Cooling
Jump to navigation
Jump to search
Relative: see also Cooling,Thermal
Cooling per SKU
Heatsink overview
type 1
as seen on: CECHAxx, CECHBxx, CECHCxx, CECHExx
type 2
type 3
CECHHxx (?+ CECHJxx, CECHKxx?)
type 4
CECHLxx, CECHMxx, CECHPxx, CECHQxx
type 5
First 3 generations of PS3 slim : CECH-20xx, CECH-21xx, CECH-25xx
In this models, the airflow passes inside the power supply, so can be considered part of the "air tunnel"
The surface closer to the center of the fan is the CELL... and the other is RSX... the air passes first trought CELL metal elements (cooler) and then passes trought RSX elements (hotter), the copper pipes are for CELL surface and are connected to a "secondary" cooling metal block placed laterally inside the air tunnel
revision 1
- Notes (identification)
- Is the only "type 5" heatsink with horizontal plates, and vertical "columns". The horizontal plates allows the airflow to spread in radial directions from the fan center, and consequently to enter in the power supply in angles
- The vertical "columns" doesnt seems to be copper pipes and are soldered/drilled in the RSX metal block, this manufacturing process left some marks that are visibles in the bottom view
revision 2
- Notes (identification)
- CELL surface has no drill/holes marks, and one corner is "out" of the plate, the secondary cooling metal block (after the copper pipe) has 12 vertical plates
- RSX has 2 drills/holes at the sides
revision 3
- Notes (identification)
- CELL surface has 12 drills/holes that are partially visibles in the bottom and top views
- Doesnt seems to have a copper pipe in the bottom view. but some copper is partially visible in the top view so is supposed it has a copper pipe over the plate (that is flanked by 2 paralell lines visibles in the bottom view)
revision 4
- Notes (identification)
- CELL surface has 4 holes/drills
- RSX surface has 5 holes/drills
revision 5
- Notes (identification)
- CELL copper pipe is soldered and glued and gets out of CELL surface vertically, and is connected to a secondary CELL cooling block with 11 plates placed in a side, both are visibles from a bottom view (the 2 lines in paralell to the copper pipe in the bottom view are the base of the secondary CELL cooling metal block)
- CELL primary cooling block is glued to CELL surface
- RSX cooling block has 16 verticall plates, and is drilled/soldered by 4 points to the bottom plate of the heatsink that is cropped. This block is mobile thanks to this areas cropped and the drilled holes (can be moved up or down some milimeters)
- The 2 surfaces are made of alluminium but with a different alloy (CELL is harder to polish and darker)
type 6
as seen on: CECH-30xx
type 7
Fan overview
14cm diameter
Delta Electronics KFB1412H
Delta Electronics KFB1412H Diameter: 14cm Blades: 17 Cablelength: 9cm Voltage: 12V Current: 2.0A
Nidec D14F12BS1-01H1
Nidec D14F12BS1-01H1 Diameter: 14cm Blades: 15 Cablelength: 12cm Voltage: 12V Current: 2.65A
Nidec G14T12BS1AF-56J14
Nidec G14T12BS1AF-56J14 Diameter: 14cm Blades: 15 Cablelength: 18cm Voltage: 12V Current: 1.75A
Nidec G14T12BS2AF-56J14
Nidec G14T12BS2AF-56J14 Diameter: 14cm Blades: 15 Cablelength: 9cm Voltage: 12V Current: 1.75A
NMB-MAT BG1402-B045-P00 (15 blade)
NMB-MAT BG1402-B045-P00 (15 blade) Diameter: 14cm Blades: 15 Cablelength: 18cm Voltage: 12V Current: 2.20A
NMB-MAT BG1402-B045-P00 (19 blade)
NMB-MAT BG1402-B045-P00 (19 blade) Diameter: 14cm Blades: 15 Cablelength: 15cm Voltage: 12V Current: 2.90A
10cm diameter
Delta KFB1012HE
Delta KFB1012HE Diameter: 10cm Blades: 17 Cablelength: Voltage: 12V Current: 1.30A
Nidec G10C12MS1AH-56J14
Nidec G10C12MS1AH-56J14 Diameter: 10cm Blades: 17 Cablelength: Voltage: 12V Current: 1.38A
Nidec G10C12MS2AH-56J14
Nidec G10C12MS2AH-56J14 Diameter: 10cm Blades: 17 Cablelength: 17cm Voltage: 12V Current: 1.67A