (serial)
      • 20 GB/s read to the Cell and XDR memory
      • 15 GB/s write to the Cell and XDR memory
    • Support for PSGL (OpenGL ES 1.1 + Nvidia Cg)
    • Support for S3 Texture Compression


More features are revealed in the following chart delineating the differences between the RSX and the nVidia 7800 GTX.

Difference RSX nVidia 7800GTX
GDDR3 Memory bus 128bit 256bit
ROPs 8 16
Post Transform and Lighting Cache 63 max vertices 45 max vertices
Total Texture Cache Per Quad of Pixel Pipes (L1 and L2) 96kB 48kB
CPU interface FlexIO PCI-Express 16x
Technology 40nm/65nm/90nm 110nm

Other RSX features/differences include:

   More shader instructions
       Extra texture lookup logic (helps RSX transport data from XDR)
       Fast vector normalize 

Note that the cache (Post Transform and Lighting Vertext Cache) is located between the vector shader and the triangle setup.

A sample flow of data inside the RSX would see them first processed by 8 vertex shaders. The output are then sent to the 24 active pixel shaders, which can involve the 24 active texture units. Finally, the data is passed to the 8 Raster Operation Pipeline units (ROPs), and on out to the GDDR3. Note that the pixel shaders are grouped into groups of four (called Quads). There are 7 Quads, with 1 redundant, leaving 6 Quads active, which provides us with the 24 active pixel shaders listed above (6 times 4 equals 24). Since each Quad has 96kB of L1 and L2 cache, the total RSX texture cache is 576kB. General RSX features include 2x and 4x hardware anti-aliasing, and support for Shader Model 3.0.

Serial Numbers @ SKU's

The following is a small sample of serial numbers of the RSX by model number.

PS3 Model Mobo Model Mobo serial RSX Serial Die Tech Die Size Remark
CECHAxx COK-001 1-871-868-12 CXD2971GB 90nm 258mm² edepot ps3secrets
CECHAxx COK-001 1-871-868-12 CXD2971AGB 90nm 258mm² reballing.es
CECHAxx COK-001 1-871-868-22 CXD2971DGB 90nm 258mm² reballing.es
CECHAxx COK-001 1-871-868-32 CXD2971DGB 90nm 258mm² reballing.es
CECHAxx COK-001 1-871-868-32 CXD2971AGB 90nm 258mm² reballing.es
CECHBxx COK-001 1-871-868-22 CXD2971DGB 90nm 258mm² edepot ps3secrets
CECHBxx COK-001 1-871-868-32 CXD2971DGB 90nm 258mm² edepot ps3secrets
CECHCxx COK-002 1-873-513-11 CXD2971DGB 90nm 258mm² edepot ps3secrets
CECHCxx COK-002 1-873-513-21 CXD2971GB 90nm 258mm² reballing.es
CECHCxx COK-002 1-873-513-31 CXD2971DGB 90nm 258mm² reballing.es
CECHDxx SKU never released
CECHExx COK-002W 1-873-513-xx -? 90nm 258mm² -
CECHFxx SKU never released
CECHGxx SEM-001 1-875-384-xx CXD2971DGB 90nm 258mm² reballing.es
CECHGxx SEM-001 1-875-384-xx CXD2971BGB
  or:
CXD2971DGB
90nm 258mm² reballing.es
CECHGxx SEM-001 1-875-384-xx CXD2971AGB 90nm 258mm² reballing.es
CECHGxx SEM-001 1-875-384-xx CXD2971DGB 90nm 258mm² edepot ps3secrets
CECHHxx DIA-001 1-875-938-11 CXD2971AGB 90nm 258mm² reballing.es
CECHHxx DIA-001 1-875-938-31 CXD2971-1GB 90nm 258mm² -
CECHHxx DIA-001 1-875-368-11 CXD2971-1GB 90nm 258mm² reballing.es
CECHHxx DIA-001 1-875-368-11 CXD2971AGB 90nm 258mm² reballing.es
CECHHxx DIA-001 1-875-368-11 CXD2971AGB 90nm 258mm² edepot ps3secrets
CECHIxx SKU never released
CECHJxx DIA-002 1-876-912-xx CXD2982GB 65nm ? 186mm² ? -
CECHKxx DIA-002 1-876-912-32 CXD2982BGB 65nm ? 186mm² ? -
CECHKxx DIA-002 1-876-912-42 CXD2982GB 65nm ? 186mm² ? reballing.es
CECHKxx DIA-002 1-876-912-xx CXD2982GB 65nm ? 186mm² ? edepot ps3secrets
CECHLxx VER-001 1-878-196-31 CXD2991GB 65nm ? 186mm² ? reballing.es
CECHLxx VER-001 1-878-196-31 CXD2991GB 65nm ? 186mm² ? edepot ps3secrets
CECHMxx VER-001 1-878-196-31 -? 65nm ? 186mm² ? -
CECHNxx SKU never released
CECHOxx SKU never released
CECHPxx VER-001 1-878-196-31 -? 65nm ? 186mm² ? -
CECHQxx VER-001 1-878-196-31 -? 65nm ? 186mm² ? -
CECH-20xx DYN-001 1-880-055-31 CXD2991CGB 65nm ? 186mm² ? reballing.es
CECH-20xx DYN-001 1-880-055-31 CXD2991EGB 65nm ? 186mm² ? reballing.es
CECH-20xx DYN-001 1-880-055-31 CXD2991EGB 65nm ? 186mm² ? edepot ps3secrets
CECH-20xx DYN-001 1-880-055-31 CXD2991GGB 65nm ? 186mm² ?
CECH-21xx SUR-001 1-881-945-11 CXD5300AGB 40nm ? 114mm² ? reballing.es
CECH-21xx SUR-001 1-881-945-11 CXD5300AGB 40nm ? 114mm² ? edepot ps3secrets
CECH-25xx JTP-001 1-882-481-11 CXD5300A1GB 40nm ? 114mm² ? edepot ps3secrets
CECH-25xx JTP-001 1-882-481-21 CXD5300A1GB 40nm ? 114mm² ?
CECH-25xx JSD-001 1-882-770-11 CXD5300A1GB 40nm ? 114mm² ? edepot ps3secrets
CECH-30xx KTE-001 1-884-749-11 CXD5301DGB 40nm ? 114mm² ? -
CECH-30xx KTE-001 1-884-749-31 CXD5301A1GB 40nm ? 114mm² ? -
CECH-40xx MSX-001 1-886-928-11 CXD5302DGB 40nm ? 114mm² ? -
CECH-40xx MPX-001 1-887-233-11 CXD5302A1GB 40nm ? 114mm² ? - pocketnews dissasembly

Other unspecified: CXD297BGB and CXD2971-1GB (CECHA refurbished? note:lowest FW was 2.30)

Alternative list


Local GDDR3 Memory Physical Structure

  • Total Memory 256MB
  • 2 Partitions (128MB)
  • 64bit bus per partition
  • 8 Banks per partition (16MB)
  • 4096 Pages per bank (4KB) -> 12bit Row Address
  • Memory block in a page -> 9bit Column Address
  • Minimum access granularity = 8 bytes -> same as buswidth between RSX <> GDDR

Software

RSX Memorymap

Although the RSX has 256MB of GDDR3 RAM, not all of it is useable. The last 4MB is reserved for keeping track of the RSX internal state and issued commands. The 4MB of GPU Data contains RAMIN, RAMHT, RAMFC, DMA Objects, Graphic Objects, and the Graphic Context. The following is a breakdown of the address within 256MB of the RSX.

Address Range Size Comment
0000000-FBFFFFF 252 MB Framebuffer
FC00000-FFFFFFF 4 MB GPU Data
FF80000-FFFFFFF 512KB RAMIN: Instance Memory
FF90000-FF93FFF 16KB RAMHT: Hash Table
FFA0000-FFA0FFF 4KB RAMFC: FIFO Context
FFC0000-FFCFFFF 64KB DMA Objects
FFD0000-FFDFFFF 64KB Graphic Objects
FFE0000-FFFFFFF 128KB GRAPH: Graphic Context

Besides local GDDR3 memory, main XDR memory can be accessed by RSX too, which is limited to either:

  • 0MB - 256MB (0x00000000 - 0x0FFFFFFF)
-or-
  • 0MB - 512MB (0x00000000 - 0x1FFFFFFF)

Speed, Bandwidth, and Latency

System bandwith (theoretical maximum):

  • Cell to/from 256MB XDR : 25.6 GB/s
  • Cell to RSX (IOIFO): 20GB/s (practical : 15.8GB/s @ packetsize 128B)
  • Cell from RSX (IOIFI) : 15GB/s (practical : 11.9GB/s @ packetsize 128B)
  • RSX to/from 256MB GDDR3 : 20.8GB/s (@ 650MHz)

Because of the aforementioned layout of the communication path between the different chips, and the latency and bandwidth differences between the various components, there are different access speeds depending on the direction of the access in relation to the source and destination. The following is a chart showing the speed of reads and writes to the GDDR3 and XDR memory from the viewpoint of the Cell and RSX. Note that these are measured speeds (rather than calculated speeds) and they should be worse if RSX and GDDR3 access are involved because these figures were measured when the RSX was clocked at 550Mhz and the GDDR3 memory was clocked at 700Mhz. The shipped PS3 has the RSX clocked in at 500Mhz (front and back end, although the pixel shaders run separately inside at 550Mhz). In addition, the GDDR3 memory was also clocked lower at 650Mhz.

speed table

Processor 256MB XDR 256MB GDDR3
Cell Read 16.8GB/s 16MB/s (15.6MB/s @ 650MHz)
Cell Write 24.9GB/s 4GB/s
RSX Read 15.5GB/s 22.4GB/s (20.8GB/s @ 650MHz)
RSX Write 10.6GB/s 22.4GB/s (20.8GB/s @ 650MHz)

Because of the VERY slow Cell Read speed from the 256MB GDDR3 memory, it is more efficient for the Cell to work in XDR and then have the RSX pull data from XDR and write to GDDR3 for output to the HDMI display. This is why extra texture lookup instructions were included in the RSX to allow loading data from XDR memory (as opposed to the local GDDR3 memory).

ROM Versions

These are the listed RSX ROM (aka Vbios) versions info we have collected from lv1 debug ouput

DEH/DECR-1000:

[INFO]: BE:3.1, SB:DX3.1
rsx:      a01 420/600 vpe:ff shd:3f [AE0000915:0:1:16:b:f:1:1:1]

[INFO]: BE:3.1, SB:DX3.1
rsx:      a02 420/600 vpe:ff shd:3f [F9A458700:0:2:3:b:f:3:1:1][0:0:0:0:0:3]

[INFO]: BE:3.1, SB:DX3.2
rsx:      b01 500/650 vpe:ff shd:5f [AE0000993:0:1:13:c:a:1:4:2][16:3:0:0:1:3:0]

[INFO]: BE:3.1, SB:DX3.2
rsx:      b01 500/600 vpe:ff shd:77 [FCA684200:0:2:2:f:7:3:5:1][0:0:0:0:0]

[INFO]: BE:3.1, SB:DX3.2
rsx:      b01 500/650 vpe:ff shd:5f [AE0000993:0:1:13:c:a:1:4:2][16:3:0:0:1:3:0]

[INFO]: BE:3.1, SB:DX3.2
rsx:      b01 500/650 vpe:ff shd:7d [G1A778601:1:2:15:7:10:3:7:2][16:3:0:0:1:3:0]

[INFO]: BE:3.1, SB:DX3.2
rsx:      b02 500/650 vpe:ff shd:3f  [G2A874100:1:2:e:4:6:3:9:2][16:3:0:0:1:2:1][0:0:0]

[INFO]: BE:3.1, SB:DX3.2
rsx:      b03 500/650 vpe:ff shd:7b  [GAB886100:1:2:17:f:5:3:f:2][16:3:0:0:1:3:1][0:0:0]

[INFO]: BE:3.1, SB:DX3.2
rsx: b03 500/650 vpe:ff shd:7b [GAB886100:1:2:4:7:5:3:f:2][16:3:0:0:1:3:1][0:0:0]

[INFO]: BE:3.1, SB:DX3.2
rsx: b07 500/650 vpe:ff shd:3f [J3E106900:1:2:c:b:6:3:12:1][16:3:2:0:1:3:1][0:0:0]

[INFO]: BE:3.1, SB:DX3.2
rsx:      b07 500/650 vpe:ff shd:3f  [J3E107200:1:2:a:6:3:3:12:1][16:3:2:0:1:3:1][0:0:0]

[INFO]: BE:3.1, SB:DX3.2
rsx:      b07 500/650 vpe:ff shd:3f  [J3E078500:1:2:11:c:f:3:12:1][16:3:2:0:1:3:1][0:0:0]

RETAIL:

[INFO]: BE:3.1, SB:DX3.1
rsx:      b08 1f4/28a vpe:ff shd:3f  [AP0004687:1:1:14:13:a:2:f:1][16:3:1:1:1:3:1][0:0:0]

Speculatively it is likely that the very first numbers are the actual rom version (a01, b01, b03, b07, b08...) despite Sony's documentation claiming otherwise, DECR-1000 units with rom version b07 and above (and perhaps some others that have not been encounter) are not capable of running any firmware lower than 1.60 (from sdk 160.008) this is because the rom version is unknown/unsupported in older lv1 which will fail to initialize the RSX hardware and will cause lv1 to output a "rsx rom abort!" message, this will in turn create an exception early in lv2 boot process as it tries to use the RSX and creates a hard brick several RSX related errors such as "lv2(2): # __rsxaudio_intr_create_thread 983 ffffffff" or "graphics error 512 : 00012625 c221bbb0" ; "lv2(2): page fault handler (DSI): invalid access address 0x795d00e8!".

There is nothing in the documentation warning you about this and there is nothing preventing (or a legitimate developer) to install an unsupported firmware as the vsh allows updating to 1.00 or higher and the min praxis for those units is actually lower than 1.00. Should this issue occur to you, other than sending the unit back to Sony for servicing, the only way to fix this is to flash an ebootrom (as lv0 still runs fine and is in charge of handling flashing the system memory through lcnslsrv) the problem with that is that sony never released/issue an ebootrom for a firmware higher than 1.00.002 , so officially one would have no choice but to return the unit, that said, considering the ebootrom format is not rocket science and is actually documented (it's a very slight variation of the coreos package format, there are no specific checks whatsoever preventing you from crafting your own, it is not hashed, nor encrypted), you could (as we did) convert the PUP file of a higher firmware and flash it into the unit to get a full recovery.

RSX Libraries

The RSX is dedicated to 3D graphics, and developers are able to use different API libraries to access its features. The easiest way is to use high level PSGL, which is basicially OpenGL|ES with programmable pipeline added in - but hardly anyone uses PSGL these days, preferring to use the native GPU command buffer generation library, libgcm. At a lower level developers can use LibGCM, which is an API that talks to the RSX at a lower level. PSGL is actually implemented on top of LibGCM. For the advanced programmer, you can program the RSX by sending commands to it directly using C or assembly. This can be done by setting up commands (via FIFO Context) and DMA Objects and issuing them to the RSX via DMA calls.

Drivers (WiP/reference)

PSL1GHT

Other References