Cooling

From PS3 Developer wiki
Revision as of 17:21, 6 June 2013 by Sandungas (talk | contribs) (→‎type 5: better notes)
Jump to navigation Jump to search

Relative: see also Cooling,Thermal

Cooling per SKU

PS3 Model Mobo Model Heatsink Model H.S. Compatibility Fan Model Fan Compatibility Remark
CECHAxx COK-001 Furukawa Electric 1N10076655 A, B, C, E NMB-MAT BG1402-B045-P00 (19 blade) A, B, C, E type 1
CECHBxx COK-001 Furukawa Electric 1N10076655 A, B, C, E NMB-MAT BG1402-B045-P00 (19 blade) A, B, C, E type 1
CECHCxx COK-002 Furukawa Electric 1N10076655 A, B, C, E NMB-MAT BG1402-B045-P00 (19 blade) A, B, C, E type 1
CECHDxx SKU never released
CECHExx COK-002
   or
COK-002W
NMB-MAT BG1402-B045-P00 (15 blade)
Nidec G14T12BS1AF-56J14
CECHExx type 1
CECHFxx SKU never released
CECHGxx SEM-001 type 2
CECHHxx DIA-001 type 3
CECHIxx SKU never released
CECHJxx DIA-002 ?type 3?
CECHKxx DIA-002 ?type 3?
CECHLxx VER-001 L, M, P, Q L, M, P, Q type 4
CECHMxx VER-001 L, M, P, Q L, M, P, Q type 4
CECHNxx SKU never released
CECHOxx SKU never released
CECHPxx VER-001 L, M, P, Q L, M, P, Q type 4
CECHQxx VER-001 L, M, P, Q L, M, P, Q type 4
CECH-20xx DYN-001 20xx, 21xx, 25xx Nidec G10C12MS1AH-56J14 or
Delta KFB1012HE
20xx, 21xx, 25xx type 5
CECH-21xx SUR-001 20xx, 21xx, 25xx Nidec G10C12MS2AH-56J14 or
Delta KSB1012HE
20xx, 21xx, 25xx type 5
CECH-25xx JTP-001 20xx, 21xx, 25xx Nidec G10C12MS2AH-56J14 or
Delta KSB1012HE
20xx, 21xx, 25xx type 5
CECH-25xx JSD-001 20xx, 21xx, 25xx NMB-MAT BG1004-B045-P00 20xx, 21xx, 25xx type 5
CECH-30xx KTE-001 30xx Nidec G80E12NS1ZN-56J14 30xx type 6
CECH-40xx MSX-001 40xx Nidec G75P12NS1ZN-56J14 40xx type 7
CECH-40xx MPX-001 40xx Nidec G75P12NS1ZN-56J14 40xx type 7

Heatsink overview

type 1

as seen on: CECHAxx, CECHBxx, CECHCxx, CECHExx

Furukawa Electric 1N10076655

type 2

CECHGxx

type 3

CECHHxx (?+ CECHJxx, CECHKxx?)

type 4

CECHLxx, CECHMxx, CECHPxx, CECHQxx

type 5

First 3 generations of PS3 slim : CECH-20xx, CECH-21xx, CECH-25xx

In this models, the airflow passes inside the power supply, so can be considered part of the "air tunnel"

The surface closer to the center of the fan is the CELL... and the other is RSX... the air passes first trought CELL metal elements (cooler) and then passes trought RSX elements (hotter), the copper pipes are for CELL surface and are connected to a "secondary" cooling metal block placed laterally inside the air tunnel

revision 1

CECH-20xx

  • Notes (identification)
    • Is the only "type 5" heatsink with horizontal plates, and vertical "columns". The horizontal plates allows the airflow to spread in radial directions from the fan center, and consequently to enter in the power supply in angles
    • The vertical "columns" doesnt seems to be copper pipes and are soldered/drilled in the RSX metal block, this manufacturing process left some marks that are visibles in the bottom view

revision 2

CECH-20xx

  • Notes (identification)
    • CELL surface has no drill/holes marks, and one corner is "out" of the plate, the secondary cooling metal block (after the copper pipe) has 12 vertical plates
    • RSX has 2 drills/holes at the sides

revision 3

CECH-20xx

  • Notes (identification)
    • CELL surface has 12 drills/holes that are partially visibles in the bottom and top views
    • Doesnt seems to have a copper pipe in the bottom view. but some copper is partially visible in the top view so is supposed it has a copper pipe over the plate (that is flanked by 2 paralell lines visibles in the bottom view)

revision 4

CECH-21xx

  • Notes (identification)
    • CELL surface has 4 holes/drills
    • RSX surface has 5 holes/drills

revision 5

CECH-25xx

  • Notes (identification)
    • CELL copper pipe is soldered and glued and gets out of CELL surface vertically, and is connected to a secondary CELL cooling block with 11 plates placed in a side, both are visibles from a bottom view (the 2 lines in paralell to the copper pipe in the bottom view are the base of the secondary CELL cooling metal block)
    • CELL primary cooling block is glued to CELL surface
    • RSX cooling block has 16 verticall plates, and is drilled/soldered by 4 points to the bottom plate of the heatsink that is cropped. This block is mobile thanks to this areas cropped and the drilled holes (can be moved up or down some milimeters)
    • The 2 surfaces are made of alluminium but with a different alloy (CELL is harder to polish and darker)

type 6

as seen on: CECH-30xx

type 7

CECH-40xx

Fan overview

14cm diameter

Delta Electronics KFB1412H

Delta Electronics KFB1412H
Diameter: 14cm
Blades: 17
Cablelength: 9cm
Voltage: 12V
Current: 2.0A 

Nidec D14F12BS1-01H1

Nidec D14F12BS1-01H1
Diameter: 14cm
Blades: 15
Cablelength: 12cm
Voltage: 12V
Current: 2.65A 

Nidec G14T12BS1AF-56J14

Nidec G14T12BS1AF-56J14
Diameter: 14cm
Blades: 15
Cablelength: 18cm
Voltage: 12V
Current: 1.75A 

Nidec G14T12BS2AF-56J14

Nidec G14T12BS2AF-56J14
Diameter: 14cm
Blades: 15
Cablelength: 9cm
Voltage: 12V
Current: 1.75A 

NMB-MAT BG1402-B045-P00 (15 blade)

NMB-MAT BG1402-B045-P00 (15 blade)
Diameter: 14cm
Blades: 15
Cablelength: 18cm
Voltage: 12V
Current: 2.20A

NMB-MAT BG1402-B045-P00 (19 blade)

NMB-MAT BG1402-B045-P00 (19 blade)
Diameter: 14cm
Blades: 15
Cablelength: 15cm
Voltage: 12V
Current: 2.90A

10cm diameter

Delta KFB1012HE

Delta KFB1012HE
Diameter: 10cm
Blades: 17
Cablelength:
Voltage: 12V
Current: 1.30A 

Nidec G10C12MS1AH-56J14

Nidec G10C12MS1AH-56J14
Diameter: 10cm
Blades: 17
Cablelength:
Voltage: 12V
Current: 1.38A 

Nidec G10C12MS2AH-56J14

Nidec G10C12MS2AH-56J14
Diameter: 10cm
Blades: 17
Cablelength: 17cm
Voltage: 12V
Current: 1.67A

Sanitation

Template:Console